// SPDX-License-Identifier: GPL-2.0-or-later
/******************************************************************************
* usbtouchscreen.c
* Driver for USB Touchscreens, supporting those devices:
* - eGalax Touchkit
* includes eTurboTouch CT-410/510/700
* - 3M/Microtouch EX II series
* - ITM
* - PanJit TouchSet
* - eTurboTouch
* - Gunze AHL61
* - DMC TSC-10/25
* - IRTOUCHSYSTEMS/UNITOP
* - IdealTEK URTC1000
* - General Touch
* - GoTop Super_Q2/GogoPen/PenPower tablets
* - JASTEC USB touch controller/DigiTech DTR-02U
* - Zytronic capacitive touchscreen
* - NEXIO/iNexio
* - Elo TouchSystems 2700 IntelliTouch
* - EasyTouch USB Dual/Multi touch controller from Data Modul
*
* Copyright (C) 2004-2007 by Daniel Ritz <[email protected]>
* Copyright (C) by Todd E. Johnson (mtouchusb.c)
*
* Driver is based on touchkitusb.c
* - ITM parts are from itmtouch.c
* - 3M parts are from mtouchusb.c
* - PanJit parts are from an unmerged driver by Lanslott Gish
* - DMC TSC 10/25 are from Holger Schurig, with ideas from an unmerged
* driver from Marius Vollmer
*
*****************************************************************************/
//#define DEBUG
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/input.h>
#include <linux/module.h>
#include <linux/usb.h>
#include <linux/usb/input.h>
#include <linux/hid.h>
#include <linux/mutex.h>
static bool swap_xy;
module_param(swap_xy, bool, 0644);
MODULE_PARM_DESC(swap_xy, "If set X and Y axes are swapped.");
static bool hwcalib_xy;
module_param(hwcalib_xy, bool, 0644);
MODULE_PARM_DESC(hwcalib_xy, "If set hw-calibrated X/Y are used if available");
/* device specifc data/functions */
struct usbtouch_usb;
struct usbtouch_device_info {
int min_xc, max_xc;
int min_yc, max_yc;
int min_press, max_press;
int rept_size;
/*
* Always service the USB devices irq not just when the input device is
* open. This is useful when devices have a watchdog which prevents us
* from periodically polling the device. Leave this unset unless your
* touchscreen device requires it, as it does consume more of the USB
* bandwidth.
*/
bool irq_always;
/*
* used to get the packet len. possible return values:
* > 0: packet len
* = 0: skip one byte
* < 0: -return value more bytes needed
*/
int (*get_pkt_len) (unsigned char *pkt, int len);
int (*read_data) (struct usbtouch_usb *usbtouch, unsigned char *pkt);
int (*alloc) (struct usbtouch_usb *usbtouch);
int (*init) (struct usbtouch_usb *usbtouch);
void (*exit) (struct usbtouch_usb *usbtouch);
};
/* a usbtouch device */
struct usbtouch_usb {
unsigned char *data;
dma_addr_t data_dma;
int data_size;
unsigned char *buffer;
int buf_len;
struct urb *irq;
struct usb_interface *interface;
struct input_dev *input;
const struct usbtouch_device_info *type;
struct mutex pm_mutex; /* serialize access to open/suspend */
bool is_open;
char name[128];
char phys[64];
void *priv;
int x, y;
int touch, press;
void (*process_pkt)(struct usbtouch_usb *usbtouch, unsigned char *pkt, int len);
};
/*****************************************************************************
* e2i Part
*/
#ifdef CONFIG_TOUCHSCREEN_USB_E2I
static int e2i_init(struct usbtouch_usb *usbtouch)
{
int ret;
struct usb_device *udev = interface_to_usbdev(usbtouch->interface);
ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
0x01, 0x02, 0x0000, 0x0081,
NULL, 0, USB_CTRL_SET_TIMEOUT);
dev_dbg(&usbtouch->interface->dev,
"%s - usb_control_msg - E2I_RESET - bytes|err: %d\n",
__func__, ret);
return ret;
}
static int e2i_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
{
int tmp = (pkt[0] << 8) | pkt[1];
dev->x = (pkt[2] << 8) | pkt[3];
dev->y = (pkt[4] << 8) | pkt[5];
tmp = tmp - 0xA000;
dev->touch = (tmp > 0);
dev->press = (tmp > 0 ? tmp : 0);
return 1;
}
static const struct usbtouch_device_info e2i_dev_info = {
.min_xc = 0x0,
.max_xc = 0x7fff,
.min_yc = 0x0,
.max_yc = 0x7fff,
.rept_size = 6,
.init = e2i_init,
.read_data = e2i_read_data,
};
#endif
/*****************************************************************************
* eGalax part
*/
#ifdef CONFIG_TOUCHSCREEN_USB_EGALAX
#ifndef MULTI_PACKET
#define MULTI_PACKET
#endif
#define EGALAX_PKT_TYPE_MASK 0xFE
#define EGALAX_PKT_TYPE_REPT 0x80
#define EGALAX_PKT_TYPE_DIAG 0x0A
static int egalax_init(struct usbtouch_usb *usbtouch)
{
struct usb_device *udev = interface_to_usbdev(usbtouch->interface);
int ret, i;
/*
* An eGalax diagnostic packet kicks the device into using the right
* protocol. We send a "check active" packet. The response will be
* read later and ignored.
