/* SPDX-License-Identifier: GPL-2.0 */
/*
* Hardware spinlock public header
*
* Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com
*
* Contact: Ohad Ben-Cohen <[email protected]>
*/
#ifndef __LINUX_HWSPINLOCK_H
#define __LINUX_HWSPINLOCK_H
#include <linux/err.h>
#include <linux/sched.h>
/* hwspinlock mode argument */
#define HWLOCK_IRQSTATE 0x01 /* Disable interrupts, save state */
#define HWLOCK_IRQ 0x02 /* Disable interrupts, don't save state */
#define HWLOCK_RAW 0x03
#define HWLOCK_IN_ATOMIC 0x04 /* Called while in atomic context */
struct device;
struct device_node;
struct hwspinlock;
struct hwspinlock_device;
struct hwspinlock_ops;
/**
* struct hwspinlock_pdata - platform data for hwspinlock drivers
* @base_id: base id for this hwspinlock device
*
* hwspinlock devices provide system-wide hardware locks that are used
* by remote processors that have no other way to achieve synchronization.
*
* To achieve that, each physical lock must have a system-wide id number
* that is agreed upon, otherwise remote processors can't possibly assume
* they're using the same hardware lock.
*
* Usually boards have a single hwspinlock device, which provides several
* hwspinlocks, and in this case, they can be trivially numbered 0 to
* (num-of-locks - 1).
*
* In case boards have several hwspinlocks devices, a different base id
* should be used for each hwspinlock device (they can't all use 0 as
* a starting id!).
*
* This platform data structure should be used to provide the base id
* for each device (which is trivially 0 when only a single hwspinlock
* device exists). It can be shared between different platforms, hence
* its location.
*/
struct hwspinlock_pdata {
int base_id;
};
#ifdef CONFIG_HWSPINLOCK
int hwspin_lock_register(struct hwspinlock_device *bank, struct device *dev,
const struct hwspinlock_ops *ops, int base_id, int num_locks);
int hwspin_lock_unregister(struct hwspinlock_device *bank);
struct hwspinlock *hwspin_lock_request(void);
struct hwspinlock *hwspin_lock_request_specific(unsigned int id);
int hwspin_lock_free(struct hwspinlock *hwlock);
int of_hwspin_lock_get_id(struct device_node *np, int index);
int hwspin_lock_get_id(struct hwspinlock *hwlock);
int __hwspin_lock_timeout(struct hwspinlock *, unsigned int, int,
unsigned long *);
int __hwspin_trylock(struct hwspinlock *, int, unsigned long *);
void __hwspin_unlock(struct hwspinlock *, int, unsigned long *);
int of_hwspin_lock_get_id_byname(struct device_node *np, const char *name);
int hwspin_lock_bust(struct hwspinlock *hwlock, unsigned int id);
int devm_hwspin_lock_free(struct device *dev, struct hwspinlock *hwlock);
struct hwspinlock *devm_hwspin_lock_request(struct device *dev);
struct hwspinlock *devm_hwspin_lock_request_specific(struct device *dev,
unsigned int id);
int devm_hwspin_lock_unregister(struct device *dev,
struct hwspinlock_device *bank);
int devm_hwspin_lock_register(struct device *dev,
struct hwspinlock_device *bank,
const struct hwspinlock_ops *ops,
int base_id, int num_locks);
#else /* !CONFIG_HWSPINLOCK */
/*
* We don't want these functions to fail if CONFIG_HWSPINLOCK is not
* enabled. We prefer to silently succeed in this case, and let the
* code path get compiled away. This way, if CONFIG_HWSPINLOCK is not
* required on a given setup, users will still work.
*
* The only exception is hwspin_lock_register/hwspin_lock_unregister, with which
* we _do_ want users to fail (no point in registering hwspinlock instances if
* the framework is not available).
*
* Note: ERR_PTR(-ENODEV) will still be considered a success for NULL-checking
* users. Others, which care, can still check this with IS_ERR.
