// SPDX-License-Identifier: GPL-2.0-only
/* Copyright (c) 2024, Nikita Travkin <[email protected]> */
#include <linux/unaligned.h>
#include <drm/drm_bridge.h>
#include <linux/bits.h>
#include <linux/delay.h>
#include <linux/i2c.h>
#include <linux/input.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/power_supply.h>
#include <linux/usb/typec_mux.h>
#include <linux/workqueue_types.h>
#define MILLI_TO_MICRO 1000
#define ASPIRE_EC_EVENT 0x05
#define ASPIRE_EC_EVENT_WATCHDOG 0x20
#define ASPIRE_EC_EVENT_KBD_BKL_ON 0x57
#define ASPIRE_EC_EVENT_KBD_BKL_OFF 0x58
#define ASPIRE_EC_EVENT_LID_CLOSE 0x9b
#define ASPIRE_EC_EVENT_LID_OPEN 0x9c
#define ASPIRE_EC_EVENT_BKL_UNBLANKED 0x9d
#define ASPIRE_EC_EVENT_BKL_BLANKED 0x9e
#define ASPIRE_EC_EVENT_FG_INF_CHG 0x85
#define ASPIRE_EC_EVENT_FG_STA_CHG 0xc6
#define ASPIRE_EC_EVENT_HPD_DIS 0xa3
#define ASPIRE_EC_EVENT_HPD_CON 0xa4
#define ASPIRE_EC_FG_DYNAMIC 0x07
#define ASPIRE_EC_FG_STATIC 0x08
#define ASPIRE_EC_FG_FLAG_PRESENT BIT(0)
#define ASPIRE_EC_FG_FLAG_FULL BIT(1)
#define ASPIRE_EC_FG_FLAG_DISCHARGING BIT(2)
#define ASPIRE_EC_FG_FLAG_CHARGING BIT(3)
#define ASPIRE_EC_RAM_READ 0x20
#define ASPIRE_EC_RAM_WRITE 0x21
#define ASPIRE_EC_RAM_WATCHDOG 0x19
#define ASPIRE_EC_WATCHDOG_BIT BIT(6)
#define ASPIRE_EC_RAM_KBD_MODE 0x43
#define ASPIRE_EC_RAM_KBD_FN_EN BIT(0)
#define ASPIRE_EC_RAM_KBD_MEDIA_ON_TOP BIT(5)
#define ASPIRE_EC_RAM_KBD_ALWAYS_SET BIT(6)
#define ASPIRE_EC_RAM_KBD_NUM_LAYER_EN BIT(7)
#define ASPIRE_EC_RAM_KBD_MODE_2 0x60
#define ASPIRE_EC_RAM_KBD_MEDIA_NOTIFY BIT(3)
#define ASPIRE_EC_RAM_HPD_STATUS 0xf4
#define ASPIRE_EC_HPD_CONNECTED 0x03
#define ASPIRE_EC_RAM_LID_STATUS 0x4c
#define ASPIRE_EC_LID_OPEN BIT(6)
#define ASPIRE_EC_RAM_ADP 0x40
#define ASPIRE_EC_AC_STATUS BIT(0)
struct aspire_ec {
struct i2c_client *client;
struct power_supply *bat_psy;
struct power_supply *adp_psy;
struct input_dev *idev;
bool bridge_configured;
struct drm_bridge bridge;
struct work_struct work;
};
static int aspire_ec_ram_read(struct i2c_client *client, u8 off, u8 *data, u8 data_len)
{
i2c_smbus_write_byte_data(client, ASPIRE_EC_RAM_READ, off);
i2c_smbus_read_i2c_block_data(client, ASPIRE_EC_RAM_READ, data_len, data);
return 0;
}
static int aspire_ec_ram_write(struct i2c_client *client, u8 off, u8 data)
{
u8 tmp[2] = {off, data};
i2c_smbus_write_i2c_block_data(client, ASPIRE_EC_RAM_WRITE, sizeof(tmp), tmp);
return 0;
}
static irqreturn_t aspire_ec_irq_handler(int irq, void *data)
{
struct aspire_ec *ec = data;
int id;
u8 tmp;
/*
* The original ACPI firmware actually has a small sleep in the handler.
