# SPDX-License-Identifier: GPL-2.0-only
#
# Phy drivers for Qualcomm and Atheros platforms
#
config PHY_ATH79_USB
tristate "Atheros AR71XX/9XXX USB PHY driver"
depends on OF && (ATH79 || COMPILE_TEST)
default y if USB_EHCI_HCD_PLATFORM || USB_OHCI_HCD_PLATFORM
select RESET_CONTROLLER
select GENERIC_PHY
help
Enable this to support the USB PHY on Atheros AR71XX/9XXX SoCs.
config PHY_QCOM_APQ8064_SATA
tristate "Qualcomm APQ8064 SATA SerDes/PHY driver"
depends on ARCH_QCOM
depends on HAS_IOMEM
depends on OF
select GENERIC_PHY
config PHY_QCOM_EDP
tristate "Qualcomm eDP PHY driver"
depends on ARCH_QCOM || COMPILE_TEST
depends on OF
depends on COMMON_CLK
select GENERIC_PHY
help
Enable this driver to support the Qualcomm eDP PHY found in various
Qualcomm chipsets.
config PHY_QCOM_IPQ4019_USB
tristate "Qualcomm IPQ4019 USB PHY driver"
depends on OF && (ARCH_QCOM || COMPILE_TEST)
select GENERIC_PHY
help
Support for the USB PHY-s on Qualcomm IPQ40xx SoC-s.
config PHY_QCOM_IPQ806X_SATA
tristate "Qualcomm IPQ806x SATA SerDes/PHY driver"
depends on ARCH_QCOM
depends on HAS_IOMEM
depends on OF
select GENERIC_PHY
config PHY_QCOM_PCIE2
tristate "Qualcomm PCIe Gen2 PHY Driver"
depends on OF && COMMON_CLK && (ARCH_QCOM || COMPILE_TEST)
select GENERIC_PHY
help
Enable this to support the Qualcomm PCIe PHY, used with the Synopsys
based PCIe controller.
menuconfig PHY_QCOM_QMP
tristate "Qualcomm QMP PHY Drivers"
depends on OF && COMMON_CLK && (ARCH_QCOM || COMPILE_TEST)
if PHY_QCOM_QMP
config PHY_QCOM_QMP_COMBO
tristate "Qualcomm QMP Combo PHY Driver"
default PHY_QCOM_QMP
depends on TYPEC || TYPEC=n
depends on DRM || DRM=n
select GENERIC_PHY
select MFD_SYSCON
select DRM_AUX_BRIDGE if DRM_BRIDGE
help
Enable this to support the QMP Combo PHY transceiver that is used
with USB3 and DisplayPort controllers on Qualcomm chips.
config PHY_QCOM_QMP_PCIE
tristate "Qualcomm QMP PCIe PHY Driver"
depends on PCI || COMPILE_TEST
select GENERIC_PHY
default PHY_QCOM_QMP
help
Enable this to support the QMP PCIe PHY transceiver that is used
with PCIe controllers on Qualcomm chips.
config PHY_QCOM_QMP_PCIE_8996
tristate "Qualcomm QMP PCIe 8996 PHY Driver"
depends on PCI || COMPILE_TEST
select GENERIC_PHY
default PHY_QCOM_QMP
help
Enable this to support the QMP PCIe PHY transceiver that is used
with PCIe controllers on Qualcomm msm8996 chips.
config PHY_QCOM_QMP_UFS
tristate "Qualcomm QMP UFS PHY Driver"
select GENERIC_PHY
default PHY_QCOM_QMP
help
Enable this to support the QMP UFS PHY transceiver that is used
with UFS controllers on Qualcomm chips.
config PHY_QCOM_QMP_USB
tristate "Qualcomm QMP USB PHY Driver"
select GENERIC_PHY
default PHY_QCOM_QMP
help
Enable this to support the QMP USB PHY transceiver that is used
with USB3 controllers on Qualcomm chips.
config PHY_QCOM_QMP_USB_LEGACY
tristate "Qualcomm QMP legacy USB PHY Driver"
select GENERIC_PHY
default n
help
Enable this legacy driver to support the QMP USB+DisplayPort Combo
PHY transceivers working only in USB3 mode on Qualcomm chips. This
driver exists only for compatibility with older device trees,
existing users have been migrated to PHY_QCOM_QMP_COMBO driver.
