// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
/*
* platform.c - DesignWare HS OTG Controller platform driver
*
* Copyright (C) Matthijs Kooijman <[email protected]>
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/clk.h>
#include <linux/device.h>
#include <linux/dma-mapping.h>
#include <linux/of.h>
#include <linux/mutex.h>
#include <linux/platform_device.h>
#include <linux/phy/phy.h>
#include <linux/platform_data/s3c-hsotg.h>
#include <linux/reset.h>
#include <linux/usb/of.h>
#include "core.h"
#include "hcd.h"
#include "debug.h"
static const char dwc2_driver_name[] = "dwc2";
/*
* Check the dr_mode against the module configuration and hardware
* capabilities.
*
* The hardware, module, and dr_mode, can each be set to host, device,
* or otg. Check that all these values are compatible and adjust the
* value of dr_mode if possible.
*
* actual
* HW MOD dr_mode dr_mode
* ------------------------------
* HST HST any : HST
* HST DEV any : ---
* HST OTG any : HST
*
* DEV HST any : ---
* DEV DEV any : DEV
* DEV OTG any : DEV
*
* OTG HST any : HST
* OTG DEV any : DEV
* OTG OTG any : dr_mode
*/
static int dwc2_get_dr_mode(struct dwc2_hsotg *hsotg)
{
enum usb_dr_mode mode;
hsotg->dr_mode = usb_get_dr_mode(hsotg->dev);
if (hsotg->dr_mode == USB_DR_MODE_UNKNOWN)
hsotg->dr_mode = USB_DR_MODE_OTG;
mode = hsotg->dr_mode;
if (dwc2_hw_is_device(hsotg)) {
if (IS_ENABLED(CONFIG_USB_DWC2_HOST)) {
dev_err(hsotg->dev,
"Controller does not support host mode.\n");
return -EINVAL;
}
mode = USB_DR_MODE_PERIPHERAL;
} else if (dwc2_hw_is_host(hsotg)) {
if (IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL)) {
dev_err(hsotg->dev,
"Controller does not support device mode.\n");
return -EINVAL;
}
mode = USB_DR_MODE_HOST;
} else {
if (IS_ENABLED(CONFIG_USB_DWC2_HOST))
mode = USB_DR_MODE_HOST;
else if (IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL))
mode = USB_DR_MODE_PERIPHERAL;
}
if (mode != hsotg->dr_mode) {
dev_warn(hsotg->dev,
"Configuration mismatch. dr_mode forced to %s\n",
mode == USB_DR_MODE_HOST ? "host" : "device");
hsotg->dr_mode = mode;
}
return 0;
}
static int __dwc2_lowlevel_hw_enable(struct dwc2_hsotg *hsotg)
{
struct platform_device *pdev = to_platform_device(hsotg->dev);
int ret;
ret = regulator_bulk_enable(ARRAY_SIZE(hsotg->supplies),
hsotg->supplies);
if (ret)
return ret;
if (hsotg->utmi_clk) {
ret = clk_prepare_enable(hsotg->utmi_clk);
if (ret)
goto err_dis_reg;
}
if (hsotg->clk) {
ret = clk_prepare_enable(hsotg->clk);
if (ret)
goto err_dis_utmi_clk;
}
if (hsotg->uphy) {
ret = usb_phy_init(hsotg->uphy);
} else if (hsotg->plat && hsotg->plat->phy_init) {
ret = hsotg->plat->phy_init(pdev, hsotg->plat->phy_type);
} else {
ret = phy_init(hsotg->phy);
if (ret == 0) {
ret = phy_power_on(hsotg->phy);
if (ret)
phy_exit(hsotg->phy);
}
}
if (ret)
goto err_dis_clk;
return 0;
err_dis_clk:
if (hsotg->clk)
clk_disable_unprepare(hsotg->clk);
err_dis_utmi_clk:
if (hsotg->utmi_clk)
clk_disable_unprepare(hsotg->utmi_clk);
err_dis_reg:
regulator_bulk_disable(ARRAY_SIZE(hsotg->supplies), hsotg->supplies);
return ret;
}
/**
* dwc2_lowlevel_hw_enable - enable platform lowlevel hw resources
* @hsotg: The driver state
*
* A wrapper for platform code responsible for controlling
* low-level USB platform resources (phy, clock, regulators)
*/
int dwc2_lowlevel_hw_enable(struct dwc2_hsotg *hsotg)
{
int ret = __dwc2_lowlevel_hw_enable(hsotg);
if (ret == 0)
hsotg->ll_hw_enabled = true;
return ret;
}
static int __dwc2_lowlevel_hw_disable(struct dwc2_hsotg *hsotg)
