// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (c) 2021 Rockchip Electronics Co., Ltd.
* Copyright (c) 2024 Uwe Kleine-König
*/
/dts-v1/;
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/gpio/gpio.h>
#include "rk3568.dtsi"
/ {
model = "Qnap TS-433-4G NAS System 4-Bay";
compatible = "qnap,ts433", "rockchip,rk3568";
aliases {
ethernet0 = &gmac0;
mmc0 = &sdhci;
rtc0 = &rtc_rv8263;
};
chosen {
stdout-path = "serial2:115200n8";
};
keys {
compatible = "gpio-keys";
pinctrl-0 = <©_button_pin>, <&reset_button_pin>;
pinctrl-names = "default";
key-copy {
label = "copy";
gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_LOW>;
linux,code = <KEY_COPY>;
};
key-reset {
label = "reset";
gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
leds {
compatible = "gpio-leds";
led-0 {
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_DISK;
gpios = <&gpio1 RK_PD5 GPIO_ACTIVE_LOW>;
linux,default-trigger = "disk-activity";
pinctrl-names = "default";
pinctrl-0 = <&hdd1_led_pin>;
};
led-1 {
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_DISK;
gpios = <&gpio1 RK_PD6 GPIO_ACTIVE_LOW>;
linux,default-trigger = "disk-activity";
pinctrl-names = "default";
pinctrl-0 = <&hdd2_led_pin>;
};
led-2 {
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_DISK;
gpios = <&gpio1 RK_PD7 GPIO_ACTIVE_LOW>;
linux,default-trigger = "disk-activity";
pinctrl-names = "default";
pinctrl-0 = <&hdd3_led_pin>;
};
led-3 {
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_DISK;
gpios = <&gpio2 RK_PA0 GPIO_ACTIVE_LOW>;
linux,default-trigger = "disk-activity";
pinctrl-names = "default";
pinctrl-0 = <&hdd4_led_pin>;
};
};
dc_12v: regulator-dc-12v {
compatible = "regulator-fixed";
regulator-name = "dc_12v";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <12000000>;
regulator-max-microvolt = <12000000>;
};
vcc3v3_pcie: regulator-vcc3v3-pcie {
compatible = "regulator-fixed";
regulator-name = "vcc3v3_pcie";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
enable-active-high;
gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
vin-supply = <&dc_12v>;
};
vcc3v3_sys: regulator-vcc3v3-sys {
compatible = "regulator-fixed";
regulator-name = "vcc3v3_sys";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
vin-supply = <&dc_12v>;
};
vcc5v0_host: regulator-vcc5v0-host {
compatible = "regulator-fixed";
enable-active-high;
pinctrl-names = "default";
pinctrl-0 = <&vcc5v0_host_en>;
gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
regulator-name = "vcc5v0_host";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
vin-supply = <&vcc5v0_usb>;
};
vcc5v0_otg: regulator-vcc5v0-otg {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&vcc5v0_otg_en>;
regulator-name = "vcc5v0_otg";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
vin-supply = <&vcc5v0_usb>;
};
vcc5v0_sys: regulator-vcc5v0-sys {
compatible = "regulator-fixed";
regulator-name = "vcc5v0_sys";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
vin-supply = <&dc_12v>;
};
vcc5v0_usb: regulator-vcc5v0-usb {
compatible = "regulator-fixed";
regulator-name = "vcc5v0_usb";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
vin-supply = <&dc_12v>;
};
};
/* connected to usb_host0_xhci */
&combphy0 {
status = "okay";
};
/* connected to sata1 */
&combphy1 {
status = "okay";
};
/* connected to sata2 */
&combphy2 {
status = "okay";
};
&cpu0 {
cpu-supply = <&vdd_cpu>;
};
&cpu1 {
cpu-supply = <&vdd_cpu>;
};
&cpu2 {
cpu-supply = <&vdd_cpu>;
};
&cpu3 {
cpu-supply = <&vdd_cpu>;
};
&gmac0 {
assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>;
assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>, <&cru CLK_MAC0_2TOP>;
assigned-clock-rates = <0>, <125000000>;
clock_in_out = "output";
phy-handle = <&rgmii_phy0>;
phy-mode = "rgmii-id";
pinctrl-names = "default";
pinctrl-0 = <&gmac0_miim
&gmac0_tx_bus2
&gmac0_rx_bus2
&gmac0_rgmii_clk
&gmac0_rgmii_bus>;
status = "okay";
};
&gpu {
mali-supply = <&vdd_gpu>;
status = "okay";
};
&i2c0 {
status = "okay";
pmic@20 {
compatible = "rockchip,rk809";
reg = <0x20>;
interrupt-parent = <&gpio0>;
interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
#clock-cells = <1>;
pinctrl-names = "default";
pinctrl-0 = <&pmic_int_l>;
system-power-controller;
vcc1-supply = <&vcc3v3_sys>;
vcc2-supply = <&vcc3v3_sys>;
vcc3-supply = <&vcc3v3_sys>;
vcc4-supply = <&vcc3v3_sys>;
vcc5-supply = <&vcc3v3_sys>;
vcc6-supply = <&vcc3v3_sys>;
vcc7-supply = <&vcc3v3_sys>;
vcc8-supply = <&vcc3v3_sys>;
vcc9-supply = <&vcc3v3_sys>;
wakeup-source;
regulators {
vdd_logic: DCDC_REG1 {
regulator-name = "vdd_logic";
regulator-always-on;
regulator-boot-on;
regulator-initial-mode = <0x2>;
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1350000>;
regulator-ramp-delay = <6001>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdd_gpu: DCDC_REG2 {
regulator-name = "vdd_gpu";
regulator-always-on;
regulator-initial-mode = <0x2>;
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1350000>;
regulator-ramp-delay = <6001>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc_ddr: DCDC_REG3 {
regulator-name = "vcc_ddr";
regulator-always-on;
regulator-boot-on;
regulator-initial-mode = <0x2>;
regulator-state-mem {
regulator-on-in-suspend;
};
};
vdd_npu: DCDC_REG4 {
regulator-name = "vdd_npu";
regulator-initial-mode = <0x2>;
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1350000>;
regulator-ramp-delay = <6001>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc_1v8: DCDC_REG5 {
regulator-name = "vcc_1v8";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdda0v9_image: LDO_REG1 {
regulator-name = "vdda0v9_image";
regulator-always-on;
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <900000>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdda_0v9: LDO_REG2 {
regulator-name = "vdda_0v9";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <900000>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdda0v9_pmu: LDO_REG3 {
regulator-name = "vdda0v9_pmu";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <900000>;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <900000>;
};
};
vccio_acodec: LDO_REG4 {
regulator-name = "vccio_acodec";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vccio_sd: LDO_REG5 {
regulator-name = "vccio_sd";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc3v3_pmu: LDO_REG6 {
regulator-name = "vcc3v3_pmu";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <3300000>;
};
};
vcca_1v8: LDO_REG7 {
regulator-name = "vcca_1v8";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcca1v8_pmu: LDO_REG8 {
regulator-name = "vcca1v8_pmu";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1800000>;
};
};
vcca1v8_image: LDO_REG9 {
regulator-name = "vcca1v8_image";
regulator-always-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc_3v3: SWITCH_REG1 {
regulator-name = "vcc_3v3";
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc3v3_sd: SWITCH_REG2 {
regulator-name = "vcc3v3_sd";
/*
* turning this off, breaks access to both
* PCIe controllers, refclk generator perhaps
*/
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-off-in-suspend;