endif # PHY_QCOM_QMP
config PHY_QCOM_QUSB2
tristate "Qualcomm QUSB2 PHY Driver"
depends on OF && (ARCH_QCOM || COMPILE_TEST)
depends on NVMEM || !NVMEM
select GENERIC_PHY
help
Enable this to support the HighSpeed QUSB2 PHY transceiver for USB
controllers on Qualcomm chips. This driver supports the high-speed
PHY which is usually paired with either the ChipIdea or Synopsys DWC3
USB IPs on MSM SOCs.
config PHY_QCOM_SNPS_EUSB2
tristate "Qualcomm SNPS eUSB2 PHY Driver"
depends on OF && (ARCH_QCOM || COMPILE_TEST)
select GENERIC_PHY
help
Enable support for the USB high-speed SNPS eUSB2 phy on Qualcomm
chipsets. The PHY is paired with a Synopsys DWC3 USB controller
on Qualcomm SOCs.
config PHY_QCOM_EUSB2_REPEATER
tristate "Qualcomm SNPS eUSB2 Repeater Driver"
depends on OF && (ARCH_QCOM || COMPILE_TEST)
select GENERIC_PHY
help
Enable support for the USB high-speed SNPS eUSB2 repeater on Qualcomm
PMICs. The repeater is paired with a Synopsys eUSB2 Phy
on Qualcomm SOCs.
config PHY_QCOM_M31_USB
tristate "Qualcomm M31 HS PHY driver support"
depends on USB && (ARCH_QCOM || COMPILE_TEST)
select GENERIC_PHY
help
Enable this to support M31 HS PHY transceivers on Qualcomm chips
with DWC3 USB core. It handles PHY initialization, clock
management required after resetting the hardware and power
management. This driver is required even for peripheral only or
host only mode configurations.
config PHY_QCOM_USB_HS
tristate "Qualcomm USB HS PHY module"
depends on USB_ULPI_BUS
depends on EXTCON || !EXTCON # if EXTCON=m, this cannot be built-in
select GENERIC_PHY
help
Support for the USB high-speed ULPI compliant phy on Qualcomm
chipsets.
config PHY_QCOM_USB_SNPS_FEMTO_V2
tristate "Qualcomm SNPS FEMTO USB HS PHY V2 module"
depends on OF && (ARCH_QCOM || COMPILE_TEST)
select GENERIC_PHY
help
Enable support for the USB high-speed SNPS Femto phy on Qualcomm
chipsets. This PHY has differences in the register map compared
to the V1 variants. The PHY is paired with a Synopsys DWC3 USB
controller on Qualcomm SOCs.
config PHY_QCOM_USB_HSIC
tristate "Qualcomm USB HSIC ULPI PHY module"
depends on USB_ULPI_BUS
select GENERIC_PHY
help
Support for the USB HSIC ULPI compliant PHY on QCOM chipsets.
config PHY_QCOM_USB_HS_28NM
tristate "Qualcomm 28nm High-Speed PHY"
depends on OF && (ARCH_QCOM || COMPILE_TEST)
depends on EXTCON || !EXTCON # if EXTCON=m, this cannot be built-in
select GENERIC_PHY
help
Enable this to support the Qualcomm Synopsys DesignWare Core 28nm
High-Speed PHY driver. This driver supports the Hi-Speed PHY which
is usually paired with either the ChipIdea or Synopsys DWC3 USB
IPs on MSM SOCs.
config PHY_QCOM_USB_SS
tristate "Qualcomm USB Super-Speed PHY driver"
depends on OF && (ARCH_QCOM || COMPILE_TEST)
depends on EXTCON || !EXTCON # if EXTCON=m, this cannot be built-in
select GENERIC_PHY
help
Enable this to support the Super-Speed USB transceiver on various
Qualcomm chipsets.
config PHY_QCOM_IPQ806X_USB
tristate "Qualcomm IPQ806x DWC3 USB PHY driver"
depends on HAS_IOMEM
depends on OF && (ARCH_QCOM || COMPILE_TEST)
select GENERIC_PHY
help
This option enables support for the Synopsis PHYs present inside the
Qualcomm USB3.0 DWC3 controller on ipq806x SoC. This driver supports
both HS and SS PHY controllers.
config PHY_QCOM_SGMII_ETH
tristate "Qualcomm DWMAC SGMII SerDes/PHY driver"
depends on OF && (ARCH_QCOM || COMPILE_TEST)
depends on HAS_IOMEM
select GENERIC_PHY
help
Enable this to support the internal SerDes/SGMII PHY on various
Qualcomm chipsets.
Codebase Browser
linux