// SPDX-License-Identifier: GPL-2.0-or-later /* * DVB USB Linux driver for Anysee E30 DVB-C & DVB-T USB2.0 receiver * * Copyright (C) 2007 Antti Palosaari <[email protected]> * * TODO: * - add smart card reader support for Conditional Access (CA) * * Card reader in Anysee is nothing more than ISO 7816 card reader. * There is no hardware CAM in any Anysee device sold. * In my understanding it should be implemented by making own module * for ISO 7816 card reader, like dvb_ca_en50221 is implemented. This * module registers serial interface that can be used to communicate * with any ISO 7816 smart card. * * Any help according to implement serial smart card reader support * is highly welcome! */ #include "anysee.h" #include "dvb-pll.h" #include "tda1002x.h" #include "mt352.h" #include "mt352_priv.h" #include "zl10353.h" #include "tda18212.h" #include "cx24116.h" #include "stv0900.h" #include "stv6110.h" #include "isl6423.h" #include "cxd2820r.h" DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); static int anysee_ctrl_msg(struct dvb_usb_device *d, u8 *sbuf, u8 slen, u8 *rbuf, u8 rlen) { … } static int anysee_read_reg(struct dvb_usb_device *d, u16 reg, u8 *val) { … } static int anysee_write_reg(struct dvb_usb_device *d, u16 reg, u8 val) { … } /* write single register with mask */ static int anysee_wr_reg_mask(struct dvb_usb_device *d, u16 reg, u8 val, u8 mask) { … } /* read single register with mask */ static int anysee_rd_reg_mask(struct dvb_usb_device *d, u16 reg, u8 *val, u8 mask) { … } static int anysee_get_hw_info(struct dvb_usb_device *d, u8 *id) { … } static int anysee_streaming_ctrl(struct dvb_frontend *fe, int onoff) { … } static int anysee_led_ctrl(struct dvb_usb_device *d, u8 mode, u8 interval) { … } static int anysee_ir_ctrl(struct dvb_usb_device *d, u8 onoff) { … } /* I2C */ static int anysee_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msg, int num) { … } static u32 anysee_i2c_func(struct i2c_adapter *adapter) { … } static struct i2c_algorithm anysee_i2c_algo = …; static int anysee_mt352_demod_init(struct dvb_frontend *fe) { … } /* Callbacks for DVB USB */ static struct tda10023_config anysee_tda10023_config = …; static struct mt352_config anysee_mt352_config = …; static struct zl10353_config anysee_zl10353_config = …; static struct zl10353_config anysee_zl10353_tda18212_config2 = …; static struct zl10353_config anysee_zl10353_tda18212_config = …; static struct tda10023_config anysee_tda10023_tda18212_config = …; static const struct tda18212_config anysee_tda18212_config = …; static const struct tda18212_config anysee_tda18212_config2 = …; static struct cx24116_config anysee_cx24116_config = …; static struct stv0900_config anysee_stv0900_config = …; static struct stv6110_config anysee_stv6110_config = …; static struct isl6423_config anysee_isl6423_config = …; static