#!/bin/bash
# SPDX-License-Identifier: GPL-2.0
# This test is for checking the [no]localbypass VXLAN device option. The test
# configures two VXLAN devices in the same network namespace and a tc filter on
# the loopback device that drops encapsulated packets. The test sends packets
# from the first VXLAN device and verifies that by default these packets are
# received by the second VXLAN device. The test then enables the nolocalbypass
# option and verifies that packets are no longer received by the second VXLAN
# device.
source lib.sh
ret=0
TESTS="
nolocalbypass
"
VERBOSE=0
PAUSE_ON_FAIL=no
PAUSE=no
################################################################################
# Utilities
log_test()
{
local rc=$1
local expected=$2
local msg="$3"
if [ ${rc} -eq ${expected} ]; then
printf "TEST: %-60s [ OK ]\n" "${msg}"
nsuccess=$((nsuccess+1))
else
ret=1
nfail=$((nfail+1))
printf "TEST: %-60s [FAIL]\n" "${msg}"
if [ "$VERBOSE" = "1" ]; then
echo " rc=$rc, expected $expected"
fi
if [ "${PAUSE_ON_FAIL}" = "yes" ]; then
echo
echo "hit enter to continue, 'q' to quit"
read a
[ "$a" = "q" ] && exit 1
fi
fi
if [ "${PAUSE}" = "yes" ]; then
echo
echo "hit enter to continue, 'q' to quit"
read a
[ "$a" = "q" ] && exit 1
fi
[ "$VERBOSE" = "1" ] && echo
}
run_cmd()
{
local cmd="$1"
local out
local stderr="2>/dev/null"
if [ "$VERBOSE" = "1" ]; then
printf "COMMAND: $cmd\n"
stderr=
fi
out=$(eval $cmd $stderr)
rc=$?
if [ "$VERBOSE" = "1" -a -n "$out" ]; then
echo " $out"
fi
return $rc
}
tc_check_packets()
{
local ns=$1; shift
local id=$1; shift
local handle=$1; shift
local count=$1; shift
local pkts
sleep 0.1
pkts=$(tc -n $ns -j -s filter show $id \
| jq ".[] | select(.options.handle == $handle) | \
.options.actions[0].stats.packets")
[[ $pkts == $count ]]
}
################################################################################
# Setup
setup()
{
setup_ns ns1
ip -n $ns1 address add 192.0.2.1/32 dev lo
ip -n $ns1 address add 198.51.100.1/32 dev lo
ip -n $ns1 link add name vx0 up type vxlan id 100 local 198.51.100.1 \
dstport 4789 nolearning
ip -n $ns1 link add name vx1 up type vxlan id 100 dstport 4790
}
cleanup()
{
cleanup_ns $ns1
}
################################################################################
# Tests
nolocalbypass()
{
local smac=00:01:02:03:04:05
local dmac=00:0a:0b:0c:0d:0e
run_cmd "bridge -n $ns1 fdb add $dmac dev vx0 self static dst 192.0.2.1 port 4790"
run_cmd "tc -n $ns1 qdisc add dev vx1 clsact"
run_cmd "tc -n $ns1 filter add dev vx1 ingress pref 1 handle 101 proto all flower src_mac $smac dst_mac $dmac action pass"
run_cmd "tc -n $ns1 qdisc add dev lo clsact"
run_cmd "tc -n $ns1 filter add dev lo ingress pref 1 handle 101 proto ip flower ip_proto udp dst_port 4790 action drop"
run_cmd "ip -n $ns1 -d -j link show dev vx0 | jq -e '.[][\"linkinfo\"][\"info_data\"][\"localbypass\"] == true'"
log_test $? 0 "localbypass enabled"
run_cmd "ip netns exec $ns1 mausezahn vx0 -a $smac -b $dmac -c 1 -p 100 -q"
tc_check_packets "$ns1" "dev vx1 ingress" 101 1
log_test $? 0 "Packet received by local VXLAN device - localbypass"
run_cmd "ip -n $ns1 link set dev vx0 type vxlan nolocalbypass"
run_cmd "ip -n $ns1 -d -j link show dev vx0 | jq -e '.[][\"linkinfo\"][\"info_data\"][\"localbypass\"] == false'"
log_test $? 0 "localbypass disabled"
run_cmd "ip netns exec $ns1 mausezahn vx0 -a $smac -b $dmac -c 1 -p 100 -q"
tc_check_packets "$ns1" "dev vx1 ingress" 101 1
log_test $? 0 "Packet not received by local VXLAN device - nolocalbypass"
run_cmd "ip -n $ns1 link set dev vx0 type vxlan localbypass"
run_cmd "ip -n $ns1 -d -j link show dev vx0 | jq -e '.[][\"linkinfo\"][\"info_data\"][\"localbypass\"] == true'"
log_test $? 0 "localbypass enabled"
run_cmd "ip netns exec $ns1 mausezahn vx0 -a $smac -b $dmac -c 1 -p 100 -q"
tc_check_packets "$ns1" "dev vx1 ingress" 101 2
log_test $? 0 "Packet received by local VXLAN device - localbypass"
}
################################################################################
# Usage
usage()
{
cat <<EOF
usage: ${0##*/} OPTS
-t <test> Test(s) to run (default: all)
(options: $TESTS)
-p Pause on fail
-P Pause after each test before cleanup
-v Verbose mode (show commands and output)
EOF
}
################################################################################
# Main
trap cleanup EXIT
while getopts ":t:pPvh" opt; do
case $opt in
t) TESTS=$OPTARG ;;
p) PAUSE_ON_FAIL=yes;;
P) PAUSE=yes;;
v) VERBOSE=$(($VERBOSE + 1));;
h) usage; exit 0;;
*) usage; exit 1;;
esac
done
# Make sure we don't pause twice.
[ "${PAUSE}" = "yes" ] && PAUSE_ON_FAIL=no
if [ "$(id -u)" -ne 0 ];then
echo "SKIP: Need root privileges"
exit $ksft_skip;
fi
if [ ! -x "$(command -v ip)" ]; then
echo "SKIP: Could not run test without ip tool"
exit $ksft_skip
fi
if [ ! -x "$(command -v bridge)" ]; then
echo "SKIP: Could not run test without bridge tool"
exit $ksft_skip
fi
if [ ! -x "$(command -v mausezahn)" ]; then
echo "SKIP: Could not run test without mausezahn tool"
exit $ksft_skip
fi
if [ ! -x "$(command -v jq)" ]; then
echo "SKIP: Could not run test without jq tool"
exit $ksft_skip
fi
ip link help vxlan 2>&1 | grep -q "localbypass"
if [ $? -ne 0 ]; then
echo "SKIP: iproute2 ip too old, missing VXLAN nolocalbypass support"
exit $ksft_skip
fi
cleanup
for t in $TESTS
do
setup; $t; cleanup;
done
if [ "$TESTS" != "none" ]; then
printf "\nTests passed: %3d\n" ${nsuccess}
printf "Tests failed: %3d\n" ${nfail}
fi
exit $ret
Codebase Browser
linux