# SPDX-License-Identifier: GPL-2.0-only
menuconfig VDPA
tristate "vDPA drivers"
depends on NET
help
Enable this module to support vDPA device that uses a
datapath which complies with virtio specifications with
vendor specific control path.
if VDPA
config VDPA_SIM
tristate "vDPA device simulator core"
depends on RUNTIME_TESTING_MENU
select VHOST_RING
select IOMMU_IOVA
help
Enable this module to support vDPA device simulators. These devices
are used for testing, prototyping and development of vDPA.
config VDPA_SIM_NET
tristate "vDPA simulator for networking device"
depends on VDPA_SIM
select GENERIC_NET_UTILS
help
vDPA networking device simulator which loops TX traffic back to RX.
config VDPA_SIM_BLOCK
tristate "vDPA simulator for block device"
depends on VDPA_SIM
help
vDPA block device simulator which terminates IO request in a
memory buffer.
config VDPA_USER
tristate "VDUSE (vDPA Device in Userspace) support"
depends on EVENTFD && MMU && HAS_DMA
#
# This driver incorrectly tries to override the dma_ops. It should
# never have done that, but for now keep it working on architectures
# that use dma ops
#
depends on ARCH_HAS_DMA_OPS
select VHOST_IOTLB
select IOMMU_IOVA
help
With VDUSE it is possible to emulate a vDPA Device
in a userspace program.
config IFCVF
tristate "Intel IFC VF vDPA driver"
depends on PCI_MSI
help
This kernel module can drive Intel IFC VF NIC to offload
virtio dataplane traffic to hardware.
To compile this driver as a module, choose M here: the module will
be called ifcvf.
config MLX5_VDPA
bool
select VHOST_IOTLB
help
Support library for Mellanox VDPA drivers. Provides code that is
common for all types of VDPA drivers. The following drivers are planned:
net, block.
config MLX5_VDPA_NET
tristate "vDPA driver for ConnectX devices"
select MLX5_VDPA
select VHOST_RING
depends on MLX5_CORE
help
VDPA network driver for ConnectX6 and newer. Provides offloading
of virtio net datapath such that descriptors put on the ring will
be executed by the hardware. It also supports a variety of stateless
offloads depending on the actual device used and firmware version.
config MLX5_VDPA_STEERING_DEBUG
bool "expose steering counters on debugfs"
select MLX5_VDPA
help
Expose RX steering counters in debugfs to aid in debugging. For each VLAN
or non VLAN interface, two hardware counters are added to the RX flow
table: one for unicast and one for multicast.
The counters counts the number of packets and bytes and exposes them in
debugfs. Once can read the counters using, e.g.:
cat /sys/kernel/debug/mlx5/mlx5_core.sf.1/vdpa-0/rx/untagged/ucast/packets
cat /sys/kernel/debug/mlx5/mlx5_core.sf.1/vdpa-0/rx/untagged/mcast/bytes
config VP_VDPA
tristate "Virtio PCI bridge vDPA driver"
select VIRTIO_PCI_LIB
depends on PCI_MSI
help
This kernel module bridges virtio PCI device to vDPA bus.
config ALIBABA_ENI_VDPA
tristate "vDPA driver for Alibaba ENI"
select VIRTIO_PCI_LIB_LEGACY
depends on PCI_MSI && X86
help
VDPA driver for Alibaba ENI (Elastic Network Interface) which is built upon
virtio 0.9.5 specification.
config SNET_VDPA
tristate "SolidRun's vDPA driver for SolidNET"
depends on PCI_MSI && PCI_IOV && (HWMON || HWMON=n)
# This driver MAY create a HWMON device.
# Depending on (HWMON || HWMON=n) ensures that:
# If HWMON=n the driver can be compiled either as a module or built-in.
# If HWMON=y the driver can be compiled either as a module or built-in.
# If HWMON=m the driver is forced to be compiled as a module.
# By doing so, IS_ENABLED can be used instead of IS_REACHABLE
help
vDPA driver for SolidNET DPU.
With this driver, the VirtIO dataplane can be
offloaded to a SolidNET DPU.
This driver includes a HW monitor device that
reads health values from the DPU.
config PDS_VDPA
tristate "vDPA driver for AMD/Pensando DSC devices"
select VIRTIO_PCI_LIB
depends on PCI_MSI
depends on PDS_CORE
help
vDPA network driver for AMD/Pensando's PDS Core devices.
With this driver, the VirtIO dataplane can be
offloaded to an AMD/Pensando DSC device.
config OCTEONEP_VDPA
tristate "vDPA driver for Octeon DPU devices"
depends on m
depends on PCI_MSI
help
This is a vDPA driver designed for Marvell's Octeon DPU devices.
This driver enables the offloading of the VirtIO dataplane to an
Octeon DPU device.
Please note that this driver must be built as a module and it
cannot be loaded until the Octeon emulation software is running.
endif # VDPA
Codebase Browser
linux