linux/include/uapi/linux/libc-compat.h

/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
/*
 * Compatibility interface for userspace libc header coordination:
 *
 * Define compatibility macros that are used to control the inclusion or
 * exclusion of UAPI structures and definitions in coordination with another
 * userspace C library.
 *
 * This header is intended to solve the problem of UAPI definitions that
 * conflict with userspace definitions. If a UAPI header has such conflicting
 * definitions then the solution is as follows:
 *
 * * Synchronize the UAPI header and the libc headers so either one can be
 *   used and such that the ABI is preserved. If this is not possible then
 *   no simple compatibility interface exists (you need to write translating
 *   wrappers and rename things) and you can't use this interface.
 *
 * Then follow this process:
 *
 * (a) Include libc-compat.h in the UAPI header.
 *      e.g. #include <linux/libc-compat.h>
 *     This include must be as early as possible.
 *
 * (b) In libc-compat.h add enough code to detect that the comflicting
 *     userspace libc header has been included first.
 *
 * (c) If the userspace libc header has been included first define a set of
 *     guard macros of the form __UAPI_DEF_FOO and set their values to 1, else
 *     set their values to 0.
 *
 * (d) Back in the UAPI header with the conflicting definitions, guard the
 *     definitions with:
 *     #if __UAPI_DEF_FOO
 *       ...
 *     #endif
 *
 * This fixes the situation where the linux headers are included *after* the
 * libc headers. To fix the problem with the inclusion in the other order the
 * userspace libc headers must be fixed like this:
 *
 * * For all definitions that conflict with kernel definitions wrap those
 *   defines in the following:
 *   #if !__UAPI_DEF_FOO
 *     ...
 *   #endif
 *
 * This prevents the redefinition of a construct already defined by the kernel.
 */
#ifndef _UAPI_LIBC_COMPAT_H
#define _UAPI_LIBC_COMPAT_H

/* We have included glibc headers... */
#if defined(__GLIBC__)

/* Coordinate with glibc net/if.h header. */
#if defined(_NET_IF_H) && defined(__USE_MISC)

/* GLIBC headers included first so don't define anything
 * that would already be defined. */

#define __UAPI_DEF_IF_IFCONF
#define __UAPI_DEF_IF_IFMAP
#define __UAPI_DEF_IF_IFNAMSIZ
#define __UAPI_DEF_IF_IFREQ
/* Everything up to IFF_DYNAMIC, matches net/if.h until glibc 2.23 */
#define __UAPI_DEF_IF_NET_DEVICE_FLAGS
/* For the future if glibc adds IFF_LOWER_UP, IFF_DORMANT and IFF_ECHO */
#ifndef __UAPI_DEF_IF_NET_DEVICE_FLAGS_LOWER_UP_DORMANT_ECHO
#define __UAPI_DEF_IF_NET_DEVICE_FLAGS_LOWER_UP_DORMANT_ECHO
#endif /* __UAPI_DEF_IF_NET_DEVICE_FLAGS_LOWER_UP_DORMANT_ECHO */

#else /* _NET_IF_H */

/* Linux headers included first, and we must define everything
 * we need. The expectation is that glibc will check the
 * __UAPI_DEF_* defines and adjust appropriately. */

#define __UAPI_DEF_IF_IFCONF
#define __UAPI_DEF_IF_IFMAP
#define __UAPI_DEF_IF_IFNAMSIZ
#define __UAPI_DEF_IF_IFREQ
/* Everything up to IFF_DYNAMIC, matches net/if.h until glibc 2.23 */
#define __UAPI_DEF_IF_NET_DEVICE_FLAGS
/* For the future if glibc adds IFF_LOWER_UP, IFF_DORMANT and IFF_ECHO */
#define __UAPI_DEF_IF_NET_DEVICE_FLAGS_LOWER_UP_DORMANT_ECHO

#endif /* _NET_IF_H */

/* Coordinate with glibc netinet/in.h header. */
#if defined(_NETINET_IN_H)