*/
u8 *buf __free(kfree) = kmalloc(3, GFP_KERNEL);
if (!buf)
return -ENOMEM;
buf[0] = EGALAX_PKT_TYPE_DIAG;
buf[1] = 1; /* length */
buf[2] = 'A'; /* command - check active */
for (i = 0; i < 3; i++) {
ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
0,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
0, 0, buf, 3,
USB_CTRL_SET_TIMEOUT);
if (ret != -EPIPE)
break;
}
return ret < 0 ? ret : 0;
}
static int egalax_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
{
if ((pkt[0] & EGALAX_PKT_TYPE_MASK) != EGALAX_PKT_TYPE_REPT)
return 0;
dev->x = ((pkt[3] & 0x0F) << 7) | (pkt[4] & 0x7F);
dev->y = ((pkt[1] & 0x0F) << 7) | (pkt[2] & 0x7F);
dev->touch = pkt[0] & 0x01;
return 1;
}
static int egalax_get_pkt_len(unsigned char *buf, int len)
{
switch (buf[0] & EGALAX_PKT_TYPE_MASK) {
case EGALAX_PKT_TYPE_REPT:
return 5;
case EGALAX_PKT_TYPE_DIAG:
if (len < 2)
return -1;
return buf[1] + 2;
}
return 0;
}
static const struct usbtouch_device_info egalax_dev_info = {
.min_xc = 0x0,
.max_xc = 0x07ff,
.min_yc = 0x0,
.max_yc = 0x07ff,
.rept_size = 16,
.get_pkt_len = egalax_get_pkt_len,
.read_data = egalax_read_data,
.init = egalax_init,
};
#endif
/*****************************************************************************
* EasyTouch part
*/
#ifdef CONFIG_TOUCHSCREEN_USB_EASYTOUCH
#ifndef MULTI_PACKET
#define MULTI_PACKET
#endif
#define ETOUCH_PKT_TYPE_MASK 0xFE
#define ETOUCH_PKT_TYPE_REPT 0x80
#define ETOUCH_PKT_TYPE_REPT2 0xB0
#define ETOUCH_PKT_TYPE_DIAG 0x0A
static int etouch_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
{
if ((pkt[0] & ETOUCH_PKT_TYPE_MASK) != ETOUCH_PKT_TYPE_REPT &&
(pkt[0] & ETOUCH_PKT_TYPE_MASK) != ETOUCH_PKT_TYPE_REPT2)
return 0;
dev->x = ((pkt[1] & 0x1F) << 7) | (pkt[2] & 0x7F);
dev->y = ((pkt[3] & 0x1F) << 7) | (pkt[4] & 0x7F);
dev->touch = pkt[0] & 0x01;
return 1;
}
static int etouch_get_pkt_len(unsigned char *buf, int len)
{
switch (buf[0] & ETOUCH_PKT_TYPE_MASK) {
case ETOUCH_PKT_TYPE_REPT:
case ETOUCH_PKT_TYPE_REPT2:
return 5;
case ETOUCH_PKT_TYPE_DIAG:
if (len < 2)
return -1;
return buf[1] + 2;
}
return 0;
}
static const struct usbtouch_device_info etouch_dev_info = {
.min_xc = 0x0,
.max_xc = 0x07ff,
.min_yc = 0x0,
.max_yc = 0x07ff,
.rept_size = 16,
.get_pkt_len = etouch_get_pkt_len,
.read_data = etouch_read_data,
};
#endif
/*****************************************************************************
* PanJit Part
*/
#ifdef CONFIG_TOUCHSCREEN_USB_PANJIT
static int panjit_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
{
dev->x = ((pkt[2] & 0x0F) << 8) | pkt[1];
dev->y = ((pkt[4] & 0x0F) << 8) | pkt[3];
dev->touch = pkt[0] & 0x01;
return 1;
}
static const struct usbtouch_device_info panjit_dev_info = {
.min_xc = 0x0,
.max_xc = 0x0fff,
.min_yc = 0x0,
.max_yc = 0x0fff,
.rept_size = 8,
.read_data = panjit_read_data,
};
#endif
/*****************************************************************************
* 3M/Microtouch Part
*/
#ifdef CONFIG_TOUCHSCREEN_USB_3M
#define MTOUCHUSB_ASYNC_REPORT 1
#define MTOUCHUSB_RESET 7
#define MTOUCHUSB_REQ_CTRLLR_ID 10
#define MTOUCHUSB_REQ_CTRLLR_ID_LEN 16
static int mtouch_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
{
if (hwcalib_xy) {
dev->x = (pkt[4] << 8) | pkt[3];
dev->y = 0xffff - ((pkt[6] << 8) | pkt[5]);
} else {
dev->x = (pkt[8] << 8) | pkt[7];
dev->y = (pkt[10] << 8) | pkt[9];
}
dev->touch = (pkt[2] & 0x40) ? 1 : 0;
return 1;
}
struct mtouch_priv {
u8 fw_rev_major;
u8 fw_rev_minor;
};
static int mtouch_get_fw_revision(struct usbtouch_usb *usbtouch)
{
struct usb_device *udev = interface_to_usbdev(usbtouch->interface);
struct mtouch_priv *priv = usbtouch->priv;
int ret;
u8 *buf __free(kfree) = kzalloc(MTOUCHUSB_REQ_CTRLLR_ID_LEN, GFP_NOIO);
if (!buf)
return -ENOMEM;
ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
MTOUCHUSB_REQ_CTRLLR_ID,
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
0, 0, buf, MTOUCHUSB_REQ_CTRLLR_ID_LEN,
USB_CTRL_SET_TIMEOUT);
if (ret != MTOUCHUSB_REQ_CTRLLR_ID_LEN) {
dev_warn(&usbtouch->interface->dev,
"Failed to read FW rev: %d\n", ret);
return ret < 0 ? ret : -EIO;
}
priv->fw_rev_major = buf[3];
priv->fw_rev_minor = buf[4];
return 0;
}
static int mtouch_alloc(struct usbtouch_usb *usbtouch)
