/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * Universal Flash Storage Host controller driver * Copyright (C) 2011-2013 Samsung India Software Operations * Copyright (c) 2013-2016, The Linux Foundation. All rights reserved. * * Authors: * Santosh Yaraganavi <[email protected]> * Vinayak Holikatti <[email protected]> */ #ifndef _UFSHCD_H #define _UFSHCD_H #include <linux/bitfield.h> #include <linux/blk-crypto-profile.h> #include <linux/blk-mq.h> #include <linux/devfreq.h> #include <linux/fault-inject.h> #include <linux/msi.h> #include <linux/pm_runtime.h> #include <linux/dma-direction.h> #include <scsi/scsi_device.h> #include <scsi/scsi_host.h> #include <ufs/unipro.h> #include <ufs/ufs.h> #include <ufs/ufs_quirks.h> #include <ufs/ufshci.h> #define UFSHCD … struct scsi_device; struct ufs_hba; enum dev_cmd_type { … }; enum ufs_event_type { … }; /** * struct uic_command - UIC command structure * @command: UIC command * @argument1: UIC command argument 1 * @argument2: UIC command argument 2 * @argument3: UIC command argument 3 * @cmd_active: Indicate if UIC command is outstanding * @done: UIC command completion */ struct uic_command { … }; /* Used to differentiate the power management options */ enum ufs_pm_op { … }; /* Host <-> Device UniPro Link state */ enum uic_link_state { … }; #define ufshcd_is_link_off(hba) … #define ufshcd_is_link_active(hba) … #define ufshcd_is_link_hibern8(hba) … #define ufshcd_is_link_broken(hba) … #define ufshcd_set_link_off(hba) … #define ufshcd_set_link_active(hba) … #define ufshcd_set_link_hibern8(hba) … #define ufshcd_set_link_broken(hba) … #define ufshcd_set_ufs_dev_active(h) … #define ufshcd_set_ufs_dev_sleep(h) … #define ufshcd_set_ufs_dev_poweroff(h) … #define ufshcd_set_ufs_dev_deepsleep(h) … #define ufshcd_is_ufs_dev_active(h) … #define ufshcd_is_ufs_dev_sleep(h) … #define ufshcd_is_ufs_dev_poweroff(h) … #define ufshcd_is_ufs_dev_deepsleep(h) … /* * UFS Power management levels. * Each level is in increasing order of power savings, except DeepSleep * which is lower than PowerDown with power on but not PowerDown with * power off. */ enum ufs_pm_level { … }; struct ufs_pm_lvl_states { … }; /** * struct ufshcd_lrb - local reference block * @utr_descriptor_ptr: UTRD address of the command * @ucd_req_ptr: UCD address of the command * @ucd_rsp_ptr: Response UPIU address for this command * @ucd_prdt_ptr: PRDT address of the command * @utrd_dma_addr: UTRD dma address for debug * @ucd_prdt_dma_addr: PRDT dma address for debug * @ucd_rsp_dma_addr: UPIU response dma address for debug * @ucd_req_dma_addr: UPIU request dma address for debug * @cmd: pointer to SCSI command * @scsi_status: SCSI status of the command * @command_type: SCSI, UFS, Query. * @task_tag: Task tag of the command * @lun: LUN of the command * @intr_cmd: Interrupt command (doesn't participate in interrupt aggregation) * @issue_time_stamp: time stamp for debug purposes (CLOCK_MONOTONIC) * @issue_time_stamp_local_clock: time stamp for debug purposes (local_clock) * @compl_time_stamp: time stamp for statistics (CLOCK_MONOTONIC) * @compl_time_stamp_local_clock: time stamp for debug purposes (local_clock) * @crypto_key_slot: the key slot to use for inline crypto (-1 if none) * @data_unit_num: the data unit number for the first block for inline crypto * @req_abort_skip: skip request abort task flag */ struct ufshcd_lrb { … }; /** * struct ufs_query_req - parameters for building a query request * @query_func: UPIU header query function * @upiu_req: the query request data */ struct ufs_query_req { … }; /** * struct ufs_query_resp - UPIU QUERY * @response: device response code * @upiu_res: query response data */ struct ufs_query_res { … }; /** * struct ufs_query - holds relevant data structures for query request * @request: