/* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */ /* * Copyright (C) 2012-2014, 2018-2019, 2021-2024 Intel Corporation * Copyright (C) 2013-2015 Intel Mobile Communications GmbH * Copyright (C) 2016-2017 Intel Deutschland GmbH */ #ifndef __iwl_fw_api_mac_cfg_h__ #define __iwl_fw_api_mac_cfg_h__ #include "mac.h" /** * enum iwl_mac_conf_subcmd_ids - mac configuration command IDs */ enum iwl_mac_conf_subcmd_ids { … }; #define IWL_P2P_NOA_DESC_COUNT … /** * struct iwl_p2p_noa_attr - NOA attr contained in probe resp FW notification * * @id: attribute id * @len_low: length low half * @len_high: length high half * @idx: instance of NoA timing * @ctwin: GO's ct window and pwer save capability * @desc: NoA descriptor * @reserved: reserved for alignment purposes */ struct iwl_p2p_noa_attr { … } __packed; #define IWL_PROBE_RESP_DATA_NO_CSA … /** * struct iwl_probe_resp_data_notif - notification with NOA and CSA counter * * @mac_id: the mac which should send the probe response * @noa_active: notifies if the noa attribute should be handled * @noa_attr: P2P NOA attribute * @csa_counter: current csa counter * @reserved: reserved for alignment purposes */ struct iwl_probe_resp_data_notif { … } __packed; /* PROBE_RESPONSE_DATA_NTFY_API_S_VER_1 */ /** * struct iwl_missed_vap_notif - notification of missing vap detection * * @mac_id: the mac for which the ucode sends the notification for * @num_beacon_intervals_elapsed: beacons elpased with no vap profile inside * @profile_periodicity: beacons period to have our profile inside * @reserved: reserved for alignment purposes */ struct iwl_missed_vap_notif { … } __packed; /* MISSED_VAP_NTFY_API_S_VER_1 */ /** * struct iwl_channel_switch_start_notif_v1 - Channel switch start notification * * @id_and_color: ID and color of the MAC */ struct iwl_channel_switch_start_notif_v1 { … } __packed; /* CHANNEL_SWITCH_START_NTFY_API_S_VER_1 */ /** * struct iwl_channel_switch_start_notif - Channel switch start notification * * @link_id: FW link id */ struct iwl_channel_switch_start_notif { … } __packed; /* CHANNEL_SWITCH_START_NTFY_API_S_VER_3 */ #define CS_ERR_COUNT_ERROR … #define CS_ERR_LONG_DELAY_AFTER_CS … #define CS_ERR_LONG_TX_BLOCK … #define CS_ERR_TX_BLOCK_TIMER_EXPIRED … /** * struct iwl_channel_switch_error_notif_v1 - Channel switch error notification * * @mac_id: the mac for which the ucode sends the notification for * @csa_err_mask: mask of channel switch error that can occur */ struct iwl_channel_switch_error_notif_v1 { … } __packed; /* CHANNEL_SWITCH_ERROR_NTFY_API_S_VER_1 */ /** * struct iwl_channel_switch_error_notif - Channel switch error notification * * @link_id: FW link id * @csa_err_mask: mask of channel switch error that can occur */ struct iwl_channel_switch_error_notif { … } __packed; /* CHANNEL_SWITCH_ERROR_NTFY_API_S_VER_2 */ /** * struct iwl_cancel_channel_switch_cmd - Cancel Channel Switch command * * @id: the id of the link or mac that should cancel the channel switch */ struct iwl_cancel_channel_switch_cmd { … } __packed; /* MAC_CANCEL_CHANNEL_SWITCH_S_VER_1 */ /** * struct iwl_chan_switch_te_cmd - Channel Switch Time Event command * * @mac_id: MAC ID for channel switch * @action: action to perform, see &enum iwl_ctxt_action * @tsf: beacon tsf * @cs_count: channel switch count from CSA/eCSA IE * @cs_delayed_bcn_count: if set to N (!