*/
static inline struct hwspinlock *hwspin_lock_request(void)
{
return ERR_PTR(-ENODEV);
}
static inline struct hwspinlock *hwspin_lock_request_specific(unsigned int id)
{
return ERR_PTR(-ENODEV);
}
static inline int hwspin_lock_free(struct hwspinlock *hwlock)
{
return 0;
}
static inline
int __hwspin_lock_timeout(struct hwspinlock *hwlock, unsigned int to,
int mode, unsigned long *flags)
{
return 0;
}
static inline
int __hwspin_trylock(struct hwspinlock *hwlock, int mode, unsigned long *flags)
{
return 0;
}
static inline
void __hwspin_unlock(struct hwspinlock *hwlock, int mode, unsigned long *flags)
{
}
static inline int hwspin_lock_bust(struct hwspinlock *hwlock, unsigned int id)
{
return 0;
}
static inline int of_hwspin_lock_get_id(struct device_node *np, int index)
{
return 0;
}
static inline int hwspin_lock_get_id(struct hwspinlock *hwlock)
{
return 0;
}
static inline
int of_hwspin_lock_get_id_byname(struct device_node *np, const char *name)
{
return 0;
}
static inline
int devm_hwspin_lock_free(struct device *dev, struct hwspinlock *hwlock)
{
return 0;
}
static inline struct hwspinlock *devm_hwspin_lock_request(struct device *dev)
{
return ERR_PTR(-ENODEV);
}
static inline
struct hwspinlock *devm_hwspin_lock_request_specific(struct device *dev,
unsigned int id)
{
return ERR_PTR(-ENODEV);
}
#endif /* !CONFIG_HWSPINLOCK */
/**
* hwspin_trylock_irqsave() - try to lock an hwspinlock, disable interrupts
* @hwlock: an hwspinlock which we want to trylock
* @flags: a pointer to where the caller's interrupt state will be saved at
*
* This function attempts to lock the underlying hwspinlock, and will
* immediately fail if the hwspinlock is already locked.
*
* Upon a successful return from this function, preemption and local
* interrupts are disabled (previous interrupts state is saved at @flags),
* so the caller must not sleep, and is advised to release the hwspinlock
* as soon as possible.
*
* Returns 0 if we successfully locked the hwspinlock, -EBUSY if
* the hwspinlock was already taken, and -EINVAL if @hwlock is invalid.
*/
static inline
int hwspin_trylock_irqsave(struct hwspinlock *hwlock, unsigned long *flags)
{
return __hwspin_trylock(hwlock, HWLOCK_IRQSTATE, flags);
}
/**
* hwspin_trylock_irq() - try to lock an hwspinlock, disable interrupts
* @hwlock: an hwspinlock which we want to trylock
*
* This function attempts to lock the underlying hwspinlock, and will
* immediately fail if the hwspinlock is already locked.
*
* Upon a successful return from this function, preemption and local
* interrupts are disabled, so the caller must not sleep, and is advised
* to release the hwspinlock as soon as possible.
*
* Returns 0 if we successfully locked the hwspinlock, -EBUSY if
* the hwspinlock was already taken, and -EINVAL if @hwlock is invalid.
*/
static inline int hwspin_trylock_irq(struct hwspinlock *hwlock)
{
return __hwspin_trylock(hwlock, HWLOCK_IRQ, NULL);
}
/**
* hwspin_trylock_raw() - attempt to lock a specific hwspinlock
* @hwlock: an hwspinlock which we want to trylock
*
* This function attempts to lock an hwspinlock, and will immediately fail
* if the hwspinlock is already taken.
*
* Caution: User must protect the routine of getting hardware lock with mutex
* or spinlock to avoid dead-lock, that will let user can do some time-consuming
* or sleepable operations under the hardware lock.
*
* Returns 0 if we successfully locked the hwspinlock, -EBUSY if
* the hwspinlock was already taken, and -EINVAL if @hwlock is invalid.
*/
static inline int hwspin_trylock_raw(struct hwspinlock *hwlock)
{
return __hwspin_trylock(hwlock, HWLOCK_RAW, NULL);
}
/**
* hwspin_trylock_in_atomic() - attempt to lock a specific hwspinlock
* @hwlock: an hwspinlock which we want to trylock
*
* This function attempts to lock an hwspinlock, and will immediately fail
* if the hwspinlock is already taken.
*
* This function shall be called only from an atomic context.
*
* Returns 0 if we successfully locked the hwspinlock, -EBUSY if
* the hwspinlock was already taken, and -EINVAL if @hwlock is invalid.