request upiu and function * @descriptor: buffer for sending/receiving descriptor * @response: response upiu and response */ struct ufs_query { … }; /** * struct ufs_dev_cmd - all assosiated fields with device management commands * @type: device management command type - Query, NOP OUT * @lock: lock to allow one command at a time * @complete: internal commands completion * @query: Device management query information */ struct ufs_dev_cmd { … }; /** * struct ufs_clk_info - UFS clock related info * @list: list headed by hba->clk_list_head * @clk: clock node * @name: clock name * @max_freq: maximum frequency supported by the clock * @min_freq: min frequency that can be used for clock scaling * @curr_freq: indicates the current frequency that it is set to * @keep_link_active: indicates that the clk should not be disabled if * link is active * @enabled: variable to check against multiple enable/disable */ struct ufs_clk_info { … }; enum ufs_notify_change_status { … }; struct ufs_pa_layer_attr { … }; struct ufs_pwr_mode_info { … }; /** * struct ufs_hba_variant_ops - variant specific callbacks * @name: variant name * @max_num_rtt: maximum RTT supported by the host * @init: called when the driver is initialized * @exit: called to cleanup everything done in init * @get_ufs_hci_version: called to get UFS HCI version * @clk_scale_notify: notifies that clks are scaled up/down * @setup_clocks: called before touching any of the controller registers * @hce_enable_notify: called before and after HCE enable bit is set to allow * variant specific Uni-Pro initialization. * @link_startup_notify: called before and after Link startup is carried out * to allow variant specific Uni-Pro initialization. * @pwr_change_notify: called before and after a power mode change * is carried out to allow vendor spesific capabilities * to be set. * @setup_xfer_req: called before any transfer request is issued * to set some things * @setup_task_mgmt: called before any task management request is issued * to set some things * @hibern8_notify: called around hibern8 enter/exit * @apply_dev_quirks: called to apply device specific quirks * @fixup_dev_quirks: called to modify device specific quirks * @suspend: called during host controller PM callback * @resume: called during host controller PM callback * @dbg_register_dump: used to dump controller debug information * @phy_initialization: used to initialize phys * @device_reset: called to issue a reset pulse on the UFS device * @config_scaling_param: called to configure clock scaling parameters * @program_key: program or evict an inline encryption key * @fill_crypto_prdt: initialize crypto-related fields in the PRDT * @event_notify: called to notify important events * @reinit_notify: called to notify reinit of UFSHCD during max gear switch * @mcq_config_resource: called to configure MCQ platform resources * @get_hba_mac: reports maximum number of outstanding commands supported by * the controller. Should be implemented for UFSHCI 4.0 or later * controllers that are not compliant with the UFSHCI 4.0 specification. * @op_runtime_config: called to config Operation and runtime regs Pointers * @get_outstanding_cqs: called to get outstanding completion queues * @config_esi: called to config Event Specific Interrupt * @config_scsi_dev: called to configure SCSI device parameters */ struct ufs_hba_variant_ops { … }; /* clock gating state */ enum clk_gating_state { … }; /** * struct ufs_clk_gating - UFS clock gating related info * @gate_work: worker to turn off clocks after some delay as specified in * delay_ms * @ungate_work: worker to turn on clocks that will be used in case of * interrupt context * @state: the current clocks state * @delay_ms: gating delay in ms * @is_suspended: clk gating is suspended when set