struct cxd2820r_config anysee_cxd2820r_config = …; /* * New USB device strings: Mfr=1, Product=2, SerialNumber=0 * Manufacturer: AMT.CO.KR * * E30 VID=04b4 PID=861f HW=2 FW=2.1 Product=???????? * PCB: ? * parts: DNOS404ZH102A(MT352, DTT7579(?)) * * E30 VID=04b4 PID=861f HW=2 FW=2.1 "anysee-T(LP)" * PCB: PCB 507T (rev1.61) * parts: DNOS404ZH103A(ZL10353, DTT7579(?)) * OEA=0a OEB=00 OEC=00 OED=ff OEE=00 * IOA=45 IOB=ff IOC=00 IOD=ff IOE=00 * * E30 Plus VID=04b4 PID=861f HW=6 FW=1.0 "anysee" * PCB: 507CD (rev1.1) * parts: DNOS404ZH103A(ZL10353, DTT7579(?)), CST56I01 * OEA=80 OEB=00 OEC=00 OED=ff OEE=fe * IOA=4f IOB=ff IOC=00 IOD=06 IOE=01 * IOD[0] ZL10353 1=enabled * IOA[7] TS 0=enabled * tuner is not behind ZL10353 I2C-gate (no care if gate disabled or not) * * E30 C Plus VID=04b4 PID=861f HW=10 FW=1.0 "anysee-DC(LP)" * PCB: 507DC (rev0.2) * parts: TDA10023, DTOS403IH102B TM, CST56I01 * OEA=80 OEB=00 OEC=00 OED=ff OEE=fe * IOA=4f IOB=ff IOC=00 IOD=26 IOE=01 * IOD[0] TDA10023 1=enabled * * E30 S2 Plus VID=04b4 PID=861f HW=11 FW=0.1 "anysee-S2(LP)" * PCB: 507SI (rev2.1) * parts: BS2N10WCC01(CX24116, CX24118), ISL6423, TDA8024 * OEA=80 OEB=00 OEC=ff OED=ff OEE=fe * IOA=4d IOB=ff IOC=00 IOD=26 IOE=01 * IOD[0] CX24116 1=enabled * * E30 C Plus VID=1c73 PID=861f HW=15 FW=1.2 "anysee-FA(LP)" * PCB: 507FA (rev0.4) * parts: TDA10023, DTOS403IH102B TM, TDA8024 * OEA=80 OEB=00 OEC=ff OED=ff OEE=ff * IOA=4d IOB=ff IOC=00 IOD=00 IOE=c0 * IOD[5] TDA10023 1=enabled * IOE[0] tuner 1=enabled * * E30 Combo Plus VID=1c73 PID=861f HW=15 FW=1.2 "anysee-FA(LP)" * PCB: 507FA (rev1.1) * parts: ZL10353, TDA10023, DTOS403IH102B TM, TDA8024 * OEA=80 OEB=00 OEC=ff OED=ff OEE=ff * IOA=4d IOB=ff IOC=00 IOD=00 IOE=c0 * DVB-C: * IOD[5] TDA10023 1=enabled * IOE[0] tuner 1=enabled * DVB-T: * IOD[0] ZL10353 1=enabled * IOE[0] tuner 0=enabled * tuner is behind ZL10353 I2C-gate * tuner is behind TDA10023 I2C-gate * * E7 TC VID=1c73 PID=861f HW=18 FW=0.7 AMTCI=0.5 "anysee-E7TC(LP)" * PCB: 508TC (rev0.6) * parts: ZL10353, TDA10023, DNOD44CDH086A(TDA18212) * OEA=80 OEB=00 OEC=03 OED=f7 OEE=ff * IOA=4d IOB=00 IOC=cc IOD=48 IOE=e4 * IOA[7] TS 1=enabled * IOE[4] TDA18212 1=enabled * DVB-C: * IOD[6] ZL10353 0=disabled * IOD[5] TDA10023 1=enabled * IOE[0] IF 1=enabled * DVB-T: * IOD[5] TDA10023 0=disabled * IOD[6] ZL10353 1=enabled * IOE[0] IF 0=enabled * * E7 S2 VID=1c73 PID=861f HW=19 FW=0.4 AMTCI=0.5 "anysee-E7S2(LP)" * PCB: 508S2 (rev0.7) * parts: DNBU10512IST(STV0903, STV6110), ISL6423 * OEA=80 OEB=00 OEC=03 OED=f7 OEE=ff * IOA=4d IOB=00 IOC=c4 IOD=08 IOE=e4 * IOA[7] TS 1=enabled * IOE[5] STV0903 1=enabled * * E7 T2C VID=1c73 PID=861f HW=20 FW=0.1 AMTCI=0.5 "anysee-E7T2C(LP)" * PCB: 508T2C (rev0.3) * parts: DNOQ44QCH106A(CXD2820R, TDA18212), TDA8024 * OEA=80 OEB=00 OEC=03 OED=f7 OEE=ff * IOA=4d IOB=00 IOC=cc IOD=48 IOE=e4 * IOA[7] TS 