// SPDX-License-Identifier: GPL-2.0-only
/*
* Elantech Touchpad driver (v6)
*
* Copyright (C) 2007-2009 Arjan Opmeer <[email protected]>
*
* Trademarks are the property of their respective owners.
*/
#include <linux/delay.h>
#include <linux/dmi.h>
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/i2c.h>
#include <linux/input.h>
#include <linux/input/mt.h>
#include <linux/platform_device.h>
#include <linux/serio.h>
#include <linux/libps2.h>
#include <linux/unaligned.h>
#include "psmouse.h"
#include "elantech.h"
#include "elan_i2c.h"
#define elantech_debug(fmt, ...) \
do { \
if (etd->info.debug) \
psmouse_printk(KERN_DEBUG, psmouse, \
fmt, ##__VA_ARGS__); \
} while (0)
/*
* Send a Synaptics style sliced query command
*/
static int synaptics_send_cmd(struct psmouse *psmouse, unsigned char c,
unsigned char *param)
{
if (ps2_sliced_command(&psmouse->ps2dev, c) ||
ps2_command(&psmouse->ps2dev, param, PSMOUSE_CMD_GETINFO)) {
psmouse_err(psmouse, "%s query 0x%02x failed.\n", __func__, c);
return -1;
}
return 0;
}
/*
* V3 and later support this fast command
*/
static int elantech_send_cmd(struct psmouse *psmouse, unsigned char c,
unsigned char *param)
{
struct ps2dev *ps2dev = &psmouse->ps2dev;
if (ps2_command(ps2dev, NULL, ETP_PS2_CUSTOM_COMMAND) ||
ps2_command(ps2dev, NULL, c) ||
ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO)) {
psmouse_err(psmouse, "%s query 0x%02x failed.\n", __func__, c);
return -1;
}
return 0;
}
/*
* A retrying version of ps2_command
*/
static int elantech_ps2_command(struct psmouse *psmouse,
unsigned char *param, int command)
{
struct ps2dev *ps2dev = &psmouse->ps2dev;
struct elantech_data *etd = psmouse->private;
int rc;
int tries = ETP_PS2_COMMAND_TRIES;
do {
rc = ps2_command(ps2dev, param, command);
if (rc == 0)
break;
tries--;
elantech_debug("retrying ps2 command 0x%02x (%d).\n",
command, tries);
msleep(ETP_PS2_COMMAND_DELAY);
} while (tries > 0);
if (rc)
psmouse_err(psmouse, "ps2 command 0x%02x failed.\n", command);
return rc;
}
/*
* Send an Elantech style special command to read 3 bytes from a register
*/
static int elantech_read_reg_params(struct psmouse *psmouse, u8 reg, u8 *param)
{
if (elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
elantech_ps2_command(psmouse, NULL, ETP_REGISTER_READWRITE) ||
elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
elantech_ps2_command(psmouse, NULL, reg) ||
elantech_ps2_command(psmouse, param, PSMOUSE_CMD_GETINFO)) {
psmouse_err(psmouse,
"failed to read register %#02x\n", reg);
return -EIO;
}
return 0;
}
/*
* Send an Elantech style special command to write a register with a parameter
*/
static int elantech_write_reg_params(struct psmouse *psmouse, u8 reg, u8 *param)
{
if (elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
elantech_ps2_command(psmouse, NULL, ETP_REGISTER_READWRITE) ||
elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
elantech_ps2_command(psmouse, NULL, reg) ||
elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
elantech_ps2_command(psmouse, NULL, param[0]) ||
elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
elantech_ps2_command(psmouse, NULL, param[1]) ||
elantech_ps2_command(psmouse, NULL, PSMOUSE_CMD_SETSCALE11)) {
psmouse_err(psmouse,
"failed to write register %#02x with value %#02x%#02x\n",
reg, param[0], param[1]);
return -EIO;
}
return 0;
}
/*
* Send an Elantech style special command to read a value from a register
*/
static int elantech_read_reg(struct psmouse *psmouse, unsigned char reg,
unsigned char *val)
{
struct elantech_data *etd = psmouse->private;
unsigned char param[3];
int rc = 0;
if (reg < 0x07 || reg > 0x26)
return -1;
if (reg > 0x11 && reg < 0x20)
return -1;
switch (etd->info.hw_version) {
case 1:
if (ps2_sliced_command(&psmouse->ps2dev, ETP_REGISTER_READ) ||
ps2_sliced_command(&psmouse->ps2dev, reg) ||
ps2_command(&psmouse->ps2dev, param, PSMOUSE_CMD_GETINFO)) {
rc = -1;
}
break;
case 2:
if (elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
elantech_ps2_command(psmouse, NULL, ETP_REGISTER_READ) ||
elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
elantech_ps2_command(psmouse, NULL, reg) ||
elantech_ps2_command(psmouse, param, PSMOUSE_CMD_GETINFO)) {
rc = -1;
}
break;
case 3 ... 4:
if (elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
elantech_ps2_command(psmouse, NULL, ETP_REGISTER_READWRITE) ||
elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
elantech_ps2_command(psmouse, NULL, reg) ||
elantech_ps2_command(psmouse, param, PSMOUSE_CMD_GETINFO)) {
rc = -1;
}
break;
}
if (rc)
psmouse_err(psmouse, "failed to read register 0x%02x.\n", reg);
else if (etd->info.hw_version != 4)
*val = param[0];
else
*val = param[1];
return rc;
}
/*
* Send an Elantech style special command to write a register with a value
*/
static int elantech_write_reg(struct psmouse *psmouse, unsigned char reg,
unsigned char val)
{
struct elantech_data *etd = psmouse->private;
int rc = 0;
if (reg < 0x07 || reg > 0x26)
return -1;
if (reg > 0x11 && reg < 0x20)
return -1;
switch (etd->info.hw_version) {
case 1:
if (ps2_sliced_command(&psmouse->ps2dev, ETP_REGISTER_WRITE) ||
ps2_sliced_command(&psmouse->ps2dev, reg) ||
ps2_sliced_command(&psmouse->ps2dev, val) ||
ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_SETSCALE11)) {
rc = -1;
}
break;
case 2:
if (elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
elantech_ps2_command(psmouse, NULL, ETP_REGISTER_WRITE) ||
elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
elantech_ps2_command(psmouse, NULL, reg) ||
elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
elantech_ps2_command(psmouse, NULL, val) ||
elantech_ps2_command(psmouse, NULL, PSMOUSE_CMD_SETSCALE11)) {
rc = -1;
}
break;
case 3:
if (elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
elantech_ps2_command(psmouse, NULL, ETP_REGISTER_READWRITE) ||
elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
elantech_ps2_command(psmouse, NULL, reg) ||
elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
elantech_ps2_command(psmouse, NULL, val) ||
elantech_ps2_command(psmouse, NULL, PSMOUSE_CMD_SETSCALE11)) {
rc = -1;
}
break;
case 4:
if (elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
elantech_ps2_command(psmouse, NULL, ETP_REGISTER_READWRITE) ||
elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
elantech_ps2_command(psmouse, NULL, reg) ||
elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
elantech_ps2_command(psmouse, NULL, ETP_REGISTER_READWRITE) ||
elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
elantech_ps2_command(psmouse, NULL, val) ||
elantech_ps2_command(psmouse, NULL, PSMOUSE_CMD_SETSCALE11)) {
rc = -1;
}
break;
}
if (rc)
psmouse_err(psmouse,
"failed to write register 0x%02x with value 0x%02x.\n",
reg, val);
return rc;
}
/*
* Dump a complete mouse movement packet to the syslog
*/
static void elantech_packet_dump(struct psmouse *psmouse)
{
psmouse_printk(KERN_DEBUG, psmouse, "PS/2 packet [%*ph]\n",
psmouse->pktsize, psmouse->packet);
}