{
struct platform_device *pdev = to_platform_device(hsotg->dev);
int ret = 0;
if (hsotg->uphy) {
usb_phy_shutdown(hsotg->uphy);
} else if (hsotg->plat && hsotg->plat->phy_exit) {
ret = hsotg->plat->phy_exit(pdev, hsotg->plat->phy_type);
} else {
ret = phy_power_off(hsotg->phy);
if (ret == 0)
ret = phy_exit(hsotg->phy);
}
if (ret)
return ret;
if (hsotg->clk)
clk_disable_unprepare(hsotg->clk);
if (hsotg->utmi_clk)
clk_disable_unprepare(hsotg->utmi_clk);
return regulator_bulk_disable(ARRAY_SIZE(hsotg->supplies), hsotg->supplies);
}
/**
* dwc2_lowlevel_hw_disable - disable platform lowlevel hw resources
* @hsotg: The driver state
*
* A wrapper for platform code responsible for controlling
* low-level USB platform resources (phy, clock, regulators)
*/
int dwc2_lowlevel_hw_disable(struct dwc2_hsotg *hsotg)
{
int ret = __dwc2_lowlevel_hw_disable(hsotg);
if (ret == 0)
hsotg->ll_hw_enabled = false;
return ret;
}
static void dwc2_reset_control_assert(void *data)
{
reset_control_assert(data);
}
static int dwc2_lowlevel_hw_init(struct dwc2_hsotg *hsotg)
{
int i, ret;
hsotg->reset = devm_reset_control_get_optional(hsotg->dev, "dwc2");
if (IS_ERR(hsotg->reset))
return dev_err_probe(hsotg->dev, PTR_ERR(hsotg->reset),
"error getting reset control\n");
reset_control_deassert(hsotg->reset);
ret = devm_add_action_or_reset(hsotg->dev, dwc2_reset_control_assert,
hsotg->reset);
if (ret)
return ret;
hsotg->reset_ecc = devm_reset_control_get_optional(hsotg->dev, "dwc2-ecc");
if (IS_ERR(hsotg->reset_ecc))
return dev_err_probe(hsotg->dev, PTR_ERR(hsotg->reset_ecc),
"error getting reset control for ecc\n");
reset_control_deassert(hsotg->reset_ecc);
ret = devm_add_action_or_reset(hsotg->dev, dwc2_reset_control_assert,
hsotg->reset_ecc);
if (ret)
return ret;
/*
* Attempt to find a generic PHY, then look for an old style
* USB PHY and then fall back to pdata
*/
hsotg->phy = devm_phy_get(hsotg->dev, "usb2-phy");
if (IS_ERR(hsotg->phy)) {
ret = PTR_ERR(hsotg->phy);
switch (ret) {
case -ENODEV:
case -ENOSYS:
hsotg->phy = NULL;
break;
default:
return dev_err_probe(hsotg->dev, ret, "error getting phy\n");
}
}
if (!hsotg->phy) {
hsotg->uphy = devm_usb_get_phy(hsotg->dev, USB_PHY_TYPE_USB2);
if (IS_ERR(hsotg->uphy)) {
ret = PTR_ERR(hsotg->uphy);
switch (ret) {
case -ENODEV:
case -ENXIO:
hsotg->uphy = NULL;
break;
default:
return dev_err_probe(hsotg->dev, ret, "error getting usb phy\n");
}
}
}
hsotg->plat = dev_get_platdata(hsotg->dev);
/* Clock */
hsotg->clk = devm_clk_get_optional(hsotg->dev, "otg");
if (IS_ERR(hsotg->clk))
return dev_err_probe(hsotg->dev, PTR_ERR(hsotg->clk), "cannot get otg clock\n");
hsotg->utmi_clk = devm_clk_get_optional(hsotg->dev, "utmi");
if (IS_ERR(hsotg->utmi_clk))
return dev_err_probe(hsotg->dev, PTR_ERR(hsotg->utmi_clk),
"cannot get utmi clock\n");
/* Regulators */
for (i = 0; i < ARRAY_SIZE(hsotg->supplies); i++)
hsotg->supplies[i].supply = dwc2_hsotg_supply_names[i];
ret = devm_regulator_bulk_get(hsotg->dev, ARRAY_SIZE(hsotg->supplies),
hsotg->supplies);
if (ret)
return dev_err_probe(hsotg->dev, ret, "failed to request supplies\n");
return 0;
}
/**
* dwc2_driver_remove() - Called when the DWC_otg core is unregistered with the
* DWC_otg driver
*
* @dev: Platform device
*
* This routine is called, for example, when the rmmod command is executed. The
* device may or may not be electrically present. If it is present, the driver
* stops device processing. Any resources used on behalf of this device are
* freed.