1=enabled * IOE[5] CXD2820R 1=enabled * * E7 PTC VID=1c73 PID=861f HW=21 FW=0.1 AMTCI=?? "anysee-E7PTC(LP)" * PCB: 508PTC (rev0.5) * parts: ZL10353, TDA10023, DNOD44CDH086A(TDA18212) * OEA=80 OEB=00 OEC=03 OED=f7 OEE=ff * IOA=4d IOB=00 IOC=cc IOD=48 IOE=e4 * IOA[7] TS 1=enabled * IOE[4] TDA18212 1=enabled * DVB-C: * IOD[6] ZL10353 0=disabled * IOD[5] TDA10023 1=enabled * IOE[0] IF 1=enabled * DVB-T: * IOD[5] TDA10023 0=disabled * IOD[6] ZL10353 1=enabled * IOE[0] IF 0=enabled * * E7 PS2 VID=1c73 PID=861f HW=22 FW=0.1 AMTCI=?? "anysee-E7PS2(LP)" * PCB: 508PS2 (rev0.4) * parts: DNBU10512IST(STV0903, STV6110), ISL6423 * OEA=80 OEB=00 OEC=03 OED=f7 OEE=ff * IOA=4d IOB=00 IOC=c4 IOD=08 IOE=e4 * IOA[7] TS 1=enabled * IOE[5] STV0903 1=enabled */ static int anysee_read_config(struct dvb_usb_device *d) { … } /* external I2C gate used for DNOD44CDH086A(TDA18212) tuner module */ static int anysee_i2c_gate_ctrl(struct dvb_frontend *fe, int enable) { … } static int anysee_frontend_ctrl(struct dvb_frontend *fe, int onoff) { … } static int anysee_add_i2c_dev(struct dvb_usb_device *d, const char *type, u8 addr, void *platform_data) { … } static void anysee_del_i2c_dev(struct dvb_usb_device *d) { … } static int anysee_frontend_attach(struct dvb_usb_adapter *adap) { … } static int anysee_tuner_attach(struct dvb_usb_adapter *adap) { … } #if IS_ENABLED(CONFIG_RC_CORE) static int anysee_rc_query(struct dvb_usb_device *d) { … } static int anysee_get_rc_config(struct dvb_usb_device *d, struct dvb_usb_rc *rc) { … } #else #define anysee_get_rc_config … #endif static int anysee_ci_read_attribute_mem(struct dvb_ca_en50221 *ci, int slot, int addr) { … } static int anysee_ci_write_attribute_mem(struct dvb_ca_en50221 *ci, int slot, int addr, u8 val) { … } static int anysee_ci_read_cam_control(struct dvb_ca_en50221 *ci, int slot, u8 addr) { … } static int anysee_ci_write_cam_control(struct dvb_ca_en50221 *ci, int slot, u8 addr, u8 val) { … } static int anysee_ci_slot_reset(struct dvb_ca_en50221 *ci, int slot) { … } static int anysee_ci_slot_shutdown(struct dvb_ca_en50221 *ci, int slot) { … } static int anysee_ci_slot_ts_enable(struct dvb_ca_en50221 *ci, int slot) { … } static int anysee_ci_poll_slot_status(struct dvb_ca_en50221 *ci, int slot, int open) { … } static int anysee_ci_init(struct dvb_usb_device *d) { … } static void anysee_ci_release(struct dvb_usb_device *d) { … } static int anysee_init(struct dvb_usb_device *d) { … } static void anysee_exit(struct dvb_usb_device *d) { … } /* DVB USB Driver stuff */ static struct dvb_usb_device_properties anysee_props = …; static const struct usb_device_id anysee_id_table[] = …; MODULE_DEVICE_TABLE(usb, anysee_id_table); static struct usb_driver anysee_usb_driver = …; module_usb_driver(…) …; MODULE_AUTHOR(…) …; MODULE_DESCRIPTION(…) …; MODULE_LICENSE(…) …;
Codebase Browser
linux