/*
* Advertise INPUT_PROP_BUTTONPAD for clickpads. The testing of bit 12 in
* fw_version for this is based on the following fw_version & caps table:
*
* Laptop-model: fw_version: caps: buttons:
* Acer S3 0x461f00 10, 13, 0e clickpad
* Acer S7-392 0x581f01 50, 17, 0d clickpad
* Acer V5-131 0x461f02 01, 16, 0c clickpad
* Acer V5-551 0x461f00 ? clickpad
* Asus K53SV 0x450f01 78, 15, 0c 2 hw buttons
* Asus G46VW 0x460f02 00, 18, 0c 2 hw buttons
* Asus G750JX 0x360f00 00, 16, 0c 2 hw buttons
* Asus TP500LN 0x381f17 10, 14, 0e clickpad
* Asus X750JN 0x381f17 10, 14, 0e clickpad
* Asus UX31 0x361f00 20, 15, 0e clickpad
* Asus UX32VD 0x361f02 00, 15, 0e clickpad
* Avatar AVIU-145A2 0x361f00 ? clickpad
* Fujitsu CELSIUS H760 0x570f02 40, 14, 0c 3 hw buttons (**)
* Fujitsu CELSIUS H780 0x5d0f02 41, 16, 0d 3 hw buttons (**)
* Fujitsu LIFEBOOK E544 0x470f00 d0, 12, 09 2 hw buttons
* Fujitsu LIFEBOOK E546 0x470f00 50, 12, 09 2 hw buttons
* Fujitsu LIFEBOOK E547 0x470f00 50, 12, 09 2 hw buttons
* Fujitsu LIFEBOOK E554 0x570f01 40, 14, 0c 2 hw buttons
* Fujitsu LIFEBOOK E557 0x570f01 40, 14, 0c 2 hw buttons
* Fujitsu T725 0x470f01 05, 12, 09 2 hw buttons
* Fujitsu H730 0x570f00 c0, 14, 0c 3 hw buttons (**)
* Gigabyte U2442 0x450f01 58, 17, 0c 2 hw buttons
* Lenovo L430 0x350f02 b9, 15, 0c 2 hw buttons (*)
* Lenovo L530 0x350f02 b9, 15, 0c 2 hw buttons (*)
* Samsung NF210 0x150b00 78, 14, 0a 2 hw buttons
* Samsung NP770Z5E 0x575f01 10, 15, 0f clickpad
* Samsung NP700Z5B 0x361f06 21, 15, 0f clickpad
* Samsung NP900X3E-A02 0x575f03 ? clickpad
* Samsung NP-QX410 0x851b00 19, 14, 0c clickpad
* Samsung RC512 0x450f00 08, 15, 0c 2 hw buttons
* Samsung RF710 0x450f00 ? 2 hw buttons
* System76 Pangolin 0x250f01 ? 2 hw buttons
* (*) + 3 trackpoint buttons
* (**) + 0 trackpoint buttons
* Note: Lenovo L430 and Lenovo L530 have the same fw_version/caps
*/
static inline int elantech_is_buttonpad(struct elantech_device_info *info)
{
return info->fw_version & 0x001000;
}
/*
* Interpret complete data packets and report absolute mode input events for
* hardware version 1. (4 byte packets)
*/
static void elantech_report_absolute_v1(struct psmouse *psmouse)
{
struct input_dev *dev = psmouse->dev;
struct elantech_data *etd = psmouse->private;
unsigned char *packet = psmouse->packet;
int fingers;
if (etd->info.fw_version < 0x020000) {
/*
* byte 0: D U p1 p2 1 p3 R L
* byte 1: f 0 th tw x9 x8 y9 y8
*/
fingers = ((packet[1] & 0x80) >> 7) +
((packet[1] & 0x30) >> 4);
} else {
/*
* byte 0: n1 n0 p2 p1 1 p3 R L
* byte 1: 0 0 0 0 x9 x8 y9 y8
*/
fingers = (packet[0] & 0xc0) >> 6;
}
if (etd->info.jumpy_cursor) {
if (fingers != 1) {
etd->single_finger_reports = 0;
} else if (etd->single_finger_reports < 2) {
/* Discard first 2 reports of one finger, bogus */
etd->single_finger_reports++;
elantech_debug("discarding packet\n");
return;
}
}
input_report_key(dev, BTN_TOUCH, fingers != 0);
/*
* byte 2: x7 x6 x5 x4 x3 x2 x1 x0
* byte 3: y7 y6 y5 y4 y3 y2 y1 y0
*/
if (fingers) {
input_report_abs(dev, ABS_X,
((packet[1] & 0x0c) << 6) | packet[2]);
input_report_abs(dev, ABS_Y,
etd->y_max - (((packet[1] & 0x03) << 8) | packet[3]));
}
input_report_key(dev, BTN_TOOL_FINGER, fingers == 1);
input_report_key(dev, BTN_TOOL_DOUBLETAP, fingers == 2);
input_report_key(dev, BTN_TOOL_TRIPLETAP, fingers == 3);
psmouse_report_standard_buttons(dev, packet[0]);
if (etd->info.fw_version < 0x020000 &&
(etd->info.capabilities[0] & ETP_CAP_HAS_ROCKER)) {
/* rocker up */
input_report_key(dev, BTN_FORWARD, packet[0] & 0x40);
/* rocker down */
input_report_key(dev, BTN_BACK, packet[0] & 0x80);
}
input_sync(dev);
}
static void elantech_set_slot(struct input_dev *dev, int slot, bool active,
unsigned int x, unsigned int y)
{
input_mt_slot(dev, slot);
input_mt_report_slot_state(dev, MT_TOOL_FINGER, active);
if (active) {
input_report_abs(dev, ABS_MT_POSITION_X, x);
input_report_abs(dev, ABS_MT_POSITION_Y, y);
}
}
/* x1 < x2 and y1 < y2 when two fingers, x = y = 0 when not pressed */
static void elantech_report_semi_mt_data(struct input_dev *dev,
unsigned int num_fingers,
unsigned int x1, unsigned int y1,
unsigned int x2, unsigned int y2)
{
elantech_set_slot(dev, 0, num_fingers != 0, x1, y1);
elantech_set_slot(dev, 1, num_fingers >= 2, x2, y2);
}
/*
* Interpret complete data packets and report absolute mode input events for
* hardware version 2. (6 byte packets)
*/
static void elantech_report_absolute_v2(struct psmouse *psmouse)
{
struct elantech_data *etd = psmouse->private;
struct input_dev *dev = psmouse->dev;
unsigned char *packet = psmouse->packet;
unsigned int fingers, x1 = 0, y1 = 0, x2 = 0, y2 = 0;
unsigned int width = 0, pres = 0;
/* byte 0: n1 n0 . . . . R L */
fingers = (packet[0] & 0xc0) >> 6;
switch (fingers) {
case 3:
/*
* Same as one finger, except report of more than 3 fingers:
* byte 3: n4 . w1 w0 . . . .
*/
if (packet[3] & 0x80)
fingers = 4;
fallthrough;
case 1:
/*
* byte 1: . . . . x11 x10 x9 x8
* byte 2: x7 x6 x5 x4 x4 x2 x1 x0
*/
x1 = ((packet[1] & 0x0f) << 8) | packet[2];
/*
* byte 4: . . . . y11 y10 y9 y8
* byte 5: y7 y6 y5 y4 y3 y2 y1 y0
*/
y1 = etd->y_max - (((packet[4] & 0x0f) << 8) | packet[5]);
pres = (packet[1] & 0xf0) | ((packet[4] & 0xf0) >> 4);
width = ((packet[0] & 0x30) >> 2) | ((packet[3] & 0x30) >> 4);
break;
case 2:
/*
* The coordinate of each finger is reported separately
* with a lower resolution for two finger touches:
* byte 0: . . ay8 ax8 . . . .
* byte 1: ax7 ax6 ax5 ax4 ax3 ax2 ax1 ax0
*/
x1 = (((packet[0] & 0x10) << 4) | packet[1]) << 2;
/* byte 2: ay7 ay6 ay5 ay4 ay3 ay2 ay1 ay0 */
y1 = etd->y_max -
((((packet[0] & 0x20) << 3) | packet[2]) << 2);
/*
* byte 3: . . by8 bx8 . . . .
* byte 4: bx7 bx6 bx5 bx4 bx3 bx2 bx1 bx0
*/
x2 = (((packet[3] & 0x10) << 4) | packet[4]) << 2;
/* byte 5: by7 by8 by5 by4 by3 by2 by1 by0 */
y2 = etd->y_max -
((((packet[3] & 0x20) << 3) | packet[5]) << 2);
/* Unknown so just report sensible values */
pres = 127;
width = 7;
break;
}
input_report_key(dev, BTN_TOUCH, fingers != 0);
if (fingers != 0) {
input_report_abs(dev, ABS_X, x1);
input_report_abs(dev, ABS_Y, y1);
}
elantech_report_semi_mt_data(dev, fingers, x1, y1, x2, y2);
input_report_key(dev, BTN_TOOL_FINGER, fingers == 1);
input_report_key(dev, BTN_TOOL_DOUBLETAP, fingers == 2);
input_report_key(dev, BTN_TOOL_TRIPLETAP, fingers == 3);
input_report_key(dev, BTN_TOOL_QUADTAP, fingers == 4);
psmouse_report_standard_buttons(dev, packet[0]);
if (etd->info.reports_pressure) {
input_report_abs(dev, ABS_PRESSURE, pres);
input_report_abs(dev, ABS_TOOL_WIDTH, width);
}
input_sync(dev);
}
static void elantech_report_trackpoint(struct psmouse *psmouse,
int packet_type)
{
/*
* byte 0: 0 0 sx sy 0 M R L
* byte 1:~sx 0 0 0 0 0 0 0
* byte 2:~sy 0 0 0 0 0 0 0
* byte 3: 0 0 ~sy ~sx 0 1 1 0
* byte 4: x7 x6 x5 x4 x3 x2 x1 x0
* byte 5: y7 y6 y5 y4 y3 y2 y1 y0
*
* x and y are written in two's complement spread
* over 9 bits with sx/sy the relative top bit and
* x7..x0 and y7..y0 the lower bits.
