# SPDX-License-Identifier: GPL-2.0-only
#
# AMD network device configuration
#
config NET_VENDOR_AMD
bool "AMD devices"
default y
depends on DIO || MACH_DECSTATION || MVME147 || ATARI || SUN3 || \
SUN3X || SBUS || PCI || ZORRO || (ISA && ISA_DMA_API) || \
ISA || EISA || PCMCIA || ARM64
help
If you have a network (Ethernet) chipset belonging to this class,
say Y.
Note that the answer to this question does not directly affect
the kernel: saying N will just cause the configurator to skip all
the questions regarding AMD chipsets. If you say Y, you will be asked
for your specific chipset/driver in the following questions.
if NET_VENDOR_AMD
config A2065
tristate "A2065 support"
depends on ZORRO
select CRC32
help
If you have a Commodore A2065 Ethernet adapter, say Y. Otherwise,
say N.
To compile this driver as a module, choose M here: the module
will be called a2065.
config AMD8111_ETH
tristate "AMD 8111 (new PCI LANCE) support"
depends on PCI
select CRC32
select MII
help
If you have an AMD 8111-based PCI LANCE ethernet card,
answer Y here.
To compile this driver as a module, choose M here. The module
will be called amd8111e.
config LANCE
tristate "AMD LANCE and PCnet (AT1500 and NE2100) support"
depends on ISA && ISA_DMA_API && !ARM && !PPC32
select NETDEV_LEGACY_INIT
help
If you have a network (Ethernet) card of this type, say Y here.
Some LinkSys cards are of this type.
To compile this driver as a module, choose M here: the module
will be called lance. This is recommended.
config PCNET32
tristate "AMD PCnet32 PCI support"
depends on PCI && HAS_IOPORT
select CRC32
select MII
help
If you have a PCnet32 or PCnetPCI based network (Ethernet) card,
answer Y here.
To compile this driver as a module, choose M here. The module
will be called pcnet32.
config ARIADNE
tristate "Ariadne support"
depends on ZORRO
help
If you have a Village Tronic Ariadne Ethernet adapter, say Y.
Otherwise, say N.
To compile this driver as a module, choose M here: the module
will be called ariadne.
config ATARILANCE
tristate "Atari LANCE support"
depends on ATARI
help
Say Y to include support for several Atari Ethernet adapters based
on the AMD LANCE chipset: RieblCard (with or without battery), or
PAMCard VME (also the version by Rhotron, with different addresses).
config DECLANCE
tristate "DEC LANCE ethernet controller support"
depends on MACH_DECSTATION
select CRC32
help
This driver is for the series of Ethernet controllers produced by
DEC (now Compaq) based on the AMD LANCE chipset, including the
DEPCA series. (This chipset is better known via the NE2100 cards.)
config HPLANCE
tristate "HP on-board LANCE support"
depends on DIO
select CRC32
help
If you want to use the builtin "LANCE" Ethernet controller on an
HP300 machine, say Y here.
config MIPS_AU1X00_ENET
tristate "MIPS AU1000 Ethernet support"
depends on MIPS_ALCHEMY
select PHYLIB
select CRC32
help
If you have an Alchemy Semi AU1X00 based system
say Y. Otherwise, say N.
config MVME147_NET
tristate "MVME147 (LANCE) Ethernet support"
depends on MVME147
select CRC32
help
Support for the on-board Ethernet interface on the Motorola MVME147
single-board computer. Say Y here to include the
driver for this chip in your kernel.
To compile this driver as a module, choose M here.
config PCMCIA_NMCLAN
tristate "New Media PCMCIA support"
depends on PCMCIA && HAS_IOPORT
help
Say Y here if you intend to attach a New Media Ethernet or LiveWire
PCMCIA (PC-card) Ethernet card to your computer.
To compile this driver as a module, choose M here: the module will be
called nmclan_cs. If unsure, say N.
config SUN3LANCE
tristate "Sun3/Sun3x on-board LANCE support"
depends on (SUN3 || SUN3X)
help
Most Sun3 and Sun3x motherboards (including the 3/50, 3/60 and 3/80)
featured an AMD LANCE 10Mbit Ethernet controller on board; say Y
here to compile in the Linux driver for this and enable Ethernet.
General Linux information on the Sun 3 and 3x series (now
discontinued) is at
<http://www.angelfire.com/ca2/tech68k/sun3.html>.
If you're not building a kernel for a Sun 3, say N.
config SUNLANCE
tristate "Sun LANCE support"
depends on SBUS
select CRC32
help
This driver supports the "le" interface present on all 32-bit Sparc
systems, on some older Ultra systems and as an Sbus option. These
cards are based on the AMD LANCE chipset, which is better known
via the NE2100 cards.
To compile this driver as a module, choose M here: the module
will be called sunlance.
config AMD_XGBE
tristate "AMD 10GbE Ethernet driver"
depends on (OF_ADDRESS || ACPI || PCI) && HAS_IOMEM
depends on X86 || ARM64 || COMPILE_TEST
depends on PTP_1588_CLOCK_OPTIONAL
select BITREVERSE
select CRC32
select PHYLIB
select AMD_XGBE_HAVE_ECC if X86
help
This driver supports the AMD 10GbE Ethernet device found on an
AMD SoC.
To compile this driver as a module, choose M here: the module
will be called amd-xgbe.
config AMD_XGBE_DCB
bool "Data Center Bridging (DCB) support"
default n
depends on AMD_XGBE && DCB
help
Say Y here to enable Data Center Bridging (DCB) support in the
driver.
If unsure, say N.
config AMD_XGBE_HAVE_ECC
bool
default n
config PDS_CORE
tristate "AMD/Pensando Data Systems Core Device Support"
depends on 64BIT && PCI
select AUXILIARY_BUS
select NET_DEVLINK
help
This enables the support for the AMD/Pensando Core device family of
adapters. More specific information on this driver can be
found in
<file:Documentation/networking/device_drivers/ethernet/amd/pds_core.rst>.
To compile this driver as a module, choose M here. The module
will be called pds_core.
endif # NET_VENDOR_AMD
Codebase Browser
linux