// SPDX-License-Identifier: GPL-2.0
/* Driver for 100BASE-TX PHY embedded into NXP SJA1110 switch
*
* Copyright 2022-2023 NXP
*/
#include <linux/kernel.h>
#include <linux/mii.h>
#include <linux/module.h>
#include <linux/phy.h>
#define PHY_ID_CBTX_SJA1110 0x001bb020
/* Registers */
#define CBTX_MODE_CTRL_STAT 0x11
#define CBTX_PDOWN_CTRL 0x18
#define CBTX_RX_ERR_COUNTER 0x1a
#define CBTX_IRQ_STAT 0x1d
#define CBTX_IRQ_ENABLE 0x1e
/* Fields */
#define CBTX_MODE_CTRL_STAT_AUTO_MDIX_EN BIT(7)
#define CBTX_MODE_CTRL_STAT_MDIX_MODE BIT(6)
#define CBTX_PDOWN_CTL_TRUE_PDOWN BIT(0)
#define CBTX_IRQ_ENERGYON BIT(7)
#define CBTX_IRQ_AN_COMPLETE BIT(6)
#define CBTX_IRQ_REM_FAULT BIT(5)
#define CBTX_IRQ_LINK_DOWN BIT(4)
#define CBTX_IRQ_AN_LP_ACK BIT(3)
#define CBTX_IRQ_PARALLEL_DETECT_FAULT BIT(2)
#define CBTX_IRQ_AN_PAGE_RECV BIT(1)
static int cbtx_soft_reset(struct phy_device *phydev)
{
int ret;
/* Can't soft reset unless we remove PHY from true power down mode */
ret = phy_clear_bits(phydev, CBTX_PDOWN_CTRL,
CBTX_PDOWN_CTL_TRUE_PDOWN);
if (ret)
return ret;
return genphy_soft_reset(phydev);
}
static int cbtx_config_init(struct phy_device *phydev)
{
/* Wait for cbtx_config_aneg() to kick in and apply this */
phydev->mdix_ctrl = ETH_TP_MDI_AUTO;
return 0;
}
static int cbtx_mdix_status(struct phy_device *phydev)
{
int ret;
ret = phy_read(phydev, CBTX_MODE_CTRL_STAT);
if (ret < 0)
return ret;
if (ret & CBTX_MODE_CTRL_STAT_MDIX_MODE)
phydev->mdix = ETH_TP_MDI_X;
else
phydev->mdix = ETH_TP_MDI;
return 0;
}
static int cbtx_read_status(struct phy_device *phydev)
{
int ret;
ret = cbtx_mdix_status(phydev);
if (ret)
return ret;
return genphy_read_status(phydev);
}
static int cbtx_mdix_config(struct phy_device *phydev)
{
int ret;
switch (phydev->mdix_ctrl) {
case ETH_TP_MDI_AUTO:
return phy_set_bits(phydev, CBTX_MODE_CTRL_STAT,
CBTX_MODE_CTRL_STAT_AUTO_MDIX_EN);
case ETH_TP_MDI:
ret = phy_clear_bits(phydev, CBTX_MODE_CTRL_STAT,
CBTX_MODE_CTRL_STAT_AUTO_MDIX_EN);
if (ret)
return ret;
return phy_clear_bits(phydev, CBTX_MODE_CTRL_STAT,
CBTX_MODE_CTRL_STAT_MDIX_MODE);
case ETH_TP_MDI_X:
ret = phy_clear_bits(phydev, CBTX_MODE_CTRL_STAT,
CBTX_MODE_CTRL_STAT_AUTO_MDIX_EN);
if (ret)
return ret;
return phy_set_bits(phydev, CBTX_MODE_CTRL_STAT,
CBTX_MODE_CTRL_STAT_MDIX_MODE);
}
return 0;
}
static int cbtx_config_aneg(struct phy_device *phydev)
{
int ret;
ret = cbtx_mdix_config(phydev);
if (ret)
return ret;
return genphy_config_aneg(phydev);
}
static int cbtx_ack_interrupts(struct phy_device *phydev)
{
return phy_read(phydev, CBTX_IRQ_STAT);
}
static int cbtx_config_intr(struct phy_device *phydev)
{
int ret;
if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
ret = cbtx_ack_interrupts(phydev);
if (ret < 0)
return ret;
ret = phy_write(phydev, CBTX_IRQ_ENABLE, CBTX_IRQ_LINK_DOWN |
CBTX_IRQ_AN_COMPLETE | CBTX_IRQ_ENERGYON);
if (ret)
return ret;
} else {
ret = phy_write(phydev, CBTX_IRQ_ENABLE, 0);
if (ret)
return ret;
ret = cbtx_ack_interrupts(phydev);
if (ret < 0)
return ret;
}
return 0;
}
static irqreturn_t cbtx_handle_interrupt(struct phy_device *phydev)
{
int irq_stat, irq_enabled;
irq_stat = cbtx_ack_interrupts(phydev);
if (irq_stat < 0) {
phy_error(phydev);
return IRQ_NONE;
}
irq_enabled = phy_read(phydev, CBTX_IRQ_ENABLE);
if (irq_enabled < 0) {
phy_error(phydev);
return IRQ_NONE;
}
if (!(irq_enabled & irq_stat))
return IRQ_NONE;
phy_trigger_machine(phydev);
return IRQ_HANDLED;
}
static int cbtx_get_sset_count(struct phy_device *phydev)
{
return 1;
}
static void cbtx_get_strings(struct phy_device *phydev, u8 *data)
{
strncpy(data, "100btx_rx_err", ETH_GSTRING_LEN);
}
static void cbtx_get_stats(struct phy_device *phydev,
struct ethtool_stats *stats, u64 *data)
{
int ret;
ret = phy_read(phydev, CBTX_RX_ERR_COUNTER);
data[0] = (ret < 0) ? U64_MAX : ret;
}
static struct phy_driver cbtx_driver[] = {
{
PHY_ID_MATCH_MODEL(PHY_ID_CBTX_SJA1110),
.name = "NXP CBTX (SJA1110)",
/* PHY_BASIC_FEATURES */
.soft_reset = cbtx_soft_reset,
.config_init = cbtx_config_init,
.suspend = genphy_suspend,
.resume = genphy_resume,
.config_intr = cbtx_config_intr,
.handle_interrupt = cbtx_handle_interrupt,
.read_status = cbtx_read_status,
.config_aneg = cbtx_config_aneg,
.get_sset_count = cbtx_get_sset_count,
.get_strings = cbtx_get_strings,
.get_stats = cbtx_get_stats,
},
};
module_phy_driver(cbtx_driver);
static struct mdio_device_id __maybe_unused cbtx_tbl[] = {
{ PHY_ID_MATCH_MODEL(PHY_ID_CBTX_SJA1110) },
{ },
};
MODULE_DEVICE_TABLE(mdio, cbtx_tbl);
MODULE_AUTHOR("Vladimir Oltean <[email protected]>");
MODULE_DESCRIPTION("NXP CBTX PHY driver");
MODULE_LICENSE("GPL");