* The sign of y is opposite to what the input driver
* expects for a relative movement
*/
struct elantech_data *etd = psmouse->private;
struct input_dev *tp_dev = etd->tp_dev;
unsigned char *packet = psmouse->packet;
int x, y;
u32 t;
t = get_unaligned_le32(&packet[0]);
switch (t & ~7U) {
case 0x06000030U:
case 0x16008020U:
case 0x26800010U:
case 0x36808000U:
/*
* This firmware misreport coordinates for trackpoint
* occasionally. Discard packets outside of [-127, 127] range
* to prevent cursor jumps.
*/
if (packet[4] == 0x80 || packet[5] == 0x80 ||
packet[1] >> 7 == packet[4] >> 7 ||
packet[2] >> 7 == packet[5] >> 7) {
elantech_debug("discarding packet [%6ph]\n", packet);
break;
}
x = packet[4] - (int)((packet[1]^0x80) << 1);
y = (int)((packet[2]^0x80) << 1) - packet[5];
psmouse_report_standard_buttons(tp_dev, packet[0]);
input_report_rel(tp_dev, REL_X, x);
input_report_rel(tp_dev, REL_Y, y);
input_sync(tp_dev);
break;
default:
/* Dump unexpected packet sequences if debug=1 (default) */
if (etd->info.debug == 1)
elantech_packet_dump(psmouse);
break;
}
}
/*
* Interpret complete data packets and report absolute mode input events for
* hardware version 3. (12 byte packets for two fingers)
*/
static void elantech_report_absolute_v3(struct psmouse *psmouse,
int packet_type)
{
struct input_dev *dev = psmouse->dev;
struct elantech_data *etd = psmouse->private;
unsigned char *packet = psmouse->packet;
unsigned int fingers = 0, x1 = 0, y1 = 0, x2 = 0, y2 = 0;
unsigned int width = 0, pres = 0;
/* byte 0: n1 n0 . . . . R L */
fingers = (packet[0] & 0xc0) >> 6;
switch (fingers) {
case 3:
case 1:
/*
* byte 1: . . . . x11 x10 x9 x8
* byte 2: x7 x6 x5 x4 x4 x2 x1 x0
*/
x1 = ((packet[1] & 0x0f) << 8) | packet[2];
/*
* byte 4: . . . . y11 y10 y9 y8
* byte 5: y7 y6 y5 y4 y3 y2 y1 y0
*/
y1 = etd->y_max - (((packet[4] & 0x0f) << 8) | packet[5]);
break;
case 2:
if (packet_type == PACKET_V3_HEAD) {
/*
* byte 1: . . . . ax11 ax10 ax9 ax8
* byte 2: ax7 ax6 ax5 ax4 ax3 ax2 ax1 ax0
*/
etd->mt[0].x = ((packet[1] & 0x0f) << 8) | packet[2];
/*
* byte 4: . . . . ay11 ay10 ay9 ay8
* byte 5: ay7 ay6 ay5 ay4 ay3 ay2 ay1 ay0
*/
etd->mt[0].y = etd->y_max -
(((packet[4] & 0x0f) << 8) | packet[5]);
/*
* wait for next packet
*/
return;
}
/* packet_type == PACKET_V3_TAIL */
x1 = etd->mt[0].x;
y1 = etd->mt[0].y;
x2 = ((packet[1] & 0x0f) << 8) | packet[2];
y2 = etd->y_max - (((packet[4] & 0x0f) << 8) | packet[5]);
break;
}
pres = (packet[1] & 0xf0) | ((packet[4] & 0xf0) >> 4);
width = ((packet[0] & 0x30) >> 2) | ((packet[3] & 0x30) >> 4);
input_report_key(dev, BTN_TOUCH, fingers != 0);
if (fingers != 0) {
input_report_abs(dev, ABS_X, x1);
input_report_abs(dev, ABS_Y, y1);
}
elantech_report_semi_mt_data(dev, fingers, x1, y1, x2, y2);
input_report_key(dev, BTN_TOOL_FINGER, fingers == 1);
input_report_key(dev, BTN_TOOL_DOUBLETAP, fingers == 2);
input_report_key(dev, BTN_TOOL_TRIPLETAP, fingers == 3);
/* For clickpads map both buttons to BTN_LEFT */
if (elantech_is_buttonpad(&etd->info))
input_report_key(dev, BTN_LEFT, packet[0] & 0x03);
else
psmouse_report_standard_buttons(dev, packet[0]);
input_report_abs(dev, ABS_PRESSURE, pres);
input_report_abs(dev, ABS_TOOL_WIDTH, width);
input_sync(dev);
}
static void elantech_input_sync_v4(struct psmouse *psmouse)
{
struct input_dev *dev = psmouse->dev;
struct elantech_data *etd = psmouse->private;
unsigned char *packet = psmouse->packet;
/* For clickpads map both buttons to BTN_LEFT */
if (elantech_is_buttonpad(&etd->info))
input_report_key(dev, BTN_LEFT, packet[0] & 0x03);
else
psmouse_report_standard_buttons(dev, packet[0]);
input_mt_report_pointer_emulation(dev, true);
input_sync(dev);
}
static void process_packet_status_v4(struct psmouse *psmouse)
{
struct input_dev *dev = psmouse->dev;
unsigned char *packet = psmouse->packet;
unsigned fingers;
int i;
/* notify finger state change */
fingers = packet[1] & 0x1f;
for (i = 0; i < ETP_MAX_FINGERS; i++) {
if ((fingers & (1 << i)) == 0) {
input_mt_slot(dev, i);
input_mt_report_slot_state(dev, MT_TOOL_FINGER, false);
}
}
elantech_input_sync_v4(psmouse);
}
static void process_packet_head_v4(struct psmouse *psmouse)
{
struct input_dev *dev = psmouse->dev;
struct elantech_data *etd = psmouse->private;
unsigned char *packet = psmouse->packet;
int id;
int pres, traces;
id = ((packet[3] & 0xe0) >> 5) - 1;
if (id < 0 || id >= ETP_MAX_FINGERS)
return;
etd->mt[id].x = ((packet[1] & 0x0f) << 8) | packet[2];
etd->mt[id].y = etd->y_max - (((packet[4] & 0x0f) << 8) | packet[5]);
pres = (packet[1] & 0xf0) | ((packet[4] & 0xf0) >> 4);
traces = (packet[0] & 0xf0) >> 4;
input_mt_slot(dev, id);
input_mt_report_slot_state(dev, MT_TOOL_FINGER, true);
input_report_abs(dev, ABS_MT_POSITION_X, etd->mt[id].x);
input_report_abs(dev, ABS_MT_POSITION_Y, etd->mt[id].y);
input_report_abs(dev, ABS_MT_PRESSURE, pres);
input_report_abs(dev, ABS_MT_TOUCH_MAJOR, traces * etd->width);
/* report this for backwards compatibility */
input_report_abs(dev, ABS_TOOL_WIDTH, traces);
elantech_input_sync_v4(psmouse);
}
static void process_packet_motion_v4(struct psmouse *psmouse)
{
struct input_dev *dev = psmouse->dev;
struct elantech_data *etd = psmouse->private;
unsigned char *packet = psmouse->packet;
int weight, delta_x1 = 0, delta_y1 = 0, delta_x2 = 0, delta_y2 = 0;
int id, sid;
id = ((packet[0] & 0xe0) >> 5) - 1;
if (id < 0 || id >= ETP_MAX_FINGERS)
return;
sid = ((packet[3] & 0xe0) >> 5) - 1;
weight = (packet[0] & 0x10) ? ETP_WEIGHT_VALUE : 1;
/*
* Motion packets give us the delta of x, y values of specific fingers,
* but in two's complement. Let the compiler do the conversion for us.
* Also _enlarge_ the numbers to int, in case of overflow.
*/
delta_x1 = (signed char)packet[1];
delta_y1 = (signed char)packet[2];
delta_x2 = (signed char)packet[4];
delta_y2 = (signed char)packet[5];
etd->mt[id].x += delta_x1 * weight;
etd->mt[id].y -= delta_y1 * weight;
input_mt_slot(dev, id);
input_report_abs(dev, ABS_MT_POSITION_X, etd->mt[id].x);
input_report_abs(dev, ABS_MT_POSITION_Y, etd->mt[id].y);
if (sid >= 0 && sid < ETP_MAX_FINGERS) {
etd->mt[sid].x += delta_x2 * weight;
etd->mt[sid].y -= delta_y2 * weight;
input_mt_slot(dev, sid);
input_report_abs(dev, ABS_MT_POSITION_X, etd->mt[sid].x);
input_report_abs(dev, ABS_MT_POSITION_Y, etd->mt[sid].y);
}
elantech_input_sync_v4(psmouse);
}
static void elantech_report_absolute_v4(struct psmouse *psmouse,
int packet_type)
{
switch (packet_type) {
case PACKET_V4_STATUS:
process_packet_status_v4(psmouse);
break;
case PACKET_V4_HEAD:
process_packet_head_v4(psmouse);
break;
case PACKET_V4_MOTION:
process_packet_motion_v4(psmouse);
break;
case PACKET_UNKNOWN:
default:
/* impossible to get here */
break;
}
}
static int elantech_packet_check_v1(struct psmouse *psmouse)
{
struct elantech_data *etd = psmouse->private;
unsigned char *packet = psmouse->packet;
unsigned char p1, p2, p3;
/* Parity bits are placed differently */
if (etd->info.fw_version < 0x020000) {
/* byte 0: D U p1 p2 1 p3 R L */
p1 = (packet[0] & 0x20) >> 5;
p2 = (packet[0] & 0x10) >> 4;
} else {
/* byte 0: n1 n0 p2 p1 1 p3 R L */
p1 = (packet[0] & 0x10) >> 4;
p2 = (packet[0] & 0x20) >> 5;
}
p3 = (packet[0] & 0x04) >> 2;
return etd->parity[packet[1]] == p1 &&
etd->parity[packet[2]] == p2 &&
etd->parity[packet[3]] == p3;
}
static int elantech_debounce_check_v2(struct psmouse *psmouse)
{
/*
* When we encounter packet that matches this exactly, it means the
* hardware is in debounce status. Just ignore the whole packet.