{
struct mtouch_priv *priv;
priv = kmalloc(sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
usbtouch->priv = priv;
return 0;
}
static int mtouch_init(struct usbtouch_usb *usbtouch)
{
int ret, i;
struct usb_device *udev = interface_to_usbdev(usbtouch->interface);
ret = mtouch_get_fw_revision(usbtouch);
if (ret)
return ret;
ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
MTOUCHUSB_RESET,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
1, 0, NULL, 0, USB_CTRL_SET_TIMEOUT);
dev_dbg(&usbtouch->interface->dev,
"%s - usb_control_msg - MTOUCHUSB_RESET - bytes|err: %d\n",
__func__, ret);
if (ret < 0)
return ret;
msleep(150);
for (i = 0; i < 3; i++) {
ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
MTOUCHUSB_ASYNC_REPORT,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
1, 1, NULL, 0, USB_CTRL_SET_TIMEOUT);
dev_dbg(&usbtouch->interface->dev,
"%s - usb_control_msg - MTOUCHUSB_ASYNC_REPORT - bytes|err: %d\n",
__func__, ret);
if (ret >= 0)
break;
if (ret != -EPIPE)
return ret;
}
/* Default min/max xy are the raw values, override if using hw-calib */
if (hwcalib_xy) {
input_set_abs_params(usbtouch->input, ABS_X, 0, 0xffff, 0, 0);
input_set_abs_params(usbtouch->input, ABS_Y, 0, 0xffff, 0, 0);
}
return 0;
}
static void mtouch_exit(struct usbtouch_usb *usbtouch)
{
struct mtouch_priv *priv = usbtouch->priv;
kfree(priv);
}
static struct usbtouch_device_info mtouch_dev_info = {
.min_xc = 0x0,
.max_xc = 0x4000,
.min_yc = 0x0,
.max_yc = 0x4000,
.rept_size = 11,
.read_data = mtouch_read_data,
.alloc = mtouch_alloc,
.init = mtouch_init,
.exit = mtouch_exit,
};
static ssize_t mtouch_firmware_rev_show(struct device *dev,
struct device_attribute *attr, char *output)
{
struct usb_interface *intf = to_usb_interface(dev);
struct usbtouch_usb *usbtouch = usb_get_intfdata(intf);
struct mtouch_priv *priv = usbtouch->priv;
return sysfs_emit(output, "%1x.%1x\n",
priv->fw_rev_major, priv->fw_rev_minor);
}
static DEVICE_ATTR(firmware_rev, 0444, mtouch_firmware_rev_show, NULL);
static struct attribute *mtouch_attrs[] = {
&dev_attr_firmware_rev.attr,
NULL
};
static bool mtouch_group_visible(struct kobject *kobj)
{
struct device *dev = kobj_to_dev(kobj);
struct usb_interface *intf = to_usb_interface(dev);
struct usbtouch_usb *usbtouch = usb_get_intfdata(intf);
return usbtouch->type == &mtouch_dev_info;
}
DEFINE_SIMPLE_SYSFS_GROUP_VISIBLE(mtouch);
static const struct attribute_group mtouch_attr_group = {
.is_visible = SYSFS_GROUP_VISIBLE(mtouch),
.attrs = mtouch_attrs,
};
#endif
/*****************************************************************************
* ITM Part
*/
#ifdef CONFIG_TOUCHSCREEN_USB_ITM
static int itm_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
{
int touch;
/*
* ITM devices report invalid x/y data if not touched.
* if the screen was touched before but is not touched any more
* report touch as 0 with the last valid x/y data once. then stop
* reporting data until touched again.
*/
dev->press = ((pkt[2] & 0x01) << 7) | (pkt[5] & 0x7F);
touch = ~pkt[7] & 0x20;
if (!touch) {
if (dev->touch) {
dev->touch = 0;
return 1;
}
return 0;
}
dev->x = ((pkt[0] & 0x1F) << 7) | (pkt[3] & 0x7F);
dev->y = ((pkt[1] & 0x1F) << 7) | (pkt[4] & 0x7F);
dev->touch = touch;
return 1;
}
static const struct usbtouch_device_info itm_dev_info = {
.min_xc = 0x0,
.max_xc = 0x0fff,
.min_yc = 0x0,
.max_yc = 0x0fff,
.max_press = 0xff,
.rept_size = 8,
.read_data = itm_read_data,
};
#endif
/*****************************************************************************
* eTurboTouch part
*/
#ifdef CONFIG_TOUCHSCREEN_USB_ETURBO
#ifndef MULTI_PACKET
#define MULTI_PACKET
#endif
static int eturbo_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
{
unsigned int shift;
/* packets should start with sync */
if (!(pkt[0] & 0x80))
return 0;
shift = (6 - (pkt[0] & 0x03));
dev->x = ((pkt[3] << 7) | pkt[4]) >> shift;
dev->y = ((pkt[1] << 7) | pkt[2]) >> shift;
dev->touch = (pkt[0] & 0x10) ? 1 : 0;
return 1;
}
static int eturbo_get_pkt_len(unsigned char *buf, int len)
{
if (buf[0] & 0x80)
return 5;
if (buf[0] == 0x01)
return 3;
return 0;
}
static const struct usbtouch_device_info eturbo_dev_info = {
.min_xc = 0x0,
