/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (c) 2022, Linaro Ltd.
*
*/
#ifndef _MHI_EP_H_
#define _MHI_EP_H_
#include <linux/dma-direction.h>
#include <linux/mhi.h>
#define MHI_EP_DEFAULT_MTU 0x8000
/**
* struct mhi_ep_channel_config - Channel configuration structure for controller
* @name: The name of this channel
* @num: The number assigned to this channel
* @num_elements: The number of elements that can be queued to this channel
* @dir: Direction that data may flow on this channel
*/
struct mhi_ep_channel_config {
char *name;
u32 num;
u32 num_elements;
enum dma_data_direction dir;
};
/**
* struct mhi_ep_cntrl_config - MHI Endpoint controller configuration
* @mhi_version: MHI spec version supported by the controller
* @max_channels: Maximum number of channels supported
* @num_channels: Number of channels defined in @ch_cfg
* @ch_cfg: Array of defined channels
*/
struct mhi_ep_cntrl_config {
u32 mhi_version;
u32 max_channels;
u32 num_channels;
const struct mhi_ep_channel_config *ch_cfg;
};
/**
* struct mhi_ep_db_info - MHI Endpoint doorbell info
* @mask: Mask of the doorbell interrupt
* @status: Status of the doorbell interrupt
*/
struct mhi_ep_db_info {
u32 mask;
u32 status;
};
/**
* struct mhi_ep_buf_info - MHI Endpoint transfer buffer info
* @mhi_dev: MHI device associated with this buffer
* @dev_addr: Address of the buffer in endpoint
* @host_addr: Address of the bufffer in host
* @size: Size of the buffer
* @code: Transfer completion code
* @cb: Callback to be executed by controller drivers after transfer completion (async)
* @cb_buf: Opaque buffer to be passed to the callback
*/
struct mhi_ep_buf_info {
struct mhi_ep_device *mhi_dev;
void *dev_addr;
u64 host_addr;
size_t size;
int code;
void (*cb)(struct mhi_ep_buf_info *buf_info);
void *cb_buf;
};
/**
* struct mhi_ep_cntrl - MHI Endpoint controller structure
* @cntrl_dev: Pointer to the struct device of physical bus acting as the MHI
* Endpoint controller
* @mhi_dev: MHI Endpoint device instance for the controller
* @mmio: MMIO region containing the MHI registers
* @mhi_chan: Points to the channel configuration table
* @mhi_event: Points to the event ring configurations table
* @mhi_cmd: Points to the command ring configurations table
* @sm: MHI Endpoint state machine
* @ch_ctx_cache: Cache of host channel context data structure
* @ev_ctx_cache: Cache of host event context data structure
* @cmd_ctx_cache: Cache of host command context data structure
* @ch_ctx_host_pa: Physical address of host channel context data structure
* @ev_ctx_host_pa: Physical address of host event context data structure
* @cmd_ctx_host_pa: Physical address of host command context data structure
* @ch_ctx_cache_phys: Physical address of the host channel context cache
* @ev_ctx_cache_phys: Physical address of the host event context cache
* @cmd_ctx_cache_phys: Physical address of the host command context cache
* @chdb: Array of channel doorbell interrupt info
* @event_lock: Lock for protecting event rings
* @state_lock: Lock for protecting state transitions
* @list_lock: Lock for protecting state transition and channel doorbell lists
* @st_transition_list: List of state transitions
* @ch_db_list: List of queued channel doorbells
* @wq: Dedicated workqueue for handling rings and state changes
* @state_work: State transition worker
* @reset_work: Worker for MHI Endpoint reset
* @cmd_ring_work: Worker for processing command rings
* @ch_ring_work: Worker for processing channel rings
* @raise_irq: CB function for raising IRQ to the host
* @alloc_map: CB function for allocating memory in endpoint for storing host context and mapping it
* @unmap_free: CB function to unmap and free the allocated memory in endpoint for storing host context
* @read_sync: CB function for reading from host memory synchronously
* @write_sync: CB function for writing to host memory synchronously
* @read_async: CB function for reading from host memory asynchronously
* @write_async: CB function for writing to host memory asynchronously
* @mhi_state: MHI Endpoint state
* @max_chan: Maximum channels supported by the endpoint controller
