#!/bin/bash
# SPDX-License-Identifier: GPL-2.0
# Copyright 2020 NXP
WAIT_TIME=1
NUM_NETIFS=4
STABLE_MAC_ADDRS=yes
lib_dir=$(dirname $0)/../../../net/forwarding
source $lib_dir/tc_common.sh
source $lib_dir/lib.sh
require_command tcpdump
h1=${NETIFS[p1]}
swp1=${NETIFS[p2]}
swp2=${NETIFS[p3]}
h2=${NETIFS[p4]}
# Helpers to map a VCAP IS1 and VCAP IS2 lookup and policy to a chain number
# used by the kernel driver. The numbers are:
# VCAP IS1 lookup 0: 10000
# VCAP IS1 lookup 1: 11000
# VCAP IS1 lookup 2: 12000
# VCAP IS2 lookup 0 policy 0: 20000
# VCAP IS2 lookup 0 policy 1: 20001
# VCAP IS2 lookup 0 policy 255: 20255
# VCAP IS2 lookup 1 policy 0: 21000
# VCAP IS2 lookup 1 policy 1: 21001
# VCAP IS2 lookup 1 policy 255: 21255
IS1()
{
local lookup=$1
echo $((10000 + 1000 * lookup))
}
IS2()
{
local lookup=$1
local pag=$2
echo $((20000 + 1000 * lookup + pag))
}
ES0()
{
echo 0
}
# The Ocelot switches have a fixed ingress pipeline composed of:
#
# +----------------------------------------------+ +-----------------------------------------+
# | VCAP IS1 | | VCAP IS2 |
# | | | |
# | +----------+ +----------+ +----------+ | | +----------+ +----------+ |
# | | Lookup 0 | | Lookup 1 | | Lookup 2 | | --+------> PAG 0: | Lookup 0 | -> | Lookup 1 | |
# | +----------+ -> +----------+ -> +----------+ | | | +----------+ +----------+ |
# | |key&action| |key&action| |key&action| | | | |key&action| |key&action| |
# | |key&action| |key&action| |key&action| | | | | .. | | .. | |
# | | .. | | .. | | .. | | | | +----------+ +----------+ |
# | +----------+ +----------+ +----------+ | | | |
# | selects PAG | | | +----------+ +----------+ |
# +----------------------------------------------+ +------> PAG 1: | Lookup 0 | -> | Lookup 1 | |
# | | +----------+ +----------+ |
# | | |key&action| |key&action| |
# | | | .. | | .. | |
# | | +----------+ +----------+ |
# | | ... |
# | | |
# | | +----------+ +----------+ |
# +----> PAG 254: | Lookup 0 | -> | Lookup 1 | |
# | | +----------+ +----------+ |
# | | |key&action| |key&action| |
# | | | .. | | .. | |
# | | +----------+ +----------+ |
# | | |
# | | +----------+ +----------+ |
# +----> PAG 255: | Lookup 0 | -> | Lookup 1 | |
# | +----------+ +----------+ |
# | |key&action| |key&action| |
# | | .. | | .. | |
# | +----------+ +----------+ |
# +-----------------------------------------+
#
# Both the VCAP IS1 (Ingress Stage 1) and IS2 (Ingress Stage 2) are indexed
# (looked up) multiple times: IS1 3 times, and IS2 2 times. Each filter
# (key and action pair) can be configured to only match during the first, or
# second, etc, lookup.
#
# During one TCAM lookup, the filter processing stops at the first entry that
# matches, then the pipeline jumps to the next lookup.
# The driver maps each individual lookup of each individual ingress TCAM to a
# separate chain number. For correct rule offloading, it is mandatory that each
# filter installed in one TCAM is terminated by a non-optional GOTO action to
# the next lookup from the fixed pipeline.
#
# A chain can only be used if there is a GOTO action correctly set up from the
# prior lookup in the processing pipeline. Setting up all chains is not
# mandatory.
# NOTE: VCAP IS1 currently uses only S1_NORMAL half keys and VCAP IS2
# dynamically chooses between MAC_ETYPE, ARP, IP4_TCP_UDP, IP4_OTHER, which are
# all half keys as well.
create_tcam_skeleton()
{
local eth=$1
tc qdisc add dev $eth clsact
# VCAP IS1 is the Ingress Classification TCAM and can offload the
# following actions:
# - skbedit priority
# - vlan pop
# - vlan modify
# - goto (only in lookup 2, the last IS1 lookup)
tc filter add dev $eth ingress chain 0 pref 49152 flower \
skip_sw action goto chain $(IS1 0)
tc filter add dev $eth ingress chain $(IS1 0) pref 49152 \
flower skip_sw action goto chain $(IS1 1)
tc filter add dev $eth ingress chain $(IS1 1) pref 49152 \
flower skip_sw action goto chain $(IS1 2)
tc filter add dev $eth ingress chain $(IS1 2) pref 49152 \
flower skip_sw action goto chain $(IS2 0 0)