*
* It seems like in most cases it's not needed but when the device
* just exits suspend, our i2c driver has a brief time where data
* transfer is not possible yet. So this delay allows us to suppress
* quite a bunch of spurious error messages in dmesg. Thus it's kept.
*/
usleep_range(15000, 30000);
id = i2c_smbus_read_byte_data(ec->client, ASPIRE_EC_EVENT);
if (id < 0) {
dev_err(&ec->client->dev, "Failed to read event id: %pe\n", ERR_PTR(id));
return IRQ_HANDLED;
}
switch (id) {
case 0x0: /* No event */
break;
case ASPIRE_EC_EVENT_WATCHDOG:
/*
* Here acpi responds to the event and clears some bit.
* Notify (\_SB.I2C3.BAT1, 0x81) // Information Change
* Notify (\_SB.I2C3.ADP1, 0x80) // Status Change
*/
aspire_ec_ram_read(ec->client, ASPIRE_EC_RAM_WATCHDOG, &tmp, sizeof(tmp));
tmp &= ~ASPIRE_EC_WATCHDOG_BIT;
aspire_ec_ram_write(ec->client, ASPIRE_EC_RAM_WATCHDOG, tmp);
break;
case ASPIRE_EC_EVENT_LID_CLOSE:
/* Notify (\_SB.LID0, 0x80) // Status Change */
input_report_switch(ec->idev, SW_LID, 1);
input_sync(ec->idev);
break;
case ASPIRE_EC_EVENT_LID_OPEN:
/* Notify (\_SB.LID0, 0x80) // Status Change */
input_report_switch(ec->idev, SW_LID, 0);
input_sync(ec->idev);
break;
case ASPIRE_EC_EVENT_FG_INF_CHG:
/* Notify (\_SB.I2C3.BAT1, 0x81) // Information Change */
fallthrough;
case ASPIRE_EC_EVENT_FG_STA_CHG:
/* Notify (\_SB.I2C3.BAT1, 0x80) // Status Change */
power_supply_changed(ec->bat_psy);
power_supply_changed(ec->adp_psy);
break;
case ASPIRE_EC_EVENT_HPD_DIS:
if (ec->bridge_configured)
drm_bridge_hpd_notify(&ec->bridge, connector_status_disconnected);
break;
case ASPIRE_EC_EVENT_HPD_CON:
if (ec->bridge_configured)
drm_bridge_hpd_notify(&ec->bridge, connector_status_connected);
break;
case ASPIRE_EC_EVENT_BKL_BLANKED:
case ASPIRE_EC_EVENT_BKL_UNBLANKED:
/* Display backlight blanked on FN+F6. No action needed. */
break;
case ASPIRE_EC_EVENT_KBD_BKL_ON:
case ASPIRE_EC_EVENT_KBD_BKL_OFF:
/*
* There is a keyboard backlight connector on Aspire 1 that is
* controlled by FN+F8. There is no kb backlight on the device though.
* Seems like this is used on other devices like Acer Spin 7.
* No action needed.
*/
break;
default:
dev_warn(&ec->client->dev, "Unknown event id=0x%x\n", id);
}
return IRQ_HANDLED;
}
/*
* Power supply.