*/
static void dwc2_driver_remove(struct platform_device *dev)
{
struct dwc2_hsotg *hsotg = platform_get_drvdata(dev);
struct dwc2_gregs_backup *gr;
int ret = 0;
gr = &hsotg->gr_backup;
/* Exit Hibernation when driver is removed. */
if (hsotg->hibernated) {
if (gr->gotgctl & GOTGCTL_CURMODE_HOST)
ret = dwc2_exit_hibernation(hsotg, 0, 0, 1);
else
ret = dwc2_exit_hibernation(hsotg, 0, 0, 0);
if (ret)
dev_err(hsotg->dev,
"exit hibernation failed.\n");
}
/* Exit Partial Power Down when driver is removed. */
if (hsotg->in_ppd) {
ret = dwc2_exit_partial_power_down(hsotg, 0, true);
if (ret)
dev_err(hsotg->dev,
"exit partial_power_down failed\n");
}
/* Exit clock gating when driver is removed. */
if (hsotg->params.power_down == DWC2_POWER_DOWN_PARAM_NONE &&
hsotg->bus_suspended && !hsotg->params.no_clock_gating) {
if (dwc2_is_device_mode(hsotg))
dwc2_gadget_exit_clock_gating(hsotg, 0);
else
dwc2_host_exit_clock_gating(hsotg, 0);
}
dwc2_debugfs_exit(hsotg);
if (hsotg->hcd_enabled)
dwc2_hcd_remove(hsotg);
if (hsotg->gadget_enabled)
dwc2_hsotg_remove(hsotg);
dwc2_drd_exit(hsotg);
if (hsotg->params.activate_stm_id_vb_detection)
regulator_disable(hsotg->usb33d);
if (hsotg->ll_hw_enabled)
dwc2_lowlevel_hw_disable(hsotg);
}
/**
* dwc2_driver_shutdown() - Called on device shutdown
*
* @dev: Platform device
*
* In specific conditions (involving usb hubs) dwc2 devices can create a
* lot of interrupts, even to the point of overwhelming devices running
* at low frequencies. Some devices need to do special clock handling
* at shutdown-time which may bring the system clock below the threshold
* of being able to handle the dwc2 interrupts. Disabling dwc2-irqs
* prevents reboots/poweroffs from getting stuck in such cases.
*/
static void dwc2_driver_shutdown(struct platform_device *dev)
{
struct dwc2_hsotg *hsotg = platform_get_drvdata(dev);
dwc2_disable_global_interrupts(hsotg);
synchronize_irq(hsotg->irq);
}
/**
* dwc2_check_core_endianness() - Returns true if core and AHB have
* opposite endianness.
* @hsotg: Programming view of the DWC_otg controller.
*/
static bool dwc2_check_core_endianness(struct dwc2_hsotg *hsotg)
{
u32 snpsid;
snpsid = ioread32(hsotg->regs + GSNPSID);
if ((snpsid & GSNPSID_ID_MASK) == DWC2_OTG_ID ||
(snpsid & GSNPSID_ID_MASK) == DWC2_FS_IOT_ID ||
(snpsid & GSNPSID_ID_MASK) == DWC2_HS_IOT_ID)
return false;
return true;
}
/**
* dwc2_check_core_version() - Check core version
*
* @hsotg: Programming view of the DWC_otg controller
*
*/
int dwc2_check_core_version(struct dwc2_hsotg *hsotg)
{
struct dwc2_hw_params *hw = &hsotg->hw_params;
/*
* Attempt to ensure this device is really a DWC_otg Controller.
