// SPDX-License-Identifier: GPL-2.0
/*
* dwc3-pci.c - PCI Specific glue layer
*
* Copyright (C) 2010-2011 Texas Instruments Incorporated - https://www.ti.com
*
* Authors: Felipe Balbi <[email protected]>,
* Sebastian Andrzej Siewior <[email protected]>
*/
#include <linux/dmi.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/pci.h>
#include <linux/workqueue.h>
#include <linux/pm_runtime.h>
#include <linux/platform_device.h>
#include <linux/gpio/consumer.h>
#include <linux/gpio/machine.h>
#include <linux/acpi.h>
#include <linux/delay.h>
#define PCI_DEVICE_ID_INTEL_BYT 0x0f37
#define PCI_DEVICE_ID_INTEL_MRFLD 0x119e
#define PCI_DEVICE_ID_INTEL_BSW 0x22b7
#define PCI_DEVICE_ID_INTEL_SPTLP 0x9d30
#define PCI_DEVICE_ID_INTEL_SPTH 0xa130
#define PCI_DEVICE_ID_INTEL_BXT 0x0aaa
#define PCI_DEVICE_ID_INTEL_BXT_M 0x1aaa
#define PCI_DEVICE_ID_INTEL_APL 0x5aaa
#define PCI_DEVICE_ID_INTEL_KBP 0xa2b0
#define PCI_DEVICE_ID_INTEL_CMLLP 0x02ee
#define PCI_DEVICE_ID_INTEL_CMLH 0x06ee
#define PCI_DEVICE_ID_INTEL_GLK 0x31aa
#define PCI_DEVICE_ID_INTEL_CNPLP 0x9dee
#define PCI_DEVICE_ID_INTEL_CNPH 0xa36e
#define PCI_DEVICE_ID_INTEL_CNPV 0xa3b0
#define PCI_DEVICE_ID_INTEL_ICLLP 0x34ee
#define PCI_DEVICE_ID_INTEL_EHL 0x4b7e
#define PCI_DEVICE_ID_INTEL_TGPLP 0xa0ee
#define PCI_DEVICE_ID_INTEL_TGPH 0x43ee
#define PCI_DEVICE_ID_INTEL_JSP 0x4dee
#define PCI_DEVICE_ID_INTEL_ADL 0x460e
#define PCI_DEVICE_ID_INTEL_ADL_PCH 0x51ee
#define PCI_DEVICE_ID_INTEL_ADLN 0x465e
#define PCI_DEVICE_ID_INTEL_ADLN_PCH 0x54ee
#define PCI_DEVICE_ID_INTEL_ADLS 0x7ae1
#define PCI_DEVICE_ID_INTEL_RPL 0xa70e
#define PCI_DEVICE_ID_INTEL_RPLS 0x7a61
#define PCI_DEVICE_ID_INTEL_MTLM 0x7eb1
#define PCI_DEVICE_ID_INTEL_MTLP 0x7ec1
#define PCI_DEVICE_ID_INTEL_MTLS 0x7f6f
#define PCI_DEVICE_ID_INTEL_MTL 0x7e7e
#define PCI_DEVICE_ID_INTEL_ARLH_PCH 0x777e
#define PCI_DEVICE_ID_INTEL_TGL 0x9a15
#define PCI_DEVICE_ID_INTEL_PTLH 0xe332
#define PCI_DEVICE_ID_INTEL_PTLH_PCH 0xe37e
#define PCI_DEVICE_ID_INTEL_PTLU 0xe432
#define PCI_DEVICE_ID_INTEL_PTLU_PCH 0xe47e
#define PCI_DEVICE_ID_AMD_MR 0x163a
#define PCI_INTEL_BXT_DSM_GUID "732b85d5-b7a7-4a1b-9ba0-4bbd00ffd511"
#define PCI_INTEL_BXT_FUNC_PMU_PWR 4
#define PCI_INTEL_BXT_STATE_D0 0
#define PCI_INTEL_BXT_STATE_D3 3
#define GP_RWBAR 1
#define GP_RWREG1 0xa0
#define GP_RWREG1_ULPI_REFCLK_DISABLE (1 << 17)
/**
* struct dwc3_pci - Driver private structure
* @dwc3: child dwc3 platform_device
* @pci: our link to PCI bus
* @guid: _DSM GUID
* @has_dsm_for_pm: true for devices which need to run _DSM on runtime PM
* @wakeup_work: work for asynchronous resume