*/
struct aspire_ec_bat_psy_static_data {
u8 unk1;
u8 flags;
__le16 unk2;
__le16 voltage_design;
__le16 capacity_full;
__le16 unk3;
__le16 serial;
u8 model_id;
u8 vendor_id;
} __packed;
static const char * const aspire_ec_bat_psy_battery_model[] = {
"AP18C4K",
"AP18C8K",
"AP19B8K",
"AP16M4J",
"AP16M5J",
};
static const char * const aspire_ec_bat_psy_battery_vendor[] = {
"SANYO",
"SONY",
"PANASONIC",
"SAMSUNG",
"SIMPLO",
"MOTOROLA",
"CELXPERT",
"LGC",
"GETAC",
"MURATA",
};
struct aspire_ec_bat_psy_dynamic_data {
u8 unk1;
u8 flags;
u8 unk2;
__le16 capacity_now;
__le16 voltage_now;
__le16 current_now;
__le16 unk3;
__le16 unk4;
} __packed;
static int aspire_ec_bat_psy_get_property(struct power_supply *psy,
enum power_supply_property psp,
union power_supply_propval *val)
{
struct aspire_ec *ec = power_supply_get_drvdata(psy);
struct aspire_ec_bat_psy_static_data sdat;
struct aspire_ec_bat_psy_dynamic_data ddat;
int str_index = 0;
i2c_smbus_read_i2c_block_data(ec->client, ASPIRE_EC_FG_STATIC, sizeof(sdat), (u8 *)&sdat);
i2c_smbus_read_i2c_block_data(ec->client, ASPIRE_EC_FG_DYNAMIC, sizeof(ddat), (u8 *)&ddat);
switch (psp) {
case POWER_SUPPLY_PROP_STATUS:
val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
if (ddat.flags & ASPIRE_EC_FG_FLAG_CHARGING)
val->intval = POWER_SUPPLY_STATUS_CHARGING;
else if (ddat.flags & ASPIRE_EC_FG_FLAG_DISCHARGING)
val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
else if (ddat.flags & ASPIRE_EC_FG_FLAG_FULL)
val->intval = POWER_SUPPLY_STATUS_FULL;
break;
case POWER_SUPPLY_PROP_VOLTAGE_NOW:
val->intval = get_unaligned_le16(&ddat.voltage_now) * MILLI_TO_MICRO;
break;
case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
val->intval = le16_to_cpu(sdat.voltage_design) * MILLI_TO_MICRO;
break;
case POWER_SUPPLY_PROP_CHARGE_NOW:
val->intval = get_unaligned_le16(&ddat.capacity_now) * MILLI_TO_MICRO;
break;
case POWER_SUPPLY_PROP_CHARGE_FULL:
val->intval = le16_to_cpu(sdat.capacity_full) * MILLI_TO_MICRO;
break;
case POWER_SUPPLY_PROP_CAPACITY:
val->intval = get_unaligned_le16(&ddat.capacity_now) * 100;
val->intval /= le16_to_cpu(sdat.capacity_full);
break;
case POWER_SUPPLY_PROP_CURRENT_NOW:
val->intval = (s16)get_unaligned_le16(&ddat.current_now) * MILLI_TO_MICRO;
break;
case POWER_SUPPLY_PROP_PRESENT:
val->intval = !!(ddat.flags & ASPIRE_EC_FG_FLAG_PRESENT);
break;
case POWER_SUPPLY_PROP_SCOPE:
val->intval = POWER_SUPPLY_SCOPE_SYSTEM;
break;
case POWER_SUPPLY_PROP_MODEL_NAME:
str_index = sdat.model_id - 1;
if (str_index >= 0 && str_index < ARRAY_SIZE(aspire_ec_bat_psy_battery_model))
val->strval = aspire_ec_bat_psy_battery_model[str_index];
else
val->strval = "Unknown";
break;
case POWER_SUPPLY_PROP_MANUFACTURER:
str_index = sdat.vendor_id - 3; /* ACPI uses 3 as an offset here. */
if (str_index >= 0 && str_index < ARRAY_SIZE(aspire_ec_bat_psy_battery_vendor))
val->strval = aspire_ec_bat_psy_battery_vendor[str_index];
else
val->strval = "Unknown";
break;
default:
return -EINVAL;
}
return 0;
}
static enum power_supply_property aspire_ec_bat_psy_props[] = {
POWER_SUPPLY_PROP_STATUS,
POWER_SUPPLY_PROP_VOLTAGE_NOW,
POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
POWER_SUPPLY_PROP_CHARGE_NOW,
POWER_SUPPLY_PROP_CHARGE_FULL,
POWER_SUPPLY_PROP_CAPACITY,
POWER_SUPPLY_PROP_CURRENT_NOW,
POWER_SUPPLY_PROP_PRESENT,
POWER_SUPPLY_PROP_SCOPE,
POWER_SUPPLY_PROP_MODEL_NAME,
POWER_SUPPLY_PROP_MANUFACTURER,
};
static const struct power_supply_desc aspire_ec_bat_psy_desc = {
.name = "aspire-ec-bat",
.type = POWER_SUPPLY_TYPE_BATTERY,
.get_property = aspire_ec_bat_psy_get_property,
.properties = aspire_ec_bat_psy_props,
.num_properties = ARRAY_SIZE(aspire_ec_bat_psy_props),
};
static int aspire_ec_adp_psy_get_property(struct power_supply *psy,
enum power_supply_property psp,
union power_supply_propval *val)
{
struct aspire_ec *ec = power_supply_get_drvdata(psy);
u8 tmp;
switch (psp) {
case POWER_SUPPLY_PROP_ONLINE:
aspire_ec_ram_read(ec->client, ASPIRE_EC_RAM_ADP, &tmp, sizeof(tmp));
val->intval = !!(tmp & ASPIRE_EC_AC_STATUS);
break;
default:
return -EINVAL;
}
return 0;
}
static enum power_supply_property aspire_ec_adp_psy_props[] = {
POWER_SUPPLY_PROP_ONLINE,
};
static const struct power_supply_desc aspire_ec_adp_psy_desc = {
.name = "aspire-ec-adp",
.type = POWER_SUPPLY_TYPE_MAINS,
.get_property = aspire_ec_adp_psy_get_property,
.properties = aspire_ec_adp_psy_props,
.num_properties = ARRAY_SIZE(aspire_ec_adp_psy_props),
};
/*
* USB-C DP Alt mode HPD.