*/
static inline int hwspin_trylock_in_atomic(struct hwspinlock *hwlock)
{
return __hwspin_trylock(hwlock, HWLOCK_IN_ATOMIC, NULL);
}
/**
* hwspin_trylock() - attempt to lock a specific hwspinlock
* @hwlock: an hwspinlock which we want to trylock
*
* This function attempts to lock an hwspinlock, and will immediately fail
* if the hwspinlock is already taken.
*
* Upon a successful return from this function, preemption is disabled,
* so the caller must not sleep, and is advised to release the hwspinlock
* as soon as possible. This is required in order to minimize remote cores
* polling on the hardware interconnect.
*
* Returns 0 if we successfully locked the hwspinlock, -EBUSY if
* the hwspinlock was already taken, and -EINVAL if @hwlock is invalid.
*/
static inline int hwspin_trylock(struct hwspinlock *hwlock)
{
return __hwspin_trylock(hwlock, 0, NULL);
}
/**
* hwspin_lock_timeout_irqsave() - lock hwspinlock, with timeout, disable irqs
* @hwlock: the hwspinlock to be locked
* @to: timeout value in msecs
* @flags: a pointer to where the caller's interrupt state will be saved at
*
* This function locks the underlying @hwlock. If the @hwlock
* is already taken, the function will busy loop waiting for it to
* be released, but give up when @timeout msecs have elapsed.
*
* Upon a successful return from this function, preemption and local interrupts
* are disabled (plus previous interrupt state is saved), so the caller must
* not sleep, and is advised to release the hwspinlock as soon as possible.
*
* Returns 0 when the @hwlock was successfully taken, and an appropriate
* error code otherwise (most notably an -ETIMEDOUT if the @hwlock is still
* busy after @timeout msecs). The function will never sleep.
*/
static inline int hwspin_lock_timeout_irqsave(struct hwspinlock *hwlock,
unsigned int to, unsigned long *flags)
{
return __hwspin_lock_timeout(hwlock, to, HWLOCK_IRQSTATE, flags);
}
/**
* hwspin_lock_timeout_irq() - lock hwspinlock, with timeout, disable irqs
* @hwlock: the hwspinlock to be locked
* @to: timeout value in msecs
*
* This function locks the underlying @hwlock. If the @hwlock
* is already taken, the function will busy loop waiting for it to
* be released, but give up when @timeout msecs have elapsed.
*
* Upon a successful return from this function, preemption and local interrupts
* are disabled so the caller must not sleep, and is advised to release the
* hwspinlock as soon as possible.
*
* Returns 0 when the @hwlock was successfully taken, and an appropriate
* error code otherwise (most notably an -ETIMEDOUT if the @hwlock is still
* busy after @timeout msecs). The function will never sleep.
*/
static inline
int hwspin_lock_timeout_irq(struct hwspinlock *hwlock, unsigned int to)
{
return __hwspin_lock_timeout(hwlock, to, HWLOCK_IRQ, NULL);
}
/**
* hwspin_lock_timeout_raw() - lock an hwspinlock with timeout limit
* @hwlock: the hwspinlock to be locked
* @to: timeout value in msecs
*
* This function locks the underlying @hwlock. If the @hwlock
* is already taken, the function will busy loop waiting for it to
* be released, but give up when @timeout msecs have elapsed.
*
* Caution: User must protect the routine of getting hardware lock with mutex
* or spinlock to avoid dead-lock, that will let user can do some time-consuming
* or sleepable operations under the hardware lock.
*
* Returns 0 when the @hwlock was successfully taken, and an appropriate
* error code otherwise (most notably an -ETIMEDOUT if the @hwlock is still
* busy after @timeout msecs). The function will never sleep.
*/
static inline
int hwspin_lock_timeout_raw(struct hwspinlock *hwlock, unsigned int to)
{
return __hwspin_lock_timeout(hwlock, to, HWLOCK_RAW, NULL);
}
/**
* hwspin_lock_timeout_in_atomic() - lock an hwspinlock with timeout limit
* @hwlock: the hwspinlock to be locked
* @to: timeout value in msecs
*
* This function locks the underlying @hwlock. If the @hwlock
* is already taken, the function will busy loop waiting for it to
* be released, but give up when @timeout msecs have elapsed.
*
* This function shall be called only from an atomic context and the timeout
* value shall not exceed a few msecs.
*
* Returns 0 when the @hwlock was successfully taken, and an appropriate
* error code otherwise (most notably an -ETIMEDOUT if the @hwlock is still
* busy after @timeout msecs). The function will never sleep.
