# SPDX-License-Identifier: GPL-2.0-only
# ALSA USB drivers
menuconfig SND_USB
bool "USB sound devices"
depends on USB
default y
help
Support for sound devices connected via the USB bus.
if SND_USB && USB
config SND_USB_AUDIO
tristate "USB Audio/MIDI driver"
select SND_HWDEP
select SND_RAWMIDI
select SND_PCM
select SND_UMP if SND_USB_AUDIO_MIDI_V2
select BITREVERSE
select SND_USB_AUDIO_USE_MEDIA_CONTROLLER if MEDIA_CONTROLLER && (MEDIA_SUPPORT=y || MEDIA_SUPPORT=SND_USB_AUDIO)
help
Say Y here to include support for USB audio and USB MIDI
devices.
To compile this driver as a module, choose M here: the module
will be called snd-usb-audio.
config SND_USB_AUDIO_MIDI_V2
bool "MIDI 2.0 support by USB Audio driver"
depends on SND_USB_AUDIO
help
Say Y here to include the support for MIDI 2.0 by USB Audio driver.
When the config is set, the driver tries to probe MIDI 2.0 interface
at first, then falls back to MIDI 1.0 interface as default.
The MIDI 2.0 support can be disabled dynamically via midi2_enable
module option, too.
config SND_USB_AUDIO_USE_MEDIA_CONTROLLER
bool
config SND_USB_UA101
tristate "Edirol UA-101/UA-1000 driver"
select SND_PCM
select SND_RAWMIDI
help
Say Y here to include support for the Edirol UA-101 and UA-1000
audio/MIDI interfaces.
To compile this driver as a module, choose M here: the module
will be called snd-ua101.
config SND_USB_USX2Y
tristate "Tascam US-122, US-224 and US-428 USB driver"
depends on X86 || PPC || ALPHA
select SND_HWDEP
select SND_RAWMIDI
select SND_PCM
help
Say Y here to include support for Tascam USB Audio/MIDI
interfaces or controllers US-122, US-224 and US-428.
To compile this driver as a module, choose M here: the module
will be called snd-usb-usx2y.
config SND_USB_CAIAQ
tristate "Native Instruments USB audio devices"
select SND_HWDEP
select SND_RAWMIDI
select SND_PCM
help
Say Y here to include support for caiaq USB audio interfaces,
namely:
* Native Instruments RigKontrol2
* Native Instruments RigKontrol3
* Native Instruments Kore Controller
* Native Instruments Kore Controller 2
* Native Instruments Audio Kontrol 1
* Native Instruments Audio 2 DJ
* Native Instruments Audio 4 DJ
* Native Instruments Audio 8 DJ
* Native Instruments Traktor Audio 2
* Native Instruments Guitar Rig Session I/O
* Native Instruments Guitar Rig mobile
* Native Instruments Traktor Kontrol X1
* Native Instruments Traktor Kontrol S4
* Native Instruments Maschine Controller
To compile this driver as a module, choose M here: the module
will be called snd-usb-caiaq.
config SND_USB_CAIAQ_INPUT
bool "enable input device for controllers"
depends on SND_USB_CAIAQ
depends on INPUT=y || INPUT=SND_USB_CAIAQ
help
Say Y here to support input controllers like buttons, knobs,
alpha dials and analog pedals on the following products:
* Native Instruments RigKontrol2
* Native Instruments RigKontrol3
* Native Instruments Kore Controller
* Native Instruments Kore Controller 2
* Native Instruments Audio Kontrol 1
* Native Instruments Traktor Kontrol S4
* Native Instruments Maschine Controller
config SND_USB_US122L
tristate "Tascam US-122L USB driver"
depends on X86 || COMPILE_TEST
select SND_HWDEP
select SND_RAWMIDI
help
Say Y here to include support for Tascam US-122L USB Audio/MIDI
interfaces.
To compile this driver as a module, choose M here: the module
will be called snd-usb-us122l.
config SND_USB_6FIRE
tristate "TerraTec DMX 6Fire USB"
select FW_LOADER
select BITREVERSE
select SND_RAWMIDI
select SND_PCM
select SND_VMASTER
help
Say Y here to include support for TerraTec 6fire DMX USB interface.
You will need firmware files in order to be able to use the device
after it has been coldstarted. An install script for the firmware
and further help can be found at
http://sixfireusb.sourceforge.net
config SND_USB_HIFACE
tristate "M2Tech hiFace USB-SPDIF driver"
select SND_PCM
help
Select this option to include support for M2Tech hiFace USB-SPDIF
interface.
This driver supports the original M2Tech hiFace and some other
compatible devices. The supported products are:
* M2Tech Young
* M2Tech hiFace
* M2Tech North Star
* M2Tech W4S Young
* M2Tech Corrson
* M2Tech AUDIA
* M2Tech SL Audio
* M2Tech Empirical
* M2Tech Rockna
* M2Tech Pathos
* M2Tech Metronome
* M2Tech CAD
* M2Tech Audio Esclusive
* M2Tech Rotel
* M2Tech Eeaudio
* The Chord Company CHORD
* AVA Group A/S Vitus
To compile this driver as a module, choose M here: the module
will be called snd-usb-hiface.
config SND_BCD2000
tristate "Behringer BCD2000 MIDI driver"
select SND_RAWMIDI
help
Say Y here to include MIDI support for the Behringer BCD2000 DJ
controller.
Audio support is still work-in-progress at
https://github.com/anyc/snd-usb-bcd2000
To compile this driver as a module, choose M here: the module
will be called snd-bcd2000.
source "sound/usb/line6/Kconfig"
endif # SND_USB
Codebase Browser
linux