// SPDX-License-Identifier: GPL-2.0
/*
* Asia Better Technology Ltd. Y030XX067A IPS LCD panel driver
*
* Copyright (C) 2020, Paul Cercueil <[email protected]>
* Copyright (C) 2020, Christophe Branchereau <[email protected]>
*/
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/gpio/consumer.h>
#include <linux/media-bus-format.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/regulator/consumer.h>
#include <linux/spi/spi.h>
#include <drm/drm_modes.h>
#include <drm/drm_panel.h>
#define REG00_VBRT_CTRL(val) (val)
#define REG01_COM_DC(val) (val)
#define REG02_DA_CONTRAST(val) (val)
#define REG02_VESA_SEL(val) ((val) << 5)
#define REG02_COMDC_SW BIT(7)
#define REG03_VPOSITION(val) (val)
#define REG03_BSMOUNT BIT(5)
#define REG03_COMTST BIT(6)
#define REG03_HPOSITION1 BIT(7)
#define REG04_HPOSITION1(val) (val)
#define REG05_CLIP BIT(0)
#define REG05_NVM_VREFRESH BIT(1)
#define REG05_SLFR BIT(2)
#define REG05_SLBRCHARGE(val) ((val) << 3)
#define REG05_PRECHARGE_LEVEL(val) ((val) << 6)
#define REG06_TEST5 BIT(0)
#define REG06_SLDWN BIT(1)
#define REG06_SLRGT BIT(2)
#define REG06_TEST2 BIT(3)
#define REG06_XPSAVE BIT(4)
#define REG06_GAMMA_SEL(val) ((val) << 5)
#define REG06_NT BIT(7)
#define REG07_TEST1 BIT(0)
#define REG07_HDVD_POL BIT(1)
#define REG07_CK_POL BIT(2)
#define REG07_TEST3 BIT(3)
#define REG07_TEST4 BIT(4)
#define REG07_480_LINEMASK BIT(5)
#define REG07_AMPTST(val) ((val) << 6)
#define REG08_SLHRC(val) (val)
#define REG08_CLOCK_DIV(val) ((val) << 2)
#define REG08_PANEL(val) ((val) << 5)
#define REG09_SUB_BRIGHT_R(val) (val)
#define REG09_NW_NB BIT(6)
#define REG09_IPCON BIT(7)
#define REG0A_SUB_BRIGHT_B(val) (val)
#define REG0A_PAIR BIT(6)
#define REG0A_DE_SEL BIT(7)
#define REG0B_MBK_POSITION(val) (val)
#define REG0B_HD_FREERUN BIT(4)
#define REG0B_VD_FREERUN BIT(5)
#define REG0B_YUV2BIN(val) ((val) << 6)
#define REG0C_CONTRAST_R(val) (val)
#define REG0C_DOUBLEREAD BIT(7)
#define REG0D_CONTRAST_G(val) (val)
#define REG0D_RGB_YUV BIT(7)
#define REG0E_CONTRAST_B(val) (val)
#define REG0E_PIXELCOLORDRIVE BIT(7)
#define REG0F_ASPECT BIT(0)
#define REG0F_OVERSCAN(val) ((val) << 1)
#define REG0F_FRAMEWIDTH(val) ((val) << 3)
#define REG10_BRIGHT(val) (val)
#define REG11_SIG_GAIN(val) (val)
#define REG11_SIGC_CNTL BIT(6)
#define REG11_SIGC_POL BIT(7)
#define REG12_COLOR(val) (val)
#define REG12_PWCKSEL(val) ((val) << 6)
#define REG13_4096LEVEL_CNTL(val) (val)
#define REG13_SL4096(val) ((val) << 4)
#define REG13_LIMITER_CONTROL BIT(7)
#define REG14_PANEL_TEST(val) (val)
#define REG15_NVM_LINK0 BIT(0)
#define REG15_NVM_LINK1 BIT(1)
#define REG15_NVM_LINK2 BIT(2)
#define REG15_NVM_LINK3 BIT(3)
#define REG15_NVM_LINK4 BIT(4)
#define REG15_NVM_LINK5 BIT(5)
#define REG15_NVM_LINK6 BIT(6)
#define REG15_NVM_LINK7 BIT(7)
struct y030xx067a_info {
const struct drm_display_mode *display_modes;
unsigned int num_modes;
u16 width_mm, height_mm;
u32 bus_format, bus_flags;
};
struct y030xx067a {
struct drm_panel panel;
struct spi_device *spi;
struct regmap *map;
const struct y030xx067a_info *panel_info;
struct regulator *supply;
struct gpio_desc *reset_gpio;
};
static inline struct y030xx067a *to_y030xx067a(struct drm_panel *panel)