*/
struct dwc3_pci {
struct platform_device *dwc3;
struct pci_dev *pci;
guid_t guid;
unsigned int has_dsm_for_pm:1;
struct work_struct wakeup_work;
};
static const struct acpi_gpio_params reset_gpios = { 0, 0, false };
static const struct acpi_gpio_params cs_gpios = { 1, 0, false };
static const struct acpi_gpio_mapping acpi_dwc3_byt_gpios[] = {
{ "reset-gpios", &reset_gpios, 1 },
{ "cs-gpios", &cs_gpios, 1 },
{ },
};
static struct gpiod_lookup_table platform_bytcr_gpios = {
.dev_id = "0000:00:16.0",
.table = {
GPIO_LOOKUP("INT33FC:00", 54, "cs", GPIO_ACTIVE_HIGH),
GPIO_LOOKUP("INT33FC:02", 14, "reset", GPIO_ACTIVE_HIGH),
{}
},
};
static int dwc3_byt_enable_ulpi_refclock(struct pci_dev *pci)
{
void __iomem *reg;
u32 value;
reg = pcim_iomap(pci, GP_RWBAR, 0);
if (!reg)
return -ENOMEM;
value = readl(reg + GP_RWREG1);
if (!(value & GP_RWREG1_ULPI_REFCLK_DISABLE))
goto unmap; /* ULPI refclk already enabled */
value &= ~GP_RWREG1_ULPI_REFCLK_DISABLE;
writel(value, reg + GP_RWREG1);
/* This comes from the Intel Android x86 tree w/o any explanation */
msleep(100);
unmap:
pcim_iounmap(pci, reg);
return 0;
}
static const struct property_entry dwc3_pci_intel_properties[] = {
PROPERTY_ENTRY_STRING("dr_mode", "peripheral"),
PROPERTY_ENTRY_BOOL("linux,sysdev_is_parent"),
{}
};
static const struct property_entry dwc3_pci_intel_phy_charger_detect_properties[] = {
PROPERTY_ENTRY_STRING("dr_mode", "peripheral"),
PROPERTY_ENTRY_BOOL("snps,dis_u2_susphy_quirk"),
PROPERTY_ENTRY_BOOL("linux,phy_charger_detect"),
PROPERTY_ENTRY_BOOL("linux,sysdev_is_parent"),
{}
};
static const struct property_entry dwc3_pci_intel_byt_properties[] = {
PROPERTY_ENTRY_STRING("dr_mode", "peripheral"),
PROPERTY_ENTRY_BOOL("snps,dis_u2_susphy_quirk"),
PROPERTY_ENTRY_BOOL("linux,sysdev_is_parent"),
{}
};
static const struct property_entry dwc3_pci_mrfld_properties[] = {
PROPERTY_ENTRY_STRING("dr_mode", "otg"),
PROPERTY_ENTRY_STRING("linux,extcon-name", "mrfld_bcove_pwrsrc"),
PROPERTY_ENTRY_BOOL("snps,dis_u3_susphy_quirk"),
PROPERTY_ENTRY_BOOL("snps,dis_u2_susphy_quirk"),
PROPERTY_ENTRY_BOOL("snps,usb2-gadget-lpm-disable"),
PROPERTY_ENTRY_BOOL("linux,sysdev_is_parent"),
{}
};
static const struct property_entry dwc3_pci_amd_properties[] = {
PROPERTY_ENTRY_BOOL("snps,has-lpm-erratum"),
PROPERTY_ENTRY_U8("snps,lpm-nyet-threshold", 0xf),
PROPERTY_ENTRY_BOOL("snps,u2exit_lfps_quirk"),
PROPERTY_ENTRY_BOOL("snps,u2ss_inp3_quirk"),
PROPERTY_ENTRY_BOOL("snps,req_p1p2p3_quirk"),
PROPERTY_ENTRY_BOOL("snps,del_p1p2p3_quirk"),
PROPERTY_ENTRY_BOOL("snps,del_phy_power_chg_quirk"),
