/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
* Copyright (c) 2015-2018, The Linux Foundation. All rights reserved.
* Copyright (C) 2013 Red Hat
* Author: Rob Clark <[email protected]>
*/
#ifndef __DPU_ENCODER_H__
#define __DPU_ENCODER_H__
#include <drm/drm_crtc.h>
#include "dpu_hw_mdss.h"
#define DPU_ENCODER_FRAME_EVENT_DONE BIT(0)
#define DPU_ENCODER_FRAME_EVENT_ERROR BIT(1)
#define DPU_ENCODER_FRAME_EVENT_PANEL_DEAD BIT(2)
#define DPU_ENCODER_FRAME_EVENT_IDLE BIT(3)
#define IDLE_TIMEOUT (66 - 16/2)
/**
* struct msm_display_info - defines display properties
* @intf_type: INTF_ type
* @num_of_h_tiles: Number of horizontal tiles in case of split interface
* @h_tile_instance: Controller instance used per tile. Number of elements is
* based on num_of_h_tiles
* @is_cmd_mode Boolean to indicate if the CMD mode is requested
* @vsync_source: Source of the TE signal for DSI CMD devices
*/
struct msm_display_info {
enum dpu_intf_type intf_type;
uint32_t num_of_h_tiles;
uint32_t h_tile_instance[MAX_H_TILES_PER_DISPLAY];
bool is_cmd_mode;
enum dpu_vsync_source vsync_source;
};
/**
* dpu_encoder_assign_crtc - Link the encoder to the crtc it's assigned to
* @encoder: encoder pointer
* @crtc: crtc pointer
*/
void dpu_encoder_assign_crtc(struct drm_encoder *encoder,
struct drm_crtc *crtc);
/**
* dpu_encoder_toggle_vblank_for_crtc - Toggles vblank interrupts on or off if
* the encoder is assigned to the given crtc
* @encoder: encoder pointer
* @crtc: crtc pointer
* @enable: true if vblank should be enabled
*/
void dpu_encoder_toggle_vblank_for_crtc(struct drm_encoder *encoder,
struct drm_crtc *crtc, bool enable);
/**
* dpu_encoder_prepare_for_kickoff - schedule double buffer flip of the ctl
* path (i.e. ctl flush and start) at next appropriate time.
* Immediately: if no previous commit is outstanding.
* Delayed: Block until next trigger can be issued.
* @encoder: encoder pointer
*/
void dpu_encoder_prepare_for_kickoff(struct drm_encoder *encoder);
/**
* dpu_encoder_trigger_kickoff_pending - Clear the flush bits from previous
* kickoff and trigger the ctl prepare progress for command mode display.
* @encoder: encoder pointer
*/
void dpu_encoder_trigger_kickoff_pending(struct drm_encoder *encoder);
/**
* dpu_encoder_kickoff - trigger a double buffer flip of the ctl path
* (i.e. ctl flush and start) immediately.
* @encoder: encoder pointer
*/
void dpu_encoder_kickoff(struct drm_encoder *encoder);
/**
* dpu_encoder_wakeup_time - get the time of the next vsync
*/
int dpu_encoder_vsync_time(struct drm_encoder *drm_enc, ktime_t *wakeup_time);
int dpu_encoder_wait_for_commit_done(struct drm_encoder *drm_encoder);
int dpu_encoder_wait_for_tx_complete(struct drm_encoder *drm_encoder);
/*
* dpu_encoder_get_intf_mode - get interface mode of the given encoder
* @encoder: Pointer to drm encoder object
*/
enum dpu_intf_mode dpu_encoder_get_intf_mode(struct drm_encoder *encoder);
/**
* dpu_encoder_virt_runtime_resume - pm runtime resume the encoder configs
* @encoder: encoder pointer
*/
void dpu_encoder_virt_runtime_resume(struct drm_encoder *encoder);
/**
* dpu_encoder_init - initialize virtual encoder object
* @dev: Pointer to drm device structure
* @drm_enc_mode: corresponding DRM_MODE_ENCODER_* constant
* @disp_info: Pointer to display information structure
* Returns: Pointer to newly created drm encoder
*/
struct drm_encoder *dpu_encoder_init(struct drm_device *dev,
int drm_enc_mode,
struct msm_display_info *disp_info);
/**
* dpu_encoder_set_idle_timeout - set the idle timeout for video
* and command mode encoders.
* @drm_enc: Pointer to previously created drm encoder structure
* @idle_timeout: idle timeout duration in milliseconds
*/
void dpu_encoder_set_idle_timeout(struct drm_encoder *drm_enc,
u32 idle_timeout);
/**
* dpu_encoder_get_linecount - get interface line count for the encoder.
* @drm_enc: Pointer to previously created drm encoder structure
*/
int dpu_encoder_get_linecount(struct drm_encoder *drm_enc);
/**
* dpu_encoder_get_vsync_count - get vsync count for the encoder.
* @drm_enc: Pointer to previously created drm encoder structure
*/
int dpu_encoder_get_vsync_count(struct drm_encoder *drm_enc);
/**
* dpu_encoder_is_widebus_enabled - return bool value if widebus is enabled
* @drm_enc: Pointer to previously created drm encoder structure
*/
bool dpu_encoder_is_widebus_enabled(const struct drm_encoder *drm_enc);
/**
* dpu_encoder_is_dsc_enabled - indicate whether dsc is enabled
* for the encoder.
* @drm_enc: Pointer to previously created drm encoder structure
*/
bool dpu_encoder_is_dsc_enabled(const struct drm_encoder *drm_enc);
/**
* dpu_encoder_get_crc_values_cnt - get number of physical encoders contained
* in virtual encoder that can collect CRC values
* @drm_enc: Pointer to previously created drm encoder structure
* Returns: Number of physical encoders for given drm encoder
*/
int dpu_encoder_get_crc_values_cnt(const struct drm_encoder *drm_enc);
/**
* dpu_encoder_setup_misr - enable misr calculations
* @drm_enc: Pointer to previously created drm encoder structure
*/
void dpu_encoder_setup_misr(const struct drm_encoder *drm_encoder);
/**
* dpu_encoder_get_crc - get the crc value from interface blocks
* @drm_enc: Pointer to previously created drm encoder structure
* Returns: 0 on success, error otherwise
*/
int dpu_encoder_get_crc(const struct drm_encoder *drm_enc, u32 *crcs, int pos);
/**
* dpu_encoder_use_dsc_merge - returns true if the encoder uses DSC merge topology.
* @drm_enc: Pointer to previously created drm encoder structure
*/
bool dpu_encoder_use_dsc_merge(struct drm_encoder *drm_enc);
/**
* dpu_encoder_prepare_wb_job - prepare writeback job for the encoder.
* @drm_enc: Pointer to previously created drm encoder structure
* @job: Pointer to the current drm writeback job
*/
void dpu_encoder_prepare_wb_job(struct drm_encoder *drm_enc,
struct drm_writeback_job *job);
/**
* dpu_encoder_cleanup_wb_job - cleanup writeback job for the encoder.
* @drm_enc: Pointer to previously created drm encoder structure
* @job: Pointer to the current drm writeback job
*/
void dpu_encoder_cleanup_wb_job(struct drm_encoder *drm_enc,
struct drm_writeback_job *job);
/**
* dpu_encoder_is_valid_for_commit - check if encode has valid parameters for commit.
* @drm_enc: Pointer to drm encoder structure
*/
bool dpu_encoder_is_valid_for_commit(struct drm_encoder *drm_enc);
#endif /* __DPU_ENCODER_H__ */
Codebase Browser
linux