// SPDX-License-Identifier: GPL-2.0
/* Copyright (C) 2020 Daniel Palmer<[email protected]> */
#include <linux/bitops.h>
#include <linux/kernel.h>
#include <linux/io.h>
#include <linux/of.h>
#include <linux/of_irq.h>
#include <linux/gpio/driver.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/property.h>
#include <linux/types.h>
#include <dt-bindings/gpio/msc313-gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#define DRIVER_NAME "gpio-msc313"
#define MSC313_GPIO_IN BIT(0)
#define MSC313_GPIO_OUT BIT(4)
#define MSC313_GPIO_OEN BIT(5)
/*
* These bits need to be saved to correctly restore the
* gpio state when resuming from suspend to memory.
*/
#define MSC313_GPIO_BITSTOSAVE (MSC313_GPIO_OUT | MSC313_GPIO_OEN)
/* pad names for fuart, same for all SoCs so far */
#define MSC313_PINNAME_FUART_RX "fuart_rx"
#define MSC313_PINNAME_FUART_TX "fuart_tx"
#define MSC313_PINNAME_FUART_CTS "fuart_cts"
#define MSC313_PINNAME_FUART_RTS "fuart_rts"
/* pad names for sr, mercury5 is different */
#define MSC313_PINNAME_SR_IO2 "sr_io2"
#define MSC313_PINNAME_SR_IO3 "sr_io3"
#define MSC313_PINNAME_SR_IO4 "sr_io4"
#define MSC313_PINNAME_SR_IO5 "sr_io5"
#define MSC313_PINNAME_SR_IO6 "sr_io6"
#define MSC313_PINNAME_SR_IO7 "sr_io7"
#define MSC313_PINNAME_SR_IO8 "sr_io8"
#define MSC313_PINNAME_SR_IO9 "sr_io9"
#define MSC313_PINNAME_SR_IO10 "sr_io10"
#define MSC313_PINNAME_SR_IO11 "sr_io11"
#define MSC313_PINNAME_SR_IO12 "sr_io12"
#define MSC313_PINNAME_SR_IO13 "sr_io13"
#define MSC313_PINNAME_SR_IO14 "sr_io14"
#define MSC313_PINNAME_SR_IO15 "sr_io15"
#define MSC313_PINNAME_SR_IO16 "sr_io16"
#define MSC313_PINNAME_SR_IO17 "sr_io17"
/* pad names for sd, same for all SoCs so far */
#define MSC313_PINNAME_SD_CLK "sd_clk"
#define MSC313_PINNAME_SD_CMD "sd_cmd"
#define MSC313_PINNAME_SD_D0 "sd_d0"
#define MSC313_PINNAME_SD_D1 "sd_d1"
#define MSC313_PINNAME_SD_D2 "sd_d2"
#define MSC313_PINNAME_SD_D3 "sd_d3"
/* pad names for i2c1, same for all SoCs so for */
#define MSC313_PINNAME_I2C1_SCL "i2c1_scl"
#define MSC313_PINNAME_I2C1_SCA "i2c1_sda"
/* pad names for spi0, same for all SoCs so far */
#define MSC313_PINNAME_SPI0_CZ "spi0_cz"
#define MSC313_PINNAME_SPI0_CK "spi0_ck"
#define MSC313_PINNAME_SPI0_DI "spi0_di"
#define MSC313_PINNAME_SPI0_DO "spi0_do"
#define FUART_NAMES \
MSC313_PINNAME_FUART_RX, \
MSC313_PINNAME_FUART_TX, \
MSC313_PINNAME_FUART_CTS, \
MSC313_PINNAME_FUART_RTS
#define OFF_FUART_RX 0x50
#define OFF_FUART_TX 0x54
#define OFF_FUART_CTS 0x58
#define OFF_FUART_RTS 0x5c
#define FUART_OFFSETS \
OFF_FUART_RX, \
OFF_FUART_TX, \
OFF_FUART_CTS, \
OFF_FUART_RTS
#define SR_NAMES \
MSC313_PINNAME_SR_IO2, \
