linux/Documentation/devicetree/bindings/pinctrl/qcom,ipq8064-pinctrl.yaml

# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/pinctrl/qcom,ipq8064-pinctrl.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Qualcomm Technologies, Inc. IPQ8064 TLMM block

maintainers:
  - Bjorn Andersson <[email protected]>

description: |
  Top Level Mode Multiplexer pin controller in Qualcomm IPQ8064 SoC.

allOf:
  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#

properties:
  compatible:
    const: qcom,ipq8064-pinctrl

  reg:
    maxItems: 1

  interrupts:
    maxItems: 1

  gpio-reserved-ranges: true

patternProperties:
  "-state$":
    oneOf:
      - $ref: "#/$defs/qcom-ipq8064-tlmm-state"
      - patternProperties:
          "-pins$":
            $ref: "#/$defs/qcom-ipq8064-tlmm-state"
        additionalProperties: false

$defs:
  qcom-ipq8064-tlmm-state:
    type: object
    description:
      Pinctrl node's client devices use subnodes for desired pin configuration.
      Client device subnodes use below standard properties.
    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
    unevaluatedProperties: false

    properties:
      pins:
        description:
          List of gpio pins affected by the properties specified in this
          subnode.
        items:
          oneOf:
            - pattern: "^gpio([0-9]|[1-5][0-9]|6[0-8])$"
            - enum: [ sdc3_clk, sdc3_cmd, sdc3_data ]
        minItems: 1
        maxItems: 36

      function:
        description:
          Specify the alternative function to be configured for the specified
          pins.
        enum: [ mdio, mi2s, pdm, ssbi, spmi, audio_pcm, gpio, gsbi1, gsbi2, gsbi4, gsbi5,
                gsbi5_spi_cs1, gsbi5_spi_cs2, gsbi5_spi_cs3, gsbi6, gsbi7, nss_spi, sdc1,
                spdif, nand, tsif1, tsif2, usb_fs_n, usb_fs, usb2_hsic, rgmii2, sata,
                pcie1_rst, pcie1_prsnt, pcie1_pwren_n, pcie1_pwren, pcie1_pwrflt,
                pcie1_clk_req, pcie2_rst, pcie2_prsnt, pcie2_pwren_n, pcie2_pwren,
                pcie2_pwrflt, pcie2_clk_req, pcie3_rst, pcie3_prsnt, pcie3_pwren_n,
                pcie3_pwren, pcie3_pwrflt, pcie3_clk_req, ps_hold ]

    required:
      - pins

required:
  - compatible
  - reg

unevaluatedProperties: false

examples:
  - |
    #include <dt-bindings/interrupt-controller/arm-gic.h>
    tlmm: pinctrl@800000 {
        compatible = "qcom,ipq8064-pinctrl";
        reg = <0x00800000 0x4000>;

        gpio-controller;
        #gpio-cells = <2>;
        gpio-ranges = <&tlmm 0 0 69>;
        interrupt-controller;
        #interrupt-cells = <2>;
        interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;

        uart-state {
            rx-pins {
                pins = "gpio19";
                function = "gsbi5";
                bias-pull-up;
            };

            tx-pins {
                pins = "gpio18";
                function = "gsbi5";
                bias-disable;
            };
        };
    };