# VCAP IS2 is the Security Enforcement ingress TCAM and can offload the
# following actions:
# - trap
# - drop
# - police
# The two VCAP IS2 lookups can be segmented into up to 256 groups of
# rules, called Policies. A Policy is selected through the Policy
# Association Group (PAG) action of VCAP IS1 (which is the
# GOTO offload).
tc filter add dev $eth ingress chain $(IS2 0 0) pref 49152 \
flower skip_sw action goto chain $(IS2 1 0)
}
setup_prepare()
{
ip link set $swp1 up
ip link set $swp2 up
ip link set $h2 up
ip link set $h1 up
create_tcam_skeleton $swp1
ip link add br0 type bridge
ip link set $swp1 master br0
ip link set $swp2 master br0
ip link set br0 up
ip link add link $h1 name $h1.100 type vlan id 100
ip link set $h1.100 up
ip link add link $h1 name $h1.200 type vlan id 200
ip link set $h1.200 up
tc filter add dev $swp1 ingress chain $(IS1 1) pref 1 \
protocol 802.1Q flower skip_sw vlan_id 100 \
action vlan pop \
action goto chain $(IS1 2)
tc filter add dev $swp1 egress chain $(ES0) pref 1 \
flower skip_sw indev $swp2 \
action vlan push protocol 802.1Q id 100
tc filter add dev $swp1 ingress chain $(IS1 0) pref 2 \
protocol ipv4 flower skip_sw src_ip 10.1.1.2 \
action skbedit priority 7 \
action goto chain $(IS1 1)
tc filter add dev $swp1 ingress chain $(IS2 0 0) pref 1 \
protocol ipv4 flower skip_sw ip_proto udp dst_port 5201 \
action police rate 50mbit burst 64k conform-exceed drop/pipe \
action goto chain $(IS2 1 0)
}
cleanup()
{
ip link del $h1.200
ip link del $h1.100
tc qdisc del dev $swp1 clsact
ip link del br0
}
test_vlan_pop()
{
local h1_mac=$(mac_get $h1)
local h2_mac=$(mac_get $h2)
RET=0
tcpdump_start $h2
# Work around Mausezahn VLAN builder bug
# (https://github.com/netsniff-ng/netsniff-ng/issues/225) by using
# an 8021q upper
$MZ $h1.100 -q -c 1 -p 64 -a $h1_mac -b $h2_mac -t ip
sleep 1
tcpdump_stop $h2
tcpdump_show $h2 | grep -q "$h1_mac > $h2_mac, ethertype IPv4"
check_err "$?" "untagged reception"
tcpdump_cleanup $h2
log_test "VLAN pop"
}
test_vlan_push()
{
local h1_mac=$(mac_get $h1)
local h2_mac=$(mac_get $h2)
RET=0
tcpdump_start $h1.100
$MZ $h2 -q -c 1 -p 64 -a $h2_mac -b $h1_mac -t ip
sleep 1
tcpdump_stop $h1.100
tcpdump_show $h1.100 | grep -q "$h2_mac > $h1_mac"
check_err "$?" "tagged reception"
tcpdump_cleanup $h1.100
log_test "VLAN push"
}
test_vlan_ingress_modify()
{
local h1_mac=$(mac_get $h1)
local h2_mac=$(mac_get $h2)
RET=0
ip link set br0 type bridge vlan_filtering 1
bridge vlan add dev $swp1 vid 200
bridge vlan add dev $swp1 vid 300
bridge vlan add dev $swp2 vid 300
tc filter add dev $swp1 ingress chain $(IS1 2) pref 3 \
protocol 802.1Q flower skip_sw vlan_id 200 src_mac $h1_mac \
action vlan modify id 300 \
action goto chain $(IS2 0 0)
tcpdump_start $h2
$MZ $h1.200 -q -c 1 -p 64 -a $h1_mac -b $h2_mac -t ip
sleep 1
tcpdump_stop $h2
tcpdump_show $h2 | grep -q "$h1_mac > $h2_mac, .* vlan 300"
check_err "$?" "tagged reception"
tcpdump_cleanup $h2
tc filter del dev $swp1 ingress chain $(IS1 2) pref 3
bridge vlan del dev $swp1 vid 200
bridge vlan del dev $swp1 vid 300
bridge vlan del dev $swp2 vid 300
ip link set br0 type bridge vlan_filtering 0
log_test "Ingress VLAN modification"
}
test_vlan_egress_modify()
{
local h1_mac=$(mac_get $h1)
local h2_mac=$(mac_get $h2)
RET=0
tc qdisc add dev $swp2 clsact
ip link set br0 type bridge vlan_filtering 1
bridge vlan add dev $swp1 vid 200
bridge vlan add dev $swp2 vid 200
tc filter add dev $swp2 egress chain $(ES0) pref 3 \
protocol 802.1Q flower skip_sw vlan_id 200 vlan_prio 0 \
action vlan modify id 300 priority 7
tcpdump_start $h2
$MZ $h1.200 -q -c 1 -p 64 -a $h1_mac -b $h2_mac -t ip
sleep 1
tcpdump_stop $h2
tcpdump_show $h2 | grep -q "$h1_mac > $h2_mac, .* vlan 300"
check_err "$?" "tagged reception"
tcpdump_cleanup $h2
tc filter del dev $swp2 egress chain $(ES0) pref 3
tc qdisc del dev $swp2 clsact
bridge vlan del dev $swp1 vid 200
bridge vlan del dev $swp2 vid 200
ip link set br0 type bridge vlan_filtering 0
log_test "Egress VLAN modification"
}
test_skbedit_priority()
{
local h1_mac=$(mac_get $h1)
local h2_mac=$(mac_get $h2)
local num_pkts=100
before=$(ethtool_stats_get $swp1 'rx_green_prio_7')
$MZ $h1 -q -c $num_pkts -p 64 -a $h1_mac -b $h2_mac -t ip -A 10.1.1.2
after=$(ethtool_stats_get $swp1 'rx_green_prio_7')
if [ $((after - before)) = $num_pkts ]; then
RET=0
else
RET=1
fi
log_test "Frame prioritization"
}
trap cleanup EXIT
ALL_TESTS="
test_vlan_pop
test_vlan_push
test_vlan_ingress_modify
test_vlan_egress_modify
test_skbedit_priority
"
setup_prepare
setup_wait
tests_run
exit $EXIT_STATUS
Codebase Browser
linux