.max_xc = 0x07ff,
.min_yc = 0x0,
.max_yc = 0x07ff,
.rept_size = 8,
.get_pkt_len = eturbo_get_pkt_len,
.read_data = eturbo_read_data,
};
#endif
/*****************************************************************************
* Gunze part
*/
#ifdef CONFIG_TOUCHSCREEN_USB_GUNZE
static int gunze_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
{
if (!(pkt[0] & 0x80) || ((pkt[1] | pkt[2] | pkt[3]) & 0x80))
return 0;
dev->x = ((pkt[0] & 0x1F) << 7) | (pkt[2] & 0x7F);
dev->y = ((pkt[1] & 0x1F) << 7) | (pkt[3] & 0x7F);
dev->touch = pkt[0] & 0x20;
return 1;
}
static const struct usbtouch_device_info gunze_dev_info = {
.min_xc = 0x0,
.max_xc = 0x0fff,
.min_yc = 0x0,
.max_yc = 0x0fff,
.rept_size = 4,
.read_data = gunze_read_data,
};
#endif
/*****************************************************************************
* DMC TSC-10/25 Part
*
* Documentation about the controller and it's protocol can be found at
* http://www.dmccoltd.com/files/controler/tsc10usb_pi_e.pdf
* http://www.dmccoltd.com/files/controler/tsc25_usb_e.pdf
*/
#ifdef CONFIG_TOUCHSCREEN_USB_DMC_TSC10
/* supported data rates. currently using 130 */
#define TSC10_RATE_POINT 0x50
#define TSC10_RATE_30 0x40
#define TSC10_RATE_50 0x41
#define TSC10_RATE_80 0x42
#define TSC10_RATE_100 0x43
#define TSC10_RATE_130 0x44
#define TSC10_RATE_150 0x45
/* commands */
#define TSC10_CMD_RESET 0x55
#define TSC10_CMD_RATE 0x05
#define TSC10_CMD_DATA1 0x01
static int dmc_tsc10_init(struct usbtouch_usb *usbtouch)
{
struct usb_device *dev = interface_to_usbdev(usbtouch->interface);
int ret;
u8 *buf __free(kfree) = kmalloc(2, GFP_NOIO);
if (!buf)
return -ENOMEM;
/* reset */
buf[0] = buf[1] = 0xFF;
ret = usb_control_msg(dev, usb_rcvctrlpipe (dev, 0),
TSC10_CMD_RESET,
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
0, 0, buf, 2, USB_CTRL_SET_TIMEOUT);
if (ret < 0)
return ret;
if (buf[0] != 0x06)
return -ENODEV;
/* TSC-25 data sheet specifies a delay after the RESET command */
msleep(150);
/* set coordinate output rate */
buf[0] = buf[1] = 0xFF;
ret = usb_control_msg(dev, usb_rcvctrlpipe (dev, 0),
TSC10_CMD_RATE,
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
TSC10_RATE_150, 0, buf, 2, USB_CTRL_SET_TIMEOUT);
if (ret < 0)
return ret;
if (buf[0] != 0x06 && (buf[0] != 0x15 || buf[1] != 0x01))
return -ENODEV;
/* start sending data */
return usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
TSC10_CMD_DATA1,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
0, 0, NULL, 0, USB_CTRL_SET_TIMEOUT);
}
static int dmc_tsc10_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
{
dev->x = ((pkt[2] & 0x03) << 8) | pkt[1];
dev->y = ((pkt[4] & 0x03) << 8) | pkt[3];
dev->touch = pkt[0] & 0x01;
return 1;
}
static const struct usbtouch_device_info dmc_tsc10_dev_info = {
.min_xc = 0x0,
.max_xc = 0x03ff,
.min_yc = 0x0,
.max_yc = 0x03ff,
.rept_size = 5,
.init = dmc_tsc10_init,
.read_data = dmc_tsc10_read_data,
};
#endif
/*****************************************************************************
* IRTOUCH Part
*/
#ifdef CONFIG_TOUCHSCREEN_USB_IRTOUCH
static int irtouch_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
{
dev->x = (pkt[3] << 8) | pkt[2];
dev->y = (pkt[5] << 8) | pkt[4];
dev->touch = (pkt[1] & 0x03) ? 1 : 0;
return 1;
}
static const struct usbtouch_device_info irtouch_dev_info = {
.min_xc = 0x0,
.max_xc = 0x0fff,
.min_yc = 0x0,
.max_yc = 0x0fff,
.rept_size = 8,
.read_data = irtouch_read_data,
};
static const struct usbtouch_device_info irtouch_hires_dev_info = {
.min_xc = 0x0,
.max_xc = 0x7fff,
.min_yc = 0x0,
.max_yc = 0x7fff,
.rept_size = 8,
.read_data = irtouch_read_data,
};
#endif
/*****************************************************************************
* ET&T TC5UH/TC4UM part
*/
#ifdef CONFIG_TOUCHSCREEN_USB_ETT_TC45USB
static int tc45usb_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
{
dev->x = ((pkt[2] & 0x0F) << 8) | pkt[1];
dev->y = ((pkt[4] & 0x0F) << 8) | pkt[3];
dev->touch = pkt[0] & 0x01;
return 1;
}
static const struct usbtouch_device_info tc45usb_dev_info = {
.min_xc = 0x0,
.max_xc = 0x0fff,
.min_yc = 0x0,
.max_yc = 0x0fff,
.rept_size = 5,
.read_data = tc45usb_read_data,
};
#endif
/*****************************************************************************
