// SPDX-License-Identifier: GPL-2.0 /* Copyright (C) B.A.T.M.A.N. contributors: * * Marek Lindner, Simon Wunderlich */ #include "main.h" #include <linux/array_size.h> #include <linux/atomic.h> #include <linux/build_bug.h> #include <linux/byteorder/generic.h> #include <linux/container_of.h> #include <linux/crc32c.h> #include <linux/device.h> #include <linux/errno.h> #include <linux/gfp.h> #include <linux/if_ether.h> #include <linux/if_vlan.h> #include <linux/init.h> #include <linux/ip.h> #include <linux/ipv6.h> #include <linux/kobject.h> #include <linux/kref.h> #include <linux/list.h> #include <linux/minmax.h> #include <linux/module.h> #include <linux/netdevice.h> #include <linux/printk.h> #include <linux/rculist.h> #include <linux/rcupdate.h> #include <linux/skbuff.h> #include <linux/slab.h> #include <linux/spinlock.h> #include <linux/sprintf.h> #include <linux/stddef.h> #include <linux/string.h> #include <linux/workqueue.h> #include <net/dsfield.h> #include <net/genetlink.h> #include <net/rtnetlink.h> #include <uapi/linux/batadv_packet.h> #include <uapi/linux/batman_adv.h> #include "bat_algo.h" #include "bat_iv_ogm.h" #include "bat_v.h" #include "bridge_loop_avoidance.h" #include "distributed-arp-table.h" #include "gateway_client.h" #include "gateway_common.h" #include "hard-interface.h" #include "log.h" #include "multicast.h" #include "netlink.h" #include "network-coding.h" #include "originator.h" #include "routing.h" #include "send.h" #include "soft-interface.h" #include "tp_meter.h" #include "translation-table.h" /* List manipulations on hardif_list have to be rtnl_lock()'ed, * list traversals just rcu-locked */ struct list_head batadv_hardif_list; unsigned int batadv_hardif_generation; static int (*batadv_rx_handler[256])(struct sk_buff *skb, struct batadv_hard_iface *recv_if); unsigned char batadv_broadcast_addr[] = …; struct workqueue_struct *batadv_event_workqueue; static void batadv_recv_handler_init(void); #define BATADV_UEV_TYPE_VAR … #define BATADV_UEV_ACTION_VAR … #define BATADV_UEV_DATA_VAR … static char *batadv_uev_action_str[] = …; static char *batadv_uev_type_str[] = …; static int __init batadv_init(void) { … } static void __exit batadv_exit(void) { … } /** * batadv_mesh_init() - Initialize soft interface * @soft_iface: netdev struct of the soft interface * * Return: 0 on success or negative error number in case of failure */ int batadv_mesh_init(struct net_device *soft_iface) { … } /** * batadv_mesh_free() - Deinitialize soft interface * @soft_iface: netdev struct of the soft interface */ void batadv_mesh_free(struct net_device *soft_iface) { … } /** * batadv_is_my_mac() - check if the given mac address belongs to any of the * real interfaces in the current mesh * @bat_priv: the bat priv with all the soft interface information * @addr: the address to check * * Return: 'true' if the mac address was found, false otherwise. */ bool batadv_is_my_mac(struct batadv_priv *bat_priv, const u8 *addr) { … } /** * batadv_max_header_len() - calculate maximum encapsulation overhead for a * payload packet * * Return: the maximum encapsulation overhead in bytes. */ int batadv_max_header_len(void) { … } /** * batadv_skb_set_priority() - sets skb priority according to packet content * @skb: the packet to be sent * @offset: offset to the packet content * * This function sets a value between 256 and 263 (802.1d priority), which * can be interpreted by the cfg80211 or other drivers. */ void batadv_skb_set_priority(struct sk_buff *skb, int offset) { … } static int batadv_recv_unhandled_packet(struct sk_buff *skb, struct batadv_hard_iface *recv_if) { … } /* incoming packets with the batman ethertype received on any active hard * interface */ /** * batadv_batman_skb_recv() - Handle incoming message from an hard interface * @skb: the received packet * @dev: the net device that the packet was received on * @ptype: packet type of incoming packet (ETH_P_BATMAN) * @orig_dev: the original receive net device (e.g. bonded device) * * Return: NET_RX_SUCCESS on success or NET_RX_DROP in case of failure */ int batadv_batman_skb_recv(struct sk_buff *skb, struct net_device *dev, struct packet_type *ptype, struct net_device *orig_dev) { … } static void batadv_recv_handler_init(void) { … } /** * batadv_recv_handler_register() - Register handler for batman-adv packet type * @packet_type: batadv_packettype which should be handled * @recv_handler: receive handler for the packet type * * Return: 0 on success or negative error number in case of failure */ int batadv_recv_handler_register(u8 packet_type, int (*recv_handler)(struct sk_buff *, struct batadv_hard_iface *)) { … } /** * batadv_recv_handler_unregister() - Unregister handler for packet type * @packet_type: batadv_packettype which should no longer be handled */ void batadv_recv_handler_unregister(u8 packet_type) { … } /** * batadv_skb_crc32() - calculate CRC32 of the whole packet and skip bytes in * the header * @skb: skb pointing to fragmented socket buffers * @payload_ptr: Pointer to position inside the head buffer of the skb * marking the start of the data to be CRC'ed * * payload_ptr must always point to an address in the skb head buffer and not to * a fragment. * * Return: big endian crc32c of the checksummed data */ __be32 batadv_skb_crc32(struct sk_buff *skb, u8 *payload_ptr) { … } /** * batadv_get_vid() - extract the VLAN identifier from skb if any * @skb: the buffer containing the packet * @header_len: length of the batman header preceding the ethernet header * * Return: VID with the BATADV_VLAN_HAS_TAG flag when the packet embedded in the * skb is vlan tagged. Otherwise BATADV_NO_FLAGS. */ unsigned short batadv_get_vid(struct sk_buff *skb, size_t header_len) { … } /** * batadv_vlan_ap_isola_get() - return AP isolation status for the given vlan * @bat_priv: the bat priv with all the soft interface information * @vid: the VLAN identifier for which the AP isolation attributed as to be * looked up * * Return: true if AP isolation is on for the VLAN identified by vid, false * otherwise */ bool batadv_vlan_ap_isola_get(struct batadv_priv *bat_priv, unsigned short vid) { … } /** * batadv_throw_uevent() - Send an uevent with batman-adv specific env data * @bat_priv: the bat priv with all the soft interface information * @type: subsystem type of event. Stored in uevent's BATTYPE * @action: action type of event. Stored in uevent's BATACTION * @data: string with additional information to the event (ignored for * BATADV_UEV_DEL). Stored in uevent's BATDATA * * Return: 0 on success or negative error number in case of failure */ int batadv_throw_uevent(struct batadv_priv *bat_priv, enum batadv_uev_type type, enum batadv_uev_action action, const char *data) { … } module_init(…) …; module_exit(batadv_exit); MODULE_LICENSE(…) …; MODULE_AUTHOR(…); MODULE_DESCRIPTION(…); MODULE_VERSION(…); MODULE_ALIAS_RTNL_LINK(…) …; MODULE_ALIAS_GENL_FAMILY(…);
Codebase Browser
linux