to 1 which can be used * during suspend/resume * @delay_attr: sysfs attribute to control delay_attr * @enable_attr: sysfs attribute to enable/disable clock gating * @is_enabled: Indicates the current status of clock gating * @is_initialized: Indicates whether clock gating is initialized or not * @active_reqs: number of requests that are pending and should be waited for * completion before gating clocks. * @clk_gating_workq: workqueue for clock gating work. */ struct ufs_clk_gating { … }; /** * struct ufs_clk_scaling - UFS clock scaling related data * @active_reqs: number of requests that are pending. If this is zero when * devfreq ->target() function is called then schedule "suspend_work" to * suspend devfreq. * @tot_busy_t: Total busy time in current polling window * @window_start_t: Start time (in jiffies) of the current polling window * @busy_start_t: Start time of current busy period * @enable_attr: sysfs attribute to enable/disable clock scaling * @saved_pwr_info: UFS power mode may also be changed during scaling and this * one keeps track of previous power mode. * @workq: workqueue to schedule devfreq suspend/resume work * @suspend_work: worker to suspend devfreq * @resume_work: worker to resume devfreq * @target_freq: frequency requested by devfreq framework * @min_gear: lowest HS gear to scale down to * @is_enabled: tracks if scaling is currently enabled or not, controlled by * clkscale_enable sysfs node * @is_allowed: tracks if scaling is currently allowed or not, used to block * clock scaling which is not invoked from devfreq governor * @is_initialized: Indicates whether clock scaling is initialized or not * @is_busy_started: tracks if busy period has started or not * @is_suspended: tracks if devfreq is suspended or not */ struct ufs_clk_scaling { … }; #define UFS_EVENT_HIST_LENGTH … /** * struct ufs_event_hist - keeps history of errors * @pos: index to indicate cyclic buffer position * @val: cyclic buffer for registers value * @tstamp: cyclic buffer for time stamp * @cnt: error counter */ struct ufs_event_hist { … }; /** * struct ufs_stats - keeps usage/err statistics * @last_intr_status: record the last interrupt status. * @last_intr_ts: record the last interrupt timestamp. * @hibern8_exit_cnt: Counter to keep track of number of exits, * reset this after link-startup. * @last_hibern8_exit_tstamp: Set time after the hibern8 exit. * Clear after the first successful command completion. * @event: array with event history. */ struct ufs_stats { … }; /** * enum ufshcd_state - UFS host controller state * @UFSHCD_STATE_RESET: Link is not operational. Postpone SCSI command * processing. * @UFSHCD_STATE_OPERATIONAL: The host controller is operational and can process * SCSI commands. * @UFSHCD_STATE_EH_SCHEDULED_NON_FATAL: The error handler has been scheduled. * SCSI commands may be submitted to the controller. * @UFSHCD_STATE_EH_SCHEDULED_FATAL: The error handler has been scheduled. Fail * newly submitted SCSI commands with error code DID_BAD_TARGET. * @UFSHCD_STATE_ERROR: An unrecoverable error occurred, e.g. link recovery * failed. Fail all SCSI commands with error code DID_ERROR. */ enum ufshcd_state { … }; enum ufshcd_quirks { … }; enum ufshcd_caps { … }; struct ufs_hba_variant_params { … }; struct ufs_hba_monitor { … }; /** * struct ufshcd_res_info_t - MCQ related resource regions * * @name: resource name * @resource: pointer to resource region * @base: register base address */ struct ufshcd_res_info { … }; enum ufshcd_res { … }; /** * struct ufshcd_mcq_opr_info_t - Operation and Runtime registers * * @offset: Doorbell Address Offset * @stride: Steps proportional to queue [0...31] * @base: base address */ struct ufshcd_mcq_opr_info_t { … }; enum ufshcd_mcq_opr { … }; /** * struct ufs_hba - per adapter