MSC313_PINNAME_SR_IO3, \
MSC313_PINNAME_SR_IO4, \
MSC313_PINNAME_SR_IO5, \
MSC313_PINNAME_SR_IO6, \
MSC313_PINNAME_SR_IO7, \
MSC313_PINNAME_SR_IO8, \
MSC313_PINNAME_SR_IO9, \
MSC313_PINNAME_SR_IO10, \
MSC313_PINNAME_SR_IO11, \
MSC313_PINNAME_SR_IO12, \
MSC313_PINNAME_SR_IO13, \
MSC313_PINNAME_SR_IO14, \
MSC313_PINNAME_SR_IO15, \
MSC313_PINNAME_SR_IO16, \
MSC313_PINNAME_SR_IO17
#define OFF_SR_IO2 0x88
#define OFF_SR_IO3 0x8c
#define OFF_SR_IO4 0x90
#define OFF_SR_IO5 0x94
#define OFF_SR_IO6 0x98
#define OFF_SR_IO7 0x9c
#define OFF_SR_IO8 0xa0
#define OFF_SR_IO9 0xa4
#define OFF_SR_IO10 0xa8
#define OFF_SR_IO11 0xac
#define OFF_SR_IO12 0xb0
#define OFF_SR_IO13 0xb4
#define OFF_SR_IO14 0xb8
#define OFF_SR_IO15 0xbc
#define OFF_SR_IO16 0xc0
#define OFF_SR_IO17 0xc4
#define SR_OFFSETS \
OFF_SR_IO2, \
OFF_SR_IO3, \
OFF_SR_IO4, \
OFF_SR_IO5, \
OFF_SR_IO6, \
OFF_SR_IO7, \
OFF_SR_IO8, \
OFF_SR_IO9, \
OFF_SR_IO10, \
OFF_SR_IO11, \
OFF_SR_IO12, \
OFF_SR_IO13, \
OFF_SR_IO14, \
OFF_SR_IO15, \
OFF_SR_IO16, \
OFF_SR_IO17
#define SD_NAMES \
MSC313_PINNAME_SD_CLK, \
MSC313_PINNAME_SD_CMD, \
MSC313_PINNAME_SD_D0, \
MSC313_PINNAME_SD_D1, \
MSC313_PINNAME_SD_D2, \
MSC313_PINNAME_SD_D3
#define OFF_SD_CLK 0x140
#define OFF_SD_CMD 0x144
#define OFF_SD_D0 0x148
#define OFF_SD_D1 0x14c
#define OFF_SD_D2 0x150
#define OFF_SD_D3 0x154
#define SD_OFFSETS \
OFF_SD_CLK, \
OFF_SD_CMD, \
OFF_SD_D0, \
OFF_SD_D1, \
OFF_SD_D2, \
OFF_SD_D3
#define I2C1_NAMES \
MSC313_PINNAME_I2C1_SCL, \
MSC313_PINNAME_I2C1_SCA
#define OFF_I2C1_SCL 0x188
#define OFF_I2C1_SCA 0x18c
#define I2C1_OFFSETS \
OFF_I2C1_SCL, \
OFF_I2C1_SCA
#define SPI0_NAMES \
MSC313_PINNAME_SPI0_CZ, \
MSC313_PINNAME_SPI0_CK, \
MSC313_PINNAME_SPI0_DI, \
MSC313_PINNAME_SPI0_DO
#define OFF_SPI0_CZ 0x1c0
#define OFF_SPI0_CK 0x1c4
#define OFF_SPI0_DI 0x1c8
#define OFF_SPI0_DO 0x1cc
#define SPI0_OFFSETS \
OFF_SPI0_CZ, \
OFF_SPI0_CK, \
OFF_SPI0_DI, \
OFF_SPI0_DO
struct msc313_gpio_data {
const char * const *names;
const unsigned int *offsets;
const unsigned int num;
};
#define MSC313_GPIO_CHIPDATA(_chip) \
static const struct msc313_gpio_data _chip##_data = { \
.names = _chip##_names, \
.offsets = _chip##_offsets, \
.num = ARRAY_SIZE(_chip##_offsets), \
}
#ifdef CONFIG_MACH_INFINITY
static const char * const msc313_names[] = {
FUART_NAMES,
SR_NAMES,
SD_NAMES,
I2C1_NAMES,
SPI0_NAMES,
};
static const unsigned int msc313_offsets[] = {
FUART_OFFSETS,
SR_OFFSETS,
SD_OFFSETS,
I2C1_OFFSETS,
SPI0_OFFSETS,
};
MSC313_GPIO_CHIPDATA(msc313);
/*
* Unlike the msc313(e) the ssd20xd have a bunch of pins
* that are actually called gpio probably because they
* have no dedicated function.
