// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
/*
* Copyright (c) 2023 - 2024, Dang Huynh <[email protected]>
*/
/dts-v1/;
#include "sm6115.dtsi"
#include "pm6125.dtsi"
#include "pmi632.dtsi"
#include <dt-bindings/arm/qcom,ids.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/usb/pd.h>
/ {
model = "F(x)tec Pro1X (QX1050)";
compatible = "fxtec,pro1x", "qcom,sm6115";
chassis-type = "handset";
qcom,msm-id = <QCOM_ID_SM6115 0x10000>;
chosen {
#address-cells = <2>;
#size-cells = <2>;
ranges;
framebuffer0: framebuffer@5c000000 {
compatible = "simple-framebuffer";
reg = <0x0 0x5c000000 0x0 (1080 * 2160 * 4)>;
width = <1080>;
height = <2160>;
stride = <(1080 * 4)>;
format = "a8r8g8b8";
clocks = <&gcc GCC_DISP_HF_AXI_CLK>;
};
};
disp_elvdd_supply: disp-elvdd-supply {
compatible = "regulator-fixed";
regulator-name = "disp_elvdd_supply";
};
disp_elvss_supply: disp-elvss-supply {
compatible = "regulator-fixed";
regulator-name = "disp_elvss_supply";
};
disp_vcc_supply: disp-vcc-supply {
compatible = "regulator-fixed";
regulator-name = "disp_vcc_supply";
};
disp_vci_supply: disp-vci-supply {
compatible = "regulator-fixed";
regulator-name = "disp_vci_supply";
};
gpio-keys {
compatible = "gpio-keys";
pinctrl-0 = <&hall_sensor_n>, <&key_camera_n>, <&vol_up_n>;
pinctrl-names = "default";
hall-switch {
label = "Hall Switch";
linux,input-type = <EV_SW>;
linux,code = <SW_KEYPAD_SLIDE>;
gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
debounce-interval = <90>;
wakeup-source;
};
key-camera {
label = "Camera Button";
linux,code = <KEY_CAMERA>;
gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
debounce-interval = <15>;
};
key-volume-up {
label = "Volume Up";
linux,code = <KEY_VOLUMEUP>;
gpios = <&pm6125_gpios 5 GPIO_ACTIVE_LOW>;
debounce-interval = <15>;
linux,can-disable;
wakeup-source;
};
};
gpio-leds {
compatible = "gpio-leds";
capslock-led {
label = "green:capslock";
function = LED_FUNCTION_CAPSLOCK;
color = <LED_COLOR_ID_GREEN>;
gpios = <&pca9534 1 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "kbd-capslock";
default-state = "off";
};
};
ts_vdd_supply: ts-vdd-supply {
compatible = "regulator-fixed";
regulator-name = "ts_vdd_supply";
gpio = <&pca9534 3 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
ts_vddio_supply: ts-vddio-supply {
compatible = "regulator-fixed";
regulator-name = "ts_vddio_supply";
gpio = <&pca9534 2 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
&gpi_dma0 {
status = "okay";
};
&gpu {
status = "okay";
zap-shader {
firmware-name = "qcom/sm6115/Fxtec/QX1050/a610_zap.mbn";
};
};
&i2c1 {
clock-frequency = <100000>;
status = "okay";
pca9534: gpio@21 {
compatible = "nxp,pca9534";
reg = <0x21>;
gpio-controller;
#gpio-cells = <2>;
};
};
&i2c2 {
status = "okay";
/* Clock frequency was not specified downstream, let's park it to 100 KHz */
clock-frequency = <100000>;
touchscreen@14 {
compatible = "goodix,gt9286";
reg = <0x14>;
interrupts-extended = <&tlmm 80 IRQ_TYPE_LEVEL_LOW>;
irq-gpios = <&tlmm 80 IRQ_TYPE_LEVEL_LOW>;
reset-gpios = <&tlmm 71 GPIO_ACTIVE_HIGH>;
AVDD28-supply = <&ts_vdd_supply>;
VDDIO-supply = <&ts_vddio_supply>;
pinctrl-0 = <&ts_int_n>, <&ts_rst_n>;
pinctrl-names = "default";
};
};
&mdss {
status = "okay";
};
&mdss_dsi0 {