private structure * @mmio_base: UFSHCI base register address * @ucdl_base_addr: UFS Command Descriptor base address * @utrdl_base_addr: UTP Transfer Request Descriptor base address * @utmrdl_base_addr: UTP Task Management Descriptor base address * @ucdl_dma_addr: UFS Command Descriptor DMA address * @utrdl_dma_addr: UTRDL DMA address * @utmrdl_dma_addr: UTMRDL DMA address * @host: Scsi_Host instance of the driver * @dev: device handle * @ufs_device_wlun: WLUN that controls the entire UFS device. * @hwmon_device: device instance registered with the hwmon core. * @curr_dev_pwr_mode: active UFS device power mode. * @uic_link_state: active state of the link to the UFS device. * @rpm_lvl: desired UFS power management level during runtime PM. * @spm_lvl: desired UFS power management level during system PM. * @pm_op_in_progress: whether or not a PM operation is in progress. * @ahit: value of Auto-Hibernate Idle Timer register. * @lrb: local reference block * @outstanding_tasks: Bits representing outstanding task requests * @outstanding_lock: Protects @outstanding_reqs. * @outstanding_reqs: Bits representing outstanding transfer requests * @capabilities: UFS Controller Capabilities * @mcq_capabilities: UFS Multi Circular Queue capabilities * @nutrs: Transfer Request Queue depth supported by controller * @nortt - Max outstanding RTTs supported by controller * @nutmrs: Task Management Queue depth supported by controller * @reserved_slot: Used to submit device commands. Protected by @dev_cmd.lock. * @ufs_version: UFS Version to which controller complies * @vops: pointer to variant specific operations * @vps: pointer to variant specific parameters * @priv: pointer to variant specific private data * @sg_entry_size: size of struct ufshcd_sg_entry (may include variant fields) * @irq: Irq number of the controller * @is_irq_enabled: whether or not the UFS controller interrupt is enabled. * @dev_ref_clk_freq: reference clock frequency * @quirks: bitmask with information about deviations from the UFSHCI standard. * @dev_quirks: bitmask with information about deviations from the UFS standard. * @tmf_tag_set: TMF tag set. * @tmf_queue: Used to allocate TMF tags. * @tmf_rqs: array with pointers to TMF requests while these are in progress. * @active_uic_cmd: handle of active UIC command * @uic_cmd_mutex: mutex for UIC command * @uic_async_done: completion used during UIC processing * @ufshcd_state: UFSHCD state * @eh_flags: Error handling flags * @intr_mask: Interrupt Mask Bits * @ee_ctrl_mask: Exception event control mask * @ee_drv_mask: Exception event mask for driver * @ee_usr_mask: Exception event mask for user (set via debugfs) * @ee_ctrl_mutex: Used to serialize exception event information. * @is_powered: flag to check if HBA is powered * @shutting_down: flag to check if shutdown has been invoked * @host_sem: semaphore used to serialize concurrent contexts * @eh_wq: Workqueue that eh_work works on * @eh_work: Worker to handle UFS errors that require s/w attention * @eeh_work: Worker to handle exception events * @errors: HBA errors * @uic_error: UFS interconnect layer error status * @saved_err: sticky error mask * @saved_uic_err: sticky UIC error mask * @ufs_stats: various error counters * @force_reset: flag to force eh_work perform a full reset * @force_pmc: flag to force a power mode change * @silence_err_logs: flag to silence error logs * @dev_cmd: ufs device management command information * @last_dme_cmd_tstamp: time stamp of the last completed DME command * @nop_out_timeout: NOP OUT timeout value * @dev_info: information about the UFS device * @auto_bkops_enabled: to track whether bkops is enabled in device * @vreg_info: UFS device voltage regulator information * @clk_list_head: UFS host controller clocks list node head * @use_pm_opp: Indicates whether OPP based scaling is used or not * @req_abort_count: number of times ufshcd_abort() has been called * @lanes_per_direction: number of lanes per data direction between the UFS * controller and the UFS device. * @pwr_info: holds current power mode * @max_pwr_info: keeps the device max valid pwm * @clk_gating: information related to clock gating * @caps: bitmask with information about UFS controller capabilities * @devfreq: frequency scaling information owned by the devfreq core * @clk_scaling: frequency scaling information owned by the UFS driver * @system_suspending: system suspend has been started and system resume has * not yet finished. * @is_sys_suspended: UFS device has been suspended because of system suspend * @urgent_bkops_lvl: keeps track of urgent bkops level for device * @is_urgent_bkops_lvl_checked: keeps track if the urgent bkops level for * device is known or not. * @wb_mutex: used to serialize devfreq and sysfs write booster toggling * @clk_scaling_lock: used to serialize device commands and clock scaling * @desc_size: descriptor sizes reported by device * @scsi_block_reqs_cnt: reference counting for scsi block requests * @bsg_dev: struct device associated with the BSG queue * @bsg_queue: BSG queue associated with the UFS controller * @rpm_dev_flush_recheck_work: used to suspend from RPM (runtime power * management) after the UFS device has finished a WriteBooster buffer * flush or auto BKOP. * @monitor: statistics about UFS commands * @crypto_capabilities: Content of crypto capabilities register (0x100) * @crypto_cap_array: Array of crypto capabilities * @crypto_cfg_register: Start of the crypto cfg array * @crypto_profile: the crypto profile of this hba (if applicable) * @debugfs_root: UFS controller debugfs root directory * @debugfs_ee_work: used to restore ee_ctrl_mask after a delay * @debugfs_ee_rate_limit_ms: user configurable delay after which to restore * ee_ctrl_mask * @luns_avail: number of regular and well known LUNs supported by the UFS * device * @nr_hw_queues: number of hardware queues configured * @nr_queues: number of Queues of different queue types * @complete_put: whether or not to call ufshcd_rpm_put() from inside * ufshcd_resume_complete() * @ext_iid_sup: is EXT_IID is supported by UFSHC * @mcq_sup: is mcq supported by UFSHC * @mcq_enabled: is mcq ready to accept requests * @res: array of resource info of MCQ registers * @mcq_base: Multi circular queue registers base address * @uhq: array of supported hardware queues * @dev_cmd_queue: Queue for issuing device management commands * @mcq_opr: MCQ operation and runtime registers * @ufs_rtc_update_work: A work for UFS RTC periodic update * @pm_qos_req: PM QoS request handle * @pm_qos_enabled: flag to check if pm qos is enabled */ struct ufs_hba { … }; /** * struct ufs_hw_queue - per hardware queue structure * @mcq_sq_head: base address of submission queue head pointer * @mcq_sq_tail: base address of submission queue tail pointer * @mcq_cq_head: base address of completion queue head pointer * @mcq_cq_tail: base address of completion queue tail pointer * @sqe_base_addr: submission queue entry base address * @sqe_dma_addr: submission queue dma address * @cqe_base_addr: completion queue base address * @cqe_dma_addr: completion queue dma address * @max_entries: max number of slots in this hardware queue * @id: hardware queue ID * @sq_tp_slot: current slot to which SQ tail pointer is pointing * @sq_lock: serialize submission queue access * @cq_tail_slot: current slot to which CQ tail pointer is pointing * @cq_head_slot: current slot to which CQ head pointer is pointing * @cq_lock: Synchronize between multiple polling instances * @sq_mutex: prevent submission queue concurrent access */ struct ufs_hw_queue { … }; #define MCQ_QCFG_SIZE … static inline unsigned int ufshcd_mcq_opr_offset(struct ufs_hba *hba, enum ufshcd_mcq_opr opr, int idx) { … } static inline unsigned int ufshcd_mcq_cfg_offset(unsigned int reg, int idx) { … } #ifdef CONFIG_SCSI_UFS_VARIABLE_SG_ENTRY_SIZE static inline size_t ufshcd_sg_entry_size(const struct ufs_hba *hba) { … } static inline void ufshcd_set_sg_entry_size(struct ufs_hba *hba, size_t sg_entry_size) { … } #else static inline size_t ufshcd_sg_entry_size(const struct ufs_hba *hba) { return sizeof(struct ufshcd_sg_entry); } #define ufshcd_set_sg_entry_size … #endif static inline size_t ufshcd_get_ucd_size(const struct ufs_hba *hba) { … } /* Returns true if clocks can be gated. Otherwise false */ static inline bool ufshcd_is_clkgating_allowed(struct ufs_hba *hba) { … } static inline bool ufshcd_can_hibern8_during_gating(struct ufs_hba *hba) { … } static inline int ufshcd_is_clkscaling_supported(struct ufs_hba *hba) { … } static inline bool ufshcd_can_autobkops_during_suspend(struct ufs_hba *hba) { … } static inline bool ufshcd_is_rpm_autosuspend_allowed(struct ufs_hba *hba) { … } static inline bool ufshcd_is_intr_aggr_allowed(struct ufs_hba *hba) { … } static inline bool ufshcd_can_aggressive_pc(struct ufs_hba *hba) { … } static inline bool ufshcd_is_auto_hibern8_supported(struct ufs_hba *hba) { … } static inline bool ufshcd_is_auto_hibern8_enabled(struct ufs_hba *hba) { … } static inline bool ufshcd_is_wb_allowed(struct ufs_hba *hba) { … } static inline bool ufshcd_enable_wb_if_scaling_up(struct ufs_hba *hba) { … } #define ufsmcq_writel(hba, val, reg) … #define ufsmcq_readl(hba, reg) … #define ufsmcq_writelx(hba, val, reg) … #define ufsmcq_readlx(hba, reg) … #define ufshcd_writel(hba, val, reg) … #define ufshcd_readl(hba, reg) … /** * ufshcd_rmwl - perform read/modify/write for a controller register * @hba: per adapter instance * @mask: mask to apply on read value * @val: actual value to write * @reg: register address */ static inline void ufshcd_rmwl(struct ufs_hba *hba, u32 mask, u32 val, u32 reg) { … } void ufshcd_enable_irq(struct ufs_hba *hba); void ufshcd_disable_irq(struct ufs_hba *hba); int ufshcd_alloc_host(struct device *, struct ufs_hba **); void ufshcd_dealloc_host(struct ufs_hba *); int ufshcd_hba_enable(struct ufs_hba *hba); int ufshcd_init(struct ufs_hba *, void __iomem *, unsigned int); int ufshcd_link_recovery(struct ufs_hba *hba); int ufshcd_make_hba_operational(struct ufs_hba *hba); void ufshcd_remove(struct ufs_hba *); int ufshcd_uic_hibern8_enter(struct ufs_hba *hba); int ufshcd_uic_hibern8_exit(struct ufs_hba *hba); void ufshcd_delay_us(unsigned long us, unsigned long tolerance); void ufshcd_parse_dev_ref_clk_freq(struct ufs_hba *hba, struct clk *refclk); void ufshcd_update_evt_hist(struct ufs_hba *hba, u32 id, u32 val); void ufshcd_hba_stop(struct ufs_hba *hba); void ufshcd_schedule_eh_work(struct ufs_hba *hba); void ufshcd_mcq_config_mac(struct ufs_hba *hba, u32 max_active_cmds); unsigned int ufshcd_mcq_queue_cfg_addr(struct ufs_hba *hba); u32 ufshcd_mcq_read_cqis(struct ufs_hba *hba, int i); void ufshcd_mcq_write_cqis(struct ufs_hba *hba, u32 val, int i); unsigned long ufshcd_mcq_poll_cqe_lock(struct ufs_hba *hba, struct ufs_hw_queue *hwq); void ufshcd_mcq_make_queues_operational(struct ufs_hba *hba); void ufshcd_mcq_enable_esi(struct ufs_hba *hba); void ufshcd_mcq_enable(struct ufs_hba *hba); void ufshcd_mcq_config_esi(struct ufs_hba *hba, struct msi_msg *msg); int ufshcd_opp_config_clks(struct device *dev, struct opp_table *opp_table, struct dev_pm_opp *opp, void *data, bool scaling_down); /** * ufshcd_set_variant - set variant specific data to the hba * @hba: per adapter instance * @variant: pointer to variant specific data */ static inline void ufshcd_set_variant(struct