= 0) GO/AP can delay N beacon intervals * at the new channel after the channel switch, otherwise (N == 0) expect * beacon right after the channel switch. * @cs_mode: 1 - quiet, 0 - otherwise * @reserved: reserved for alignment purposes */ struct iwl_chan_switch_te_cmd { … } __packed; /* MAC_CHANNEL_SWITCH_TIME_EVENT_S_VER_2 */ /** * struct iwl_mac_low_latency_cmd - set/clear mac to 'low-latency mode' * * @mac_id: MAC ID to whom to apply the low-latency configurations * @low_latency_rx: 1/0 to set/clear Rx low latency direction * @low_latency_tx: 1/0 to set/clear Tx low latency direction * @reserved: reserved for alignment purposes */ struct iwl_mac_low_latency_cmd { … } __packed; /* MAC_LOW_LATENCY_API_S_VER_1 */ /** * struct iwl_mac_client_data - configuration data for client MAC context * * @is_assoc: 1 for associated state, 0 otherwise * @esr_transition_timeout: the timeout required by the AP for the * eSR transition. * Available only from version 2 of the command. * This value comes from the EMLSR transition delay in the EML * Capabilities subfield. * @medium_sync_delay: the value as it appears in P802.11be_D2.2 Figure 9-1002j. * @assoc_id: unique ID assigned by the AP during association * @reserved1: alignment * @data_policy: see &enum iwl_mac_data_policy * @reserved2: alignment * @ctwin: client traffic window in TU (period after TBTT when GO is present). * 0 indicates that there is no CT window. */ struct iwl_mac_client_data { … } __packed; /* MAC_CONTEXT_CONFIG_CLIENT_DATA_API_S_VER_2 */ /** * struct iwl_mac_p2p_dev_data - configuration data for P2P device MAC context * * @is_disc_extended: if set to true, P2P Device discoverability is enabled on * other channels as well. This should be to true only in case that the * device is discoverable and there is an active GO. Note that setting this * field when not needed, will increase the number of interrupts and have * effect on the platform power, as this setting opens the Rx filters on * all macs. */ struct iwl_mac_p2p_dev_data { … } __packed; /* MAC_CONTEXT_CONFIG_P2P_DEV_DATA_API_S_VER_1 */ /** * enum iwl_mac_config_filter_flags - MAC context configuration filter flags * * @MAC_CFG_FILTER_PROMISC: accept all data frames * @MAC_CFG_FILTER_ACCEPT_CONTROL_AND_MGMT: pass all management and * control frames to the host * @MAC_CFG_FILTER_ACCEPT_GRP: accept multicast frames * @MAC_CFG_FILTER_ACCEPT_BEACON: accept beacon frames * @MAC_CFG_FILTER_ACCEPT_BCAST_PROBE_RESP: accept broadcast probe response * @MAC_CFG_FILTER_ACCEPT_PROBE_REQ: accept probe requests */ enum iwl_mac_config_filter_flags { … }; /* MAC_FILTER_FLAGS_MASK_E_VER_1 */ /** * struct iwl_mac_config_cmd - command structure to configure MAC contexts in * MLD API * ( MAC_CONTEXT_CONFIG_CMD = 0x8 ) * * @id_and_color: ID and color of the MAC * @action: action to perform, see &enum iwl_ctxt_action * @mac_type: one of &enum iwl_mac_types * @local_mld_addr: mld address * @reserved_for_local_mld_addr: reserved * @filter_flags: combination of &enum iwl_mac_config_filter_flags * @he_support: does this MAC support HE * @he_ap_support: HE AP enabled, "pseudo HE", no trigger frame handling * @eht_support: does this MAC support EHT. Requires he_support * @nic_not_ack_enabled: