/* SPDX-License-Identifier: MIT */
/*
* Copyright © 2023 Intel Corporation
*/
#ifndef __INTEL_LVDS_REGS_H__
#define __INTEL_LVDS_REGS_H__
#include "intel_display_reg_defs.h"
/* LVDS port control */
#define LVDS _MMIO(0x61180)
/*
* Enables the LVDS port. This bit must be set before DPLLs are enabled, as
* the DPLL semantics change when the LVDS is assigned to that pipe.
*/
#define LVDS_PORT_EN REG_BIT(31)
/* Selects pipe B for LVDS data. Must be set on pre-965. */
#define LVDS_PIPE_SEL_MASK REG_BIT(30)
#define LVDS_PIPE_SEL(pipe) REG_FIELD_PREP(LVDS_PIPE_SEL_MASK, (pipe))
#define LVDS_PIPE_SEL_MASK_CPT REG_GENMASK(30, 29)
#define LVDS_PIPE_SEL_CPT(pipe) REG_FIELD_PREP(LVDS_PIPE_SEL_MASK_CPT, (pipe))
/* LVDS dithering flag on 965/g4x platform */
#define LVDS_ENABLE_DITHER REG_BIT(25)
/* LVDS sync polarity flags. Set to invert (i.e. negative) */
#define LVDS_VSYNC_POLARITY REG_BIT(21)
#define LVDS_HSYNC_POLARITY REG_BIT(20)
/* Enable border for unscaled (or aspect-scaled) display */
#define LVDS_BORDER_ENABLE REG_BIT(15)
/*
* Enables the A0-A2 data pairs and CLKA, containing 18 bits of color data per
* pixel.
*/
#define LVDS_A0A2_CLKA_POWER_MASK REG_GENMASK(9, 8)
#define LVDS_A0A2_CLKA_POWER_DOWN REG_FIELD_PREP(LVDS_A0A2_CLKA_POWER_MASK, 0)
#define LVDS_A0A2_CLKA_POWER_UP REG_FIELD_PREP(LVDS_A0A2_CLKA_POWER_MASK, 3)
/*
* Controls the A3 data pair, which contains the additional LSBs for 24 bit
* mode. Only enabled if LVDS_A0A2_CLKA_POWER_UP also indicates it should be
* on.
*/
#define LVDS_A3_POWER_MASK REG_GENMASK(7, 6)
#define LVDS_A3_POWER_DOWN REG_FIELD_PREP(LVDS_A3_POWER_MASK, 0)
#define LVDS_A3_POWER_UP REG_FIELD_PREP(LVDS_A3_POWER_MASK, 3)
/*
* Controls the CLKB pair. This should only be set when LVDS_B0B3_POWER_UP
* is set.
*/
#define LVDS_CLKB_POWER_MASK REG_GENMASK(5, 4)
#define LVDS_CLKB_POWER_DOWN REG_FIELD_PREP(LVDS_CLKB_POWER_MASK, 0)
#define LVDS_CLKB_POWER_UP REG_FIELD_PREP(LVDS_CLKB_POWER_MASK, 3)
/*
* Controls the B0-B3 data pairs. This must be set to match the DPLL p2
* setting for whether we are in dual-channel mode. The B3 pair will
* additionally only be powered up when LVDS_A3_POWER_UP is set.
*/
#define LVDS_B0B3_POWER_MASK REG_GENMASK(3, 2)
#define LVDS_B0B3_POWER_DOWN REG_FIELD_PREP(LVDS_B0B3_POWER_MASK, 0)
#define LVDS_B0B3_POWER_UP REG_FIELD_PREP(LVDS_B0B3_POWER_MASK, 3)
#define PCH_LVDS _MMIO(0xe1180)
#define LVDS_DETECTED REG_BIT(1)
#endif /* __INTEL_LVDS_REGS_H__ */
Codebase Browser
linux