*/
static int aspire_ec_bridge_attach(struct drm_bridge *bridge, enum drm_bridge_attach_flags flags)
{
return flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR ? 0 : -EINVAL;
}
static void aspire_ec_bridge_update_hpd_work(struct work_struct *work)
{
struct aspire_ec *ec = container_of(work, struct aspire_ec, work);
u8 tmp;
aspire_ec_ram_read(ec->client, ASPIRE_EC_RAM_HPD_STATUS, &tmp, sizeof(tmp));
if (tmp == ASPIRE_EC_HPD_CONNECTED)
drm_bridge_hpd_notify(&ec->bridge, connector_status_connected);
else
drm_bridge_hpd_notify(&ec->bridge, connector_status_disconnected);
}
static void aspire_ec_bridge_hpd_enable(struct drm_bridge *bridge)
{
struct aspire_ec *ec = container_of(bridge, struct aspire_ec, bridge);
schedule_work(&ec->work);
}
static const struct drm_bridge_funcs aspire_ec_bridge_funcs = {
.hpd_enable = aspire_ec_bridge_hpd_enable,
.attach = aspire_ec_bridge_attach,
};
/*
* Sysfs attributes.
*/
static ssize_t fn_lock_show(struct device *dev, struct device_attribute *attr, char *buf)
{
struct aspire_ec *ec = i2c_get_clientdata(to_i2c_client(dev));
u8 tmp;
aspire_ec_ram_read(ec->client, ASPIRE_EC_RAM_KBD_MODE, &tmp, sizeof(tmp));
return sysfs_emit(buf, "%u\n", !(tmp & ASPIRE_EC_RAM_KBD_MEDIA_ON_TOP));
}
static ssize_t fn_lock_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct aspire_ec *ec = i2c_get_clientdata(to_i2c_client(dev));
u8 tmp;
bool state;
int ret;
ret = kstrtobool(buf, &state);
if (ret)
return ret;
aspire_ec_ram_read(ec->client, ASPIRE_EC_RAM_KBD_MODE, &tmp, sizeof(tmp));
if (state)
tmp &= ~ASPIRE_EC_RAM_KBD_MEDIA_ON_TOP;
else
tmp |= ASPIRE_EC_RAM_KBD_MEDIA_ON_TOP;
aspire_ec_ram_write(ec->client, ASPIRE_EC_RAM_KBD_MODE, tmp);
return count;
}
static DEVICE_ATTR_RW(fn_lock);
static struct attribute *aspire_ec_attrs[] = {
&dev_attr_fn_lock.attr,
NULL
};
ATTRIBUTE_GROUPS(aspire_ec);
static int aspire_ec_probe(struct i2c_client *client)
{
struct power_supply_config psy_cfg = {0};
struct device *dev = &client->dev;
struct fwnode_handle *fwnode;
struct aspire_ec *ec;
int ret;
u8 tmp;
ec = devm_kzalloc(dev, sizeof(*ec), GFP_KERNEL);
if (!ec)
return -ENOMEM;
ec->client = client;
i2c_set_clientdata(client, ec);
/* Battery status reports */
psy_cfg.drv_data = ec;
ec->bat_psy = devm_power_supply_register(dev, &aspire_ec_bat_psy_desc, &psy_cfg);
if (IS_ERR(ec->bat_psy))
return dev_err_probe(dev, PTR_ERR(ec->bat_psy),
"Failed to register battery power supply\n");
ec->adp_psy = devm_power_supply_register(dev, &aspire_ec_adp_psy_desc, &psy_cfg);
if (IS_ERR(ec->adp_psy))