PROPERTY_ENTRY_BOOL("snps,lfps_filter_quirk"),
PROPERTY_ENTRY_BOOL("snps,rx_detect_poll_quirk"),
PROPERTY_ENTRY_BOOL("snps,tx_de_emphasis_quirk"),
PROPERTY_ENTRY_U8("snps,tx_de_emphasis", 1),
/* FIXME these quirks should be removed when AMD NL tapes out */
PROPERTY_ENTRY_BOOL("snps,disable_scramble_quirk"),
PROPERTY_ENTRY_BOOL("snps,dis_u3_susphy_quirk"),
PROPERTY_ENTRY_BOOL("snps,dis_u2_susphy_quirk"),
PROPERTY_ENTRY_BOOL("linux,sysdev_is_parent"),
{}
};
static const struct property_entry dwc3_pci_mr_properties[] = {
PROPERTY_ENTRY_STRING("dr_mode", "otg"),
PROPERTY_ENTRY_BOOL("usb-role-switch"),
PROPERTY_ENTRY_STRING("role-switch-default-mode", "host"),
PROPERTY_ENTRY_BOOL("linux,sysdev_is_parent"),
{}
};
static const struct software_node dwc3_pci_intel_swnode = {
.properties = dwc3_pci_intel_properties,
};
static const struct software_node dwc3_pci_intel_phy_charger_detect_swnode = {
.properties = dwc3_pci_intel_phy_charger_detect_properties,
};
static const struct software_node dwc3_pci_intel_byt_swnode = {
.properties = dwc3_pci_intel_byt_properties,
};
static const struct software_node dwc3_pci_intel_mrfld_swnode = {
.properties = dwc3_pci_mrfld_properties,
};
static const struct software_node dwc3_pci_amd_swnode = {
.properties = dwc3_pci_amd_properties,
};
static const struct software_node dwc3_pci_amd_mr_swnode = {
.properties = dwc3_pci_mr_properties,
};
static int dwc3_pci_quirks(struct dwc3_pci *dwc,
const struct software_node *swnode)
{
struct pci_dev *pdev = dwc->pci;
if (pdev->vendor == PCI_VENDOR_ID_INTEL) {
if (pdev->device == PCI_DEVICE_ID_INTEL_BXT ||
pdev->device == PCI_DEVICE_ID_INTEL_BXT_M ||
pdev->device == PCI_DEVICE_ID_INTEL_EHL) {
guid_parse(PCI_INTEL_BXT_DSM_GUID, &dwc->guid);
dwc->has_dsm_for_pm = true;
}
if (pdev->device == PCI_DEVICE_ID_INTEL_BYT) {
struct gpio_desc *gpio;
const char *bios_ver;
int ret;
/* On BYT the FW does not always enable the refclock */
ret = dwc3_byt_enable_ulpi_refclock(pdev);
if (ret)
return ret;
ret = devm_acpi_dev_add_driver_gpios(&pdev->dev,
acpi_dwc3_byt_gpios);
if (ret)
dev_dbg(&pdev->dev, "failed to add mapping table\n");
/*
* A lot of BYT devices lack ACPI resource entries for
* the GPIOs. If the ACPI entry for the GPIO controller
* is present add a fallback mapping to the reference
* design GPIOs which all boards seem to use.
*/
if (acpi_dev_present("INT33FC", NULL, -1))
gpiod_add_lookup_table(&platform_bytcr_gpios);
/*
* These GPIOs will turn on the USB2 PHY. Note that we have to
* put the gpio descriptors again here because the phy driver
* might want to grab them, too.