{
return container_of(panel, struct y030xx067a, panel);
}
static const struct reg_sequence y030xx067a_init_sequence[] = {
{ 0x00, REG00_VBRT_CTRL(0x7f) },
{ 0x01, REG01_COM_DC(0x3c) },
{ 0x02, REG02_VESA_SEL(0x3) | REG02_DA_CONTRAST(0x1f) },
{ 0x03, REG03_VPOSITION(0x0a) },
{ 0x04, REG04_HPOSITION1(0xd2) },
{ 0x05, REG05_CLIP | REG05_NVM_VREFRESH | REG05_SLBRCHARGE(0x2) },
{ 0x06, REG06_NT },
{ 0x07, 0 },
{ 0x08, REG08_PANEL(0x1) | REG08_CLOCK_DIV(0x2) },
{ 0x09, REG09_SUB_BRIGHT_R(0x20) },
{ 0x0a, REG0A_SUB_BRIGHT_B(0x20) },
{ 0x0b, REG0B_HD_FREERUN | REG0B_VD_FREERUN },
{ 0x0c, REG0C_CONTRAST_R(0x00) },
{ 0x0d, REG0D_CONTRAST_G(0x00) },
{ 0x0e, REG0E_CONTRAST_B(0x10) },
{ 0x0f, 0 },
{ 0x10, REG10_BRIGHT(0x7f) },
{ 0x11, REG11_SIGC_CNTL | REG11_SIG_GAIN(0x3f) },
{ 0x12, REG12_COLOR(0x20) | REG12_PWCKSEL(0x1) },
{ 0x13, REG13_4096LEVEL_CNTL(0x8) },
{ 0x14, 0 },
{ 0x15, 0 },
};
static int y030xx067a_prepare(struct drm_panel *panel)
{
struct y030xx067a *priv = to_y030xx067a(panel);
struct device *dev = &priv->spi->dev;
int err;
err = regulator_enable(priv->supply);
if (err) {
dev_err(dev, "Failed to enable power supply: %d\n", err);
return err;
}
/* Reset the chip */
gpiod_set_value_cansleep(priv->reset_gpio, 1);
usleep_range(1000, 20000);
gpiod_set_value_cansleep(priv->reset_gpio, 0);
usleep_range(1000, 20000);
err = regmap_multi_reg_write(priv->map, y030xx067a_init_sequence,
ARRAY_SIZE(y030xx067a_init_sequence));
if (err) {
dev_err(dev, "Failed to init registers: %d\n", err);
goto err_disable_regulator;
}
return 0;
err_disable_regulator:
regulator_disable(priv->supply);
return err;
}
static int y030xx067a_unprepare(struct drm_panel *panel)
{
struct y030xx067a *priv = to_y030xx067a(panel);
gpiod_set_value_cansleep(priv->reset_gpio, 1);
regulator_disable(priv->supply);
return 0;
}
static int y030xx067a_enable(struct drm_panel *panel)
{
struct y030xx067a *priv = to_y030xx067a(panel);
regmap_set_bits(priv->map, 0x06, REG06_XPSAVE);
if (panel->backlight) {
/* Wait for the picture to be ready before enabling backlight */
msleep(120);
}
return 0;
}
static int y030xx067a_disable(struct drm_panel *panel)
{
struct y030xx067a *priv = to_y030xx067a(panel);
regmap_clear_bits(priv->map, 0x06, REG06_XPSAVE);
return 0;
}
static int y030xx067a_get_modes(struct drm_panel *panel,
struct drm_connector *connector)
{
struct y030xx067a *priv = to_y030xx067a(panel);
const struct y030xx067a_info *panel_info = priv->panel_info;
struct drm_display_mode *mode;
unsigned int i;
for (i = 0; i < panel_info->num_modes; i++) {
mode = drm_mode_duplicate(connector->dev,
&panel_info->display_modes[i]);
if (!mode)
return -ENOMEM;
drm_mode_set_name(mode);
mode->type = DRM_MODE_TYPE_DRIVER;
if (panel_info->num_modes == 1)
mode->type |= DRM_MODE_TYPE_PREFERRED;
drm_mode_probed_add(connector, mode);
}
connector->display_info.bpc = 8;
connector->display_info.width_mm = panel_info->width_mm;
connector->display_info.height_mm = panel_info->height_mm;
drm_display_info_set_bus_formats(&connector->display_info,
&panel_info->bus_format, 1);
connector->display_info.bus_flags = panel_info->bus_flags;
return panel_info->num_modes;
}