*/
#define SSD20XD_PINNAME_GPIO0 "gpio0"
#define SSD20XD_PINNAME_GPIO1 "gpio1"
#define SSD20XD_PINNAME_GPIO2 "gpio2"
#define SSD20XD_PINNAME_GPIO3 "gpio3"
#define SSD20XD_PINNAME_GPIO4 "gpio4"
#define SSD20XD_PINNAME_GPIO5 "gpio5"
#define SSD20XD_PINNAME_GPIO6 "gpio6"
#define SSD20XD_PINNAME_GPIO7 "gpio7"
#define SSD20XD_PINNAME_GPIO10 "gpio10"
#define SSD20XD_PINNAME_GPIO11 "gpio11"
#define SSD20XD_PINNAME_GPIO12 "gpio12"
#define SSD20XD_PINNAME_GPIO13 "gpio13"
#define SSD20XD_PINNAME_GPIO14 "gpio14"
#define SSD20XD_PINNAME_GPIO85 "gpio85"
#define SSD20XD_PINNAME_GPIO86 "gpio86"
#define SSD20XD_PINNAME_GPIO90 "gpio90"
#define SSD20XD_GPIO_NAMES SSD20XD_PINNAME_GPIO0, \
SSD20XD_PINNAME_GPIO1, \
SSD20XD_PINNAME_GPIO2, \
SSD20XD_PINNAME_GPIO3, \
SSD20XD_PINNAME_GPIO4, \
SSD20XD_PINNAME_GPIO5, \
SSD20XD_PINNAME_GPIO6, \
SSD20XD_PINNAME_GPIO7, \
SSD20XD_PINNAME_GPIO10, \
SSD20XD_PINNAME_GPIO11, \
SSD20XD_PINNAME_GPIO12, \
SSD20XD_PINNAME_GPIO13, \
SSD20XD_PINNAME_GPIO14, \
SSD20XD_PINNAME_GPIO85, \
SSD20XD_PINNAME_GPIO86, \
SSD20XD_PINNAME_GPIO90
#define SSD20XD_GPIO_OFF_GPIO0 0x0
#define SSD20XD_GPIO_OFF_GPIO1 0x4
#define SSD20XD_GPIO_OFF_GPIO2 0x8
#define SSD20XD_GPIO_OFF_GPIO3 0xc
#define SSD20XD_GPIO_OFF_GPIO4 0x10
#define SSD20XD_GPIO_OFF_GPIO5 0x14
#define SSD20XD_GPIO_OFF_GPIO6 0x18
#define SSD20XD_GPIO_OFF_GPIO7 0x1c
#define SSD20XD_GPIO_OFF_GPIO10 0x28
#define SSD20XD_GPIO_OFF_GPIO11 0x2c
#define SSD20XD_GPIO_OFF_GPIO12 0x30
#define SSD20XD_GPIO_OFF_GPIO13 0x34
#define SSD20XD_GPIO_OFF_GPIO14 0x38
#define SSD20XD_GPIO_OFF_GPIO85 0x100
#define SSD20XD_GPIO_OFF_GPIO86 0x104
#define SSD20XD_GPIO_OFF_GPIO90 0x114
#define SSD20XD_GPIO_OFFSETS SSD20XD_GPIO_OFF_GPIO0, \
SSD20XD_GPIO_OFF_GPIO1, \
SSD20XD_GPIO_OFF_GPIO2, \
SSD20XD_GPIO_OFF_GPIO3, \
SSD20XD_GPIO_OFF_GPIO4, \
SSD20XD_GPIO_OFF_GPIO5, \
SSD20XD_GPIO_OFF_GPIO6, \
SSD20XD_GPIO_OFF_GPIO7, \
SSD20XD_GPIO_OFF_GPIO10, \
SSD20XD_GPIO_OFF_GPIO11, \
SSD20XD_GPIO_OFF_GPIO12, \
SSD20XD_GPIO_OFF_GPIO13, \
SSD20XD_GPIO_OFF_GPIO14, \
SSD20XD_GPIO_OFF_GPIO85, \
SSD20XD_GPIO_OFF_GPIO86, \
SSD20XD_GPIO_OFF_GPIO90
/* "ttl" pins lcd interface pins */
#define SSD20XD_PINNAME_TTL0 "ttl0"
#define SSD20XD_PINNAME_TTL1 "ttl1"
#define SSD20XD_PINNAME_TTL2 "ttl2"
#define SSD20XD_PINNAME_TTL3 "ttl3"
#define SSD20XD_PINNAME_TTL4 "ttl4"
