# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
%YAML 1.2
---
$id: http://devicetree.org/schemas/phy/samsung,usb3-drd-phy.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Samsung Exynos SoC USB 3.0 DRD PHY USB 2.0 PHY
maintainers:
- Krzysztof Kozlowski <[email protected]>
- Marek Szyprowski <[email protected]>
- Sylwester Nawrocki <[email protected]>
description: |
For samsung,exynos5250-usbdrd-phy and samsung,exynos5420-usbdrd-phy
compatible PHYs, the second cell in the PHY specifier identifies the
PHY id, which is interpreted as follows::
0 - UTMI+ type phy,
1 - PIPE3 type phy.
For SoCs like Exynos5420 having multiple USB 3.0 DRD PHY controllers,
'usbdrd_phy' nodes should have numbered alias in the aliases node, in the
form of usbdrdphyN, N = 0, 1... (depending on number of controllers).
properties:
compatible:
enum:
- google,gs101-usb31drd-phy
- samsung,exynos5250-usbdrd-phy
- samsung,exynos5420-usbdrd-phy
- samsung,exynos5433-usbdrd-phy
- samsung,exynos7-usbdrd-phy
- samsung,exynos850-usbdrd-phy
clocks:
minItems: 2
maxItems: 5
clock-names:
minItems: 2
maxItems: 5
description: |
At least two clocks::
- Main PHY clock (same as USB DRD controller i.e. DWC3 IP clock), used
for register access.
- PHY reference clock (usually crystal clock), used for PHY operations,
associated by phy name. It is used to determine bit values for clock
settings register. For Exynos5420 this is given as 'sclk_usbphy30'
in the CMU.
"#phy-cells":
const: 1
port:
$ref: /schemas/graph.yaml#/properties/port
description:
Any connector to the data bus of this controller should be modelled using
the OF graph bindings specified.
reg:
minItems: 1
maxItems: 3
reg-names:
minItems: 1
items:
- const: phy
- const: pcs
- const: pma
samsung,pmu-syscon:
$ref: /schemas/types.yaml#/definitions/phandle
description:
Phandle to PMU system controller interface.
vbus-supply:
description:
VBUS power source.
vbus-boost-supply:
description:
VBUS Boost 5V power source.
pll-supply:
description: Power supply for the USB PLL.
dvdd-usb20-supply:
description: DVDD power supply for the USB 2.0 phy.
vddh-usb20-supply:
description: VDDh power supply for the USB 2.0 phy.
vdd33-usb20-supply:
description: 3.3V power supply for the USB 2.0 phy.
vdda-usbdp-supply:
description: VDDa power supply for the USB DP phy.
vddh-usbdp-supply:
description: VDDh power supply for the USB DP phy.
required:
- compatible
- clocks
- clock-names
- "#phy-cells"
- reg
- samsung,pmu-syscon
allOf:
- if:
properties:
compatible:
contains:
const: google,gs101-usb31drd-phy
then:
properties:
clocks:
items:
- description: Gate of main PHY clock
- description: Gate of PHY reference clock
- description: Gate of control interface AXI clock
- description: Gate of control interface APB clock
- description: Gate of SCL APB clock
clock-names:
items:
- const: phy
- const: ref
- const: ctrl_aclk
- const: ctrl_pclk
- const: scl_pclk
reg:
minItems: 3
reg-names:
minItems: 3
required:
- reg-names
- pll-supply
- dvdd-usb20-supply
- vddh-usb20-supply
- vdd33-usb20-supply
- vdda-usbdp-supply
- vddh-usbdp-supply
- if:
properties:
compatible:
contains:
enum:
- samsung,exynos5433-usbdrd-phy
- samsung,exynos7-usbdrd-phy
then:
properties:
clocks:
minItems: 5
maxItems: 5
clock-names:
items:
- const: phy
- const: ref
- const: phy_utmi
- const: phy_pipe
- const: itp
reg:
maxItems: 1
reg-names:
maxItems: 1
- if:
properties:
compatible:
contains:
enum:
- samsung,exynos5250-usbdrd-phy
- samsung,exynos5420-usbdrd-phy
- samsung,exynos850-usbdrd-phy
then:
properties:
clocks:
minItems: 2
maxItems: 2
clock-names:
items:
- const: phy
- const: ref
reg:
maxItems: 1
reg-names:
maxItems: 1
additionalProperties: false
examples:
- |
#include <dt-bindings/clock/exynos5420.h>
phy@12100000 {
compatible = "samsung,exynos5420-usbdrd-phy";
reg = <0x12100000 0x100>;
#phy-cells = <1>;
clocks = <&clock CLK_USBD300>, <&clock CLK_SCLK_USBPHY300>;
clock-names = "phy", "ref";
samsung,pmu-syscon = <&pmu_system_controller>;
vbus-supply = <&usb300_vbus_reg>;
};
Codebase Browser
linux