ufs_hba *hba, void *variant) { … } /** * ufshcd_get_variant - get variant specific data from the hba * @hba: per adapter instance */ static inline void *ufshcd_get_variant(struct ufs_hba *hba) { … } #ifdef CONFIG_PM extern int ufshcd_runtime_suspend(struct device *dev); extern int ufshcd_runtime_resume(struct device *dev); #endif #ifdef CONFIG_PM_SLEEP extern int ufshcd_system_suspend(struct device *dev); extern int ufshcd_system_resume(struct device *dev); extern int ufshcd_system_freeze(struct device *dev); extern int ufshcd_system_thaw(struct device *dev); extern int ufshcd_system_restore(struct device *dev); #endif extern int ufshcd_dme_configure_adapt(struct ufs_hba *hba, int agreed_gear, int adapt_val); extern int ufshcd_dme_set_attr(struct ufs_hba *hba, u32 attr_sel, u8 attr_set, u32 mib_val, u8 peer); extern int ufshcd_dme_get_attr(struct ufs_hba *hba, u32 attr_sel, u32 *mib_val, u8 peer); extern int ufshcd_config_pwr_mode(struct ufs_hba *hba, struct ufs_pa_layer_attr *desired_pwr_mode); extern int ufshcd_uic_change_pwr_mode(struct ufs_hba *hba, u8 mode); /* UIC command interfaces for DME primitives */ #define DME_LOCAL … #define DME_PEER … #define ATTR_SET_NOR … #define ATTR_SET_ST … static inline int ufshcd_dme_set(struct ufs_hba *hba, u32 attr_sel, u32 mib_val) { … } static inline int ufshcd_dme_st_set(struct ufs_hba *hba, u32 attr_sel, u32 mib_val) { … } static inline int ufshcd_dme_peer_set(struct ufs_hba *hba, u32 attr_sel, u32 mib_val) { … } static inline int ufshcd_dme_peer_st_set(struct ufs_hba *hba, u32 attr_sel, u32 mib_val) { … } static inline int ufshcd_dme_get(struct ufs_hba *hba, u32 attr_sel, u32 *mib_val) { … } static inline int ufshcd_dme_peer_get(struct ufs_hba *hba, u32 attr_sel, u32 *mib_val) { … } static inline bool ufshcd_is_hs_mode(struct ufs_pa_layer_attr *pwr_info) { … } static inline int ufshcd_disable_host_tx_lcc(struct ufs_hba *hba) { … } void ufshcd_auto_hibern8_update(struct ufs_hba *hba, u32 ahit); void ufshcd_fixup_dev_quirks(struct ufs_hba *hba, const struct ufs_dev_quirk *fixups); #define SD_ASCII_STD … #define SD_RAW … int ufshcd_read_string_desc(struct ufs_hba *hba, u8 desc_index, u8 **buf, bool ascii); void ufshcd_hold(struct ufs_hba *hba); void ufshcd_release(struct ufs_hba *hba); void ufshcd_clkgate_delay_set(struct device *dev, unsigned long value); int ufshcd_get_vreg(struct device *dev, struct ufs_vreg *vreg); int ufshcd_send_uic_cmd(struct ufs_hba *hba, struct uic_command *uic_cmd); int ufshcd_advanced_rpmb_req_handler(struct ufs_hba *hba, struct utp_upiu_req *req_upiu, struct utp_upiu_req *rsp_upiu, struct ufs_ehs *ehs_req, struct ufs_ehs *ehs_rsp, int sg_cnt, struct scatterlist *sg_list, enum dma_data_direction dir); int ufshcd_wb_toggle(struct ufs_hba *hba, bool enable); int ufshcd_wb_toggle_buf_flush(struct ufs_hba *hba, bool enable); int ufshcd_suspend_prepare(struct device *dev); int __ufshcd_suspend_prepare(struct device *dev, bool rpm_ok_for_spm); void ufshcd_resume_complete(struct device *dev); bool ufshcd_is_hba_active(struct ufs_hba *hba); void ufshcd_pm_qos_init(struct ufs_hba *hba); void ufshcd_pm_qos_exit(struct ufs_hba *hba); /* Wrapper functions for safely calling variant operations */ static inline int ufshcd_vops_init(struct ufs_hba *hba) { … } static inline int ufshcd_vops_phy_initialization(struct ufs_hba *hba) { … } extern const struct ufs_pm_lvl_states ufs_pm_lvl_states[]; int ufshcd_dump_regs(struct ufs_hba *hba, size_t offset, size_t len, const char *prefix); int __ufshcd_write_ee_control(struct ufs_hba *hba, u32 ee_ctrl_mask); int ufshcd_write_ee_control(struct ufs_hba *hba); int ufshcd_update_ee_control(struct ufs_hba *hba, u16 *mask, const u16 *other_mask, u16 set, u16 clr); #endif /* End of Header */
Codebase Browser
linux