What: /sys/bus/rapidio/devices/<nn>:<d>:<iiii>
Description:
For each RapidIO device, the RapidIO subsystem creates files in
an individual subdirectory with the following name format of
device_name "nn:d:iiii", where:
==== ========================================================
nn two-digit hexadecimal ID of RapidIO network where the
device resides
d device type: 'e' - for endpoint or 's' - for switch
iiii four-digit device destID for endpoints, or switchID for
switches
==== ========================================================
For example, below is a list of device directories that
represents a typical RapidIO network with one switch, one host,
and two agent endpoints, as it is seen by the enumerating host
(with destID = 1)::
/sys/bus/rapidio/devices/00:e:0000
/sys/bus/rapidio/devices/00:e:0002
/sys/bus/rapidio/devices/00:s:0001
NOTE:
An enumerating or discovering endpoint does not create a
sysfs entry for itself, this is why an endpoint with destID=1
is not shown in the list.
Attributes Common for All RapidIO Devices
-----------------------------------------
What: /sys/bus/rapidio/devices/<nn>:<d>:<iiii>/did
Date: Nov, 2005
KernelVersion: v2.6.15
Contact: Matt Porter <[email protected]>,
Alexandre Bounine <[email protected]>
Description:
(RO) returns the device identifier
What: /sys/bus/rapidio/devices/<nn>:<d>:<iiii>/vid
Date: Nov, 2005
KernelVersion: v2.6.15
Contact: Matt Porter <[email protected]>,
Alexandre Bounine <[email protected]>
Description:
(RO) returns the device vendor identifier
What: /sys/bus/rapidio/devices/<nn>:<d>:<iiii>/device_rev
Date: Nov, 2005
KernelVersion: v2.6.15
Contact: Matt Porter <[email protected]>,
Alexandre Bounine <[email protected]>
Description:
(RO) returns the device revision level
What: /sys/bus/rapidio/devices/<nn>:<d>:<iiii>/asm_did
Date: Nov, 2005
KernelVersion: v2.6.15
Contact: Matt Porter <[email protected]>,
Alexandre Bounine <[email protected]>
Description:
(RO) returns identifier for the assembly containing the device
What: /sys/bus/rapidio/devices/<nn>:<d>:<iiii>/asm_rev
Date: Nov, 2005
KernelVersion: v2.6.15
Contact: Matt Porter <[email protected]>,
Alexandre Bounine <[email protected]>
Description:
(RO) returns revision level of the assembly containing the
device
What: /sys/bus/rapidio/devices/<nn>:<d>:<iiii>/asm_vid
Date: Nov, 2005
KernelVersion: v2.6.15
Contact: Matt Porter <[email protected]>,
Alexandre Bounine <[email protected]>
Description:
(RO) returns vendor identifier of the assembly containing the
device
What: /sys/bus/rapidio/devices/<nn>:<d>:<iiii>/destid
Date: Mar, 2011
KernelVersion: v2.6.3
Contact: Matt Porter <[email protected]>,
Alexandre Bounine <[email protected]>
Description:
(RO) returns device destination ID assigned by the enumeration
routine
What: /sys/bus/rapidio/devices/<nn>:<d>:<iiii>/lprev
Date: Mar, 2011
KernelVersion: v2.6.39
Contact: Matt Porter <[email protected]>,
Alexandre Bounine <[email protected]>
Description:
(RO) returns name of previous device (switch) on the path to the
device that that owns this attribute
What: /sys/bus/rapidio/devices/<nn>:<d>:<iiii>/modalias
Date: Jul, 2013
KernelVersion: v3.11
Contact: Matt Porter <[email protected]>,
Alexandre Bounine <[email protected]>
Description:
(RO) returns the device modalias
What: /sys/bus/rapidio/devices/<nn>:<d>:<iiii>/config
Date: Nov, 2005
KernelVersion: v2.6.15
Contact: Matt Porter <[email protected]>,
Alexandre Bounine <[email protected]>
Description:
(RW) Binary attribute to read from and write to the device
configuration registers using the RapidIO maintenance
transactions. This attribute is similar in behaviour to the
"config" attribute of PCI devices and provides an access to the
RapidIO device registers using standard file read and write
operations.
RapidIO Switch Device Attributes
--------------------------------
RapidIO switches have additional attributes in sysfs. RapidIO subsystem supports
common and device-specific sysfs attributes for switches. Because switches are
integrated into the RapidIO subsystem, it offers a method to create
device-specific sysfs attributes by specifying a callback function that may be
set by the switch initialization routine during enumeration or discovery
process.
What: /sys/bus/rapidio/devices/<nn>:<s>:<iiii>/routes
Date: Nov, 2005
KernelVersion: v2.6.15
Contact: Matt Porter <[email protected]>,
Alexandre Bounine <[email protected]>
Description:
(RO) reports switch routing information in "destID port" format.
This attribute reports only valid routing table entries, one
line for each entry.
What: /sys/bus/rapidio/devices/<nn>:<s>:<iiii>/destid
Date: Mar, 2011
KernelVersion: v2.6.3
Contact: Matt Porter <[email protected]>,
Alexandre Bounine <[email protected]>
Description:
(RO) device destination ID of the associated device that defines
a route to the switch
What: /sys/bus/rapidio/devices/<nn>:<s>:<iiii>/hopcount
Date: Mar, 2011
KernelVersion: v2.6.39
Contact: Matt Porter <[email protected]>,
Alexandre Bounine <[email protected]>
Description:
(RO) number of hops on the path to the switch
What: /sys/bus/rapidio/devices/<nn>:<s>:<iiii>/lnext
Date: Mar, 2011
KernelVersion: v2.6.39
Contact: Matt Porter <[email protected]>,
Alexandre Bounine <[email protected]>
Description:
(RO) returns names of devices linked to the switch except one of
a device linked to the ingress port (reported as "lprev"). This
is an array names with number of lines equal to number of ports
in switch. If a switch port has no attached device, returns
"null" instead of a device name.
Device-specific Switch Attributes
---------------------------------
IDT_GEN2-
What: /sys/bus/rapidio/devices/<nn>:<s>:<iiii>/errlog
Date: Oct, 2010
KernelVersion: v2.6.37
Contact: Matt Porter <[email protected]>,
Alexandre Bounine <[email protected]>
Description:
(RO) reads contents of device error log until it is empty.
RapidIO Bus Attributes
----------------------
What: /sys/bus/rapidio/scan
Date: May, 2013
KernelVersion: v3.11
Contact: Matt Porter <[email protected]>,
Alexandre Bounine <[email protected]>
Description:
(WO) Allows to trigger enumeration discovery process from user
space. To initiate an enumeration or discovery process on
specific mport device, a user needs to write mport_ID (not
RapidIO destination ID) into this file. The mport_ID is a
sequential number (0 ... RIO_MAX_MPORTS) assigned to the mport
device. For example, for a machine with a single RapidIO
controller, mport_ID for that controller always will be 0. To
initiate RapidIO enumeration/discovery on all available mports a
user must write '-1' (or RIO_MPORT_ANY) into this attribute
file.
Codebase Browser
linux