*/
static inline
int hwspin_lock_timeout_in_atomic(struct hwspinlock *hwlock, unsigned int to)
{
return __hwspin_lock_timeout(hwlock, to, HWLOCK_IN_ATOMIC, NULL);
}
/**
* hwspin_lock_timeout() - lock an hwspinlock with timeout limit
* @hwlock: the hwspinlock to be locked
* @to: timeout value in msecs
*
* This function locks the underlying @hwlock. If the @hwlock
* is already taken, the function will busy loop waiting for it to
* be released, but give up when @timeout msecs have elapsed.
*
* Upon a successful return from this function, preemption is disabled
* so the caller must not sleep, and is advised to release the hwspinlock
* as soon as possible.
* This is required in order to minimize remote cores polling on the
* hardware interconnect.
*
* Returns 0 when the @hwlock was successfully taken, and an appropriate
* error code otherwise (most notably an -ETIMEDOUT if the @hwlock is still
* busy after @timeout msecs). The function will never sleep.
*/
static inline
int hwspin_lock_timeout(struct hwspinlock *hwlock, unsigned int to)
{
return __hwspin_lock_timeout(hwlock, to, 0, NULL);
}
/**
* hwspin_unlock_irqrestore() - unlock hwspinlock, restore irq state
* @hwlock: a previously-acquired hwspinlock which we want to unlock
* @flags: previous caller's interrupt state to restore
*
* This function will unlock a specific hwspinlock, enable preemption and
* restore the previous state of the local interrupts. It should be used
* to undo, e.g., hwspin_trylock_irqsave().
*
* @hwlock must be already locked before calling this function: it is a bug
* to call unlock on a @hwlock that is already unlocked.
*/
static inline void hwspin_unlock_irqrestore(struct hwspinlock *hwlock,
unsigned long *flags)
{
__hwspin_unlock(hwlock, HWLOCK_IRQSTATE, flags);
}
/**
* hwspin_unlock_irq() - unlock hwspinlock, enable interrupts
* @hwlock: a previously-acquired hwspinlock which we want to unlock
*
* This function will unlock a specific hwspinlock, enable preemption and
* enable local interrupts. Should be used to undo hwspin_lock_irq().
*
* @hwlock must be already locked (e.g. by hwspin_trylock_irq()) before
* calling this function: it is a bug to call unlock on a @hwlock that is
* already unlocked.
*/
static inline void hwspin_unlock_irq(struct hwspinlock *hwlock)
{
__hwspin_unlock(hwlock, HWLOCK_IRQ, NULL);
}
/**
* hwspin_unlock_raw() - unlock hwspinlock
* @hwlock: a previously-acquired hwspinlock which we want to unlock
*
* This function will unlock a specific hwspinlock.
*
* @hwlock must be already locked (e.g. by hwspin_trylock()) before calling
* this function: it is a bug to call unlock on a @hwlock that is already
* unlocked.
*/
static inline void hwspin_unlock_raw(struct hwspinlock *hwlock)
{
__hwspin_unlock(hwlock, HWLOCK_RAW, NULL);
}
/**
* hwspin_unlock_in_atomic() - unlock hwspinlock
* @hwlock: a previously-acquired hwspinlock which we want to unlock
*
* This function will unlock a specific hwspinlock.
*
* @hwlock must be already locked (e.g. by hwspin_trylock()) before calling
* this function: it is a bug to call unlock on a @hwlock that is already
* unlocked.
*/
static inline void hwspin_unlock_in_atomic(struct hwspinlock *hwlock)
{
__hwspin_unlock(hwlock, HWLOCK_IN_ATOMIC, NULL);
}
/**
* hwspin_unlock() - unlock hwspinlock
* @hwlock: a previously-acquired hwspinlock which we want to unlock
*
* This function will unlock a specific hwspinlock and enable preemption
* back.
*
* @hwlock must be already locked (e.g. by hwspin_trylock()) before calling
* this function: it is a bug to call unlock on a @hwlock that is already
* unlocked.
*/
static inline void hwspin_unlock(struct hwspinlock *hwlock)
{
__hwspin_unlock(hwlock, 0, NULL);
}
#endif /* __LINUX_HWSPINLOCK_H */
Codebase Browser
linux