/* * This provides the callbacks and functions that KGDB needs to share between * the core, I/O and arch-specific portions. * * Author: Amit Kale <[email protected]> and * Tom Rini <[email protected]> * * 2001-2004 (c) Amit S. Kale and 2003-2005 (c) MontaVista Software, Inc. * This file is licensed under the terms of the GNU General Public License * version 2. This program is licensed "as is" without any warranty of any * kind, whether express or implied. */ #ifndef _KGDB_H_ #define _KGDB_H_ #include <linux/linkage.h> #include <linux/init.h> #include <linux/atomic.h> #include <linux/kprobes.h> #ifdef CONFIG_HAVE_ARCH_KGDB #include <asm/kgdb.h> #endif #ifdef CONFIG_KGDB struct pt_regs; /** * kgdb_skipexception - (optional) exit kgdb_handle_exception early * @exception: Exception vector number * @regs: Current &struct pt_regs. * * On some architectures it is required to skip a breakpoint * exception when it occurs after a breakpoint has been removed. * This can be implemented in the architecture specific portion of kgdb. */ extern int kgdb_skipexception(int exception, struct pt_regs *regs); struct tasklet_struct; struct task_struct; struct uart_port; /** * kgdb_breakpoint - compiled in breakpoint * * This will be implemented as a static inline per architecture. This * function is called by the kgdb core to execute an architecture * specific trap to cause kgdb to enter the exception processing. * */ void kgdb_breakpoint(void); extern int kgdb_connected; extern int kgdb_io_module_registered; extern atomic_t kgdb_setting_breakpoint; extern atomic_t kgdb_cpu_doing_single_step; extern struct task_struct *kgdb_usethread; extern struct task_struct *kgdb_contthread; enum kgdb_bptype { … }; enum kgdb_bpstate { … }; struct kgdb_bkpt { … }; struct dbg_reg_def_t { … }; #ifndef DBG_MAX_REG_NUM #define DBG_MAX_REG_NUM … #else extern struct dbg_reg_def_t dbg_reg_def[]; extern char *dbg_get_reg(int regno, void *mem, struct pt_regs *regs); extern int dbg_set_reg(int regno, void *mem, struct pt_regs *regs); #endif #ifndef KGDB_MAX_BREAKPOINTS #define KGDB_MAX_BREAKPOINTS … #endif #define KGDB_HW_BREAKPOINT … /* * Functions each KGDB-supporting architecture must provide: */ /** * kgdb_arch_init - Perform any architecture specific initialization. * * This function will handle the initialization of any architecture * specific callbacks. */ extern int kgdb_arch_init(void); /** * kgdb_arch_exit - Perform any architecture specific uninitalization. * * This function will handle the uninitalization of any architecture * specific callbacks, for dynamic registration and unregistration. */ extern void kgdb_arch_exit(void); /** * pt_regs_to_gdb_regs - Convert ptrace regs to GDB regs * @gdb_regs: A pointer to hold the registers in the order GDB wants. * @regs: The &struct pt_regs of the current process. * * Convert the pt_regs in @regs into the format for registers that * GDB expects, stored in @gdb_regs. */ extern void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs); /** * sleeping_thread_to_gdb_regs - Convert ptrace regs to GDB regs * @gdb_regs: A pointer to hold the registers in the order GDB wants. * @p: The &struct task_struct of the desired process. * * Convert the register values of the sleeping process in @p to * the format that GDB expects. * This function is called when kgdb does not have access to the * &struct pt_regs and therefore it should fill the gdb registers * @gdb_regs with what has been saved in &struct thread_struct * thread field during switch_to. */ extern void sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *p); /** * gdb_regs_to_pt_regs - Convert GDB regs to ptrace regs. * @gdb_regs: A pointer to hold the registers we've received from GDB. * @regs: A pointer to a &struct pt_regs to hold these values in. * * Convert the GDB regs in @gdb_regs into the pt_regs, and store them * in @regs. */ extern void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *regs); /** * kgdb_arch_handle_exception - Handle architecture specific GDB packets. * @vector: The error vector of the exception that happened. * @signo: The signal number of the exception that happened. * @err_code: The error code of the exception that happened. * @remcom_in_buffer: The buffer of the packet we have read. * @remcom_out_buffer: The buffer of %BUFMAX bytes to write a packet into. * @regs: The &struct pt_regs of the current process. * * This function MUST handle the 'c' and 's' command packets, * as well packets to set / remove a hardware breakpoint, if used. * If there are additional packets which the hardware needs to handle, * they are handled here. The code should return -1 if it wants to * process more packets, and a %0 or %1 if it wants to exit from the * kgdb callback. */ extern int kgdb_arch_handle_exception(int vector, int signo, int err_code, char *remcom_in_buffer, char *remcom_out_buffer, struct pt_regs *regs); /** * kgdb_arch_handle_qxfer_pkt - Handle architecture specific GDB XML * packets. * @remcom_in_buffer: The buffer of the packet we have read. * @remcom_out_buffer: The buffer of %BUFMAX bytes to write a packet into. */ extern void kgdb_arch_handle_qxfer_pkt(char *remcom_in_buffer, char *remcom_out_buffer); /** * kgdb_call_nmi_hook - Call kgdb_nmicallback() on the current CPU * @ignored: This parameter is only here to match the prototype. * * If you're using the default implementation of kgdb_roundup_cpus() * this function will be called per CPU. If you don't implement * kgdb_call_nmi_hook() a default will be used. */ extern void kgdb_call_nmi_hook(void *ignored); /** * kgdb_roundup_cpus - Get other CPUs into a holding pattern * * On SMP systems, we need to get the attention of the other CPUs * and get them into a known state. This should do what is needed * to get the other CPUs to call kgdb_wait(). Note that on some arches, * the NMI approach is not used for rounding up all the CPUs. Normally * those architectures can just not implement this and get the default. * * On non-SMP systems, this is not called. */ extern void kgdb_roundup_cpus(void); /** * kgdb_arch_set_pc - Generic call back to the program counter * @regs: Current &struct pt_regs. * @pc: The new value for the program counter * * This function handles updating the program counter and requires an * architecture specific implementation. */ extern void kgdb_arch_set_pc(struct pt_regs *regs, unsigned long pc); /* Optional functions. */ extern int kgdb_validate_break_address(unsigned long addr); extern int kgdb_arch_set_breakpoint(struct kgdb_bkpt *bpt); extern int kgdb_arch_remove_breakpoint(struct kgdb_bkpt *bpt); /** * kgdb_arch_late - Perform any architecture specific initialization. * * This function will handle the late initialization of any * architecture specific callbacks. This is an optional function for * handling things like late initialization of hw breakpoints. The * default implementation does nothing. */ extern void kgdb_arch_late(void); /** * struct kgdb_arch - Describe architecture specific values. * @gdb_bpt_instr: The instruction to trigger a breakpoint. * @flags: Flags for the breakpoint, currently just %KGDB_HW_BREAKPOINT. * @set_breakpoint: Allow an architecture to specify how to set a software * breakpoint. * @remove_breakpoint: Allow an architecture to specify how to remove a * software breakpoint. * @set_hw_breakpoint: Allow an architecture to specify how to set a hardware * breakpoint. * @remove_hw_breakpoint: Allow an architecture to specify how to remove a * hardware breakpoint. * @disable_hw_break: Allow an architecture to specify how to disable * hardware breakpoints for a single cpu. * @remove_all_hw_break: Allow an architecture to specify how to remove all * hardware breakpoints. * @correct_hw_break: Allow an architecture to specify how to correct the * hardware debug registers. * @enable_nmi: Manage NMI-triggered entry to KGDB */ struct kgdb_arch { … }; /** * struct kgdb_io - Describe the interface for an I/O driver to talk with KGDB. * @name: Name of the I/O driver. * @read_char: Pointer to a function that will return one char. * @write_char: Pointer to a function that will write one char. * @flush: Pointer to a function that will flush any pending writes. * @init: Pointer to a function that will initialize the device. * @deinit: Pointer to a function that will deinit the device. Implies that * this I/O driver is temporary and expects to be replaced. Called when * an I/O driver is replaced or explicitly unregistered. * @pre_exception: Pointer to a function that will do any prep work for * the I/O driver. * @post_exception: Pointer to a function that will do any cleanup work * for the I/O driver. * @cons: valid if the I/O device is a console; else NULL. */ struct kgdb_io { … }; extern const struct kgdb_arch arch_kgdb_ops; extern unsigned long kgdb_arch_pc(int exception, struct pt_regs *regs); #ifdef CONFIG_SERIAL_KGDB_NMI extern int kgdb_register_nmi_console(void); extern int kgdb_unregister_nmi_console(void); extern bool kgdb_nmi_poll_knock(void); #else static inline int kgdb_register_nmi_console(void) { return 0; } static inline int kgdb_unregister_nmi_console(void) { return 0; } static inline bool kgdb_nmi_poll_knock(void) { return true; } #endif extern int kgdb_register_io_module(struct kgdb_io *local_kgdb_io_ops); extern void kgdb_unregister_io_module(struct kgdb_io *local_kgdb_io_ops); extern struct kgdb_io *dbg_io_ops; extern int kgdb_hex2long(char **ptr, unsigned long *long_val); extern char *kgdb_mem2hex(char *mem, char *buf, int count); extern int kgdb_hex2mem(char *buf, char *mem, int count); extern int kgdb_isremovedbreak(unsigned long addr); extern int kgdb_has_hit_break(unsigned long addr); extern int kgdb_handle_exception(int ex_vector, int signo, int err_code, struct pt_regs *regs); extern int kgdb_nmicallback(int cpu, void *regs); extern int kgdb_nmicallin(int cpu, int trapnr, void *regs, int err_code, atomic_t *snd_rdy); extern void gdbstub_exit(int status); /* * kgdb and kprobes both use the same (kprobe) blocklist (which makes sense * given they are both typically hooked up to the same trap meaning on most * architectures one cannot be used to debug the other) * * However on architectures where kprobes is not (yet) implemented we permit * breakpoints everywhere rather than blocking everything by default. */ static inline bool kgdb_within_blocklist(unsigned long addr) { … } extern int kgdb_single_step; extern atomic_t kgdb_active; #define in_dbg_master() … extern bool dbg_is_early; extern void __init dbg_late_init(void); extern void kgdb_panic(const char *msg); extern void kgdb_free_init_mem(void); #else /* ! CONFIG_KGDB */ #define in_dbg_master … #define dbg_late_init … static inline void kgdb_panic(const char *msg) {} static inline void kgdb_free_init_mem(void) { } static inline int kgdb_nmicallback(int cpu, void *regs) { return 1; } #endif /* ! CONFIG_KGDB */ #endif /* _KGDB_H_ */
Codebase Browser
linux