vdda-supply = <&pm6125_l18a>;
status = "okay";
panel: panel@0 {
compatible = "boe,bf060y8m-aj0";
reg = <0>;
reset-gpios = <&tlmm 82 GPIO_ACTIVE_LOW>;
elvdd-supply = <&disp_elvdd_supply>;
elvss-supply = <&disp_elvss_supply>;
vcc-supply = <&disp_vcc_supply>;
vci-supply = <&disp_vci_supply>;
vddio-supply = <&pm6125_l9a>;
pinctrl-0 = <&mdss_dsi_n &panel_en_n>;
pinctrl-names = "default";
port {
panel_in: endpoint {
remote-endpoint = <&mdss_dsi0_out>;
};
};
};
};
&mdss_dsi0_out {
data-lanes = <0 1 2 3>;
remote-endpoint = <&panel_in>;
};
&mdss_dsi0_phy {
status = "okay";
};
&pm6125_gpios {
vol_up_n: vol-up-n-state {
pins = "gpio5";
function = "normal";
power-source = <0>;
bias-pull-up;
input-enable;
};
};
&pmi632_lpg {
status = "okay";
multi-led {
color = <LED_COLOR_ID_RGB>;
function = LED_FUNCTION_STATUS;
#address-cells = <1>;
#size-cells = <0>;
led@1 {
reg = <1>;
color = <LED_COLOR_ID_RED>;
};
led@2 {
reg = <2>;
color = <LED_COLOR_ID_GREEN>;
};
led@3 {
reg = <3>;
color = <LED_COLOR_ID_BLUE>;
};
};
};
&pmi632_typec {
status = "okay";
connector {
compatible = "usb-c-connector";
power-role = "dual";
data-role = "dual";
self-powered;
typec-power-opmode = "default";
pd-disable;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
pmi632_hs_in: endpoint {
remote-endpoint = <&usb_dwc3_hs>;
};
};
port@1 {
reg = <1>;
pmi632_ss_in: endpoint {
remote-endpoint = <&usb_qmpphy_out>;
};
};
};
};
};
&pmi632_vbus {
regulator-min-microamp = <500000>;
regulator-max-microamp = <1000000>;
status = "okay";
};
&pon_pwrkey {
status = "okay";
};
&pon_resin {
linux,code = <KEY_VOLUMEDOWN>;
status = "okay";
};
&qupv3_id_0 {
status = "okay";
};
&remoteproc_adsp {
firmware-name = "qcom/sm6115/Fxtec/QX1050/adsp.mbn";
status = "okay";
};
&remoteproc_cdsp {
firmware-name = "qcom/sm6115/Fxtec/QX1050/cdsp.mbn";
status = "okay";
};
&remoteproc_mpss {
firmware-name = "qcom/sm6115/Fxtec/QX1050/modem.mbn";
status = "okay";
};
&rpm_requests {
regulators-0 {
compatible = "qcom,rpm-pm6125-regulators";
pm6125_s6a: s6 {
regulator-min-microvolt = <304000>;
regulator-max-microvolt = <1456000>;
};
pm6125_s7a: s7 {
regulator-min-microvolt = <1280000>;
regulator-max-microvolt = <2040000>;
};
pm6125_s8a: s8 {
regulator-min-microvolt = <1064000>;
regulator-max-microvolt = <1304000>;
};
pm6125_l1a: l1 {
regulator-min-microvolt = <952000>;
regulator-max-microvolt = <1152000>;
};
pm6125_l4a: l4 {
regulator-min-microvolt = <488000>;
regulator-max-microvolt = <1000000>;
};
pm6125_l5a: l5 {
regulator-min-microvolt = <1648000>;
regulator-max-microvolt = <3056000>;
regulator-allow-set-load;
};
pm6125_l6a: l6 {
regulator-min-microvolt = <576000>;
regulator-max-microvolt = <656000>;
};
pm6125_l7a: l7 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1304000>;
};
pm6125_l8a: l8 {
regulator-min-microvolt = <400000>;
regulator-max-microvolt = <728000>;
};
pm6125_l9a: l9 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2000000>;
};
pm6125_l10a: l10 {
regulator-min-microvolt = <1704000>;
regulator-max-microvolt = <1904000>;
};
pm6125_l11a: l11 {
regulator-min-microvolt = <1704000>;
regulator-max-microvolt = <1952000>;
regulator-allow-set-load;
};
pm6125_l12a: l12 {
regulator-min-microvolt = <1624000>;
regulator-max-microvolt = <1984000>;
};
pm6125_l13a: l13 {