* IdealTEK URTC1000 Part
*/
#ifdef CONFIG_TOUCHSCREEN_USB_IDEALTEK
#ifndef MULTI_PACKET
#define MULTI_PACKET
#endif
static int idealtek_get_pkt_len(unsigned char *buf, int len)
{
if (buf[0] & 0x80)
return 5;
if (buf[0] == 0x01)
return len;
return 0;
}
static int idealtek_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
{
switch (pkt[0] & 0x98) {
case 0x88:
/* touch data in IdealTEK mode */
dev->x = (pkt[1] << 5) | (pkt[2] >> 2);
dev->y = (pkt[3] << 5) | (pkt[4] >> 2);
dev->touch = (pkt[0] & 0x40) ? 1 : 0;
return 1;
case 0x98:
/* touch data in MT emulation mode */
dev->x = (pkt[2] << 5) | (pkt[1] >> 2);
dev->y = (pkt[4] << 5) | (pkt[3] >> 2);
dev->touch = (pkt[0] & 0x40) ? 1 : 0;
return 1;
default:
return 0;
}
}
static const struct usbtouch_device_info idealtek_dev_info = {
.min_xc = 0x0,
.max_xc = 0x0fff,
.min_yc = 0x0,
.max_yc = 0x0fff,
.rept_size = 8,
.get_pkt_len = idealtek_get_pkt_len,
.read_data = idealtek_read_data,
};
#endif
/*****************************************************************************
* General Touch Part
*/
#ifdef CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH
static int general_touch_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
{
dev->x = (pkt[2] << 8) | pkt[1];
dev->y = (pkt[4] << 8) | pkt[3];
dev->press = pkt[5] & 0xff;
dev->touch = pkt[0] & 0x01;
return 1;
}
static const struct usbtouch_device_info general_touch_dev_info = {
.min_xc = 0x0,
.max_xc = 0x7fff,
.min_yc = 0x0,
.max_yc = 0x7fff,
.rept_size = 7,
.read_data = general_touch_read_data,
};
#endif
/*****************************************************************************
* GoTop Part
*/
#ifdef CONFIG_TOUCHSCREEN_USB_GOTOP
static int gotop_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
{
dev->x = ((pkt[1] & 0x38) << 4) | pkt[2];
dev->y = ((pkt[1] & 0x07) << 7) | pkt[3];
dev->touch = pkt[0] & 0x01;
return 1;
}
static const struct usbtouch_device_info gotop_dev_info = {
.min_xc = 0x0,
.max_xc = 0x03ff,
.min_yc = 0x0,
.max_yc = 0x03ff,
.rept_size = 4,
.read_data = gotop_read_data,
};
#endif
/*****************************************************************************
* JASTEC Part
*/
#ifdef CONFIG_TOUCHSCREEN_USB_JASTEC
static int jastec_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
{
dev->x = ((pkt[0] & 0x3f) << 6) | (pkt[2] & 0x3f);
dev->y = ((pkt[1] & 0x3f) << 6) | (pkt[3] & 0x3f);
dev->touch = (pkt[0] & 0x40) >> 6;
return 1;
}
static const struct usbtouch_device_info jastec_dev_info = {
.min_xc = 0x0,
.max_xc = 0x0fff,
.min_yc = 0x0,
.max_yc = 0x0fff,
.rept_size = 4,
.read_data = jastec_read_data,
};
#endif
/*****************************************************************************
* Zytronic Part
*/
#ifdef CONFIG_TOUCHSCREEN_USB_ZYTRONIC
static int zytronic_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
{
struct usb_interface *intf = dev->interface;
switch (pkt[0]) {
case 0x3A: /* command response */
dev_dbg(&intf->dev, "%s: Command response %d\n", __func__, pkt[1]);
break;
case 0xC0: /* down */
dev->x = (pkt[1] & 0x7f) | ((pkt[2] & 0x07) << 7);
dev->y = (pkt[3] & 0x7f) | ((pkt[4] & 0x07) << 7);
dev->touch = 1;
dev_dbg(&intf->dev, "%s: down %d,%d\n", __func__, dev->x, dev->y);
return 1;
case 0x80: /* up */
dev->x = (pkt[1] & 0x7f) | ((pkt[2] & 0x07) << 7);
dev->y = (pkt[3] & 0x7f) | ((pkt[4] & 0x07) << 7);
dev->touch = 0;
dev_dbg(&intf->dev, "%s: up %d,%d\n", __func__, dev->x, dev->y);
return 1;
default:
dev_dbg(&intf->dev, "%s: Unknown return %d\n", __func__, pkt[0]);
break;
}
return 0;
}
static const struct usbtouch_device_info zytronic_dev_info = {
.min_xc = 0x0,
.max_xc = 0x03ff,
.min_yc = 0x0,
.max_yc = 0x03ff,
.rept_size = 5,
.read_data = zytronic_read_data,
.irq_always = true,
};
#endif
/*****************************************************************************
* NEXIO Part
*/
#ifdef CONFIG_TOUCHSCREEN_USB_NEXIO
#define NEXIO_TIMEOUT 5000
#define NEXIO_BUFSIZE 1024
#define NEXIO_THRESHOLD 50
struct nexio_priv {
struct urb *ack;
unsigned char *ack_buf;
};
struct nexio_touch_packet {
u8 flags; /* 0xe1 = touch, 0xe1 = release */
__be16 data_len; /* total bytes of touch data */
__be16 x_len; /* bytes for X axis */
__be16 y_len; /* bytes for Y axis */
u8 data[];