/* GLIBC headers included first so don't define anything
 * that would already be defined. */
#define __UAPI_DEF_IN_ADDR
#define __UAPI_DEF_IN_IPPROTO
#define __UAPI_DEF_IN_PKTINFO
#define __UAPI_DEF_IP_MREQ
#define __UAPI_DEF_SOCKADDR_IN
#define __UAPI_DEF_IN_CLASS

#define __UAPI_DEF_IN6_ADDR
/* The exception is the in6_addr macros which must be defined
 * if the glibc code didn't define them. This guard matches
 * the guard in glibc/inet/netinet/in.h which defines the
 * additional in6_addr macros e.g. s6_addr16, and s6_addr32. */
#if defined(__USE_MISC) || defined (__USE_GNU)
#define __UAPI_DEF_IN6_ADDR_ALT
#else
#define __UAPI_DEF_IN6_ADDR_ALT
#endif
#define __UAPI_DEF_SOCKADDR_IN6
#define __UAPI_DEF_IPV6_MREQ
#define __UAPI_DEF_IPPROTO_V6
#define __UAPI_DEF_IPV6_OPTIONS
#define __UAPI_DEF_IN6_PKTINFO
#define __UAPI_DEF_IP6_MTUINFO

#else

/* Linux headers included first, and we must define everything
 * we need. The expectation is that glibc will check the
 * __UAPI_DEF_* defines and adjust appropriately. */
#define __UAPI_DEF_IN_ADDR
#define __UAPI_DEF_IN_IPPROTO
#define __UAPI_DEF_IN_PKTINFO
#define __UAPI_DEF_IP_MREQ
#define __UAPI_DEF_SOCKADDR_IN
#define __UAPI_DEF_IN_CLASS

#define __UAPI_DEF_IN6_ADDR
/* We unconditionally define the in6_addr macros and glibc must
 * coordinate. */
#define __UAPI_DEF_IN6_ADDR_ALT
#define __UAPI_DEF_SOCKADDR_IN6
#define __UAPI_DEF_IPV6_MREQ
#define __UAPI_DEF_IPPROTO_V6
#define __UAPI_DEF_IPV6_OPTIONS
#define __UAPI_DEF_IN6_PKTINFO
#define __UAPI_DEF_IP6_MTUINFO

#endif /* _NETINET_IN_H */

/* Coordinate with glibc netipx/ipx.h header. */
#if defined(__NETIPX_IPX_H)

#define __UAPI_DEF_SOCKADDR_IPX
#define __UAPI_DEF_IPX_ROUTE_DEFINITION
#define __UAPI_DEF_IPX_INTERFACE_DEFINITION
#define __UAPI_DEF_IPX_CONFIG_DATA
#define __UAPI_DEF_IPX_ROUTE_DEF

#else /* defined(__NETIPX_IPX_H) */

#define __UAPI_DEF_SOCKADDR_IPX
#define __UAPI_DEF_IPX_ROUTE_DEFINITION
#define __UAPI_DEF_IPX_INTERFACE_DEFINITION
#define __UAPI_DEF_IPX_CONFIG_DATA
#define __UAPI_DEF_IPX_ROUTE_DEF

#endif /* defined(__NETIPX_IPX_H) */

/* Definitions for xattr.h */
#if defined(_SYS_XATTR_H)
#define __UAPI_DEF_XATTR
#else
#define __UAPI_DEF_XATTR
#endif

/* If we did not see any headers from any supported C libraries,
 * or we are being included in the kernel, then define everything
 * that we need. Check for previous __UAPI_* definitions to give
 * unsupported C libraries a way to opt out of any kernel definition. */
#else /* !defined(__GLIBC__) */