* @mru: MRU (Maximum Receive Unit) value of the endpoint controller
* @event_rings: Number of event rings supported by the endpoint controller
* @hw_event_rings: Number of hardware event rings supported by the endpoint controller
* @chdb_offset: Channel doorbell offset set by the host
* @erdb_offset: Event ring doorbell offset set by the host
* @index: MHI Endpoint controller index
* @irq: IRQ used by the endpoint controller
* @enabled: Check if the endpoint controller is enabled or not
*/
struct mhi_ep_cntrl {
struct device *cntrl_dev;
struct mhi_ep_device *mhi_dev;
void __iomem *mmio;
struct mhi_ep_chan *mhi_chan;
struct mhi_ep_event *mhi_event;
struct mhi_ep_cmd *mhi_cmd;
struct mhi_ep_sm *sm;
struct mhi_chan_ctxt *ch_ctx_cache;
struct mhi_event_ctxt *ev_ctx_cache;
struct mhi_cmd_ctxt *cmd_ctx_cache;
u64 ch_ctx_host_pa;
u64 ev_ctx_host_pa;
u64 cmd_ctx_host_pa;
phys_addr_t ch_ctx_cache_phys;
phys_addr_t ev_ctx_cache_phys;
phys_addr_t cmd_ctx_cache_phys;
struct mhi_ep_db_info chdb[4];
struct mutex event_lock;
struct mutex state_lock;
spinlock_t list_lock;
struct list_head st_transition_list;
struct list_head ch_db_list;
struct workqueue_struct *wq;
struct work_struct state_work;
struct work_struct reset_work;
struct work_struct cmd_ring_work;
struct work_struct ch_ring_work;
struct kmem_cache *ring_item_cache;
struct kmem_cache *ev_ring_el_cache;
struct kmem_cache *tre_buf_cache;
void (*raise_irq)(struct mhi_ep_cntrl *mhi_cntrl, u32 vector);
int (*alloc_map)(struct mhi_ep_cntrl *mhi_cntrl, u64 pci_addr, phys_addr_t *phys_ptr,
void __iomem **virt, size_t size);
void (*unmap_free)(struct mhi_ep_cntrl *mhi_cntrl, u64 pci_addr, phys_addr_t phys,
void __iomem *virt, size_t size);
int (*read_sync)(struct mhi_ep_cntrl *mhi_cntrl, struct mhi_ep_buf_info *buf_info);
int (*write_sync)(struct mhi_ep_cntrl *mhi_cntrl, struct mhi_ep_buf_info *buf_info);
int (*read_async)(struct mhi_ep_cntrl *mhi_cntrl, struct mhi_ep_buf_info *buf_info);
int (*write_async)(struct mhi_ep_cntrl *mhi_cntrl, struct mhi_ep_buf_info *buf_info);
enum mhi_state mhi_state;
u32 max_chan;
u32 mru;
u32 event_rings;
u32 hw_event_rings;
u32 chdb_offset;
u32 erdb_offset;
u32 index;
int irq;
bool enabled;
};
/**
* struct mhi_ep_device - Structure representing an MHI Endpoint device that binds
* to channels or is associated with controllers
* @dev: Driver model device node for the MHI Endpoint device
* @mhi_cntrl: Controller the device belongs to
* @id: Pointer to MHI Endpoint device ID struct
* @name: Name of the associated MHI Endpoint device
* @ul_chan: UL (from host to endpoint) channel for the device
* @dl_chan: DL (from endpoint to host) channel for the device
* @dev_type: MHI device type
*/
struct mhi_ep_device {
struct device dev;
struct mhi_ep_cntrl *mhi_cntrl;
const struct mhi_device_id *id;
const char *name;
struct mhi_ep_chan *ul_chan;
struct mhi_ep_chan *dl_chan;
enum mhi_device_type dev_type;
};
/**
* struct mhi_ep_driver - Structure representing a MHI Endpoint client driver
* @id_table: Pointer to MHI Endpoint device ID table
* @driver: Device driver model driver
* @probe: CB function for client driver probe function
* @remove: CB function for client driver remove function
* @ul_xfer_cb: CB function for UL (from host to endpoint) data transfer
* @dl_xfer_cb: CB function for DL (from endpoint to host) data transfer
*/
struct mhi_ep_driver {
const struct mhi_device_id *id_table;
struct device_driver driver;
int (*probe)(struct mhi_ep_device *mhi_ep,
const struct mhi_device_id *id);
void (*remove)(struct mhi_ep_device *mhi_ep);
void (*ul_xfer_cb)(struct mhi_ep_device *mhi_dev,
struct mhi_result *result);
void (*dl_xfer_cb)(struct mhi_ep_device *mhi_dev,
struct mhi_result *result);
};
#define to_mhi_ep_device(dev) container_of(dev, struct mhi_ep_device, dev)
#define to_mhi_ep_driver(drv) container_of_const(drv, struct mhi_ep_driver, driver)
/*
* module_mhi_ep_driver() - Helper macro for drivers that don't do
* anything special other than using default mhi_ep_driver_register() and
* mhi_ep_driver_unregister(). This eliminates a lot of boilerplate.