*/
gpio = gpiod_get_optional(&pdev->dev, "cs", GPIOD_OUT_LOW);
if (IS_ERR(gpio))
return PTR_ERR(gpio);
gpiod_set_value_cansleep(gpio, 1);
gpiod_put(gpio);
gpio = gpiod_get_optional(&pdev->dev, "reset", GPIOD_OUT_LOW);
if (IS_ERR(gpio))
return PTR_ERR(gpio);
if (gpio) {
gpiod_set_value_cansleep(gpio, 1);
gpiod_put(gpio);
usleep_range(10000, 11000);
}
/*
* Make the pdev name predictable (only 1 DWC3 on BYT)
* and patch the phy dev-name into the lookup table so
* that the phy-driver can get the GPIOs.
*/
dwc->dwc3->id = PLATFORM_DEVID_NONE;
platform_bytcr_gpios.dev_id = "dwc3.ulpi";
/*
* Some Android tablets with a Crystal Cove PMIC
* (INT33FD), rely on the TUSB1211 phy for charger
* detection. These can be identified by them _not_
* using the standard ACPI battery and ac drivers.
*/
bios_ver = dmi_get_system_info(DMI_BIOS_VERSION);
if (acpi_dev_present("INT33FD", "1", 2) &&
acpi_quirk_skip_acpi_ac_and_battery() &&
/* Lenovo Yoga Tablet 2 Pro 1380 uses LC824206XA instead */
!(bios_ver &&
strstarts(bios_ver, "BLADE_21.X64.0005.R00.1504101516"))) {
dev_info(&pdev->dev, "Using TUSB1211 phy for charger detection\n");
swnode = &dwc3_pci_intel_phy_charger_detect_swnode;
}
}
}
return device_add_software_node(&dwc->dwc3->dev, swnode);
}
#ifdef CONFIG_PM
static void dwc3_pci_resume_work(struct work_struct *work)
{
struct dwc3_pci *dwc = container_of(work, struct dwc3_pci, wakeup_work);
struct platform_device *dwc3 = dwc->dwc3;
int ret;
ret = pm_runtime_get_sync(&dwc3->dev);
if (ret < 0) {
pm_runtime_put_sync_autosuspend(&dwc3->dev);
return;
}
pm_runtime_mark_last_busy(&dwc3->dev);
pm_runtime_put_sync_autosuspend(&dwc3->dev);
}
#endif
static int dwc3_pci_probe(struct pci_dev *pci, const struct pci_device_id *id)
{
struct dwc3_pci *dwc;
struct resource res[2];
int ret;
struct device *dev = &pci->dev;
ret = pcim_enable_device(pci);
if (ret) {
dev_err(dev, "failed to enable pci device\n");
return -ENODEV;
}
pci_set_master(pci);
dwc = devm_kzalloc(dev, sizeof(*dwc), GFP_KERNEL);
if (!dwc)
return -ENOMEM;
dwc->dwc3 = platform_device_alloc("dwc3", PLATFORM_DEVID_AUTO);
if (!dwc->dwc3)
return -ENOMEM;
memset(res, 0x00, sizeof(struct resource) * ARRAY_SIZE(res));
res[0].start = pci_resource_start(pci, 0);
res[0].end = pci_resource_end(pci, 0);
res[0].name = "dwc_usb3";
res[0].flags = IORESOURCE_MEM;
res[1].start = pci->irq;
res[1].name = "dwc_usb3";
res[1].flags = IORESOURCE_IRQ;
ret = platform_device_add_resources(dwc->dwc3, res, ARRAY_SIZE(res));
if (ret) {
dev_err(dev, "couldn't add resources to dwc3 device\n");
goto err;
}
dwc->pci = pci;
dwc->dwc3->dev.parent = dev;
ACPI_COMPANION_SET(&dwc->dwc3->dev, ACPI_COMPANION(dev));
