/* SPDX-License-Identifier: GPL-2.0 */ /* * Copyright (C) 2018-2019 SiFive, Inc. * Wesley Terpstra * Paul Walmsley */ #ifndef __LINUX_CLK_ANALOGBITS_WRPLL_CLN28HPC_H #define __LINUX_CLK_ANALOGBITS_WRPLL_CLN28HPC_H #include <linux/types.h> /* DIVQ_VALUES: number of valid DIVQ values */ #define DIVQ_VALUES … /* * Bit definitions for struct wrpll_cfg.flags * * WRPLL_FLAGS_BYPASS_FLAG: if set, the PLL is either in bypass, or should be * programmed to enter bypass * WRPLL_FLAGS_RESET_FLAG: if set, the PLL is in reset * WRPLL_FLAGS_INT_FEEDBACK_FLAG: if set, the PLL is configured for internal * feedback mode * WRPLL_FLAGS_EXT_FEEDBACK_FLAG: if set, the PLL is configured for external * feedback mode (not yet supported by this driver) */ #define WRPLL_FLAGS_BYPASS_SHIFT … #define WRPLL_FLAGS_BYPASS_MASK … #define WRPLL_FLAGS_RESET_SHIFT … #define WRPLL_FLAGS_RESET_MASK … #define WRPLL_FLAGS_INT_FEEDBACK_SHIFT … #define WRPLL_FLAGS_INT_FEEDBACK_MASK … #define WRPLL_FLAGS_EXT_FEEDBACK_SHIFT … #define WRPLL_FLAGS_EXT_FEEDBACK_MASK … /** * struct wrpll_cfg - WRPLL configuration values * @divr: reference divider value (6 bits), as presented to the PLL signals * @divf: feedback divider value (9 bits), as presented to the PLL signals * @divq: output divider value (3 bits), as presented to the PLL signals * @flags: PLL configuration flags. See above for more information * @range: PLL loop filter range. See below for more information * @output_rate_cache: cached output rates, swept across DIVQ * @parent_rate: PLL refclk rate for which values are valid * @max_r: maximum possible R divider value, given @parent_rate * @init_r: initial R divider value to start the search from * * @divr, @divq, @divq, @range represent what the PLL expects to see * on its input signals. Thus @divr and @divf are the actual divisors * minus one. @divq is a power-of-two divider; for example, 1 = * divide-by-2 and 6 = divide-by-64. 0 is an invalid @divq value. * * When initially passing a struct wrpll_cfg record, the * record should be zero-initialized with the exception of the @flags * field. The only flag bits that need to be set are either * WRPLL_FLAGS_INT_FEEDBACK or WRPLL_FLAGS_EXT_FEEDBACK. */ struct wrpll_cfg { … }; int wrpll_configure_for_rate(struct wrpll_cfg *c, u32 target_rate, unsigned long parent_rate); unsigned int wrpll_calc_max_lock_us(const struct wrpll_cfg *c); unsigned long wrpll_calc_output_rate(const struct wrpll_cfg *c, unsigned long parent_rate); #endif /* __LINUX_CLK_ANALOGBITS_WRPLL_CLN28HPC_H */
Codebase Browser
linux