#!/bin/bash
# SPDX-License-Identifier: GPL-2.0
ipv6=false
source ./hsr_common.sh
do_complete_ping_test()
{
echo "INFO: Initial validation ping (HSR-SAN/RedBox)."
# Each node has to be able to reach each one.
do_ping "${ns1}" 100.64.0.2
do_ping "${ns2}" 100.64.0.1
# Ping between SANs (test bridge)
do_ping "${ns4}" 100.64.0.51
do_ping "${ns5}" 100.64.0.41
# Ping from SANs to hsr1 (via hsr2) (and opposite)
do_ping "${ns3}" 100.64.0.1
do_ping "${ns1}" 100.64.0.3
do_ping "${ns1}" 100.64.0.41
do_ping "${ns4}" 100.64.0.1
do_ping "${ns1}" 100.64.0.51
do_ping "${ns5}" 100.64.0.1
stop_if_error "Initial validation failed."
# Wait for MGNT HSR frames being received and nodes being
# merged.
sleep 5
echo "INFO: Longer ping test (HSR-SAN/RedBox)."
# Ping from SAN to hsr1 (via hsr2)
do_ping_long "${ns3}" 100.64.0.1
# Ping from hsr1 (via hsr2) to SANs (and opposite)
do_ping_long "${ns1}" 100.64.0.3
do_ping_long "${ns1}" 100.64.0.41
do_ping_long "${ns4}" 100.64.0.1
do_ping_long "${ns1}" 100.64.0.51
do_ping_long "${ns5}" 100.64.0.1
stop_if_error "Longer ping test failed."
echo "INFO: All good."
}
setup_hsr_interfaces()
{
local HSRv="$1"
echo "INFO: preparing interfaces for HSRv${HSRv} (HSR-SAN/RedBox)."
#
# IPv4 addresses (100.64.X.Y/24), and [X.Y] is presented on below diagram:
#
#
# |NS1 | |NS4 |
# | [0.1] | | |
# | /-- hsr1 --\ | | [0.41] |
# | ns1eth1 ns1eth2 | | ns4eth1 (SAN) |
# |------------------------| |-------------------|
# | | |
# | | |
# | | |
# |------------------------| |-------------------------------|
# | ns2eth1 ns2eth2 | | ns3eth2 |
# | \-- hsr2 --/ | | / |
# | [0.2] \ | | / | |------------|
# | ns2eth3 |---| ns3eth1 -- ns3br1 -- ns3eth3--|--| ns5eth1 |
# | (interlink)| | [0.3] [0.11] | | [0.51] |
# |NS2 (RedBOX) | |NS3 (BR) | | NS5 (SAN) |
#
#
# Check if iproute2 supports adding interlink port to hsrX device
ip link help hsr | grep -q INTERLINK
[ $? -ne 0 ] && { echo "iproute2: HSR interlink interface not supported!"; exit 0; }
# Create interfaces for name spaces
ip link add ns1eth1 netns "${ns1}" type veth peer name ns2eth1 netns "${ns2}"
ip link add ns1eth2 netns "${ns1}" type veth peer name ns2eth2 netns "${ns2}"
ip link add ns2eth3 netns "${ns2}" type veth peer name ns3eth1 netns "${ns3}"
ip link add ns3eth2 netns "${ns3}" type veth peer name ns4eth1 netns "${ns4}"
ip link add ns3eth3 netns "${ns3}" type veth peer name ns5eth1 netns "${ns5}"
sleep 1
ip -n "${ns1}" link set ns1eth1 up
ip -n "${ns1}" link set ns1eth2 up
ip -n "${ns2}" link set ns2eth1 up
ip -n "${ns2}" link set ns2eth2 up
ip -n "${ns2}" link set ns2eth3 up
ip -n "${ns3}" link add name ns3br1 type bridge
ip -n "${ns3}" link set ns3br1 up
ip -n "${ns3}" link set ns3eth1 master ns3br1 up
ip -n "${ns3}" link set ns3eth2 master ns3br1 up
ip -n "${ns3}" link set ns3eth3 master ns3br1 up
ip -n "${ns4}" link set ns4eth1 up
ip -n "${ns5}" link set ns5eth1 up
ip -net "$ns1" link set address 00:11:22:00:01:01 dev ns1eth1
ip -net "$ns1" link set address 00:11:22:00:01:02 dev ns1eth2
ip -net "$ns2" link set address 00:11:22:00:02:01 dev ns2eth1
ip -net "$ns2" link set address 00:11:22:00:02:02 dev ns2eth2
ip -net "$ns2" link set address 00:11:22:00:02:03 dev ns2eth3
ip -net "$ns3" link set address 00:11:22:00:03:11 dev ns3eth1
ip -net "$ns3" link set address 00:11:22:00:03:11 dev ns3eth2
ip -net "$ns3" link set address 00:11:22:00:03:11 dev ns3eth3
ip -net "$ns3" link set address 00:11:22:00:03:11 dev ns3br1
ip -net "$ns4" link set address 00:11:22:00:04:01 dev ns4eth1
ip -net "$ns5" link set address 00:11:22:00:05:01 dev ns5eth1
ip -net "${ns1}" link add name hsr1 type hsr slave1 ns1eth1 slave2 ns1eth2 supervision 45 version ${HSRv} proto 0
ip -net "${ns2}" link add name hsr2 type hsr slave1 ns2eth1 slave2 ns2eth2 interlink ns2eth3 supervision 45 version ${HSRv} proto 0
ip -n "${ns1}" addr add 100.64.0.1/24 dev hsr1
ip -n "${ns2}" addr add 100.64.0.2/24 dev hsr2
ip -n "${ns3}" addr add 100.64.0.11/24 dev ns3br1
ip -n "${ns3}" addr add 100.64.0.3/24 dev ns3eth1
ip -n "${ns4}" addr add 100.64.0.41/24 dev ns4eth1
ip -n "${ns5}" addr add 100.64.0.51/24 dev ns5eth1
ip -n "${ns1}" link set hsr1 up
ip -n "${ns2}" link set hsr2 up
}
check_prerequisites
setup_ns ns1 ns2 ns3 ns4 ns5
trap cleanup_all_ns EXIT
setup_hsr_interfaces 1
do_complete_ping_test
exit $ret