// SPDX-License-Identifier: GPL-2.0-only
/*
* Input driver for resistor ladder connected on ADC
*
* Copyright (c) 2016 Alexandre Belloni
*/
#include <linux/err.h>
#include <linux/iio/consumer.h>
#include <linux/iio/types.h>
#include <linux/input.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/property.h>
#include <linux/slab.h>
struct adc_keys_button {
u32 voltage;
u32 keycode;
};
struct adc_keys_state {
struct iio_channel *channel;
u32 num_keys;
u32 last_key;
u32 keyup_voltage;
const struct adc_keys_button *map;
};
static void adc_keys_poll(struct input_dev *input)
{
struct adc_keys_state *st = input_get_drvdata(input);
int i, value, ret;
u32 diff, closest = 0xffffffff;
int keycode = 0;
ret = iio_read_channel_processed(st->channel, &value);
if (unlikely(ret < 0)) {
/* Forcibly release key if any was pressed */
value = st->keyup_voltage;
} else {
for (i = 0; i < st->num_keys; i++) {
diff = abs(st->map[i].voltage - value);
if (diff < closest) {
closest = diff;
keycode = st->map[i].keycode;
}
}
}
if (abs(st->keyup_voltage - value) < closest)
keycode = 0;
if (st->last_key && st->last_key != keycode)
input_report_key(input, st->last_key, 0);
if (keycode)
input_report_key(input, keycode, 1);
input_sync(input);
st->last_key = keycode;
}
static int adc_keys_load_keymap(struct device *dev, struct adc_keys_state *st)
{
struct adc_keys_button *map;
int i;
st->num_keys = device_get_child_node_count(dev);
if (st->num_keys == 0) {
dev_err(dev, "keymap is missing\n");
return -EINVAL;
}
map = devm_kmalloc_array(dev, st->num_keys, sizeof(*map), GFP_KERNEL);
if (!map)
return -ENOMEM;
i = 0;
device_for_each_child_node_scoped(dev, child) {
if (fwnode_property_read_u32(child, "press-threshold-microvolt",
&map[i].voltage)) {
dev_err(dev, "Key with invalid or missing voltage\n");
return -EINVAL;
}
map[i].voltage /= 1000;
if (fwnode_property_read_u32(child, "linux,code",
&map[i].keycode)) {
dev_err(dev, "Key with invalid or missing linux,code\n");
return -EINVAL;
}
i++;
}
st->map = map;
return 0;
}
static int adc_keys_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct adc_keys_state *st;
struct input_dev *input;
enum iio_chan_type type;
int i, value;
int error;
st = devm_kzalloc(dev, sizeof(*st), GFP_KERNEL);
if (!st)
return -ENOMEM;
st->channel = devm_iio_channel_get(dev, "buttons");
if (IS_ERR(st->channel))
return PTR_ERR(st->channel);
if (!st->channel->indio_dev)
return -ENXIO;
error = iio_get_channel_type(st->channel, &type);
if (error < 0)
return error;
if (type != IIO_VOLTAGE) {
dev_err(dev, "Incompatible channel type %d\n", type);
return -EINVAL;
}
if (device_property_read_u32(dev, "keyup-threshold-microvolt",
&st->keyup_voltage)) {
dev_err(dev, "Invalid or missing keyup voltage\n");
return -EINVAL;
}
st->keyup_voltage /= 1000;
error = adc_keys_load_keymap(dev, st);
if (error)
return error;
input = devm_input_allocate_device(dev);
if (!input) {
dev_err(dev, "failed to allocate input device\n");
return -ENOMEM;
}
input_set_drvdata(input, st);
input->name = pdev->name;
input->phys = "adc-keys/input0";
input->id.bustype = BUS_HOST;
input->id.vendor = 0x0001;
input->id.product = 0x0001;
input->id.version = 0x0100;
__set_bit(EV_KEY, input->evbit);
for (i = 0; i < st->num_keys; i++)
__set_bit(st->map[i].keycode, input->keybit);
if (device_property_read_bool(dev, "autorepeat"))
__set_bit(EV_REP, input->evbit);
error = input_setup_polling(input, adc_keys_poll);
if (error) {
dev_err(dev, "Unable to set up polling: %d\n", error);
return error;
}
if (!device_property_read_u32(dev, "poll-interval", &value))
input_set_poll_interval(input, value);
error = input_register_device(input);
if (error) {
dev_err(dev, "Unable to register input device: %d\n", error);
return error;
}
return 0;
}
#ifdef CONFIG_OF
static const struct of_device_id adc_keys_of_match[] = {
{ .compatible = "adc-keys", },
{ }
};
MODULE_DEVICE_TABLE(of, adc_keys_of_match);
#endif
static struct platform_driver adc_keys_driver = {
.driver = {
.name = "adc_keys",
.of_match_table = of_match_ptr(adc_keys_of_match),
},
.probe = adc_keys_probe,
};
module_platform_driver(adc_keys_driver);
MODULE_AUTHOR("Alexandre Belloni <[email protected]>");
MODULE_DESCRIPTION("Input driver for resistor ladder connected on ADC");
MODULE_LICENSE("GPL v2");