*/
static const u8 debounce_packet[] = {
0x84, 0xff, 0xff, 0x02, 0xff, 0xff
};
unsigned char *packet = psmouse->packet;
return !memcmp(packet, debounce_packet, sizeof(debounce_packet));
}
static int elantech_packet_check_v2(struct psmouse *psmouse)
{
struct elantech_data *etd = psmouse->private;
unsigned char *packet = psmouse->packet;
/*
* V2 hardware has two flavors. Older ones that do not report pressure,
* and newer ones that reports pressure and width. With newer ones, all
* packets (1, 2, 3 finger touch) have the same constant bits. With
* older ones, 1/3 finger touch packets and 2 finger touch packets
* have different constant bits.
* With all three cases, if the constant bits are not exactly what I
* expected, I consider them invalid.
*/
if (etd->info.reports_pressure)
return (packet[0] & 0x0c) == 0x04 &&
(packet[3] & 0x0f) == 0x02;
if ((packet[0] & 0xc0) == 0x80)
return (packet[0] & 0x0c) == 0x0c &&
(packet[3] & 0x0e) == 0x08;
return (packet[0] & 0x3c) == 0x3c &&
(packet[1] & 0xf0) == 0x00 &&
(packet[3] & 0x3e) == 0x38 &&
(packet[4] & 0xf0) == 0x00;
}
/*
* We check the constant bits to determine what packet type we get,
* so packet checking is mandatory for v3 and later hardware.
*/
static int elantech_packet_check_v3(struct psmouse *psmouse)
{
struct elantech_data *etd = psmouse->private;
static const u8 debounce_packet[] = {
0xc4, 0xff, 0xff, 0x02, 0xff, 0xff
};
unsigned char *packet = psmouse->packet;
/*
* check debounce first, it has the same signature in byte 0
* and byte 3 as PACKET_V3_HEAD.
*/
if (!memcmp(packet, debounce_packet, sizeof(debounce_packet)))
return PACKET_DEBOUNCE;
/*
* If the hardware flag 'crc_enabled' is set the packets have
* different signatures.
*/
if (etd->info.crc_enabled) {
if ((packet[3] & 0x09) == 0x08)
return PACKET_V3_HEAD;
if ((packet[3] & 0x09) == 0x09)
return PACKET_V3_TAIL;
} else {
if ((packet[0] & 0x0c) == 0x04 && (packet[3] & 0xcf) == 0x02)
return PACKET_V3_HEAD;
if ((packet[0] & 0x0c) == 0x0c && (packet[3] & 0xce) == 0x0c)
return PACKET_V3_TAIL;
if ((packet[3] & 0x0f) == 0x06)
return PACKET_TRACKPOINT;
}
return PACKET_UNKNOWN;
}
static int elantech_packet_check_v4(struct psmouse *psmouse)
{
struct elantech_data *etd = psmouse->private;
unsigned char *packet = psmouse->packet;
unsigned char packet_type = packet[3] & 0x03;
unsigned int ic_version;
bool sanity_check;
if (etd->tp_dev && (packet[3] & 0x0f) == 0x06)
return PACKET_TRACKPOINT;
/* This represents the version of IC body. */
ic_version = (etd->info.fw_version & 0x0f0000) >> 16;
/*
* Sanity check based on the constant bits of a packet.
* The constant bits change depending on the value of
* the hardware flag 'crc_enabled' and the version of
* the IC body, but are the same for every packet,
* regardless of the type.
*/
if (etd->info.crc_enabled)
sanity_check = ((packet[3] & 0x08) == 0x00);
else if (ic_version == 7 && etd->info.samples[1] == 0x2A)
sanity_check = ((packet[3] & 0x1c) == 0x10);
else
sanity_check = ((packet[0] & 0x08) == 0x00 &&
(packet[3] & 0x1c) == 0x10);
if (!sanity_check)
return PACKET_UNKNOWN;
switch (packet_type) {
case 0:
return PACKET_V4_STATUS;
case 1:
return PACKET_V4_HEAD;
case 2:
return PACKET_V4_MOTION;
}
return PACKET_UNKNOWN;
}
/*
* Process byte stream from mouse and handle complete packets
*/
static psmouse_ret_t elantech_process_byte(struct psmouse *psmouse)
{
struct elantech_data *etd = psmouse->private;
int packet_type;
if (psmouse->pktcnt < psmouse->pktsize)
return PSMOUSE_GOOD_DATA;
if (etd->info.debug > 1)
elantech_packet_dump(psmouse);
switch (etd->info.hw_version) {
case 1:
if (etd->info.paritycheck && !elantech_packet_check_v1(psmouse))
return PSMOUSE_BAD_DATA;
elantech_report_absolute_v1(psmouse);
break;
case 2:
/* ignore debounce */
if (elantech_debounce_check_v2(psmouse))
return PSMOUSE_FULL_PACKET;
if (etd->info.paritycheck && !elantech_packet_check_v2(psmouse))
return PSMOUSE_BAD_DATA;
elantech_report_absolute_v2(psmouse);
break;
case 3:
packet_type = elantech_packet_check_v3(psmouse);
switch (packet_type) {
case PACKET_UNKNOWN:
return PSMOUSE_BAD_DATA;
case PACKET_DEBOUNCE:
/* ignore debounce */
break;
case PACKET_TRACKPOINT:
elantech_report_trackpoint(psmouse, packet_type);
break;
default:
elantech_report_absolute_v3(psmouse, packet_type);
break;
}
break;
case 4:
packet_type = elantech_packet_check_v4(psmouse);
switch (packet_type) {
case PACKET_UNKNOWN:
return PSMOUSE_BAD_DATA;
case PACKET_TRACKPOINT:
elantech_report_trackpoint(psmouse, packet_type);
break;
default:
elantech_report_absolute_v4(psmouse, packet_type);
break;
}
break;
}
return PSMOUSE_FULL_PACKET;
}
/*
* This writes the reg_07 value again to the hardware at the end of every
* set_rate call because the register loses its value. reg_07 allows setting
* absolute mode on v4 hardware
*/
static void elantech_set_rate_restore_reg_07(struct psmouse *psmouse,
unsigned int rate)
{
struct elantech_data *etd = psmouse->private;
etd->original_set_rate(psmouse, rate);
if (elantech_write_reg(psmouse, 0x07, etd->reg_07))
psmouse_err(psmouse, "restoring reg_07 failed\n");
}
/*
* Put the touchpad into absolute mode
*/
static int elantech_set_absolute_mode(struct psmouse *psmouse)
{
struct elantech_data *etd = psmouse->private;
unsigned char val;
int tries = ETP_READ_BACK_TRIES;
int rc = 0;
switch (etd->info.hw_version) {
case 1:
etd->reg_10 = 0x16;
etd->reg_11 = 0x8f;
if (elantech_write_reg(psmouse, 0x10, etd->reg_10) ||
elantech_write_reg(psmouse, 0x11, etd->reg_11)) {
rc = -1;
}
break;
case 2:
/* Windows driver values */
etd->reg_10 = 0x54;
etd->reg_11 = 0x88; /* 0x8a */
etd->reg_21 = 0x60; /* 0x00 */
if (elantech_write_reg(psmouse, 0x10, etd->reg_10) ||
elantech_write_reg(psmouse, 0x11, etd->reg_11) ||
elantech_write_reg(psmouse, 0x21, etd->reg_21)) {
rc = -1;
}
break;
case 3:
if (etd->info.set_hw_resolution)
etd->reg_10 = 0x0b;
else
etd->reg_10 = 0x01;
if (elantech_write_reg(psmouse, 0x10, etd->reg_10))
rc = -1;
break;
case 4:
etd->reg_07 = 0x01;
if (elantech_write_reg(psmouse, 0x07, etd->reg_07))
rc = -1;
goto skip_readback_reg_10; /* v4 has no reg 0x10 to read */
}
if (rc == 0) {
/*
* Read back reg 0x10. For hardware version 1 we must make
* sure the absolute mode bit is set. For hardware version 2
* the touchpad is probably initializing and not ready until
* we read back the value we just wrote.