#define SSD20XD_PINNAME_TTL5 "ttl5"
#define SSD20XD_PINNAME_TTL6 "ttl6"
#define SSD20XD_PINNAME_TTL7 "ttl7"
#define SSD20XD_PINNAME_TTL8 "ttl8"
#define SSD20XD_PINNAME_TTL9 "ttl9"
#define SSD20XD_PINNAME_TTL10 "ttl10"
#define SSD20XD_PINNAME_TTL11 "ttl11"
#define SSD20XD_PINNAME_TTL12 "ttl12"
#define SSD20XD_PINNAME_TTL13 "ttl13"
#define SSD20XD_PINNAME_TTL14 "ttl14"
#define SSD20XD_PINNAME_TTL15 "ttl15"
#define SSD20XD_PINNAME_TTL16 "ttl16"
#define SSD20XD_PINNAME_TTL17 "ttl17"
#define SSD20XD_PINNAME_TTL18 "ttl18"
#define SSD20XD_PINNAME_TTL19 "ttl19"
#define SSD20XD_PINNAME_TTL20 "ttl20"
#define SSD20XD_PINNAME_TTL21 "ttl21"
#define SSD20XD_PINNAME_TTL22 "ttl22"
#define SSD20XD_PINNAME_TTL23 "ttl23"
#define SSD20XD_PINNAME_TTL24 "ttl24"
#define SSD20XD_PINNAME_TTL25 "ttl25"
#define SSD20XD_PINNAME_TTL26 "ttl26"
#define SSD20XD_PINNAME_TTL27 "ttl27"
#define SSD20XD_TTL_PINNAMES SSD20XD_PINNAME_TTL0, \
SSD20XD_PINNAME_TTL1, \
SSD20XD_PINNAME_TTL2, \
SSD20XD_PINNAME_TTL3, \
SSD20XD_PINNAME_TTL4, \
SSD20XD_PINNAME_TTL5, \
SSD20XD_PINNAME_TTL6, \
SSD20XD_PINNAME_TTL7, \
SSD20XD_PINNAME_TTL8, \
SSD20XD_PINNAME_TTL9, \
SSD20XD_PINNAME_TTL10, \
SSD20XD_PINNAME_TTL11, \
SSD20XD_PINNAME_TTL12, \
SSD20XD_PINNAME_TTL13, \
SSD20XD_PINNAME_TTL14, \
SSD20XD_PINNAME_TTL15, \
SSD20XD_PINNAME_TTL16, \
SSD20XD_PINNAME_TTL17, \
SSD20XD_PINNAME_TTL18, \
SSD20XD_PINNAME_TTL19, \
SSD20XD_PINNAME_TTL20, \
SSD20XD_PINNAME_TTL21, \
SSD20XD_PINNAME_TTL22, \
SSD20XD_PINNAME_TTL23, \
SSD20XD_PINNAME_TTL24, \
SSD20XD_PINNAME_TTL25, \
SSD20XD_PINNAME_TTL26, \
SSD20XD_PINNAME_TTL27
#define SSD20XD_TTL_OFFSET_TTL0 0x80
#define SSD20XD_TTL_OFFSET_TTL1 0x84
#define SSD20XD_TTL_OFFSET_TTL2 0x88
#define SSD20XD_TTL_OFFSET_TTL3 0x8c
#define SSD20XD_TTL_OFFSET_TTL4 0x90
#define SSD20XD_TTL_OFFSET_TTL5 0x94
#define SSD20XD_TTL_OFFSET_TTL6 0x98
#define SSD20XD_TTL_OFFSET_TTL7 0x9c
#define SSD20XD_TTL_OFFSET_TTL8 0xa0
#define SSD20XD_TTL_OFFSET_TTL9 0xa4
#define SSD20XD_TTL_OFFSET_TTL10 0xa8
#define SSD20XD_TTL_OFFSET_TTL11 0xac
#define SSD20XD_TTL_OFFSET_TTL12 0xb0
#define SSD20XD_TTL_OFFSET_TTL13 0xb4
#define SSD20XD_TTL_OFFSET_TTL14 0xb8
#define SSD20XD_TTL_OFFSET_TTL15 0xbc
#define SSD20XD_TTL_OFFSET_TTL16 0xc0
#define SSD20XD_TTL_OFFSET_TTL17 0xc4
#define SSD20XD_TTL_OFFSET_TTL18 0xc8