ret = dwc3_pci_quirks(dwc, (void *)id->driver_data);
if (ret)
goto err;
ret = platform_device_add(dwc->dwc3);
if (ret) {
dev_err(dev, "failed to register dwc3 device\n");
goto err;
}
device_init_wakeup(dev, true);
pci_set_drvdata(pci, dwc);
pm_runtime_put(dev);
#ifdef CONFIG_PM
INIT_WORK(&dwc->wakeup_work, dwc3_pci_resume_work);
#endif
return 0;
err:
device_remove_software_node(&dwc->dwc3->dev);
platform_device_put(dwc->dwc3);
return ret;
}
static void dwc3_pci_remove(struct pci_dev *pci)
{
struct dwc3_pci *dwc = pci_get_drvdata(pci);
struct pci_dev *pdev = dwc->pci;
if (pdev->device == PCI_DEVICE_ID_INTEL_BYT)
gpiod_remove_lookup_table(&platform_bytcr_gpios);
#ifdef CONFIG_PM
cancel_work_sync(&dwc->wakeup_work);
#endif
device_init_wakeup(&pci->dev, false);
pm_runtime_get(&pci->dev);
device_remove_software_node(&dwc->dwc3->dev);
platform_device_unregister(dwc->dwc3);
}
static const struct pci_device_id dwc3_pci_id_table[] = {
{ PCI_DEVICE_DATA(INTEL, BSW, &dwc3_pci_intel_swnode) },
{ PCI_DEVICE_DATA(INTEL, BYT, &dwc3_pci_intel_byt_swnode) },
{ PCI_DEVICE_DATA(INTEL, MRFLD, &dwc3_pci_intel_mrfld_swnode) },
{ PCI_DEVICE_DATA(INTEL, CMLLP, &dwc3_pci_intel_swnode) },
{ PCI_DEVICE_DATA(INTEL, CMLH, &dwc3_pci_intel_swnode) },
{ PCI_DEVICE_DATA(INTEL, SPTLP, &dwc3_pci_intel_swnode) },
{ PCI_DEVICE_DATA(INTEL, SPTH, &dwc3_pci_intel_swnode) },
{ PCI_DEVICE_DATA(INTEL, BXT, &dwc3_pci_intel_swnode) },
{ PCI_DEVICE_DATA(INTEL, BXT_M, &dwc3_pci_intel_swnode) },
{ PCI_DEVICE_DATA(INTEL, APL, &dwc3_pci_intel_swnode) },
{ PCI_DEVICE_DATA(INTEL, KBP, &dwc3_pci_intel_swnode) },
{ PCI_DEVICE_DATA(INTEL, GLK, &dwc3_pci_intel_swnode) },
{ PCI_DEVICE_DATA(INTEL, CNPLP, &dwc3_pci_intel_swnode) },
{ PCI_DEVICE_DATA(INTEL, CNPH, &dwc3_pci_intel_swnode) },
{ PCI_DEVICE_DATA(INTEL, CNPV, &dwc3_pci_intel_swnode) },
{ PCI_DEVICE_DATA(INTEL, ICLLP, &dwc3_pci_intel_swnode) },
{ PCI_DEVICE_DATA(INTEL, EHL, &dwc3_pci_intel_swnode) },
{ PCI_DEVICE_DATA(INTEL, TGPLP, &dwc3_pci_intel_swnode) },
{ PCI_DEVICE_DATA(INTEL, TGPH, &dwc3_pci_intel_swnode) },
{ PCI_DEVICE_DATA(INTEL, JSP, &dwc3_pci_intel_swnode) },
{ PCI_DEVICE_DATA(INTEL, ADL, &dwc3_pci_intel_swnode) },
{ PCI_DEVICE_DATA(INTEL, ADL_PCH, &dwc3_pci_intel_swnode) },
{ PCI_DEVICE_DATA(INTEL, ADLN, &dwc3_pci_intel_swnode) },
{ PCI_DEVICE_DATA(INTEL, ADLN_PCH, &dwc3_pci_intel_swnode) },
{ PCI_DEVICE_DATA(INTEL, ADLS, &dwc3_pci_intel_swnode) },
{ PCI_DEVICE_DATA(INTEL, RPL, &dwc3_pci_intel_swnode) },
{ PCI_DEVICE_DATA(INTEL, RPLS, &dwc3_pci_intel_swnode) },
{ PCI_DEVICE_DATA(INTEL, MTLM, &dwc3_pci_intel_swnode) },
{ PCI_DEVICE_DATA(INTEL, MTLP, &dwc3_pci_intel_swnode) },
