// SPDX-License-Identifier: GPL-2.0+
/*
* drivers/usb/musb/ux500_dma.c
*
* U8500 DMA support code
*
* Copyright (C) 2009 STMicroelectronics
* Copyright (C) 2011 ST-Ericsson SA
* Authors:
* Mian Yousaf Kaukab <[email protected]>
* Praveena Nadahally <[email protected]>
* Rajaram Regupathy <[email protected]>
*/
#include <linux/device.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/dmaengine.h>
#include <linux/pfn.h>
#include <linux/sizes.h>
#include <linux/platform_data/usb-musb-ux500.h>
#include "musb_core.h"
static const char *iep_chan_names[] = { "iep_1_9", "iep_2_10", "iep_3_11", "iep_4_12",
"iep_5_13", "iep_6_14", "iep_7_15", "iep_8" };
static const char *oep_chan_names[] = { "oep_1_9", "oep_2_10", "oep_3_11", "oep_4_12",
"oep_5_13", "oep_6_14", "oep_7_15", "oep_8" };
struct ux500_dma_channel {
struct dma_channel channel;
struct ux500_dma_controller *controller;
struct musb_hw_ep *hw_ep;
struct dma_chan *dma_chan;
unsigned int cur_len;
dma_cookie_t cookie;
u8 ch_num;
u8 is_tx;
u8 is_allocated;
};
struct ux500_dma_controller {
struct dma_controller controller;
struct ux500_dma_channel rx_channel[UX500_MUSB_DMA_NUM_RX_TX_CHANNELS];
struct ux500_dma_channel tx_channel[UX500_MUSB_DMA_NUM_RX_TX_CHANNELS];
void *private_data;
dma_addr_t phy_base;
};
/* Work function invoked from DMA callback to handle rx transfers. */
static void ux500_dma_callback(void *private_data)
{
struct dma_channel *channel = private_data;
struct ux500_dma_channel *ux500_channel = channel->private_data;
struct musb_hw_ep *hw_ep = ux500_channel->hw_ep;
struct musb *musb = hw_ep->musb;
unsigned long flags;
dev_dbg(musb->controller, "DMA rx transfer done on hw_ep=%d\n",
hw_ep->epnum);
spin_lock_irqsave(&musb->lock, flags);
ux500_channel->channel.actual_len = ux500_channel->cur_len;
ux500_channel->channel.status = MUSB_DMA_STATUS_FREE;
musb_dma_completion(musb, hw_ep->epnum, ux500_channel->is_tx);
spin_unlock_irqrestore(&musb->lock, flags);
}
static bool ux500_configure_channel(struct dma_channel *channel,
u16 packet_sz, u8 mode,
dma_addr_t dma_addr, u32 len)
{
struct ux500_dma_channel *ux500_channel = channel->private_data;
struct musb_hw_ep *hw_ep = ux500_channel->hw_ep;
struct dma_chan *dma_chan = ux500_channel->dma_chan;
struct dma_async_tx_descriptor *dma_desc;
enum dma_transfer_direction direction;
struct scatterlist sg;
struct dma_slave_config slave_conf;
enum dma_slave_buswidth addr_width;
struct musb *musb = ux500_channel->controller->private_data;
dma_addr_t usb_fifo_addr = (musb->io.fifo_offset(hw_ep->epnum) +
ux500_channel->controller->phy_base);
dev_dbg(musb->controller,
"packet_sz=%d, mode=%d, dma_addr=0x%llx, len=%d is_tx=%d\n",
packet_sz, mode, (unsigned long long) dma_addr,
len, ux500_channel->is_tx);
ux500_channel->cur_len = len;
sg_init_table(&sg, 1);
sg_set_page(&sg, pfn_to_page(PFN_DOWN(dma_addr)), len,
offset_in_page(dma_addr));
sg_dma_address(&sg) = dma_addr;
sg_dma_len(&sg) = len;
direction = ux500_channel->is_tx ? DMA_MEM_TO_DEV : DMA_DEV_TO_MEM;
addr_width = (len & 0x3) ? DMA_SLAVE_BUSWIDTH_1_BYTE :
DMA_SLAVE_BUSWIDTH_4_BYTES;
slave_conf.direction = direction;
slave_conf.src_addr = usb_fifo_addr;
slave_conf.src_addr_width = addr_width;
slave_conf.src_maxburst = 16;
slave_conf.dst_addr = usb_fifo_addr;
slave_conf.dst_addr_width = addr_width;
slave_conf.dst_maxburst = 16;
slave_conf.device_fc = false;
dmaengine_slave_config(dma_chan, &slave_conf);
dma_desc = dmaengine_prep_slave_sg(dma_chan, &sg, 1, direction,
DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
if (!dma_desc)
return false;
dma_desc->callback = ux500_dma_callback;
dma_desc->callback_param = channel;
ux500_channel->cookie = dma_desc->tx_submit(dma_desc);
dma_async_issue_pending(dma_chan);
return true;
}
static struct dma_channel *ux500_dma_channel_allocate(struct dma_controller *c,
struct musb_hw_ep *hw_ep, u8 is_tx)
{
struct ux500_dma_controller *controller = container_of(c,
struct ux500_dma_controller, controller);
struct ux500_dma_channel *ux500_channel = NULL;
struct musb *musb = controller->private_data;
u8 ch_num = hw_ep->epnum - 1;
/* 8 DMA channels (0 - 7). Each DMA channel can only be allocated
* to specified hw_ep. For example DMA channel 0 can only be allocated
* to hw_ep 1 and 9.