} __attribute__ ((packed));
static unsigned char nexio_ack_pkt[2] = { 0xaa, 0x02 };
static unsigned char nexio_init_pkt[4] = { 0x82, 0x04, 0x0a, 0x0f };
static void nexio_ack_complete(struct urb *urb)
{
}
static int nexio_alloc(struct usbtouch_usb *usbtouch)
{
struct nexio_priv *priv;
int ret = -ENOMEM;
priv = kmalloc(sizeof(*priv), GFP_KERNEL);
if (!priv)
goto out_buf;
usbtouch->priv = priv;
priv->ack_buf = kmemdup(nexio_ack_pkt, sizeof(nexio_ack_pkt),
GFP_KERNEL);
if (!priv->ack_buf)
goto err_priv;
priv->ack = usb_alloc_urb(0, GFP_KERNEL);
if (!priv->ack) {
dev_dbg(&usbtouch->interface->dev,
"%s - usb_alloc_urb failed: usbtouch->ack\n", __func__);
goto err_ack_buf;
}
return 0;
err_ack_buf:
kfree(priv->ack_buf);
err_priv:
kfree(priv);
out_buf:
return ret;
}
static int nexio_init(struct usbtouch_usb *usbtouch)
{
struct usb_device *dev = interface_to_usbdev(usbtouch->interface);
struct usb_host_interface *interface = usbtouch->interface->cur_altsetting;
struct nexio_priv *priv = usbtouch->priv;
int ret = -ENOMEM;
int actual_len, i;
char *firmware_ver = NULL, *device_name = NULL;
int input_ep = 0, output_ep = 0;
/* find first input and output endpoint */
for (i = 0; i < interface->desc.bNumEndpoints; i++) {
if (!input_ep &&
usb_endpoint_dir_in(&interface->endpoint[i].desc))
input_ep = interface->endpoint[i].desc.bEndpointAddress;
if (!output_ep &&
usb_endpoint_dir_out(&interface->endpoint[i].desc))
output_ep = interface->endpoint[i].desc.bEndpointAddress;
}
if (!input_ep || !output_ep)
return -ENXIO;
u8 *buf __free(kfree) = kmalloc(NEXIO_BUFSIZE, GFP_NOIO);
if (!buf)
return -ENOMEM;
/* two empty reads */
for (i = 0; i < 2; i++) {
ret = usb_bulk_msg(dev, usb_rcvbulkpipe(dev, input_ep),
buf, NEXIO_BUFSIZE, &actual_len,
NEXIO_TIMEOUT);
if (ret < 0)
return ret;
}
/* send init command */
memcpy(buf, nexio_init_pkt, sizeof(nexio_init_pkt));
ret = usb_bulk_msg(dev, usb_sndbulkpipe(dev, output_ep),
buf, sizeof(nexio_init_pkt), &actual_len,
NEXIO_TIMEOUT);
if (ret < 0)
return ret;
/* read replies */
for (i = 0; i < 3; i++) {
memset(buf, 0, NEXIO_BUFSIZE);
ret = usb_bulk_msg(dev, usb_rcvbulkpipe(dev, input_ep),
buf, NEXIO_BUFSIZE, &actual_len,
NEXIO_TIMEOUT);
if (ret < 0 || actual_len < 1 || buf[1] != actual_len)
continue;
switch (buf[0]) {
case 0x83: /* firmware version */
if (!firmware_ver)
firmware_ver = kstrdup(&buf[2], GFP_NOIO);
break;
case 0x84: /* device name */
if (!device_name)
device_name = kstrdup(&buf[2], GFP_NOIO);
break;
}
}
printk(KERN_INFO "Nexio device: %s, firmware version: %s\n",
device_name, firmware_ver);
kfree(firmware_ver);
kfree(device_name);
usb_fill_bulk_urb(priv->ack, dev, usb_sndbulkpipe(dev, output_ep),
priv->ack_buf, sizeof(nexio_ack_pkt),
nexio_ack_complete, usbtouch);
return 0;
}
static void nexio_exit(struct usbtouch_usb *usbtouch)
{
struct nexio_priv *priv = usbtouch->priv;
usb_kill_urb(priv->ack);
usb_free_urb(priv->ack);
kfree(priv->ack_buf);
kfree(priv);
}
static int nexio_read_data(struct usbtouch_usb *usbtouch, unsigned char *pkt)
{
struct device *dev = &usbtouch->interface->dev;
struct nexio_touch_packet *packet = (void *) pkt;
struct nexio_priv *priv = usbtouch->priv;
unsigned int data_len = be16_to_cpu(packet->data_len);
unsigned int x_len = be16_to_cpu(packet->x_len);
unsigned int y_len = be16_to_cpu(packet->y_len);
int x, y, begin_x, begin_y, end_x, end_y, w, h, ret;
/* got touch data? */
if ((pkt[0] & 0xe0) != 0xe0)
return 0;
if (data_len > 0xff)
data_len -= 0x100;
if (x_len > 0xff)
x_len -= 0x80;
/* send ACK */
ret = usb_submit_urb(priv->ack, GFP_ATOMIC);
if (ret)
dev_warn(dev, "Failed to submit ACK URB: %d\n", ret);
if (!input_abs_get_max(usbtouch->input, ABS_X)) {
input_set_abs_params(usbtouch->input, ABS_X,
0, 2 * x_len, 0, 0);
input_set_abs_params(usbtouch->input, ABS_Y,
0, 2 * y_len, 0, 0);
}
/*
* The device reports state of IR sensors on X and Y axes.
* Each byte represents "darkness" percentage (0-100) of one element.
* 17" touchscreen reports only 64 x 52 bytes so the resolution is low.
* This also means that there's a limited multi-touch capability but
* it's disabled (and untested) here as there's no X driver for that.