{ PCI_DEVICE_DATA(INTEL, MTL, &dwc3_pci_intel_swnode) },
{ PCI_DEVICE_DATA(INTEL, MTLS, &dwc3_pci_intel_swnode) },
{ PCI_DEVICE_DATA(INTEL, ARLH_PCH, &dwc3_pci_intel_swnode) },
{ PCI_DEVICE_DATA(INTEL, TGL, &dwc3_pci_intel_swnode) },
{ PCI_DEVICE_DATA(INTEL, PTLH, &dwc3_pci_intel_swnode) },
{ PCI_DEVICE_DATA(INTEL, PTLH_PCH, &dwc3_pci_intel_swnode) },
{ PCI_DEVICE_DATA(INTEL, PTLU, &dwc3_pci_intel_swnode) },
{ PCI_DEVICE_DATA(INTEL, PTLU_PCH, &dwc3_pci_intel_swnode) },
{ PCI_DEVICE_DATA(AMD, NL_USB, &dwc3_pci_amd_swnode) },
{ PCI_DEVICE_DATA(AMD, MR, &dwc3_pci_amd_mr_swnode) },
{ } /* Terminating Entry */
};
MODULE_DEVICE_TABLE(pci, dwc3_pci_id_table);
#if defined(CONFIG_PM) || defined(CONFIG_PM_SLEEP)
static int dwc3_pci_dsm(struct dwc3_pci *dwc, int param)
{
union acpi_object *obj;
union acpi_object tmp;
union acpi_object argv4 = ACPI_INIT_DSM_ARGV4(1, &tmp);
if (!dwc->has_dsm_for_pm)
return 0;
tmp.type = ACPI_TYPE_INTEGER;
tmp.integer.value = param;
obj = acpi_evaluate_dsm(ACPI_HANDLE(&dwc->pci->dev), &dwc->guid,
1, PCI_INTEL_BXT_FUNC_PMU_PWR, &argv4);
if (!obj) {
dev_err(&dwc->pci->dev, "failed to evaluate _DSM\n");
return -EIO;
}
ACPI_FREE(obj);
return 0;
}
#endif /* CONFIG_PM || CONFIG_PM_SLEEP */
#ifdef CONFIG_PM
static int dwc3_pci_runtime_suspend(struct device *dev)
{
struct dwc3_pci *dwc = dev_get_drvdata(dev);
if (device_can_wakeup(dev))
return dwc3_pci_dsm(dwc, PCI_INTEL_BXT_STATE_D3);
return -EBUSY;
}
static int dwc3_pci_runtime_resume(struct device *dev)
{
struct dwc3_pci *dwc = dev_get_drvdata(dev);
int ret;
ret = dwc3_pci_dsm(dwc, PCI_INTEL_BXT_STATE_D0);
if (ret)
return ret;
queue_work(pm_wq, &dwc->wakeup_work);
return 0;
}
#endif /* CONFIG_PM */
#ifdef CONFIG_PM_SLEEP
static int dwc3_pci_suspend(struct device *dev)
{
struct dwc3_pci *dwc = dev_get_drvdata(dev);
return dwc3_pci_dsm(dwc, PCI_INTEL_BXT_STATE_D3);
}
static int dwc3_pci_resume(struct device *dev)
{
struct dwc3_pci *dwc = dev_get_drvdata(dev);
return dwc3_pci_dsm(dwc, PCI_INTEL_BXT_STATE_D0);
}
#endif /* CONFIG_PM_SLEEP */
static const struct dev_pm_ops dwc3_pci_dev_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(dwc3_pci_suspend, dwc3_pci_resume)
SET_RUNTIME_PM_OPS(dwc3_pci_runtime_suspend, dwc3_pci_runtime_resume,
NULL)
};
static struct pci_driver dwc3_pci_driver = {
.name = "dwc3-pci",
.id_table = dwc3_pci_id_table,
.probe = dwc3_pci_probe,
.remove = dwc3_pci_remove,
.driver = {
.pm = &dwc3_pci_dev_pm_ops,
}
};
MODULE_AUTHOR("Felipe Balbi <[email protected]>");
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("DesignWare USB3 PCI Glue Layer");
module_pci_driver(dwc3_pci_driver);
Codebase Browser
linux