*/
if (ch_num > 7)
ch_num -= 8;
if (ch_num >= UX500_MUSB_DMA_NUM_RX_TX_CHANNELS)
return NULL;
ux500_channel = is_tx ? &(controller->tx_channel[ch_num]) :
&(controller->rx_channel[ch_num]) ;
/* Check if channel is already used. */
if (ux500_channel->is_allocated)
return NULL;
ux500_channel->hw_ep = hw_ep;
ux500_channel->is_allocated = 1;
dev_dbg(musb->controller, "hw_ep=%d, is_tx=0x%x, channel=%d\n",
hw_ep->epnum, is_tx, ch_num);
return &(ux500_channel->channel);
}
static void ux500_dma_channel_release(struct dma_channel *channel)
{
struct ux500_dma_channel *ux500_channel = channel->private_data;
struct musb *musb = ux500_channel->controller->private_data;
dev_dbg(musb->controller, "channel=%d\n", ux500_channel->ch_num);
if (ux500_channel->is_allocated) {
ux500_channel->is_allocated = 0;
channel->status = MUSB_DMA_STATUS_FREE;
channel->actual_len = 0;
}
}
static int ux500_dma_is_compatible(struct dma_channel *channel,
u16 maxpacket, void *buf, u32 length)
{
if ((maxpacket & 0x3) ||
((unsigned long int) buf & 0x3) ||
(length < 512) ||
(length & 0x3))
return false;
else
return true;
}
static int ux500_dma_channel_program(struct dma_channel *channel,
u16 packet_sz, u8 mode,
dma_addr_t dma_addr, u32 len)
{
int ret;
BUG_ON(channel->status == MUSB_DMA_STATUS_UNKNOWN ||
channel->status == MUSB_DMA_STATUS_BUSY);
channel->status = MUSB_DMA_STATUS_BUSY;
channel->actual_len = 0;
ret = ux500_configure_channel(channel, packet_sz, mode, dma_addr, len);
if (!ret)
channel->status = MUSB_DMA_STATUS_FREE;
return ret;
}
static int ux500_dma_channel_abort(struct dma_channel *channel)
{
struct ux500_dma_channel *ux500_channel = channel->private_data;
struct ux500_dma_controller *controller = ux500_channel->controller;
struct musb *musb = controller->private_data;
void __iomem *epio = musb->endpoints[ux500_channel->hw_ep->epnum].regs;
u16 csr;
dev_dbg(musb->controller, "channel=%d, is_tx=%d\n",
ux500_channel->ch_num, ux500_channel->is_tx);
if (channel->status == MUSB_DMA_STATUS_BUSY) {
if (ux500_channel->is_tx) {
csr = musb_readw(epio, MUSB_TXCSR);
csr &= ~(MUSB_TXCSR_AUTOSET |
MUSB_TXCSR_DMAENAB |
MUSB_TXCSR_DMAMODE);
musb_writew(epio, MUSB_TXCSR, csr);
} else {
csr = musb_readw(epio, MUSB_RXCSR);
csr &= ~(MUSB_RXCSR_AUTOCLEAR |
MUSB_RXCSR_DMAENAB |
MUSB_RXCSR_DMAMODE);
musb_writew(epio, MUSB_RXCSR, csr);
}
dmaengine_terminate_all(ux500_channel->dma_chan);
channel->status = MUSB_DMA_STATUS_FREE;
}
return 0;
}
static void ux500_dma_controller_stop(struct ux500_dma_controller *controller)
{
struct ux500_dma_channel *ux500_channel;
struct dma_channel *channel;
u8 ch_num;
for (ch_num = 0; ch_num < UX500_MUSB_DMA_NUM_RX_TX_CHANNELS; ch_num++) {
channel = &controller->rx_channel[ch_num].channel;
ux500_channel = channel->private_data;
ux500_dma_channel_release(channel);
if (ux500_channel->dma_chan)
dma_release_channel(ux500_channel->dma_chan);
}
for (ch_num = 0; ch_num < UX500_MUSB_DMA_NUM_RX_TX_CHANNELS; ch_num++) {
channel = &controller->tx_channel[ch_num].channel;
ux500_channel = channel->private_data;
ux500_dma_channel_release(channel);
if (ux500_channel->dma_chan)
dma_release_channel(ux500_channel->dma_chan);
}
}
static int ux500_dma_controller_start(struct ux500_dma_controller *controller)