*/
begin_x = end_x = begin_y = end_y = -1;
for (x = 0; x < x_len; x++) {
if (begin_x == -1 && packet->data[x] > NEXIO_THRESHOLD) {
begin_x = x;
continue;
}
if (end_x == -1 && begin_x != -1 && packet->data[x] < NEXIO_THRESHOLD) {
end_x = x - 1;
for (y = x_len; y < data_len; y++) {
if (begin_y == -1 && packet->data[y] > NEXIO_THRESHOLD) {
begin_y = y - x_len;
continue;
}
if (end_y == -1 &&
begin_y != -1 && packet->data[y] < NEXIO_THRESHOLD) {
end_y = y - 1 - x_len;
w = end_x - begin_x;
h = end_y - begin_y;
#if 0
/* multi-touch */
input_report_abs(usbtouch->input,
ABS_MT_TOUCH_MAJOR, max(w,h));
input_report_abs(usbtouch->input,
ABS_MT_TOUCH_MINOR, min(x,h));
input_report_abs(usbtouch->input,
ABS_MT_POSITION_X, 2*begin_x+w);
input_report_abs(usbtouch->input,
ABS_MT_POSITION_Y, 2*begin_y+h);
input_report_abs(usbtouch->input,
ABS_MT_ORIENTATION, w > h);
input_mt_sync(usbtouch->input);
#endif
/* single touch */
usbtouch->x = 2 * begin_x + w;
usbtouch->y = 2 * begin_y + h;
usbtouch->touch = packet->flags & 0x01;
begin_y = end_y = -1;
return 1;
}
}
begin_x = end_x = -1;
}
}
return 0;
}
static const struct usbtouch_device_info nexio_dev_info = {
.rept_size = 1024,
.irq_always = true,
.read_data = nexio_read_data,
.alloc = nexio_alloc,
.init = nexio_init,
.exit = nexio_exit,
};
#endif
/*****************************************************************************
* ELO part
*/
#ifdef CONFIG_TOUCHSCREEN_USB_ELO
static int elo_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
{
dev->x = (pkt[3] << 8) | pkt[2];
dev->y = (pkt[5] << 8) | pkt[4];
dev->touch = pkt[6] > 0;
dev->press = pkt[6];
return 1;
}
static const struct usbtouch_device_info elo_dev_info = {
.min_xc = 0x0,
.max_xc = 0x0fff,
.min_yc = 0x0,
.max_yc = 0x0fff,
.max_press = 0xff,
.rept_size = 8,
.read_data = elo_read_data,
};
#endif
/*****************************************************************************
* Generic Part
*/
static void usbtouch_process_pkt(struct usbtouch_usb *usbtouch,
unsigned char *pkt, int len)
{
const struct usbtouch_device_info *type = usbtouch->type;
if (!type->read_data(usbtouch, pkt))
return;
input_report_key(usbtouch->input, BTN_TOUCH, usbtouch->touch);
if (swap_xy) {
input_report_abs(usbtouch->input, ABS_X, usbtouch->y);
input_report_abs(usbtouch->input, ABS_Y, usbtouch->x);
} else {
input_report_abs(usbtouch->input, ABS_X, usbtouch->x);
input_report_abs(usbtouch->input, ABS_Y, usbtouch->y);
}
if (type->max_press)
input_report_abs(usbtouch->input, ABS_PRESSURE, usbtouch->press);
input_sync(usbtouch->input);
}
#ifdef MULTI_PACKET
static void usbtouch_process_multi(struct usbtouch_usb *usbtouch,
unsigned char *pkt, int len)
{
unsigned char *buffer;
int pkt_len, pos, buf_len, tmp;
/* process buffer */
if (unlikely(usbtouch->buf_len)) {
/* try to get size */
pkt_len = usbtouch->type->get_pkt_len(
usbtouch->buffer, usbtouch->buf_len);
/* drop? */
if (unlikely(!pkt_len))
goto out_flush_buf;
/* need to append -pkt_len bytes before able to get size */
if (unlikely(pkt_len < 0)) {
int append = -pkt_len;
if (unlikely(append > len))
append = len;
if (usbtouch->buf_len + append >= usbtouch->type->rept_size)
goto out_flush_buf;
memcpy(usbtouch->buffer + usbtouch->buf_len, pkt, append);
usbtouch->buf_len += append;
pkt_len = usbtouch->type->get_pkt_len(
usbtouch->buffer, usbtouch->buf_len);
if (pkt_len < 0)
return;
}
/* append */
tmp = pkt_len - usbtouch->buf_len;
if (usbtouch->buf_len + tmp >= usbtouch->type->rept_size)
goto out_flush_buf;
memcpy(usbtouch->buffer + usbtouch->buf_len, pkt, tmp);
usbtouch_process_pkt(usbtouch, usbtouch->buffer, pkt_len);
buffer = pkt + tmp;
buf_len = len - tmp;
} else {
buffer = pkt;
buf_len = len;
}
/* loop over the received packet, process */
pos = 0;
while (pos < buf_len) {
/* get packet len */
pkt_len = usbtouch->type->get_pkt_len(buffer + pos,
buf_len - pos);
/* unknown packet: skip one byte */
if (unlikely(!pkt_len)) {
pos++;
continue;
}
/* full packet: process */
if (likely((pkt_len > 0) && (pkt_len <= buf_len - pos))) {
usbtouch_process_pkt(usbtouch, buffer + pos, pkt_len);
} else {
/* incomplete packet: save in buffer */
memcpy(usbtouch->buffer, buffer + pos, buf_len - pos);
usbtouch->buf_len = buf_len - pos;
return;
}
pos += pkt_len;
}
out_flush_buf:
usbtouch->buf_len = 0;
return;
}
#else
static void usbtouch_process_multi(struct usbtouch_usb *usbtouch,
unsigned char *pkt, int len)
{
dev_WARN_ONCE(&usbtouch->interface->dev, 1,
"Protocol has ->get_pkt_len() without #define MULTI_PACKET");
}
#endif
static void usbtouch_irq(struct urb *urb)
{
struct usbtouch_usb *usbtouch = urb->context;
struct device *dev = &usbtouch->interface->dev;
int retval;
switch (urb->status) {
case 0:
/* success */
break;
case -ETIME:
/* this urb is timing out */
dev_dbg(dev,
"%s - urb timed out - was the device unplugged?\n",
__func__);
return;
case -ECONNRESET:
case -ENOENT:
case -ESHUTDOWN:
case -EPIPE:
/* this urb is terminated, clean up */
dev_dbg(dev, "%s - urb shutting down with status: %d\n",
__func__, urb->status);
return;
default:
dev_dbg(dev, "%s - nonzero urb status received: %d\n",