#define SSD20XD_TTL_OFFSET_TTL19 0xcc
#define SSD20XD_TTL_OFFSET_TTL20 0xd0
#define SSD20XD_TTL_OFFSET_TTL21 0xd4
#define SSD20XD_TTL_OFFSET_TTL22 0xd8
#define SSD20XD_TTL_OFFSET_TTL23 0xdc
#define SSD20XD_TTL_OFFSET_TTL24 0xe0
#define SSD20XD_TTL_OFFSET_TTL25 0xe4
#define SSD20XD_TTL_OFFSET_TTL26 0xe8
#define SSD20XD_TTL_OFFSET_TTL27 0xec
#define SSD20XD_TTL_OFFSETS SSD20XD_TTL_OFFSET_TTL0, \
SSD20XD_TTL_OFFSET_TTL1, \
SSD20XD_TTL_OFFSET_TTL2, \
SSD20XD_TTL_OFFSET_TTL3, \
SSD20XD_TTL_OFFSET_TTL4, \
SSD20XD_TTL_OFFSET_TTL5, \
SSD20XD_TTL_OFFSET_TTL6, \
SSD20XD_TTL_OFFSET_TTL7, \
SSD20XD_TTL_OFFSET_TTL8, \
SSD20XD_TTL_OFFSET_TTL9, \
SSD20XD_TTL_OFFSET_TTL10, \
SSD20XD_TTL_OFFSET_TTL11, \
SSD20XD_TTL_OFFSET_TTL12, \
SSD20XD_TTL_OFFSET_TTL13, \
SSD20XD_TTL_OFFSET_TTL14, \
SSD20XD_TTL_OFFSET_TTL15, \
SSD20XD_TTL_OFFSET_TTL16, \
SSD20XD_TTL_OFFSET_TTL17, \
SSD20XD_TTL_OFFSET_TTL18, \
SSD20XD_TTL_OFFSET_TTL19, \
SSD20XD_TTL_OFFSET_TTL20, \
SSD20XD_TTL_OFFSET_TTL21, \
SSD20XD_TTL_OFFSET_TTL22, \
SSD20XD_TTL_OFFSET_TTL23, \
SSD20XD_TTL_OFFSET_TTL24, \
SSD20XD_TTL_OFFSET_TTL25, \
SSD20XD_TTL_OFFSET_TTL26, \
SSD20XD_TTL_OFFSET_TTL27
/* On the ssd20xd the two normal uarts have dedicated pins */
#define SSD20XD_PINNAME_UART0_RX "uart0_rx"
#define SSD20XD_PINNAME_UART0_TX "uart0_tx"
#define SSD20XD_UART0_NAMES \
SSD20XD_PINNAME_UART0_RX, \
SSD20XD_PINNAME_UART0_TX
#define SSD20XD_PINNAME_UART1_RX "uart1_rx"
#define SSD20XD_PINNAME_UART1_TX "uart1_tx"
#define SSD20XD_UART1_NAMES \
SSD20XD_PINNAME_UART1_RX, \
SSD20XD_PINNAME_UART1_TX
#define SSD20XD_OFF_UART0_RX 0x60
#define SSD20XD_OFF_UART0_TX 0x64
#define SSD20XD_UART0_OFFSETS \
SSD20XD_OFF_UART0_RX, \
SSD20XD_OFF_UART0_TX
#define SSD20XD_OFF_UART1_RX 0x68
#define SSD20XD_OFF_UART1_TX 0x6c
#define SSD20XD_UART1_OFFSETS \
SSD20XD_OFF_UART1_RX, \
SSD20XD_OFF_UART1_TX
/*
* ssd20x has the same pin names but different ordering
* of the registers that control the gpio.
*/
#define SSD20XD_OFF_SD_D0 0x140
#define SSD20XD_OFF_SD_D1 0x144
#define SSD20XD_OFF_SD_D2 0x148
#define SSD20XD_OFF_SD_D3 0x14c
#define SSD20XD_OFF_SD_CMD 0x150
#define SSD20XD_OFF_SD_CLK 0x154
#define SSD20XD_SD_OFFSETS SSD20XD_OFF_SD_CLK, \
SSD20XD_OFF_SD_CMD, \
SSD20XD_OFF_SD_D0, \
SSD20XD_OFF_SD_D1, \
SSD20XD_OFF_SD_D2, \
SSD20XD_OFF_SD_D3