* Read and verify the GSNPSID register contents. The value should be
* 0x45f4xxxx, 0x5531xxxx or 0x5532xxxx
*/
hw->snpsid = dwc2_readl(hsotg, GSNPSID);
if ((hw->snpsid & GSNPSID_ID_MASK) != DWC2_OTG_ID &&
(hw->snpsid & GSNPSID_ID_MASK) != DWC2_FS_IOT_ID &&
(hw->snpsid & GSNPSID_ID_MASK) != DWC2_HS_IOT_ID) {
dev_err(hsotg->dev, "Bad value for GSNPSID: 0x%08x\n",
hw->snpsid);
return -ENODEV;
}
dev_dbg(hsotg->dev, "Core Release: %1x.%1x%1x%1x (snpsid=%x)\n",
hw->snpsid >> 12 & 0xf, hw->snpsid >> 8 & 0xf,
hw->snpsid >> 4 & 0xf, hw->snpsid & 0xf, hw->snpsid);
return 0;
}
/**
* dwc2_driver_probe() - Called when the DWC_otg core is bound to the DWC_otg
* driver
*
* @dev: Platform device
*
* This routine creates the driver components required to control the device
* (core, HCD, and PCD) and initializes the device. The driver components are
* stored in a dwc2_hsotg structure. A reference to the dwc2_hsotg is saved
* in the device private data. This allows the driver to access the dwc2_hsotg
* structure on subsequent calls to driver methods for this device.
*/
static int dwc2_driver_probe(struct platform_device *dev)
{
struct dwc2_hsotg *hsotg;
struct resource *res;
int retval;
hsotg = devm_kzalloc(&dev->dev, sizeof(*hsotg), GFP_KERNEL);
if (!hsotg)
return -ENOMEM;
hsotg->dev = &dev->dev;
/*
* Use reasonable defaults so platforms don't have to provide these.
*/
if (!dev->dev.dma_mask)
dev->dev.dma_mask = &dev->dev.coherent_dma_mask;
retval = dma_set_coherent_mask(&dev->dev, DMA_BIT_MASK(32));
if (retval) {
dev_err(&dev->dev, "can't set coherent DMA mask: %d\n", retval);
return retval;
}
hsotg->regs = devm_platform_get_and_ioremap_resource(dev, 0, &res);
if (IS_ERR(hsotg->regs))
return PTR_ERR(hsotg->regs);
dev_dbg(&dev->dev, "mapped PA %08lx to VA %p\n",
(unsigned long)res->start, hsotg->regs);
retval = dwc2_lowlevel_hw_init(hsotg);
if (retval)
return retval;
spin_lock_init(&hsotg->lock);
hsotg->vbus_supply = devm_regulator_get_optional(hsotg->dev, "vbus");
if (IS_ERR(hsotg->vbus_supply)) {
retval = PTR_ERR(hsotg->vbus_supply);
hsotg->vbus_supply = NULL;
if (retval != -ENODEV)
return retval;
}
retval = dwc2_lowlevel_hw_enable(hsotg);
if (retval)
return retval;
hsotg->needs_byte_swap = dwc2_check_core_endianness(hsotg);
retval = dwc2_get_dr_mode(hsotg);
if (retval)
goto error;
hsotg->need_phy_for_wake =
of_property_read_bool(dev->dev.of_node,
"snps,need-phy-for-wake");
/*
* Before performing any core related operations
* check core version.
*/
retval = dwc2_check_core_version(hsotg);
if (retval)
goto error;
/*
* Reset before dwc2_get_hwparams() then it could get power-on real
* reset value form registers.
*/
retval = dwc2_core_reset(hsotg, false);
if (retval)
goto error;
/* Detect config values from hardware */
retval = dwc2_get_hwparams(hsotg);
if (retval)
goto error;
hsotg->irq = platform_get_irq(dev, 0);
if (hsotg->irq < 0) {
retval = hsotg->irq;
goto error;
}
dev_dbg(hsotg->dev, "registering common handler for irq%d\n",
hsotg->irq);
retval = devm_request_irq(hsotg->dev, hsotg->irq,
dwc2_handle_common_intr, IRQF_SHARED,
dev_name(hsotg->dev), hsotg);
if (retval)
goto error;
/*
* For OTG cores, set the force mode bits to reflect the value
* of dr_mode. Force mode bits should not be touched at any
* other time after this.