return dev_err_probe(dev, PTR_ERR(ec->adp_psy),
"Failed to register AC power supply\n");
/* Lid switch */
ec->idev = devm_input_allocate_device(dev);
if (!ec->idev)
return -ENOMEM;
ec->idev->name = "aspire-ec";
ec->idev->phys = "aspire-ec/input0";
input_set_capability(ec->idev, EV_SW, SW_LID);
ret = input_register_device(ec->idev);
if (ret)
return dev_err_probe(dev, ret, "Input device register failed\n");
/* Enable the keyboard fn keys */
tmp = ASPIRE_EC_RAM_KBD_FN_EN | ASPIRE_EC_RAM_KBD_ALWAYS_SET;
tmp |= ASPIRE_EC_RAM_KBD_MEDIA_ON_TOP;
aspire_ec_ram_write(client, ASPIRE_EC_RAM_KBD_MODE, tmp);
aspire_ec_ram_read(client, ASPIRE_EC_RAM_KBD_MODE_2, &tmp, sizeof(tmp));
tmp |= ASPIRE_EC_RAM_KBD_MEDIA_NOTIFY;
aspire_ec_ram_write(client, ASPIRE_EC_RAM_KBD_MODE_2, tmp);
/* External Type-C display attach reports */
fwnode = device_get_named_child_node(dev, "connector");
if (fwnode) {
INIT_WORK(&ec->work, aspire_ec_bridge_update_hpd_work);
ec->bridge.funcs = &aspire_ec_bridge_funcs;
ec->bridge.of_node = to_of_node(fwnode);
ec->bridge.ops = DRM_BRIDGE_OP_HPD;
ec->bridge.type = DRM_MODE_CONNECTOR_USB;
ret = devm_drm_bridge_add(dev, &ec->bridge);
if (ret) {
fwnode_handle_put(fwnode);
return dev_err_probe(dev, ret, "Failed to register drm bridge\n");
}
ec->bridge_configured = true;
}
ret = devm_request_threaded_irq(dev, client->irq, NULL,
aspire_ec_irq_handler, IRQF_ONESHOT,
dev_name(dev), ec);
if (ret)
return dev_err_probe(dev, ret, "Failed to request irq\n");
return 0;
}
static int aspire_ec_resume(struct device *dev)
{
struct aspire_ec *ec = i2c_get_clientdata(to_i2c_client(dev));
u8 tmp;
aspire_ec_ram_read(ec->client, ASPIRE_EC_RAM_LID_STATUS, &tmp, sizeof(tmp));
input_report_switch(ec->idev, SW_LID, !!(tmp & ASPIRE_EC_LID_OPEN));
input_sync(ec->idev);
return 0;
}
static const struct i2c_device_id aspire_ec_id[] = {
{ "aspire1-ec", },
{ }
};
MODULE_DEVICE_TABLE(i2c, aspire_ec_id);
static const struct of_device_id aspire_ec_of_match[] = {
{ .compatible = "acer,aspire1-ec", },
{ }
};
MODULE_DEVICE_TABLE(of, aspire_ec_of_match);
static DEFINE_SIMPLE_DEV_PM_OPS(aspire_ec_pm_ops, NULL, aspire_ec_resume);
static struct i2c_driver aspire_ec_driver = {
.driver = {
.name = "aspire-ec",
.of_match_table = aspire_ec_of_match,
.pm = pm_sleep_ptr(&aspire_ec_pm_ops),
.dev_groups = aspire_ec_groups,
},
.probe = aspire_ec_probe,
.id_table = aspire_ec_id,
};
module_i2c_driver(aspire_ec_driver);
MODULE_DESCRIPTION("Acer Aspire 1 embedded controller");
MODULE_AUTHOR("Nikita Travkin <[email protected]>");
MODULE_LICENSE("GPL");