*/
do {
rc = elantech_read_reg(psmouse, 0x10, &val);
if (rc == 0)
break;
tries--;
elantech_debug("retrying read (%d).\n", tries);
msleep(ETP_READ_BACK_DELAY);
} while (tries > 0);
if (rc) {
psmouse_err(psmouse,
"failed to read back register 0x10.\n");
} else if (etd->info.hw_version == 1 &&
!(val & ETP_R10_ABSOLUTE_MODE)) {
psmouse_err(psmouse,
"touchpad refuses to switch to absolute mode.\n");
rc = -1;
}
}
skip_readback_reg_10:
if (rc)
psmouse_err(psmouse, "failed to initialise registers.\n");
return rc;
}
/*
* (value from firmware) * 10 + 790 = dpi
* we also have to convert dpi to dots/mm (*10/254 to avoid floating point)
*/
static unsigned int elantech_convert_res(unsigned int val)
{
return (val * 10 + 790) * 10 / 254;
}
static int elantech_get_resolution_v4(struct psmouse *psmouse,
unsigned int *x_res,
unsigned int *y_res,
unsigned int *bus)
{
unsigned char param[3];
if (elantech_send_cmd(psmouse, ETP_RESOLUTION_QUERY, param))
return -1;
*x_res = elantech_convert_res(param[1] & 0x0f);
*y_res = elantech_convert_res((param[1] & 0xf0) >> 4);
*bus = param[2];
return 0;
}
static void elantech_set_buttonpad_prop(struct psmouse *psmouse)
{
struct input_dev *dev = psmouse->dev;
struct elantech_data *etd = psmouse->private;
if (elantech_is_buttonpad(&etd->info)) {
__set_bit(INPUT_PROP_BUTTONPAD, dev->propbit);
__clear_bit(BTN_RIGHT, dev->keybit);
}
}
/*
* Some hw_version 4 models do have a middle button
*/
static const struct dmi_system_id elantech_dmi_has_middle_button[] = {
#if defined(CONFIG_DMI) && defined(CONFIG_X86)
{
/* Fujitsu H730 has a middle button */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
DMI_MATCH(DMI_PRODUCT_NAME, "CELSIUS H730"),
},
},
{
/* Fujitsu H760 also has a middle button */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
DMI_MATCH(DMI_PRODUCT_NAME, "CELSIUS H760"),
},
},
{
/* Fujitsu H780 also has a middle button */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
DMI_MATCH(DMI_PRODUCT_NAME, "CELSIUS H780"),
},
},
#endif
{ }
};
/*
* Set the appropriate event bits for the input subsystem
*/
static int elantech_set_input_params(struct psmouse *psmouse)
{
struct input_dev *dev = psmouse->dev;
struct elantech_data *etd = psmouse->private;
struct elantech_device_info *info = &etd->info;
unsigned int x_min = info->x_min, y_min = info->y_min,
x_max = info->x_max, y_max = info->y_max,
width = info->width;
__set_bit(INPUT_PROP_POINTER, dev->propbit);
__set_bit(EV_KEY, dev->evbit);
__set_bit(EV_ABS, dev->evbit);
__clear_bit(EV_REL, dev->evbit);
__set_bit(BTN_LEFT, dev->keybit);
if (info->has_middle_button)
__set_bit(BTN_MIDDLE, dev->keybit);
__set_bit(BTN_RIGHT, dev->keybit);
__set_bit(BTN_TOUCH, dev->keybit);
__set_bit(BTN_TOOL_FINGER, dev->keybit);
__set_bit(BTN_TOOL_DOUBLETAP, dev->keybit);
__set_bit(BTN_TOOL_TRIPLETAP, dev->keybit);
switch (info->hw_version) {
case 1:
/* Rocker button */
if (info->fw_version < 0x020000 &&
(info->capabilities[0] & ETP_CAP_HAS_ROCKER)) {
__set_bit(BTN_FORWARD, dev->keybit);
__set_bit(BTN_BACK, dev->keybit);
}
input_set_abs_params(dev, ABS_X, x_min, x_max, 0, 0);
input_set_abs_params(dev, ABS_Y, y_min, y_max, 0, 0);
break;
case 2:
__set_bit(BTN_TOOL_QUADTAP, dev->keybit);
__set_bit(INPUT_PROP_SEMI_MT, dev->propbit);
fallthrough;
case 3:
if (info->hw_version == 3)
elantech_set_buttonpad_prop(psmouse);
input_set_abs_params(dev, ABS_X, x_min, x_max, 0, 0);
input_set_abs_params(dev, ABS_Y, y_min, y_max, 0, 0);
if (info->reports_pressure) {
input_set_abs_params(dev, ABS_PRESSURE, ETP_PMIN_V2,
ETP_PMAX_V2, 0, 0);
input_set_abs_params(dev, ABS_TOOL_WIDTH, ETP_WMIN_V2,
ETP_WMAX_V2, 0, 0);
}
input_mt_init_slots(dev, 2, INPUT_MT_SEMI_MT);
input_set_abs_params(dev, ABS_MT_POSITION_X, x_min, x_max, 0, 0);
input_set_abs_params(dev, ABS_MT_POSITION_Y, y_min, y_max, 0, 0);
break;
case 4:
elantech_set_buttonpad_prop(psmouse);
__set_bit(BTN_TOOL_QUADTAP, dev->keybit);
/* For X to recognize me as touchpad. */
input_set_abs_params(dev, ABS_X, x_min, x_max, 0, 0);
input_set_abs_params(dev, ABS_Y, y_min, y_max, 0, 0);
/*
* range of pressure and width is the same as v2,
* report ABS_PRESSURE, ABS_TOOL_WIDTH for compatibility.
*/
input_set_abs_params(dev, ABS_PRESSURE, ETP_PMIN_V2,
ETP_PMAX_V2, 0, 0);
input_set_abs_params(dev, ABS_TOOL_WIDTH, ETP_WMIN_V2,
ETP_WMAX_V2, 0, 0);
/* Multitouch capable pad, up to 5 fingers. */
input_mt_init_slots(dev, ETP_MAX_FINGERS, 0);
input_set_abs_params(dev, ABS_MT_POSITION_X, x_min, x_max, 0, 0);
input_set_abs_params(dev, ABS_MT_POSITION_Y, y_min, y_max, 0, 0);
input_set_abs_params(dev, ABS_MT_PRESSURE, ETP_PMIN_V2,
ETP_PMAX_V2, 0, 0);
/*
* The firmware reports how many trace lines the finger spans,
* convert to surface unit as Protocol-B requires.
*/
input_set_abs_params(dev, ABS_MT_TOUCH_MAJOR, 0,
ETP_WMAX_V2 * width, 0, 0);
break;
}
input_abs_set_res(dev, ABS_X, info->x_res);
input_abs_set_res(dev, ABS_Y, info->y_res);
if (info->hw_version > 1) {
input_abs_set_res(dev, ABS_MT_POSITION_X, info->x_res);
input_abs_set_res(dev, ABS_MT_POSITION_Y, info->y_res);
}
etd->y_max = y_max;
etd->width = width;
return 0;
}
struct elantech_attr_data {
size_t field_offset;
unsigned char reg;
};
/*
* Display a register value by reading a sysfs entry
*/
static ssize_t elantech_show_int_attr(struct psmouse *psmouse, void *data,
char *buf)
{
struct elantech_data *etd = psmouse->private;
struct elantech_attr_data *attr = data;
unsigned char *reg = (unsigned char *) etd + attr->field_offset;
int rc = 0;
if (attr->reg)
rc = elantech_read_reg(psmouse, attr->reg, reg);
return sprintf(buf, "0x%02x\n", (attr->reg && rc) ? -1 : *reg);
}
/*
* Write a register value by writing a sysfs entry
*/
static ssize_t elantech_set_int_attr(struct psmouse *psmouse,
void *data, const char *buf, size_t count)
{
struct elantech_data *etd = psmouse->private;
struct elantech_attr_data *attr = data;
unsigned char *reg = (unsigned char *) etd + attr->field_offset;
unsigned char value;
int err;
err = kstrtou8(buf, 16, &value);
if (err)
return err;
/* Do we need to preserve some bits for version 2 hardware too? */
if (etd->info.hw_version == 1) {
if (attr->reg == 0x10)
/* Force absolute mode always on */
value |= ETP_R10_ABSOLUTE_MODE;
else if (attr->reg == 0x11)
/* Force 4 byte mode always on */
value |= ETP_R11_4_BYTE_MODE;
}
if (!attr->reg || elantech_write_reg(psmouse, attr->reg, value) == 0)
*reg = value;
return count;
}
#define ELANTECH_INT_ATTR(_name, _register) \
static struct elantech_attr_data elantech_attr_##_name = { \
.field_offset = offsetof(struct elantech_data, _name), \
.reg = _register, \
}; \
PSMOUSE_DEFINE_ATTR(_name, 0644, \
&elantech_attr_##_name, \
elantech_show_int_attr, \
elantech_set_int_attr)
#define ELANTECH_INFO_ATTR(_name) \
static struct elantech_attr_data elantech_attr_##_name = { \
.field_offset = offsetof(struct elantech_data, info) + \
offsetof(struct elantech_device_info, _name), \
.reg = 0, \
}; \
PSMOUSE_DEFINE_ATTR(_name, 0644, \
&elantech_attr_##_name, \
elantech_show_int_attr, \
elantech_set_int_attr)
ELANTECH_INT_ATTR(reg_07, 0x07);
ELANTECH_INT_ATTR(reg_10, 0x10);
ELANTECH_INT_ATTR(reg_11, 0x11);
ELANTECH_INT_ATTR(reg_20, 0x20);
ELANTECH_INT_ATTR(reg_21, 0x21);
ELANTECH_INT_ATTR(reg_22, 0x22);
ELANTECH_INT_ATTR(reg_23, 0x23);
ELANTECH_INT_ATTR(reg_24, 0x24);
ELANTECH_INT_ATTR(reg_25, 0x25);
ELANTECH_INT_ATTR(reg_26, 0x26);
ELANTECH_INFO_ATTR(debug);
ELANTECH_INFO_ATTR(paritycheck);
ELANTECH_INFO_ATTR(crc_enabled);
static struct attribute *elantech_attrs[] = {
&psmouse_attr_reg_07.dattr.attr,
&psmouse_attr_reg_10.dattr.attr,
&psmouse_attr_reg_11.dattr.attr,
&psmouse_attr_reg_20.dattr.attr,
&psmouse_attr_reg_21.dattr.attr,
&psmouse_attr_reg_22.dattr.attr,
&psmouse_attr_reg_23.dattr.attr,
&psmouse_attr_reg_24.dattr.attr,
&psmouse_attr_reg_25.dattr.attr,
&psmouse_attr_reg_26.dattr.attr,
&psmouse_attr_debug.dattr.attr,
&psmouse_attr_paritycheck.dattr.attr,
&psmouse_attr_crc_enabled.dattr.attr,
NULL
};
static const struct attribute_group elantech_attr_group = {
.attrs = elantech_attrs,
};
static bool elantech_is_signature_valid(const unsigned char *param)
{
static const unsigned char rates[] = { 200, 100, 80, 60, 40, 20, 10 };
int i;
if (param[0] == 0)
return false;
if (param[1] == 0)
return true;
/*
* Some hw_version >= 4 models have a revision higher then 20. Meaning
* that param[2] may be 10 or 20, skip the rates check for these.