*/
dwc2_force_dr_mode(hsotg);
retval = dwc2_init_params(hsotg);
if (retval)
goto error;
if (hsotg->params.activate_stm_id_vb_detection) {
u32 ggpio;
hsotg->usb33d = devm_regulator_get(hsotg->dev, "usb33d");
if (IS_ERR(hsotg->usb33d)) {
retval = PTR_ERR(hsotg->usb33d);
dev_err_probe(hsotg->dev, retval, "failed to request usb33d supply\n");
goto error;
}
retval = regulator_enable(hsotg->usb33d);
if (retval) {
dev_err_probe(hsotg->dev, retval, "failed to enable usb33d supply\n");
goto error;
}
ggpio = dwc2_readl(hsotg, GGPIO);
ggpio |= GGPIO_STM32_OTG_GCCFG_IDEN;
ggpio |= GGPIO_STM32_OTG_GCCFG_VBDEN;
dwc2_writel(hsotg, ggpio, GGPIO);
/* ID/VBUS detection startup time */
usleep_range(5000, 7000);
}
retval = dwc2_drd_init(hsotg);
if (retval) {
dev_err_probe(hsotg->dev, retval, "failed to initialize dual-role\n");
goto error_init;
}
if (hsotg->dr_mode != USB_DR_MODE_HOST) {
retval = dwc2_gadget_init(hsotg);
if (retval)
goto error_drd;
hsotg->gadget_enabled = 1;
}
/*
* If we need PHY for wakeup we must be wakeup capable.
* When we have a device that can wake without the PHY we
* can adjust this condition.
*/
if (hsotg->need_phy_for_wake)
device_set_wakeup_capable(&dev->dev, true);
hsotg->reset_phy_on_wake =
of_property_read_bool(dev->dev.of_node,
"snps,reset-phy-on-wake");
if (hsotg->reset_phy_on_wake && !hsotg->phy) {
dev_warn(hsotg->dev,
"Quirk reset-phy-on-wake only supports generic PHYs\n");
hsotg->reset_phy_on_wake = false;
}
if (hsotg->dr_mode != USB_DR_MODE_PERIPHERAL) {
retval = dwc2_hcd_init(hsotg);
if (retval) {
if (hsotg->gadget_enabled)
dwc2_hsotg_remove(hsotg);
goto error_drd;
}
hsotg->hcd_enabled = 1;
}
platform_set_drvdata(dev, hsotg);
hsotg->hibernated = 0;
dwc2_debugfs_init(hsotg);
/* Gadget code manages lowlevel hw on its own */
if (hsotg->dr_mode == USB_DR_MODE_PERIPHERAL)
dwc2_lowlevel_hw_disable(hsotg);
#if IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL) || \
IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE)
/* Postponed adding a new gadget to the udc class driver list */
if (hsotg->gadget_enabled) {
retval = usb_add_gadget_udc(hsotg->dev, &hsotg->gadget);
if (retval) {
hsotg->gadget.udc = NULL;
dwc2_hsotg_remove(hsotg);
goto error_debugfs;
}
}
#endif /* CONFIG_USB_DWC2_PERIPHERAL || CONFIG_USB_DWC2_DUAL_ROLE */
return 0;
#if IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL) || \
IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE)
error_debugfs:
dwc2_debugfs_exit(hsotg);
if (hsotg->hcd_enabled)
dwc2_hcd_remove(hsotg);
#endif
error_drd:
dwc2_drd_exit(hsotg);
error_init:
if (hsotg->params.activate_stm_id_vb_detection)
regulator_disable(hsotg->usb33d);
error:
if (hsotg->ll_hw_enabled)
dwc2_lowlevel_hw_disable(hsotg);
return retval;
}
static int __maybe_unused dwc2_suspend(struct device *dev)
{
struct dwc2_hsotg *dwc2 = dev_get_drvdata(dev);
bool is_device_mode = dwc2_is_device_mode(dwc2);
int ret = 0;
if (is_device_mode)
dwc2_hsotg_suspend(dwc2);
dwc2_drd_suspend(dwc2);
if (dwc2->params.activate_stm_id_vb_detection) {
unsigned long flags;
u32 ggpio, gotgctl;
/*
* Need to force the mode to the current mode to avoid Mode
* Mismatch Interrupt when ID detection will be disabled.