/* Definitions for if.h */
#ifndef __UAPI_DEF_IF_IFCONF
#define __UAPI_DEF_IF_IFCONF
#endif
#ifndef __UAPI_DEF_IF_IFMAP
#define __UAPI_DEF_IF_IFMAP
#endif
#ifndef __UAPI_DEF_IF_IFNAMSIZ
#define __UAPI_DEF_IF_IFNAMSIZ
#endif
#ifndef __UAPI_DEF_IF_IFREQ
#define __UAPI_DEF_IF_IFREQ
#endif
/* Everything up to IFF_DYNAMIC, matches net/if.h until glibc 2.23 */
#ifndef __UAPI_DEF_IF_NET_DEVICE_FLAGS
#define __UAPI_DEF_IF_NET_DEVICE_FLAGS
#endif
/* For the future if glibc adds IFF_LOWER_UP, IFF_DORMANT and IFF_ECHO */
#ifndef __UAPI_DEF_IF_NET_DEVICE_FLAGS_LOWER_UP_DORMANT_ECHO
#define __UAPI_DEF_IF_NET_DEVICE_FLAGS_LOWER_UP_DORMANT_ECHO
#endif

/* Definitions for in.h */
#ifndef __UAPI_DEF_IN_ADDR
#define __UAPI_DEF_IN_ADDR
#endif
#ifndef __UAPI_DEF_IN_IPPROTO
#define __UAPI_DEF_IN_IPPROTO
#endif
#ifndef __UAPI_DEF_IN_PKTINFO
#define __UAPI_DEF_IN_PKTINFO
#endif
#ifndef __UAPI_DEF_IP_MREQ
#define __UAPI_DEF_IP_MREQ
#endif
#ifndef __UAPI_DEF_SOCKADDR_IN
#define __UAPI_DEF_SOCKADDR_IN
#endif
#ifndef __UAPI_DEF_IN_CLASS
#define __UAPI_DEF_IN_CLASS
#endif

/* Definitions for in6.h */
#ifndef __UAPI_DEF_IN6_ADDR
#define __UAPI_DEF_IN6_ADDR
#endif
#ifndef __UAPI_DEF_IN6_ADDR_ALT
#define __UAPI_DEF_IN6_ADDR_ALT
#endif
#ifndef __UAPI_DEF_SOCKADDR_IN6
#define __UAPI_DEF_SOCKADDR_IN6
#endif
#ifndef __UAPI_DEF_IPV6_MREQ
#define __UAPI_DEF_IPV6_MREQ
#endif
#ifndef __UAPI_DEF_IPPROTO_V6
#define __UAPI_DEF_IPPROTO_V6
#endif
#ifndef __UAPI_DEF_IPV6_OPTIONS
#define __UAPI_DEF_IPV6_OPTIONS
#endif
#ifndef __UAPI_DEF_IN6_PKTINFO
#define __UAPI_DEF_IN6_PKTINFO
#endif
#ifndef __UAPI_DEF_IP6_MTUINFO
#define __UAPI_DEF_IP6_MTUINFO
#endif

/* Definitions for ipx.h */
#ifndef __UAPI_DEF_SOCKADDR_IPX
#define __UAPI_DEF_SOCKADDR_IPX
#endif
#ifndef __UAPI_DEF_IPX_ROUTE_DEFINITION
#define __UAPI_DEF_IPX_ROUTE_DEFINITION
#endif
#ifndef __UAPI_DEF_IPX_INTERFACE_DEFINITION
#define __UAPI_DEF_IPX_INTERFACE_DEFINITION
#endif
#ifndef __UAPI_DEF_IPX_CONFIG_DATA
#define __UAPI_DEF_IPX_CONFIG_DATA
#endif
#ifndef __UAPI_DEF_IPX_ROUTE_DEF
#define __UAPI_DEF_IPX_ROUTE_DEF
#endif

/* Definitions for xattr.h */
#ifndef __UAPI_DEF_XATTR
#define __UAPI_DEF_XATTR
#endif

#endif /* __GLIBC__ */

#endif /* _UAPI_LIBC_COMPAT_H */