*/
if ((param[0] & 0x0f) >= 0x06 && (param[1] & 0xaf) == 0x0f &&
param[2] < 40)
return true;
for (i = 0; i < ARRAY_SIZE(rates); i++)
if (param[2] == rates[i])
return false;
return true;
}
/*
* Use magic knock to detect Elantech touchpad
*/
int elantech_detect(struct psmouse *psmouse, bool set_properties)
{
struct ps2dev *ps2dev = &psmouse->ps2dev;
unsigned char param[3];
ps2_command(ps2dev, NULL, PSMOUSE_CMD_RESET_DIS);
if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) ||
ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) ||
ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) ||
ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) ||
ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO)) {
psmouse_dbg(psmouse, "sending Elantech magic knock failed.\n");
return -1;
}
/*
* Report this in case there are Elantech models that use a different
* set of magic numbers
*/
if (param[0] != 0x3c || param[1] != 0x03 ||
(param[2] != 0xc8 && param[2] != 0x00)) {
psmouse_dbg(psmouse,
"unexpected magic knock result 0x%02x, 0x%02x, 0x%02x.\n",
param[0], param[1], param[2]);
return -1;
}
/*
* Query touchpad's firmware version and see if it reports known
* value to avoid mis-detection. Logitech mice are known to respond
* to Elantech magic knock and there might be more.
*/
if (synaptics_send_cmd(psmouse, ETP_FW_VERSION_QUERY, param)) {
psmouse_dbg(psmouse, "failed to query firmware version.\n");
return -1;
}
psmouse_dbg(psmouse,
"Elantech version query result 0x%02x, 0x%02x, 0x%02x.\n",
param[0], param[1], param[2]);
if (!elantech_is_signature_valid(param)) {
psmouse_dbg(psmouse,
"Probably not a real Elantech touchpad. Aborting.\n");
return -1;
}
if (set_properties) {
psmouse->vendor = "Elantech";
psmouse->name = "Touchpad";
}
return 0;
}
/*
* Clean up sysfs entries when disconnecting
*/
static void elantech_disconnect(struct psmouse *psmouse)
{
struct elantech_data *etd = psmouse->private;
/*
* We might have left a breadcrumb when trying to
* set up SMbus companion.
*/
psmouse_smbus_cleanup(psmouse);
if (etd->tp_dev)
input_unregister_device(etd->tp_dev);
sysfs_remove_group(&psmouse->ps2dev.serio->dev.kobj,
&elantech_attr_group);
kfree(psmouse->private);
psmouse->private = NULL;
}
/*
* Some hw_version 4 models fail to properly activate absolute mode on
* resume without going through disable/enable cycle.
*/
static const struct dmi_system_id elantech_needs_reenable[] = {
#if defined(CONFIG_DMI) && defined(CONFIG_X86)
{
/* Lenovo N24 */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
DMI_MATCH(DMI_PRODUCT_NAME, "81AF"),
},
},
#endif
{ }
};
/*
* Put the touchpad back into absolute mode when reconnecting
*/
static int elantech_reconnect(struct psmouse *psmouse)
{
int err;
psmouse_reset(psmouse);
if (elantech_detect(psmouse, 0))
return -1;
if (dmi_check_system(elantech_needs_reenable)) {
err = ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_DISABLE);
if (err)
psmouse_warn(psmouse, "failed to deactivate mouse on %s: %d\n",
psmouse->ps2dev.serio->phys, err);
err = ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_ENABLE);
if (err)
psmouse_warn(psmouse, "failed to reactivate mouse on %s: %d\n",
psmouse->ps2dev.serio->phys, err);
}
if (elantech_set_absolute_mode(psmouse)) {
psmouse_err(psmouse,
"failed to put touchpad back into absolute mode.\n");
return -1;
}
return 0;
}
/*
* Some hw_version 4 models do not work with crc_disabled
*/
static const struct dmi_system_id elantech_dmi_force_crc_enabled[] = {
#if defined(CONFIG_DMI) && defined(CONFIG_X86)
{
/* Fujitsu H730 does not work with crc_enabled == 0 */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
DMI_MATCH(DMI_PRODUCT_NAME, "CELSIUS H730"),
},
},
{
/* Fujitsu H760 does not work with crc_enabled == 0 */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
DMI_MATCH(DMI_PRODUCT_NAME, "CELSIUS H760"),
},
},
{
/* Fujitsu LIFEBOOK E544 does not work with crc_enabled == 0 */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK E544"),
},
},
{
/* Fujitsu LIFEBOOK E546 does not work with crc_enabled == 0 */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK E546"),
},
},
{
/* Fujitsu LIFEBOOK E547 does not work with crc_enabled == 0 */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK E547"),
},
},
{
/* Fujitsu LIFEBOOK E554 does not work with crc_enabled == 0 */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK E554"),
},
},
{
/* Fujitsu LIFEBOOK E556 does not work with crc_enabled == 0 */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK E556"),
},
},
{
/* Fujitsu LIFEBOOK E557 does not work with crc_enabled == 0 */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK E557"),
},
},
{
/* Fujitsu LIFEBOOK U745 does not work with crc_enabled == 0 */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK U745"),
},
},
#endif
{ }
};
/*
* Some hw_version 3 models go into error state when we try to set
* bit 3 and/or bit 1 of r10.
*/
static const struct dmi_system_id no_hw_res_dmi_table[] = {
#if defined(CONFIG_DMI) && defined(CONFIG_X86)
{
/* Gigabyte U2442 */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "GIGABYTE"),
DMI_MATCH(DMI_PRODUCT_NAME, "U2442"),
},
},
#endif
{ }
};
/*
* Change Report id 0x5E to 0x5F.
*/
static int elantech_change_report_id(struct psmouse *psmouse)
{
/*
* NOTE: the code is expecting to receive param[] as an array of 3
* items (see __ps2_command()), even if in this case only 2 are
* actually needed. Make sure the array size is 3 to avoid potential
* stack out-of-bound accesses.
*/
unsigned char param[3] = { 0x10, 0x03 };
if (elantech_write_reg_params(psmouse, 0x7, param) ||
elantech_read_reg_params(psmouse, 0x7, param) ||
param[0] != 0x10 || param[1] != 0x03) {
psmouse_err(psmouse, "Unable to change report ID to 0x5f.\n");
return -EIO;
}
return 0;
}
/*
* determine hardware version and set some properties according to it.
*/
static int elantech_set_properties(struct elantech_device_info *info)
{
/* This represents the version of IC body. */
info->ic_version = (info->fw_version & 0x0f0000) >> 16;
/* Early version of Elan touchpads doesn't obey the rule. */
if (info->fw_version < 0x020030 || info->fw_version == 0x020600)
info->hw_version = 1;
else {
switch (info->ic_version) {
case 2:
case 4:
info->hw_version = 2;
break;
case 5:
info->hw_version = 3;
break;
case 6 ... 15:
info->hw_version = 4;
break;
default:
return -1;
}
}
/* Get information pattern for hw_version 4 */
info->pattern = 0x00;
if (info->ic_version == 0x0f && (info->fw_version & 0xff) <= 0x02)
info->pattern = info->fw_version & 0xff;
/* decide which send_cmd we're gonna use early */
info->send_cmd = info->hw_version >= 3 ? elantech_send_cmd :
synaptics_send_cmd;
/* Turn on packet checking by default */
info->paritycheck = 1;
/*
* This firmware suffers from misreporting coordinates when
* a touch action starts causing the mouse cursor or scrolled page
* to jump. Enable a workaround.