*/
dwc2_force_mode(dwc2, !is_device_mode);
spin_lock_irqsave(&dwc2->lock, flags);
gotgctl = dwc2_readl(dwc2, GOTGCTL);
/* bypass debounce filter, enable overrides */
gotgctl |= GOTGCTL_DBNCE_FLTR_BYPASS;
gotgctl |= GOTGCTL_BVALOEN | GOTGCTL_AVALOEN;
/* Force A / B session if needed */
if (gotgctl & GOTGCTL_ASESVLD)
gotgctl |= GOTGCTL_AVALOVAL;
if (gotgctl & GOTGCTL_BSESVLD)
gotgctl |= GOTGCTL_BVALOVAL;
dwc2_writel(dwc2, gotgctl, GOTGCTL);
spin_unlock_irqrestore(&dwc2->lock, flags);
ggpio = dwc2_readl(dwc2, GGPIO);
ggpio &= ~GGPIO_STM32_OTG_GCCFG_IDEN;
ggpio &= ~GGPIO_STM32_OTG_GCCFG_VBDEN;
dwc2_writel(dwc2, ggpio, GGPIO);
regulator_disable(dwc2->usb33d);
}
if (dwc2->ll_hw_enabled &&
(is_device_mode || dwc2_host_can_poweroff_phy(dwc2))) {
ret = __dwc2_lowlevel_hw_disable(dwc2);
dwc2->phy_off_for_suspend = true;
}
return ret;
}
static int __maybe_unused dwc2_resume(struct device *dev)
{
struct dwc2_hsotg *dwc2 = dev_get_drvdata(dev);
int ret = 0;
if (dwc2->phy_off_for_suspend && dwc2->ll_hw_enabled) {
ret = __dwc2_lowlevel_hw_enable(dwc2);
if (ret)
return ret;
}
dwc2->phy_off_for_suspend = false;
if (dwc2->params.activate_stm_id_vb_detection) {
unsigned long flags;
u32 ggpio, gotgctl;
ret = regulator_enable(dwc2->usb33d);
if (ret)
return ret;
ggpio = dwc2_readl(dwc2, GGPIO);
ggpio |= GGPIO_STM32_OTG_GCCFG_IDEN;
ggpio |= GGPIO_STM32_OTG_GCCFG_VBDEN;
dwc2_writel(dwc2, ggpio, GGPIO);
/* ID/VBUS detection startup time */
usleep_range(5000, 7000);
spin_lock_irqsave(&dwc2->lock, flags);
gotgctl = dwc2_readl(dwc2, GOTGCTL);
gotgctl &= ~GOTGCTL_DBNCE_FLTR_BYPASS;
gotgctl &= ~(GOTGCTL_BVALOEN | GOTGCTL_AVALOEN |
GOTGCTL_BVALOVAL | GOTGCTL_AVALOVAL);
dwc2_writel(dwc2, gotgctl, GOTGCTL);
spin_unlock_irqrestore(&dwc2->lock, flags);
}
if (!dwc2->role_sw) {
/* Need to restore FORCEDEVMODE/FORCEHOSTMODE */
dwc2_force_dr_mode(dwc2);
} else {
dwc2_drd_resume(dwc2);
}
if (dwc2_is_device_mode(dwc2))
ret = dwc2_hsotg_resume(dwc2);
return ret;
}
static const struct dev_pm_ops dwc2_dev_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(dwc2_suspend, dwc2_resume)
};
static struct platform_driver dwc2_platform_driver = {
.driver = {
.name = dwc2_driver_name,
.of_match_table = dwc2_of_match_table,
.acpi_match_table = ACPI_PTR(dwc2_acpi_match),
.pm = &dwc2_dev_pm_ops,
},
.probe = dwc2_driver_probe,
.remove_new = dwc2_driver_remove,
.shutdown = dwc2_driver_shutdown,
};
module_platform_driver(dwc2_platform_driver);
Codebase Browser
linux