static const char * const ssd20xd_names[] = {
FUART_NAMES,
SD_NAMES,
SSD20XD_UART0_NAMES,
SSD20XD_UART1_NAMES,
SSD20XD_TTL_PINNAMES,
SSD20XD_GPIO_NAMES,
};
static const unsigned int ssd20xd_offsets[] = {
FUART_OFFSETS,
SSD20XD_SD_OFFSETS,
SSD20XD_UART0_OFFSETS,
SSD20XD_UART1_OFFSETS,
SSD20XD_TTL_OFFSETS,
SSD20XD_GPIO_OFFSETS,
};
MSC313_GPIO_CHIPDATA(ssd20xd);
#endif
struct msc313_gpio {
void __iomem *base;
const struct msc313_gpio_data *gpio_data;
u8 *saved;
};
static void msc313_gpio_set(struct gpio_chip *chip, unsigned int offset, int value)
{
struct msc313_gpio *gpio = gpiochip_get_data(chip);
u8 gpioreg = readb_relaxed(gpio->base + gpio->gpio_data->offsets[offset]);
if (value)
gpioreg |= MSC313_GPIO_OUT;
else
gpioreg &= ~MSC313_GPIO_OUT;
writeb_relaxed(gpioreg, gpio->base + gpio->gpio_data->offsets[offset]);
}
static int msc313_gpio_get(struct gpio_chip *chip, unsigned int offset)
{
struct msc313_gpio *gpio = gpiochip_get_data(chip);
return readb_relaxed(gpio->base + gpio->gpio_data->offsets[offset]) & MSC313_GPIO_IN;
}
static int msc313_gpio_direction_input(struct gpio_chip *chip, unsigned int offset)
{
struct msc313_gpio *gpio = gpiochip_get_data(chip);
u8 gpioreg = readb_relaxed(gpio->base + gpio->gpio_data->offsets[offset]);
gpioreg |= MSC313_GPIO_OEN;
writeb_relaxed(gpioreg, gpio->base + gpio->gpio_data->offsets[offset]);
return 0;
}
static int msc313_gpio_direction_output(struct gpio_chip *chip, unsigned int offset, int value)
{
struct msc313_gpio *gpio = gpiochip_get_data(chip);
u8 gpioreg = readb_relaxed(gpio->base + gpio->gpio_data->offsets[offset]);
gpioreg &= ~MSC313_GPIO_OEN;
if (value)
gpioreg |= MSC313_GPIO_OUT;
else
gpioreg &= ~MSC313_GPIO_OUT;
writeb_relaxed(gpioreg, gpio->base + gpio->gpio_data->offsets[offset]);
return 0;
}
static void msc313_gpio_irq_mask(struct irq_data *d)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
irq_chip_mask_parent(d);
gpiochip_disable_irq(gc, d->hwirq);
}
static void msc313_gpio_irq_unmask(struct irq_data *d)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
gpiochip_enable_irq(gc, d->hwirq);
irq_chip_unmask_parent(d);
}
/*
* The interrupt handling happens in the parent interrupt controller,
* we don't do anything here.
*/
static const struct irq_chip msc313_gpio_irqchip = {
.name = "GPIO",