{
struct ux500_dma_channel *ux500_channel = NULL;
struct musb *musb = controller->private_data;
struct device *dev = musb->controller;
struct musb_hdrc_platform_data *plat = dev_get_platdata(dev);
struct ux500_musb_board_data *data;
struct dma_channel *dma_channel = NULL;
char **chan_names;
u32 ch_num;
u8 dir;
u8 is_tx = 0;
void **param_array;
struct ux500_dma_channel *channel_array;
dma_cap_mask_t mask;
if (!plat) {
dev_err(musb->controller, "No platform data\n");
return -EINVAL;
}
data = plat->board_data;
dma_cap_zero(mask);
dma_cap_set(DMA_SLAVE, mask);
/* Prepare the loop for RX channels */
channel_array = controller->rx_channel;
param_array = data ? data->dma_rx_param_array : NULL;
chan_names = (char **)iep_chan_names;
for (dir = 0; dir < 2; dir++) {
for (ch_num = 0;
ch_num < UX500_MUSB_DMA_NUM_RX_TX_CHANNELS;
ch_num++) {
ux500_channel = &channel_array[ch_num];
ux500_channel->controller = controller;
ux500_channel->ch_num = ch_num;
ux500_channel->is_tx = is_tx;
dma_channel = &(ux500_channel->channel);
dma_channel->private_data = ux500_channel;
dma_channel->status = MUSB_DMA_STATUS_FREE;
dma_channel->max_len = SZ_16M;
ux500_channel->dma_chan =
dma_request_chan(dev, chan_names[ch_num]);
if (IS_ERR(ux500_channel->dma_chan))
ux500_channel->dma_chan =
dma_request_channel(mask,
data ?
data->dma_filter :
NULL,
param_array ?
param_array[ch_num] :
NULL);
if (!ux500_channel->dma_chan) {
ERR("Dma pipe allocation error dir=%d ch=%d\n",
dir, ch_num);
/* Release already allocated channels */
ux500_dma_controller_stop(controller);
return -EBUSY;
}
}
/* Prepare the loop for TX channels */
channel_array = controller->tx_channel;
param_array = data ? data->dma_tx_param_array : NULL;
chan_names = (char **)oep_chan_names;
is_tx = 1;
}
return 0;
}
void ux500_dma_controller_destroy(struct dma_controller *c)
{
struct ux500_dma_controller *controller = container_of(c,
struct ux500_dma_controller, controller);
ux500_dma_controller_stop(controller);
kfree(controller);
}
EXPORT_SYMBOL_GPL(ux500_dma_controller_destroy);
struct dma_controller *
ux500_dma_controller_create(struct musb *musb, void __iomem *base)
{
struct ux500_dma_controller *controller;
struct platform_device *pdev = to_platform_device(musb->controller);
struct resource *iomem;
int ret;
controller = kzalloc(sizeof(*controller), GFP_KERNEL);
if (!controller)
goto kzalloc_fail;
controller->private_data = musb;
/* Save physical address for DMA controller. */
iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!iomem) {
dev_err(musb->controller, "no memory resource defined\n");
goto plat_get_fail;
}
controller->phy_base = (dma_addr_t) iomem->start;
controller->controller.channel_alloc = ux500_dma_channel_allocate;
controller->controller.channel_release = ux500_dma_channel_release;
controller->controller.channel_program = ux500_dma_channel_program;
controller->controller.channel_abort = ux500_dma_channel_abort;
controller->controller.is_compatible = ux500_dma_is_compatible;
ret = ux500_dma_controller_start(controller);
if (ret)
goto plat_get_fail;
return &controller->controller;
plat_get_fail:
kfree(controller);
kzalloc_fail:
return NULL;
}
EXPORT_SYMBOL_GPL(ux500_dma_controller_create);
Codebase Browser
linux