* Each module may only use this macro once.
*/
#define module_mhi_ep_driver(mhi_drv) \
module_driver(mhi_drv, mhi_ep_driver_register, \
mhi_ep_driver_unregister)
/*
* Macro to avoid include chaining to get THIS_MODULE
*/
#define mhi_ep_driver_register(mhi_drv) \
__mhi_ep_driver_register(mhi_drv, THIS_MODULE)
/**
* __mhi_ep_driver_register - Register a driver with MHI Endpoint bus
* @mhi_drv: Driver to be associated with the device
* @owner: The module owner
*
* Return: 0 if driver registrations succeeds, a negative error code otherwise.
*/
int __mhi_ep_driver_register(struct mhi_ep_driver *mhi_drv, struct module *owner);
/**
* mhi_ep_driver_unregister - Unregister a driver from MHI Endpoint bus
* @mhi_drv: Driver associated with the device
*/
void mhi_ep_driver_unregister(struct mhi_ep_driver *mhi_drv);
/**
* mhi_ep_register_controller - Register MHI Endpoint controller
* @mhi_cntrl: MHI Endpoint controller to register
* @config: Configuration to use for the controller
*
* Return: 0 if controller registrations succeeds, a negative error code otherwise.
*/
int mhi_ep_register_controller(struct mhi_ep_cntrl *mhi_cntrl,
const struct mhi_ep_cntrl_config *config);
/**
* mhi_ep_unregister_controller - Unregister MHI Endpoint controller
* @mhi_cntrl: MHI Endpoint controller to unregister
*/
void mhi_ep_unregister_controller(struct mhi_ep_cntrl *mhi_cntrl);
/**
* mhi_ep_power_up - Power up the MHI endpoint stack
* @mhi_cntrl: MHI Endpoint controller
*
* Return: 0 if power up succeeds, a negative error code otherwise.
*/
int mhi_ep_power_up(struct mhi_ep_cntrl *mhi_cntrl);
/**
* mhi_ep_power_down - Power down the MHI endpoint stack
* @mhi_cntrl: MHI controller
*/
void mhi_ep_power_down(struct mhi_ep_cntrl *mhi_cntrl);
/**
* mhi_ep_queue_is_empty - Determine whether the transfer queue is empty
* @mhi_dev: Device associated with the channels
* @dir: DMA direction for the channel
*
* Return: true if the queue is empty, false otherwise.
*/
bool mhi_ep_queue_is_empty(struct mhi_ep_device *mhi_dev, enum dma_data_direction dir);
/**
* mhi_ep_queue_skb - Send SKBs to host over MHI Endpoint
* @mhi_dev: Device associated with the DL channel
* @skb: SKBs to be queued
*
* Return: 0 if the SKBs has been sent successfully, a negative error code otherwise.
*/
int mhi_ep_queue_skb(struct mhi_ep_device *mhi_dev, struct sk_buff *skb);
#endif
Codebase Browser
linux