.irq_eoi = irq_chip_eoi_parent,
.irq_mask = msc313_gpio_irq_mask,
.irq_unmask = msc313_gpio_irq_unmask,
.irq_set_type = irq_chip_set_type_parent,
.irq_set_affinity = irq_chip_set_affinity_parent,
.flags = IRQCHIP_IMMUTABLE,
GPIOCHIP_IRQ_RESOURCE_HELPERS,
};
/*
* The parent interrupt controller needs the GIC interrupt type set to GIC_SPI
* so we need to provide the fwspec. Essentially gpiochip_populate_parent_fwspec_twocell
* that puts GIC_SPI into the first cell.
*/
static int msc313_gpio_populate_parent_fwspec(struct gpio_chip *gc,
union gpio_irq_fwspec *gfwspec,
unsigned int parent_hwirq,
unsigned int parent_type)
{
struct irq_fwspec *fwspec = &gfwspec->fwspec;
fwspec->fwnode = gc->irq.parent_domain->fwnode;
fwspec->param_count = 3;
fwspec->param[0] = GIC_SPI;
fwspec->param[1] = parent_hwirq;
fwspec->param[2] = parent_type;
return 0;
}
static int msc313e_gpio_child_to_parent_hwirq(struct gpio_chip *chip,
unsigned int child,
unsigned int child_type,
unsigned int *parent,
unsigned int *parent_type)
{
struct msc313_gpio *priv = gpiochip_get_data(chip);
unsigned int offset = priv->gpio_data->offsets[child];
/*
* only the spi0 pins have interrupts on the parent
* on all of the known chips and so far they are all
* mapped to the same place
*/
if (offset >= OFF_SPI0_CZ && offset <= OFF_SPI0_DO) {
*parent_type = child_type;
*parent = ((offset - OFF_SPI0_CZ) >> 2) + 28;
return 0;
}
return -EINVAL;
}
static int msc313_gpio_probe(struct platform_device *pdev)
{
const struct msc313_gpio_data *match_data;
struct msc313_gpio *gpio;
struct gpio_chip *gpiochip;
struct gpio_irq_chip *gpioirqchip;
struct irq_domain *parent_domain;
struct device_node *parent_node;
struct device *dev = &pdev->dev;
match_data = of_device_get_match_data(dev);
if (!match_data)
return -EINVAL;
parent_node = of_irq_find_parent(dev->of_node);
if (!parent_node)
return -ENODEV;
parent_domain = irq_find_host(parent_node);
if (!parent_domain)
return -ENODEV;
gpio = devm_kzalloc(dev, sizeof(*gpio), GFP_KERNEL);
if (!gpio)
return -ENOMEM;
gpio->gpio_data = match_data;
gpio->saved = devm_kcalloc(dev, gpio->gpio_data->num, sizeof(*gpio->saved), GFP_KERNEL);
if (!gpio->saved)
return -ENOMEM;
gpio->base = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(gpio->base))
return PTR_ERR(gpio->base);
