# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/iio/adc/adi,ad4695.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Analog Devices Easy Drive Multiplexed SAR Analog to Digital Converters
maintainers:
- Michael Hennerich <[email protected]>
- Nuno Sá <[email protected]>
description: |
A family of similar multi-channel analog to digital converters with SPI bus.
* https://www.analog.com/en/products/ad4695.html
* https://www.analog.com/en/products/ad4696.html
* https://www.analog.com/en/products/ad4697.html
* https://www.analog.com/en/products/ad4698.html
$ref: /schemas/spi/spi-peripheral-props.yaml#
properties:
compatible:
enum:
- adi,ad4695
- adi,ad4696
- adi,ad4697
- adi,ad4698
reg:
maxItems: 1
spi-max-frequency:
maximum: 80000000
spi-cpol: true
spi-cpha: true
spi-rx-bus-width:
minimum: 1
maximum: 4
avdd-supply:
description: Analog power supply.
vio-supply:
description: I/O pin power supply.
ldo-in-supply:
description: Internal LDO Input. Mutually exclusive with vdd-supply.
vdd-supply:
description: Core power supply. Mutually exclusive with ldo-in-supply.
ref-supply:
description:
External reference voltage. Mutually exclusive with refin-supply.
refin-supply:
description:
Internal reference buffer input. Mutually exclusive with ref-supply.
com-supply:
description: Common voltage supply for pseudo-differential analog inputs.
adi,no-ref-current-limit:
$ref: /schemas/types.yaml#/definitions/flag
description:
When this flag is present, the REF Overvoltage Reduced Current protection
is disabled.
adi,no-ref-high-z:
$ref: /schemas/types.yaml#/definitions/flag
description:
Enable this flag if the ref-supply requires Reference Input High-Z Mode
to be disabled for proper operation.
cnv-gpios:
description: The Convert Input (CNV). If omitted, CNV is tied to SPI CS.
maxItems: 1
reset-gpios:
description: The Reset Input (RESET). Should be configured GPIO_ACTIVE_LOW.
maxItems: 1
interrupts:
minItems: 1
items:
- description: Signal coming from the BSY_ALT_GP0 pin (ALERT or BUSY).
- description: Signal coming from the GP2 pin (ALERT).
- description: Signal coming from the GP3 pin (BUSY).
interrupt-names:
minItems: 1
items:
- const: gp0
- const: gp2
- const: gp3
gpio-controller: true
"#gpio-cells":
const: 2
description: |
The first cell is the GPn number: 0 to 3.
The second cell takes standard GPIO flags.
"#address-cells":
const: 1
"#size-cells":
const: 0
patternProperties:
"^in(?:[13579]|1[135])-supply$":
description:
Optional voltage supply for odd numbered channels when they are used as
the negative input for a pseudo-differential channel.
"^channel@[0-9a-f]$":
type: object
$ref: adc.yaml
unevaluatedProperties: false
description:
Describes each individual channel. In addition the properties defined
below, bipolar from adc.yaml is also supported.
properties:
reg:
maximum: 15
common-mode-channel:
description:
Describes the common mode channel for single channels. 0xFF is REFGND
and OxFE is COM. Macros are available for these values in
dt-bindings/iio/adi,ad4695.h. Values 1 to 15 correspond to INx inputs.
Only odd numbered INx inputs can be used as common mode channels.
enum: [1, 3, 5, 7, 9, 11, 13, 15, 0xFE, 0xFF]
default: 0xFF
adi,no-high-z:
$ref: /schemas/types.yaml#/definitions/flag
description:
Enable this flag if the input pin requires the Analog Input High-Z
Mode to be disabled for proper operation.
required:
- reg
allOf:
# bipolar mode can't be used with REFGND
- if:
properties:
common-mode-channel:
const: 0xFF
then:
properties:
bipolar: false
required:
- compatible
- reg
- avdd-supply
- vio-supply
allOf:
- oneOf:
- required:
- ldo-in-supply
- required:
- vdd-supply
- oneOf:
- required:
- ref-supply
- required:
- refin-supply
# the internal reference buffer always requires high-z mode
- if:
required:
- refin-supply
then:
properties:
adi,no-ref-high-z: false
# limit channels for 8-channel chips
- if:
properties:
compatible:
contains:
enum:
- adi,ad4697
- adi,ad4698
then:
patternProperties:
"^in(?:9|1[135])-supply$": false
"^channel@[0-7]$":
properties:
reg:
maximum: 7
common-mode-channel:
enum: [1, 3, 5, 7, 0xFE, 0xFF]
"^channel@[8-9a-f]$": false
unevaluatedProperties: false
examples:
- |
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/iio/adi,ad4695.h>
spi {
#address-cells = <1>;
#size-cells = <0>;
adc@0 {
compatible = "adi,ad4695";
reg = <0>;
spi-cpol;
spi-cpha;
spi-max-frequency = <80000000>;
avdd-supply = <&power_supply>;
ldo-in-supply = <&power_supply>;
vio-supply = <&io_supply>;
refin-supply = <&supply_5V>;
com-supply = <&supply_2V5>;
in3-supply = <&supply_2V5>;
reset-gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
#address-cells = <1>;
#size-cells = <0>;
/* Pseudo-differential channel between IN0 and REFGND. */
channel@0 {
reg = <0>;
};
/* Pseudo-differential channel between IN1 and COM. */
channel@1 {
reg = <1>;
common-mode-channel = <AD4695_COMMON_MODE_COM>;
bipolar;
};
/* Pseudo-differential channel between IN2 and IN3. */
channel@2 {
reg = <2>;
common-mode-channel = <3>;
bipolar;
};
};
};
Codebase Browser
linux