mark that the NIC doesn't support receiving * ACK-enabled AGG, (i.e. both BACK and non-BACK frames in single AGG). * If the NIC is not ACK_ENABLED it may use the EOF-bit in first non-0 * len delim to determine if AGG or single. * @client: client mac data * @p2p_dev: mac data for p2p device */ struct iwl_mac_config_cmd { … } __packed; /* MAC_CONTEXT_CONFIG_CMD_API_S_VER_2 */ /** * enum iwl_link_ctx_modify_flags - indicate to the fw what fields are being * modified in &iwl_link_ctx_cfg_cmd * * @LINK_CONTEXT_MODIFY_ACTIVE: covers iwl_link_ctx_cfg_cmd::active * @LINK_CONTEXT_MODIFY_RATES_INFO: covers iwl_link_ctx_cfg_cmd::cck_rates, * iwl_link_ctx_cfg_cmd::ofdm_rates, * iwl_link_ctx_cfg_cmd::cck_short_preamble, * iwl_link_ctx_cfg_cmd::short_slot * @LINK_CONTEXT_MODIFY_PROTECT_FLAGS: covers * iwl_link_ctx_cfg_cmd::protection_flags * @LINK_CONTEXT_MODIFY_QOS_PARAMS: covers iwl_link_ctx_cfg_cmd::qos_flags, * iwl_link_ctx_cfg_cmd::ac, * @LINK_CONTEXT_MODIFY_BEACON_TIMING: covers iwl_link_ctx_cfg_cmd::bi, * iwl_link_ctx_cfg_cmd::dtim_interval, * iwl_link_ctx_cfg_cmd::dtim_time, * iwl_link_ctx_cfg_cmd::dtim_tsf, * iwl_link_ctx_cfg_cmd::assoc_beacon_arrive_time. * This flag can be set only once after assoc. * @LINK_CONTEXT_MODIFY_HE_PARAMS: covers * iwl_link_ctx_cfg_cmd::htc_trig_based_pkt_ext * iwl_link_ctx_cfg_cmd::rand_alloc_ecwmin, * iwl_link_ctx_cfg_cmd::rand_alloc_ecwmax, * iwl_link_ctx_cfg_cmd::trig_based_txf, * iwl_link_ctx_cfg_cmd::bss_color, * iwl_link_ctx_cfg_cmd::ndp_fdbk_buff_th_exp, * iwl_link_ctx_cfg_cmd::ref_bssid_addr * iwl_link_ctx_cfg_cmd::bssid_index, * iwl_link_ctx_cfg_cmd::frame_time_rts_th. * This flag can be set any time. * @LINK_CONTEXT_MODIFY_BSS_COLOR_DISABLE: covers * iwl_link_ctx_cfg_cmd::bss_color_disable * @LINK_CONTEXT_MODIFY_EHT_PARAMS: covers iwl_link_ctx_cfg_cmd::puncture_mask. * This flag can be set only if the MAC that this link relates to has * eht_support set to true. No longer used since _VER_3 of this command. * @LINK_CONTEXT_MODIFY_ALL: set all above flags */ enum iwl_link_ctx_modify_flags { … }; /* LINK_CONTEXT_MODIFY_MASK_E_VER_1 */ /** * enum iwl_link_ctx_protection_flags - link protection flags * @LINK_PROT_FLG_TGG_PROTECT: 11g protection when transmitting OFDM frames, * this will require CCK RTS/CTS2self. * RTS/CTS will protect full burst time. * @LINK_PROT_FLG_HT_PROT: enable HT protection * @LINK_PROT_FLG_FAT_PROT: protect 40 MHz transmissions * @LINK_PROT_FLG_SELF_CTS_EN: allow CTS2self */ enum iwl_link_ctx_protection_flags { … }; /* LINK_PROTECT_FLAGS_E_VER_1 */ /** * enum iwl_link_ctx_flags - link context flags * * @LINK_FLG_BSS_COLOR_DIS: BSS color disable, don't use the BSS * color for RX filter but use MAC header * enabled AGG, i.e. both BACK and non-BACK frames in a single AGG * @LINK_FLG_MU_EDCA_CW: indicates that there is an element of MU EDCA * parameter set, i.e. the backoff counters for trig-based ACs * @LINK_FLG_RU_2MHZ_BLOCK: indicates that 26-tone RU OFDMA transmission are * not allowed (as there are OBSS that might classify such transmissions as * radar pulses). * @LINK_FLG_NDP_FEEDBACK_ENABLED: mark support for NDP feedback and change * of threshold */ enum iwl_link_ctx_flags { … }; /* LINK_CONTEXT_FLAG_E_VER_1 */ /** * struct iwl_link_config_cmd - command structure to