};
};
};
};
vdd_cpu: regulator@40 {
compatible = "silergy,syr827";
reg = <0x40>;
fcs,suspend-voltage-selector = <1>;
regulator-name = "vdd_cpu";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <712500>;
regulator-max-microvolt = <1390000>;
regulator-ramp-delay = <2300>;
vin-supply = <&vcc5v0_sys>;
};
};
&i2c1 {
status = "okay";
rtc_rv8263: rtc@51 {
compatible = "microcrystal,rv8263";
reg = <0x51>;
wakeup-source;
};
/* eeprom for vital-product-data on the mainboard */
eeprom@54 {
compatible = "giantec,gt24c04a", "atmel,24c04";
reg = <0x54>;
label = "VPD_MB";
num-addresses = <2>;
pagesize = <16>;
read-only;
};
/* eeprom for vital-product-data on the backplane */
eeprom@56 {
compatible = "giantec,gt24c04a", "atmel,24c04";
reg = <0x56>;
label = "VPD_BP";
num-addresses = <2>;
pagesize = <16>;
read-only;
};
};
&mdio0 {
rgmii_phy0: ethernet-phy@0 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <0x0>;
};
};
&pcie30phy {
data-lanes = <1 2>;
status = "okay";
};
/* Connected to a JMicron AHCI SATA controller */
&pcie3x1 {
reset-gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>;
vpcie3v3-supply = <&vcc3v3_pcie>;
status = "okay";
};
/* Connected to the 2.5G NIC for the upper network jack */
&pcie3x2 {
num-lanes = <1>;
reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
vpcie3v3-supply = <&vcc3v3_pcie>;
status = "okay";
};
&pinctrl {
keys {
copy_button_pin: copy-button-pin {
rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>;
};
reset_button_pin: reset-button-pin {
rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
leds {
hdd1_led_pin: hdd1-led-pin {
rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up>;
};
hdd2_led_pin: hdd2-led-pin {
rockchip,pins = <1 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>;
};
hdd3_led_pin: hdd3-led-pin {
rockchip,pins = <1 RK_PD7 RK_FUNC_GPIO &pcfg_pull_up>;
};
hdd4_led_pin: hdd4_led-pin {
rockchip,pins = <2 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
pmic {
pmic_int_l: pmic-int-l {
rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
usb {
vcc5v0_host_en: vcc5v0-host-en {
rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
};
vcc5v0_otg_en: vcc5v0-otg-en {
rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
};
&pmu_io_domains {
vccio4-supply = <&vcc_1v8>;
vccio6-supply = <&vcc_1v8>;
status = "okay";
};
&sata1 {
status = "okay";
};
&sata2 {
status = "okay";
};
&sdhci {
bus-width = <8>;
max-frequency = <200000000>;
non-removable;
status = "okay";
};
&tsadc {
rockchip,hw-tshut-mode = <1>;
rockchip,hw-tshut-polarity = <0>;
status = "okay";
};
/*
* Connected to an MCU, that provides access to more LEDs,
* buzzer, fan control and more.
*/
&uart0 {
status = "okay";
};
/*
* Pins available on CN3 connector at TTL voltage level (3V3).
* ,_ _.
* |1234| 1=TX 2=VCC
* `----' 3=RX 4=GND
*/
&uart2 {
status = "okay";
};
&usb2phy0 {
status = "okay";
};
/* connected to usb_host0_xhci */
&usb2phy0_otg {
phy-supply = <&vcc5v0_otg>;
status = "okay";
};
&usb2phy1 {
status = "okay";
};
/* connected to usb_host1_ehci/ohci */
&usb2phy1_host {
phy-supply = <&vcc5v0_host>;
status = "okay";
};
/* connected to usb_host0_ehci/ohci */
&usb2phy1_otg {
phy-supply = <&vcc5v0_host>;
status = "okay";
};
/* right port backside */
&usb_host0_ehci {
status = "okay";
};
&usb_host0_ohci {
status = "okay";
};
/* front port */
&usb_host0_xhci {
dr_mode = "host";
status = "okay";
};
/* left port backside */
&usb_host1_ehci {
status = "okay";
};
&usb_host1_ohci {
status = "okay";
};
Codebase Browser
linux