#!/bin/bash
# SPDX-License-Identifier: GPL-2.0
#
# Test bonding options with mode 1,5,6
ALL_TESTS="
prio
arp_validate
num_grat_arp
"
lib_dir=$(dirname "$0")
source ${lib_dir}/bond_topo_3d1c.sh
skip_prio()
{
local skip=1
# check if iproute support prio option
ip -n ${s_ns} link set eth0 type bond_slave prio 10
[[ $? -ne 0 ]] && skip=0
# check if kernel support prio option
ip -n ${s_ns} -d link show eth0 | grep -q "prio 10"
[[ $? -ne 0 ]] && skip=0
return $skip
}
skip_ns()
{
local skip=1
# check if iproute support ns_ip6_target option
ip -n ${s_ns} link add bond1 type bond ns_ip6_target ${g_ip6}
[[ $? -ne 0 ]] && skip=0
# check if kernel support ns_ip6_target option
ip -n ${s_ns} -d link show bond1 | grep -q "ns_ip6_target ${g_ip6}"
[[ $? -ne 0 ]] && skip=0
ip -n ${s_ns} link del bond1
return $skip
}
active_slave=""
active_slave_changed()
{
local old_active_slave=$1
local new_active_slave=$(cmd_jq "ip -n ${s_ns} -d -j link show bond0" \
".[].linkinfo.info_data.active_slave")
[ "$new_active_slave" != "$old_active_slave" -a "$new_active_slave" != "null" ]
}
check_active_slave()
{
local target_active_slave=$1
slowwait 5 active_slave_changed $active_slave
active_slave=$(cmd_jq "ip -n ${s_ns} -d -j link show bond0" ".[].linkinfo.info_data.active_slave")
test "$active_slave" = "$target_active_slave"
check_err $? "Current active slave is $active_slave but not $target_active_slave"
}
# Test bonding prio option
prio_test()
{
local param="$1"
RET=0
# create bond
bond_reset "${param}"
# set active_slave to primary eth1 specifically
ip -n ${s_ns} link set bond0 type bond active_slave eth1
# check bonding member prio value
ip -n ${s_ns} link set eth0 type bond_slave prio 0
ip -n ${s_ns} link set eth1 type bond_slave prio 10
ip -n ${s_ns} link set eth2 type bond_slave prio 11
cmd_jq "ip -n ${s_ns} -d -j link show eth0" \
".[].linkinfo.info_slave_data | select (.prio == 0)" "-e" &> /dev/null
check_err $? "eth0 prio is not 0"
cmd_jq "ip -n ${s_ns} -d -j link show eth1" \
".[].linkinfo.info_slave_data | select (.prio == 10)" "-e" &> /dev/null
check_err $? "eth1 prio is not 10"
cmd_jq "ip -n ${s_ns} -d -j link show eth2" \
".[].linkinfo.info_slave_data | select (.prio == 11)" "-e" &> /dev/null
check_err $? "eth2 prio is not 11"
bond_check_connection "setup"
# active slave should be the primary slave
check_active_slave eth1
# active slave should be the higher prio slave
ip -n ${s_ns} link set $active_slave down
check_active_slave eth2
bond_check_connection "fail over"
# when only 1 slave is up
ip -n ${s_ns} link set $active_slave down
check_active_slave eth0
bond_check_connection "only 1 slave up"
# when a higher prio slave change to up
ip -n ${s_ns} link set eth2 up
bond_check_connection "higher prio slave up"
case $primary_reselect in
"0")
check_active_slave "eth2"
;;
"1")
check_active_slave "eth0"
;;
"2")
check_active_slave "eth0"
;;
esac
local pre_active_slave=$active_slave
# when the primary slave change to up
ip -n ${s_ns} link set eth1 up
bond_check_connection "primary slave up"
case $primary_reselect in
"0")
check_active_slave "eth1"
;;
"1")
check_active_slave "$pre_active_slave"
;;
"2")
check_active_slave "$pre_active_slave"
ip -n ${s_ns} link set $active_slave down
bond_check_connection "pre_active slave down"
check_active_slave "eth1"
;;
esac
# Test changing bond slave prio
if [[ "$primary_reselect" == "0" ]];then
ip -n ${s_ns} link set eth0 type bond_slave prio 1000000
ip -n ${s_ns} link set eth1 type bond_slave prio 0
ip -n ${s_ns} link set eth2 type bond_slave prio -50
ip -n ${s_ns} -d link show eth0 | grep -q 'prio 1000000'
check_err $? "eth0 prio is not 1000000"
ip -n ${s_ns} -d link show eth1 | grep -q 'prio 0'
check_err $? "eth1 prio is not 0"
ip -n ${s_ns} -d link show eth2 | grep -q 'prio -50'
check_err $? "eth3 prio is not -50"
check_active_slave "eth1"
ip -n ${s_ns} link set $active_slave down
check_active_slave "eth0"
bond_check_connection "change slave prio"
fi
}
prio_miimon()
{
local primary_reselect
local mode=$1
for primary_reselect in 0 1 2; do
prio_test "mode $mode miimon 100 primary eth1 primary_reselect $primary_reselect"
log_test "prio" "$mode miimon primary_reselect $primary_reselect"
done
}
prio_arp()
{
local primary_reselect
local mode=$1
for primary_reselect in 0 1 2; do
prio_test "mode $mode arp_interval 100 arp_ip_target ${g_ip4} primary eth1 primary_reselect $primary_reselect"
log_test "prio" "$mode arp_ip_target primary_reselect $primary_reselect"
done
}
prio_ns()
{
local primary_reselect
local mode=$1
if skip_ns; then
log_test_skip "prio ns" "Current iproute or kernel doesn't support bond option 'ns_ip6_target'."