regulator-min-microvolt = <1504000>;
regulator-max-microvolt = <1952000>;
};
pm6125_l14a: l14 {
regulator-min-microvolt = <1704000>;
regulator-max-microvolt = <1904000>;
};
pm6125_l15a: l15 {
regulator-min-microvolt = <2920000>;
regulator-max-microvolt = <3232000>;
};
pm6125_l16a: l16 {
regulator-min-microvolt = <1704000>;
regulator-max-microvolt = <1904000>;
};
pm6125_l17a: l17 {
regulator-min-microvolt = <1152000>;
regulator-max-microvolt = <1384000>;
};
pm6125_l18a: l18 {
regulator-min-microvolt = <1104000>;
regulator-max-microvolt = <1312000>;
};
pm6125_l19a: l19 {
regulator-min-microvolt = <1624000>;
regulator-max-microvolt = <3304000>;
};
pm6125_l20a: l20 {
regulator-min-microvolt = <1624000>;
regulator-max-microvolt = <3304000>;
};
pm6125_l21a: l21 {
regulator-min-microvolt = <2400000>;
regulator-max-microvolt = <3600000>;
};
pm6125_l22a: l22 {
regulator-min-microvolt = <2952000>;
regulator-max-microvolt = <3304000>;
};
pm6125_l23a: l23 {
regulator-min-microvolt = <3200000>;
regulator-max-microvolt = <3400000>;
};
pm6125_l24a: l24 {
regulator-min-microvolt = <2704000>;
regulator-max-microvolt = <3600000>;
regulator-allow-set-load;
};
};
};
&sdc2_state_off {
cd-pins {
pins = "gpio88";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
};
&sdc2_state_on {
cd-pins {
pins = "gpio88";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
&sdhc_2 {
pinctrl-0 = <&sdc2_state_on>;
pinctrl-1 = <&sdc2_state_off>;
pinctrl-names = "default", "sleep";
cd-gpios = <&tlmm 88 GPIO_ACTIVE_LOW>;
vmmc-supply = <&pm6125_l22a>;
vqmmc-supply = <&pm6125_l5a>;
status = "okay";
};
&sleep_clk {
clock-frequency = <32764>;
};
&tlmm {
gpio-reserved-ranges = <0 4>, <14 4>;
key_camera_n: key-camera-n-state {
pins = "gpio18";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
panel_en_n: panel-en-n-state {
pins = "gpio65";
function = "gpio";
bias-disable;
};
ts_rst_n: ts-rst-n-state {
pins = "gpio71";
function = "gpio";
drive-strength = <8>;
bias-pull-up;
};
ts_int_n: ts-int-n-state {
pins = "gpio80";
function = "gpio";
drive-strength = <8>;
bias-pull-up;
};
mdss_dsi_n: mdss-dsi-n-state {
pins = "gpio82";
function = "gpio";
drive-strength = <8>;
bias-disable;
};
hall_sensor_n: hall-sensor-n-state {
pins = "gpio96";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
&ufs_mem_hc {
vcc-supply = <&pm6125_l24a>;
vcc-max-microamp = <600000>;
vccq2-supply = <&pm6125_l11a>;
vccq2-max-microamp = <600000>;
vdd-hba-supply = <&pm6125_l18a>;
status = "okay";
};
&ufs_mem_phy {
vdda-phy-supply = <&pm6125_l4a>;
vdda-pll-supply = <&pm6125_l12a>;
status = "okay";
};
&usb {
status = "okay";
};
&usb_dwc3_hs {
remote-endpoint = <&pmi632_hs_in>;
};
&usb_hsphy {
vdd-supply = <&pm6125_l4a>;
vdda-pll-supply = <&pm6125_l12a>;
vdda-phy-dpdm-supply = <&pm6125_l15a>;
status = "okay";
};
&usb_qmpphy {
vdda-phy-supply = <&pm6125_l4a>;
vdda-pll-supply = <&pm6125_l12a>;
status = "okay";
};
&usb_qmpphy_out {
remote-endpoint = <&pmi632_ss_in>;
};
&wifi {
vdd-0.8-cx-mx-supply = <&pm6125_l8a>;
vdd-1.8-xo-supply = <&pm6125_l16a>;
vdd-1.3-rfa-supply = <&pm6125_l17a>;
vdd-3.3-ch0-supply = <&pm6125_l23a>;
qcom,ath10k-calibration-variant = "Fxtec_QX1050";
status = "okay";
};
&xo_board {
clock-frequency = <19200000>;
};
Codebase Browser
linux