*/
info->jumpy_cursor =
(info->fw_version == 0x020022 || info->fw_version == 0x020600);
if (info->hw_version > 1) {
/* For now show extra debug information */
info->debug = 1;
if (info->fw_version >= 0x020800)
info->reports_pressure = true;
}
/*
* The signatures of v3 and v4 packets change depending on the
* value of this hardware flag.
*/
info->crc_enabled = (info->fw_version & 0x4000) == 0x4000 ||
dmi_check_system(elantech_dmi_force_crc_enabled);
/* Enable real hardware resolution on hw_version 3 ? */
info->set_hw_resolution = !dmi_check_system(no_hw_res_dmi_table);
return 0;
}
static int elantech_query_info(struct psmouse *psmouse,
struct elantech_device_info *info)
{
unsigned char param[3];
unsigned char traces;
unsigned char ic_body[3];
memset(info, 0, sizeof(*info));
/*
* Do the version query again so we can store the result
*/
if (synaptics_send_cmd(psmouse, ETP_FW_VERSION_QUERY, param)) {
psmouse_err(psmouse, "failed to query firmware version.\n");
return -EINVAL;
}
info->fw_version = (param[0] << 16) | (param[1] << 8) | param[2];
if (elantech_set_properties(info)) {
psmouse_err(psmouse, "unknown hardware version, aborting...\n");
return -EINVAL;
}
psmouse_info(psmouse,
"assuming hardware version %d (with firmware version 0x%02x%02x%02x)\n",
info->hw_version, param[0], param[1], param[2]);
if (info->send_cmd(psmouse, ETP_CAPABILITIES_QUERY,
info->capabilities)) {
psmouse_err(psmouse, "failed to query capabilities.\n");
return -EINVAL;
}
psmouse_info(psmouse,
"Synaptics capabilities query result 0x%02x, 0x%02x, 0x%02x.\n",
info->capabilities[0], info->capabilities[1],
info->capabilities[2]);
if (info->hw_version != 1) {
if (info->send_cmd(psmouse, ETP_SAMPLE_QUERY, info->samples)) {
psmouse_err(psmouse, "failed to query sample data\n");
return -EINVAL;
}
psmouse_info(psmouse,
"Elan sample query result %02x, %02x, %02x\n",
info->samples[0],
info->samples[1],
info->samples[2]);
}
if (info->pattern > 0x00 && info->ic_version == 0xf) {
if (info->send_cmd(psmouse, ETP_ICBODY_QUERY, ic_body)) {
psmouse_err(psmouse, "failed to query ic body\n");
return -EINVAL;
}
info->ic_version = be16_to_cpup((__be16 *)ic_body);
psmouse_info(psmouse,
"Elan ic body: %#04x, current fw version: %#02x\n",
info->ic_version, ic_body[2]);
}
info->product_id = be16_to_cpup((__be16 *)info->samples);
if (info->pattern == 0x00)
info->product_id &= 0xff;
if (info->samples[1] == 0x74 && info->hw_version == 0x03) {
/*
* This module has a bug which makes absolute mode
* unusable, so let's abort so we'll be using standard
* PS/2 protocol.
*/
psmouse_info(psmouse,
"absolute mode broken, forcing standard PS/2 protocol\n");
return -ENODEV;
}
/* The MSB indicates the presence of the trackpoint */
info->has_trackpoint = (info->capabilities[0] & 0x80) == 0x80;
if (info->has_trackpoint && info->ic_version == 0x0011 &&
(info->product_id == 0x08 || info->product_id == 0x09 ||
info->product_id == 0x0d || info->product_id == 0x0e)) {
/*
* This module has a bug which makes trackpoint in SMBus
* mode return invalid data unless trackpoint is switched
* from using 0x5e reports to 0x5f. If we are not able to
* make the switch, let's abort initialization so we'll be
* using standard PS/2 protocol.
*/
if (elantech_change_report_id(psmouse)) {
psmouse_info(psmouse,
"Trackpoint report is broken, forcing standard PS/2 protocol\n");
return -ENODEV;
}
}
info->x_res = 31;
info->y_res = 31;
if (info->hw_version == 4) {
if (elantech_get_resolution_v4(psmouse,
&info->x_res,
&info->y_res,
&info->bus)) {
psmouse_warn(psmouse,
"failed to query resolution data.\n");
}
}
/* query range information */
switch (info->hw_version) {
case 1:
info->x_min = ETP_XMIN_V1;
info->y_min = ETP_YMIN_V1;
info->x_max = ETP_XMAX_V1;
info->y_max = ETP_YMAX_V1;
break;
case 2:
if (info->fw_version == 0x020800 ||
info->fw_version == 0x020b00 ||
info->fw_version == 0x020030) {
info->x_min = ETP_XMIN_V2;
info->y_min = ETP_YMIN_V2;
info->x_max = ETP_XMAX_V2;
info->y_max = ETP_YMAX_V2;
} else {
int i;
int fixed_dpi;
i = (info->fw_version > 0x020800 &&
info->fw_version < 0x020900) ? 1 : 2;
if (info->send_cmd(psmouse, ETP_FW_ID_QUERY, param))
return -EINVAL;
fixed_dpi = param[1] & 0x10;
if (((info->fw_version >> 16) == 0x14) && fixed_dpi) {
if (info->send_cmd(psmouse, ETP_SAMPLE_QUERY, param))
return -EINVAL;
info->x_max = (info->capabilities[1] - i) * param[1] / 2;
info->y_max = (info->capabilities[2] - i) * param[2] / 2;
} else if (info->fw_version == 0x040216) {
info->x_max = 819;
info->y_max = 405;
} else if (info->fw_version == 0x040219 || info->fw_version == 0x040215) {
info->x_max = 900;
info->y_max = 500;
} else {
info->x_max = (info->capabilities[1] - i) * 64;
info->y_max = (info->capabilities[2] - i) * 64;
}
}
break;
case 3:
if (info->send_cmd(psmouse, ETP_FW_ID_QUERY, param))
return -EINVAL;
info->x_max = (0x0f & param[0]) << 8 | param[1];
info->y_max = (0xf0 & param[0]) << 4 | param[2];
break;
case 4:
if (info->send_cmd(psmouse, ETP_FW_ID_QUERY, param))
return -EINVAL;
info->x_max = (0x0f & param[0]) << 8 | param[1];
info->y_max = (0xf0 & param[0]) << 4 | param[2];
traces = info->capabilities[1];
if ((traces < 2) || (traces > info->x_max))
return -EINVAL;
info->width = info->x_max / (traces - 1);
/* column number of traces */
info->x_traces = traces;
/* row number of traces */
traces = info->capabilities[2];
if ((traces >= 2) && (traces <= info->y_max))
info->y_traces = traces;
break;
}
/* check for the middle button: DMI matching or new v4 firmwares */
info->has_middle_button = dmi_check_system(elantech_dmi_has_middle_button) ||
(ETP_NEW_IC_SMBUS_HOST_NOTIFY(info->fw_version) &&
!elantech_is_buttonpad(info));
return 0;
}
#if defined(CONFIG_MOUSE_PS2_ELANTECH_SMBUS)
/*
* The newest Elantech device can use a secondary bus (over SMBus) which
* provides a better bandwidth and allow a better control of the touchpads.
* This is used to decide if we need to use this bus or not.
*/
enum {
ELANTECH_SMBUS_NOT_SET = -1,
ELANTECH_SMBUS_OFF,
ELANTECH_SMBUS_ON,
};
static int elantech_smbus = IS_ENABLED(CONFIG_MOUSE_ELAN_I2C_SMBUS) ?
ELANTECH_SMBUS_NOT_SET : ELANTECH_SMBUS_OFF;
module_param_named(elantech_smbus, elantech_smbus, int, 0644);
MODULE_PARM_DESC(elantech_smbus, "Use a secondary bus for the Elantech device.");
static const char * const i2c_blacklist_pnp_ids[] = {
/*
* These are known to not be working properly as bits are missing
* in elan_i2c.