return 0
fi
for primary_reselect in 0 1 2; do
prio_test "mode $mode arp_interval 100 ns_ip6_target ${g_ip6} primary eth1 primary_reselect $primary_reselect"
log_test "prio" "$mode ns_ip6_target primary_reselect $primary_reselect"
done
}
prio()
{
local mode modes="active-backup balance-tlb balance-alb"
if skip_prio; then
log_test_skip "prio" "Current iproute or kernel doesn't support bond option 'prio'."
return 0
fi
for mode in $modes; do
prio_miimon $mode
done
prio_arp "active-backup"
prio_ns "active-backup"
}
wait_mii_up()
{
for i in $(seq 0 2); do
mii_status=$(cmd_jq "ip -n ${s_ns} -j -d link show eth$i" ".[].linkinfo.info_slave_data.mii_status")
[ ${mii_status} != "UP" ] && return 1
done
return 0
}
arp_validate_test()
{
local param="$1"
RET=0
# create bond
bond_reset "${param}"
bond_check_connection
[ $RET -ne 0 ] && log_test "arp_validate" "$retmsg"
# wait for a while to make sure the mii status stable
slowwait 5 wait_mii_up
for i in $(seq 0 2); do
mii_status=$(cmd_jq "ip -n ${s_ns} -j -d link show eth$i" ".[].linkinfo.info_slave_data.mii_status")
if [ ${mii_status} != "UP" ]; then
RET=1
log_test "arp_validate" "interface eth$i mii_status $mii_status"
fi
done
}
arp_validate_arp()
{
local mode=$1
local val
for val in $(seq 0 6); do
arp_validate_test "mode $mode arp_interval 100 arp_ip_target ${g_ip4} arp_validate $val"
log_test "arp_validate" "$mode arp_ip_target arp_validate $val"
done
}
arp_validate_ns()
{
local mode=$1
local val
if skip_ns; then
log_test_skip "arp_validate ns" "Current iproute or kernel doesn't support bond option 'ns_ip6_target'."
return 0
fi
for val in $(seq 0 6); do
arp_validate_test "mode $mode arp_interval 100 ns_ip6_target ${g_ip6} arp_validate $val"
log_test "arp_validate" "$mode ns_ip6_target arp_validate $val"
done
}
arp_validate()
{
arp_validate_arp "active-backup"
arp_validate_ns "active-backup"
}
garp_test()
{
local param="$1"
local active_slave exp_num real_num i
RET=0
# create bond
bond_reset "${param}"
bond_check_connection
[ $RET -ne 0 ] && log_test "num_grat_arp" "$retmsg"
# Add tc rules to count GARP number
for i in $(seq 0 2); do
tc -n ${g_ns} filter add dev s$i ingress protocol arp pref 1 handle 101 \
flower skip_hw arp_op request arp_sip ${s_ip4} arp_tip ${s_ip4} action pass
done
# Do failover
active_slave=$(cmd_jq "ip -n ${s_ns} -d -j link show bond0" ".[].linkinfo.info_data.active_slave")
ip -n ${s_ns} link set ${active_slave} down
# wait for active link change
slowwait 2 active_slave_changed $active_slave
exp_num=$(echo "${param}" | cut -f6 -d ' ')
active_slave=$(cmd_jq "ip -n ${s_ns} -d -j link show bond0" ".[].linkinfo.info_data.active_slave")
slowwait_for_counter $((exp_num + 5)) $exp_num \
tc_rule_handle_stats_get "dev s${active_slave#eth} ingress" 101 ".packets" "-n ${g_ns}"
# check result
real_num=$(tc_rule_handle_stats_get "dev s${active_slave#eth} ingress" 101 ".packets" "-n ${g_ns}")
if [ "${real_num}" -ne "${exp_num}" ]; then
echo "$real_num garp packets sent on active slave ${active_slave}"
RET=1
fi
for i in $(seq 0 2); do
tc -n ${g_ns} filter del dev s$i ingress
done
}
num_grat_arp()
{
local val
for val in 10 20 30; do
garp_test "mode active-backup miimon 10 num_grat_arp $val peer_notify_delay 100"
log_test "num_grat_arp" "active-backup miimon num_grat_arp $val"
done
}
trap cleanup EXIT
setup_prepare
setup_wait
tests_run
exit $EXIT_STATUS
Codebase Browser
linux