configure the LINK context * in MLD API * ( LINK_CONFIG_CMD =0x9 ) * * @action: action to perform, see &enum iwl_ctxt_action * @link_id: the id of the link that this cmd configures * @mac_id: interface ID. Relevant only if action is FW_CTXT_ACTION_ADD * @phy_id: PHY index. Can be changed only if the link was inactive * (and stays inactive). If the link is active (or becomes active), * this field is ignored. * @local_link_addr: the links MAC address. Can be changed only if the link was * inactive (and stays inactive). If the link is active * (or becomes active), this field is ignored. * @reserved_for_local_link_addr: reserved * @modify_mask: from &enum iwl_link_ctx_modify_flags, selects what to change. * Relevant only if action is FW_CTXT_ACTION_MODIFY * @active: indicates whether the link is active or not * @listen_lmac: indicates whether the link should be allocated on the Listen * Lmac or on the Main Lmac. Cannot be changed on an active Link. * Relevant only for eSR. * @reserved1: in version 2, listen_lmac became reserved * @cck_rates: basic rates available for CCK * @ofdm_rates: basic rates available for OFDM * @cck_short_preamble: 1 for enabling short preamble, 0 otherwise * @short_slot: 1 for enabling short slots, 0 otherwise * @protection_flags: combination of &enum iwl_link_ctx_protection_flags * @qos_flags: from &enum iwl_mac_qos_flags * @ac: one iwl_mac_qos configuration for each AC * @htc_trig_based_pkt_ext: default PE in 4us units * @rand_alloc_ecwmin: random CWmin = 2**ECWmin-1 * @rand_alloc_ecwmax: random CWmax = 2**ECWmax-1 * @ndp_fdbk_buff_th_exp: set exponent for the NDP feedback buffered threshold * @trig_based_txf: MU EDCA Parameter set for the trigger based traffic queues * @bi: beacon interval in TU, applicable only when associated * @dtim_interval: DTIM interval in TU. * Relevant only for GO, otherwise this is offloaded. * @puncture_mask: puncture mask for EHT (removed in VER_3) * @frame_time_rts_th: HE duration RTS threshold, in units of 32us * @flags: a combination from &enum iwl_link_ctx_flags * @flags_mask: what of %flags have changed. Also &enum iwl_link_ctx_flags * Below fields are for multi-bssid: * @ref_bssid_addr: reference BSSID used by the AP * @reserved_for_ref_bssid_addr: reserved * @bssid_index: index of the associated VAP * @bss_color: 11ax AP ID that is used in the HE SIG-A to mark inter BSS frame * @spec_link_id: link_id as the AP knows it * @reserved2: alignment * @ibss_bssid_addr: bssid for ibss * @reserved_for_ibss_bssid_addr: reserved * @reserved3: reserved for future use */ struct iwl_link_config_cmd { … } __packed; /* LINK_CONTEXT_CONFIG_CMD_API_S_VER_1, _VER_2, _VER_3 */ /* Currently FW supports link ids in the range 0-3 and can have * at most two active links for each vif. */ #define IWL_MVM_FW_MAX_ACTIVE_LINKS_NUM … #define IWL_MVM_FW_MAX_LINK_ID … /** * enum iwl_fw_sta_type - FW station types * @STATION_TYPE_PEER: represents a peer - AP in BSS, a TDLS sta, a client in * P2P. * @STATION_TYPE_BCAST_MGMT: The station used to send beacons and * probe responses. Also used for traffic injection in sniffer mode * @STATION_TYPE_MCAST: the station used for BCAST / MCAST in GO. Will be * suspended / resumed at the right timing depending on the clients' * power save state and the DTIM timing * @STATION_TYPE_AUX: aux sta. In the FW there is no need for a special type * for the aux sta, so this type is only for driver - internal use. */ enum iwl_fw_sta_type { … }; /* STATION_TYPE_E_VER_1 */ /** * struct iwl_mvm_sta_cfg_cmd - cmd structure to add a peer sta to the uCode's * station table * ( STA_CONFIG_CMD = 0xA ) * * @sta_id: index of station in uCode's station table * @link_id: the id of the link that is used to communicate with this sta * @peer_mld_address: the peers mld address * @reserved_for_peer_mld_address: reserved * @peer_link_address: the address of the link that is used to communicate * with this sta * @reserved_for_peer_link_address: reserved * @station_type: type of this station. See &enum iwl_fw_sta_type * @assoc_id: for GO only * @beamform_flags: beam forming controls * @mfp: indicates whether the STA uses management frame protection or not. * @mimo: indicates whether the sta uses mimo or not * @mimo_protection: indicates whether the sta uses mimo protection or not * @ack_enabled: indicates that the AP supports receiving ACK- * enabled AGG, i.e. both BACK and non-BACK frames in a single AGG * @trig_rnd_alloc: indicates that trigger based random allocation * is enabled according to UORA element existence * @tx_ampdu_spacing: minimum A-MPDU spacing: * 4 - 2us density, 5 - 4us density, 6 - 8us density, 7 - 16us density * @tx_ampdu_max_size: maximum A-MPDU length: 0 - 8K, 1 - 16K, 2 - 32K, * 3 - 64K, 4 - 128K, 5 - 256K, 6 - 512K, 7 - 1024K. * @sp_length: the size of the SP in actual number of frames * @uapsd_acs: 4 LS bits are trigger enabled ACs, 4 MS bits are the deliver * enabled ACs. * @pkt_ext: optional, exists according to PPE-present bit in the HE/EHT-PHY * capa * @htc_flags: which features are supported in HTC */ struct iwl_mvm_sta_cfg_cmd { … } __packed; /* STA_CMD_API_S_VER_1 */ /** * struct iwl_mvm_aux_sta_cmd - command for AUX STA configuration * ( AUX_STA_CMD = 0xB ) * * @sta_id: index of aux sta to configure * @lmac_id: ? * @mac_addr: mac addr of the auxilary sta * @reserved_for_mac_addr: reserved */ struct iwl_mvm_aux_sta_cmd { … } __packed; /* AUX_STA_CMD_API_S_VER_1 */ /** * struct iwl_mvm_remove_sta_cmd - a cmd structure to remove a sta added by * STA_CONFIG_CMD or AUX_STA_CONFIG_CMD * ( STA_REMOVE_CMD = 0xC ) * * @sta_id: index of station to remove */ struct iwl_mvm_remove_sta_cmd { … } __packed; /* REMOVE_STA_API_S_VER_1 */ /** * struct iwl_mvm_sta_disable_tx_cmd - disable / re-enable tx to a sta * ( STA_DISABLE_TX_CMD = 0xD ) * * @sta_id: index of the station to disable tx to * @disable: indicates if to disable or re-enable tx */ struct iwl_mvm_sta_disable_tx_cmd { … } __packed; /* STA_DISABLE_TX_API_S_VER_1 */ /** * enum iwl_mvm_fw_esr_recommendation - FW recommendation code * @ESR_RECOMMEND_LEAVE: recommendation to leave esr * @ESR_FORCE_LEAVE: force exiting esr * @ESR_RECOMMEND_ENTER: recommendation to enter esr */ enum iwl_mvm_fw_esr_recommendation { … }; /* ESR_MODE_RECOMMENDATION_CODE_API_E_VER_1 */ /** * struct iwl_mvm_esr_mode_notif - FWs recommendation/force for esr mode * * @action: the action to apply on esr state. See &iwl_mvm_fw_esr_recommendation */ struct iwl_mvm_esr_mode_notif { … } __packed; /* ESR_MODE_RECOMMENDATION_NTFY_API_S_VER_1 */ #endif /* __iwl_fw_api_mac_cfg_h__ */