platform_set_drvdata(pdev, gpio);
gpiochip = devm_kzalloc(dev, sizeof(*gpiochip), GFP_KERNEL);
if (!gpiochip)
return -ENOMEM;
gpiochip->label = DRIVER_NAME;
gpiochip->parent = dev;
gpiochip->request = gpiochip_generic_request;
gpiochip->free = gpiochip_generic_free;
gpiochip->direction_input = msc313_gpio_direction_input;
gpiochip->direction_output = msc313_gpio_direction_output;
gpiochip->get = msc313_gpio_get;
gpiochip->set = msc313_gpio_set;
gpiochip->base = -1;
gpiochip->ngpio = gpio->gpio_data->num;
gpiochip->names = gpio->gpio_data->names;
gpioirqchip = &gpiochip->irq;
gpio_irq_chip_set_chip(gpioirqchip, &msc313_gpio_irqchip);
gpioirqchip->fwnode = dev_fwnode(dev);
gpioirqchip->parent_domain = parent_domain;
gpioirqchip->child_to_parent_hwirq = msc313e_gpio_child_to_parent_hwirq;
gpioirqchip->populate_parent_alloc_arg = msc313_gpio_populate_parent_fwspec;
gpioirqchip->handler = handle_bad_irq;
gpioirqchip->default_type = IRQ_TYPE_NONE;
return devm_gpiochip_add_data(dev, gpiochip, gpio);
}
static const struct of_device_id msc313_gpio_of_match[] = {
#ifdef CONFIG_MACH_INFINITY
{
.compatible = "mstar,msc313-gpio",
.data = &msc313_data,
},
{
.compatible = "sstar,ssd20xd-gpio",
.data = &ssd20xd_data,
},
#endif
{ }
};
/*
* The GPIO controller loses the state of the registers when the
* SoC goes into suspend to memory mode so we need to save some
* of the register bits before suspending and put it back when resuming
*/
static int __maybe_unused msc313_gpio_suspend(struct device *dev)
{
struct msc313_gpio *gpio = dev_get_drvdata(dev);
int i;
for (i = 0; i < gpio->gpio_data->num; i++)
gpio->saved[i] = readb_relaxed(gpio->base + gpio->gpio_data->offsets[i]) & MSC313_GPIO_BITSTOSAVE;
return 0;
}
static int __maybe_unused msc313_gpio_resume(struct device *dev)
{
struct msc313_gpio *gpio = dev_get_drvdata(dev);
int i;
for (i = 0; i < gpio->gpio_data->num; i++)
writeb_relaxed(gpio->saved[i], gpio->base + gpio->gpio_data->offsets[i]);
return 0;
}
static SIMPLE_DEV_PM_OPS(msc313_gpio_ops, msc313_gpio_suspend, msc313_gpio_resume);
static struct platform_driver msc313_gpio_driver = {
.driver = {
.name = DRIVER_NAME,
.of_match_table = msc313_gpio_of_match,
.pm = &msc313_gpio_ops,
},
.probe = msc313_gpio_probe,
};
builtin_platform_driver(msc313_gpio_driver);
Codebase Browser
linux