*/
NULL
};
static int elantech_create_smbus(struct psmouse *psmouse,
struct elantech_device_info *info,
bool leave_breadcrumbs)
{
struct property_entry i2c_props[11] = {};
struct i2c_board_info smbus_board = {
I2C_BOARD_INFO("elan_i2c", 0x15),
.flags = I2C_CLIENT_HOST_NOTIFY,
};
unsigned int idx = 0;
i2c_props[idx++] = PROPERTY_ENTRY_U32("touchscreen-size-x",
info->x_max + 1);
i2c_props[idx++] = PROPERTY_ENTRY_U32("touchscreen-size-y",
info->y_max + 1);
i2c_props[idx++] = PROPERTY_ENTRY_U32("touchscreen-min-x",
info->x_min);
i2c_props[idx++] = PROPERTY_ENTRY_U32("touchscreen-min-y",
info->y_min);
if (info->x_res)
i2c_props[idx++] = PROPERTY_ENTRY_U32("touchscreen-x-mm",
(info->x_max + 1) / info->x_res);
if (info->y_res)
i2c_props[idx++] = PROPERTY_ENTRY_U32("touchscreen-y-mm",
(info->y_max + 1) / info->y_res);
if (info->has_trackpoint)
i2c_props[idx++] = PROPERTY_ENTRY_BOOL("elan,trackpoint");
if (info->has_middle_button)
i2c_props[idx++] = PROPERTY_ENTRY_BOOL("elan,middle-button");
if (info->x_traces)
i2c_props[idx++] = PROPERTY_ENTRY_U32("elan,x_traces",
info->x_traces);
if (info->y_traces)
i2c_props[idx++] = PROPERTY_ENTRY_U32("elan,y_traces",
info->y_traces);
if (elantech_is_buttonpad(info))
i2c_props[idx++] = PROPERTY_ENTRY_BOOL("elan,clickpad");
smbus_board.fwnode = fwnode_create_software_node(i2c_props, NULL);
if (IS_ERR(smbus_board.fwnode))
return PTR_ERR(smbus_board.fwnode);
return psmouse_smbus_init(psmouse, &smbus_board, NULL, 0, false,
leave_breadcrumbs);
}
/*
* elantech_setup_smbus - called once the PS/2 devices are enumerated
* and decides to instantiate a SMBus InterTouch device.
*/
static int elantech_setup_smbus(struct psmouse *psmouse,
struct elantech_device_info *info,
bool leave_breadcrumbs)
{
int error;
if (elantech_smbus == ELANTECH_SMBUS_OFF)
return -ENXIO;
if (elantech_smbus == ELANTECH_SMBUS_NOT_SET) {
/*
* New ICs are enabled by default, unless mentioned in
* i2c_blacklist_pnp_ids.
* Old ICs are up to the user to decide.
*/
if (!ETP_NEW_IC_SMBUS_HOST_NOTIFY(info->fw_version) ||
psmouse_matches_pnp_id(psmouse, i2c_blacklist_pnp_ids))
return -ENXIO;
}
psmouse_info(psmouse, "Trying to set up SMBus access\n");
error = elantech_create_smbus(psmouse, info, leave_breadcrumbs);
if (error) {
if (error == -EAGAIN)
psmouse_info(psmouse, "SMbus companion is not ready yet\n");
else
psmouse_err(psmouse, "unable to create intertouch device\n");
return error;
}
return 0;
}
static bool elantech_use_host_notify(struct psmouse *psmouse,
struct elantech_device_info *info)
{
if (ETP_NEW_IC_SMBUS_HOST_NOTIFY(info->fw_version))
return true;
switch (info->bus) {
case ETP_BUS_PS2_ONLY:
/* expected case */
break;
case ETP_BUS_SMB_ALERT_ONLY:
case ETP_BUS_PS2_SMB_ALERT:
psmouse_dbg(psmouse, "Ignoring SMBus provider through alert protocol.\n");
break;
case ETP_BUS_SMB_HST_NTFY_ONLY:
case ETP_BUS_PS2_SMB_HST_NTFY:
return true;
default:
psmouse_dbg(psmouse,
"Ignoring SMBus bus provider %d.\n",
info->bus);
}
return false;
}
int elantech_init_smbus(struct psmouse *psmouse)
{
struct elantech_device_info info;
int error;
psmouse_reset(psmouse);
error = elantech_query_info(psmouse, &info);
if (error)
goto init_fail;
if (info.hw_version < 4) {
error = -ENXIO;
goto init_fail;
}
return elantech_create_smbus(psmouse, &info, false);
init_fail:
psmouse_reset(psmouse);
return error;
}
#endif /* CONFIG_MOUSE_PS2_ELANTECH_SMBUS */
/*
* Initialize the touchpad and create sysfs entries
*/
static int elantech_setup_ps2(struct psmouse *psmouse,
struct elantech_device_info *info)
{
struct elantech_data *etd;
int i;
int error = -EINVAL;
struct input_dev *tp_dev;
psmouse->private = etd = kzalloc(sizeof(*etd), GFP_KERNEL);
if (!etd)
return -ENOMEM;
etd->info = *info;
etd->parity[0] = 1;
for (i = 1; i < 256; i++)
etd->parity[i] = etd->parity[i & (i - 1)] ^ 1;
if (elantech_set_absolute_mode(psmouse)) {
psmouse_err(psmouse,
"failed to put touchpad into absolute mode.\n");
goto init_fail;
}
if (info->fw_version == 0x381f17) {
etd->original_set_rate = psmouse->set_rate;
psmouse->set_rate = elantech_set_rate_restore_reg_07;
}
if (elantech_set_input_params(psmouse)) {
psmouse_err(psmouse, "failed to query touchpad range.\n");
goto init_fail;
}
error = sysfs_create_group(&psmouse->ps2dev.serio->dev.kobj,
&elantech_attr_group);
if (error) {
psmouse_err(psmouse,
"failed to create sysfs attributes, error: %d.\n",
error);
goto init_fail;
}
if (info->has_trackpoint) {
tp_dev = input_allocate_device();
if (!tp_dev) {
error = -ENOMEM;
goto init_fail_tp_alloc;
}
etd->tp_dev = tp_dev;
snprintf(etd->tp_phys, sizeof(etd->tp_phys), "%s/input1",
psmouse->ps2dev.serio->phys);
tp_dev->phys = etd->tp_phys;
tp_dev->name = "ETPS/2 Elantech TrackPoint";
tp_dev->id.bustype = BUS_I8042;
tp_dev->id.vendor = 0x0002;
tp_dev->id.product = PSMOUSE_ELANTECH;
tp_dev->id.version = 0x0000;
tp_dev->dev.parent = &psmouse->ps2dev.serio->dev;
tp_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REL);
tp_dev->relbit[BIT_WORD(REL_X)] =
BIT_MASK(REL_X) | BIT_MASK(REL_Y);
tp_dev->keybit[BIT_WORD(BTN_LEFT)] =
BIT_MASK(BTN_LEFT) | BIT_MASK(BTN_MIDDLE) |
BIT_MASK(BTN_RIGHT);
__set_bit(INPUT_PROP_POINTER, tp_dev->propbit);
__set_bit(INPUT_PROP_POINTING_STICK, tp_dev->propbit);
error = input_register_device(etd->tp_dev);
if (error < 0)
goto init_fail_tp_reg;
}
psmouse->protocol_handler = elantech_process_byte;
psmouse->disconnect = elantech_disconnect;
psmouse->reconnect = elantech_reconnect;
psmouse->fast_reconnect = NULL;
psmouse->pktsize = info->hw_version > 1 ? 6 : 4;
return 0;
init_fail_tp_reg:
input_free_device(tp_dev);
init_fail_tp_alloc:
sysfs_remove_group(&psmouse->ps2dev.serio->dev.kobj,
&elantech_attr_group);
init_fail:
kfree(etd);
return error;
}
int elantech_init_ps2(struct psmouse *psmouse)
{
struct elantech_device_info info;
int error;
psmouse_reset(psmouse);
error = elantech_query_info(psmouse, &info);
if (error)
goto init_fail;
error = elantech_setup_ps2(psmouse, &info);
if (error)
goto init_fail;
return 0;
init_fail:
psmouse_reset(psmouse);
return error;
}
int elantech_init(struct psmouse *psmouse)
{
struct elantech_device_info info;
int error;
psmouse_reset(psmouse);
error = elantech_query_info(psmouse, &info);
if (error)
goto init_fail;
#if defined(CONFIG_MOUSE_PS2_ELANTECH_SMBUS)
if (elantech_use_host_notify(psmouse, &info)) {
if (!IS_ENABLED(CONFIG_MOUSE_ELAN_I2C_SMBUS) ||
!IS_ENABLED(CONFIG_MOUSE_PS2_ELANTECH_SMBUS)) {
psmouse_warn(psmouse,
"The touchpad can support a better bus than the too old PS/2 protocol. "
"Make sure MOUSE_PS2_ELANTECH_SMBUS and MOUSE_ELAN_I2C_SMBUS are enabled to get a better touchpad experience.\n");
}
error = elantech_setup_smbus(psmouse, &info, true);
if (!error)
return PSMOUSE_ELANTECH_SMBUS;
}
#endif /* CONFIG_MOUSE_PS2_ELANTECH_SMBUS */
error = elantech_setup_ps2(psmouse, &info);
if (error < 0) {
/*
* Not using any flavor of Elantech support, so clean up
* SMbus breadcrumbs, if any.
*/
psmouse_smbus_cleanup(psmouse);
goto init_fail;
}
return PSMOUSE_ELANTECH;
init_fail:
psmouse_reset(psmouse);
return error;
}
Codebase Browser
linux