static const struct drm_panel_funcs y030xx067a_funcs = {
.prepare = y030xx067a_prepare,
.unprepare = y030xx067a_unprepare,
.enable = y030xx067a_enable,
.disable = y030xx067a_disable,
.get_modes = y030xx067a_get_modes,
};
static const struct regmap_config y030xx067a_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
.max_register = 0x15,
.cache_type = REGCACHE_FLAT,
};
static int y030xx067a_probe(struct spi_device *spi)
{
struct device *dev = &spi->dev;
struct y030xx067a *priv;
int err;
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
priv->spi = spi;
spi_set_drvdata(spi, priv);
priv->map = devm_regmap_init_spi(spi, &y030xx067a_regmap_config);
if (IS_ERR(priv->map)) {
dev_err(dev, "Unable to init regmap\n");
return PTR_ERR(priv->map);
}
priv->panel_info = of_device_get_match_data(dev);
if (!priv->panel_info)
return -EINVAL;
priv->supply = devm_regulator_get(dev, "power");
if (IS_ERR(priv->supply))
return dev_err_probe(dev, PTR_ERR(priv->supply),
"Failed to get power supply\n");
priv->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
if (IS_ERR(priv->reset_gpio))
return dev_err_probe(dev, PTR_ERR(priv->reset_gpio),
"Failed to get reset GPIO\n");
drm_panel_init(&priv->panel, dev, &y030xx067a_funcs,
DRM_MODE_CONNECTOR_DPI);
err = drm_panel_of_backlight(&priv->panel);
if (err)
return err;
drm_panel_add(&priv->panel);
return 0;
}
static void y030xx067a_remove(struct spi_device *spi)
{
struct y030xx067a *priv = spi_get_drvdata(spi);
drm_panel_remove(&priv->panel);
drm_panel_disable(&priv->panel);
drm_panel_unprepare(&priv->panel);
}
static const struct drm_display_mode y030xx067a_modes[] = {
{ /* 60 Hz */
.clock = 14400,
.hdisplay = 320,
.hsync_start = 320 + 10,
.hsync_end = 320 + 10 + 37,
.htotal = 320 + 10 + 37 + 33,
.vdisplay = 480,
.vsync_start = 480 + 84,
.vsync_end = 480 + 84 + 20,
.vtotal = 480 + 84 + 20 + 16,
.flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
},
{ /* 50 Hz */
.clock = 12000,
.hdisplay = 320,
.hsync_start = 320 + 10,
.hsync_end = 320 + 10 + 37,
.htotal = 320 + 10 + 37 + 33,
.vdisplay = 480,
.vsync_start = 480 + 84,
.vsync_end = 480 + 84 + 20,
.vtotal = 480 + 84 + 20 + 16,
.flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
},
};
static const struct y030xx067a_info y030xx067a_info = {
.display_modes = y030xx067a_modes,
.num_modes = ARRAY_SIZE(y030xx067a_modes),
.width_mm = 69,
.height_mm = 51,
.bus_format = MEDIA_BUS_FMT_RGB888_3X8_DELTA,
.bus_flags = DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE | DRM_BUS_FLAG_DE_LOW,
};
static const struct of_device_id y030xx067a_of_match[] = {
{ .compatible = "abt,y030xx067a", .data = &y030xx067a_info },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, y030xx067a_of_match);
static struct spi_driver y030xx067a_driver = {
.driver = {
.name = "abt-y030xx067a",
.of_match_table = y030xx067a_of_match,
},
.probe = y030xx067a_probe,
.remove = y030xx067a_remove,
};
module_spi_driver(y030xx067a_driver);
MODULE_AUTHOR("Paul Cercueil <[email protected]>");
MODULE_AUTHOR("Christophe Branchereau <[email protected]>");
MODULE_DESCRIPTION("Asia Better Technology Ltd. Y030XX067A IPS LCD panel driver");
MODULE_LICENSE("GPL v2");
Codebase Browser
linux