__func__, urb->status);
goto exit;
}
usbtouch->process_pkt(usbtouch, usbtouch->data, urb->actual_length);
exit:
usb_mark_last_busy(interface_to_usbdev(usbtouch->interface));
retval = usb_submit_urb(urb, GFP_ATOMIC);
if (retval)
dev_err(dev, "%s - usb_submit_urb failed with result: %d\n",
__func__, retval);
}
static int usbtouch_start_io(struct usbtouch_usb *usbtouch)
{
guard(mutex)(&usbtouch->pm_mutex);
if (!usbtouch->type->irq_always)
if (usb_submit_urb(usbtouch->irq, GFP_KERNEL))
return -EIO;
usbtouch->interface->needs_remote_wakeup = 1;
usbtouch->is_open = true;
return 0;
}
static int usbtouch_open(struct input_dev *input)
{
struct usbtouch_usb *usbtouch = input_get_drvdata(input);
int r;
usbtouch->irq->dev = interface_to_usbdev(usbtouch->interface);
r = usb_autopm_get_interface(usbtouch->interface) ? -EIO : 0;
if (r)
return r;
r = usbtouch_start_io(usbtouch);
usb_autopm_put_interface(usbtouch->interface);
return r;
}
static void usbtouch_close(struct input_dev *input)
{
struct usbtouch_usb *usbtouch = input_get_drvdata(input);
int r;
scoped_guard(mutex, &usbtouch->pm_mutex) {
if (!usbtouch->type->irq_always)
usb_kill_urb(usbtouch->irq);
usbtouch->is_open = false;
}
r = usb_autopm_get_interface(usbtouch->interface);
usbtouch->interface->needs_remote_wakeup = 0;
if (!r)
usb_autopm_put_interface(usbtouch->interface);
}
static int usbtouch_suspend(struct usb_interface *intf, pm_message_t message)
{
struct usbtouch_usb *usbtouch = usb_get_intfdata(intf);
usb_kill_urb(usbtouch->irq);
return 0;
}
static int usbtouch_resume(struct usb_interface *intf)
{
struct usbtouch_usb *usbtouch = usb_get_intfdata(intf);
guard(mutex)(&usbtouch->pm_mutex);
if (usbtouch->is_open || usbtouch->type->irq_always)
return usb_submit_urb(usbtouch->irq, GFP_NOIO);
return 0;
}
static int usbtouch_reset_resume(struct usb_interface *intf)
{
struct usbtouch_usb *usbtouch = usb_get_intfdata(intf);
int err;
/* reinit the device */
if (usbtouch->type->init) {
err = usbtouch->type->init(usbtouch);
if (err) {
dev_dbg(&intf->dev,
"%s - type->init() failed, err: %d\n",
__func__, err);
return err;
}
}
/* restart IO if needed */
guard(mutex)(&usbtouch->pm_mutex);
if (usbtouch->is_open)
return usb_submit_urb(usbtouch->irq, GFP_NOIO);
return 0;
}
static void usbtouch_free_buffers(struct usb_device *udev,
struct usbtouch_usb *usbtouch)
{
usb_free_coherent(udev, usbtouch->data_size,
usbtouch->data, usbtouch->data_dma);
kfree(usbtouch->buffer);
}
static struct usb_endpoint_descriptor *
usbtouch_get_input_endpoint(struct usb_host_interface *interface)
{
int i;
for (i = 0; i < interface->desc.bNumEndpoints; i++)
if (usb_endpoint_dir_in(&interface->endpoint[i].desc))
return &interface->endpoint[i].desc;
return NULL;
}
static int usbtouch_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
struct usbtouch_usb *usbtouch;
struct input_dev *input_dev;
struct usb_endpoint_descriptor *endpoint;
struct usb_device *udev = interface_to_usbdev(intf);
const struct usbtouch_device_info *type;
int err = -ENOMEM;
/* some devices are ignored */
type = (const struct usbtouch_device_info *)id->driver_info;
if (!type)
return -ENODEV;
endpoint = usbtouch_get_input_endpoint(intf->cur_altsetting);
if (!endpoint)
return -ENXIO;
usbtouch = kzalloc(sizeof(*usbtouch), GFP_KERNEL);
input_dev = input_allocate_device();
if (!usbtouch || !input_dev)
goto out_free;
mutex_init(&usbtouch->pm_mutex);
usbtouch->type = type;
usbtouch->data_size = type->rept_size;
if (type->get_pkt_len) {
/*
* When dealing with variable-length packets we should
* not request more than wMaxPacketSize bytes at once
* as we do not know if there is more data coming or
* we filled exactly wMaxPacketSize bytes and there is
* nothing else.
*/
usbtouch->data_size = min(usbtouch->data_size,
usb_endpoint_maxp(endpoint));
}
usbtouch->data = usb_alloc_coherent(udev, usbtouch->data_size,
GFP_KERNEL, &usbtouch->data_dma);
if (!usbtouch->data)
goto out_free;
if (type->get_pkt_len) {
usbtouch->buffer = kmalloc(type->rept_size, GFP_KERNEL);
if (!usbtouch->buffer)
goto out_free_buffers;
usbtouch->process_pkt = usbtouch_process_multi;
} else {
usbtouch->process_pkt = usbtouch_process_pkt;
}
usbtouch->irq = usb_alloc_urb(0, GFP_KERNEL);
if (!usbtouch->irq) {
dev_dbg(&intf->dev,
"%s - usb_alloc_urb failed: usbtouch->irq\n", __func__);
goto out_free_buffers;
}
usbtouch->interface = intf;
usbtouch->input = input_dev;
if (udev->manufacturer)
strscpy(usbtouch->name, udev->manufacturer, sizeof(usbtouch->name));
if (udev->product) {
if (udev->manufacturer)
strlcat(usbtouch->name, " ", sizeof(usbtouch->name));
strlcat(usbtouch->name, udev->product, sizeof(usbtouch->name));
}
if (!strlen(usbtouch->name))
snprintf(usbtouch->name, sizeof(usbtouch->name),
"USB Touchscreen %04x:%04x",
le16_to_cpu(udev->descriptor.idVendor),
le16_to_cpu(udev->descriptor.idProduct));
usb_make_path(udev, usbtouch->phys, sizeof(usbtouch->phys));
strlcat(usbtouch->phys, "/input0", sizeof(usbtouch->phys));
input_dev->name = usbtouch->name;
input_dev->phys = usbtouch->phys;
usb_to_input_id(udev, &input_dev->id);
input_dev->dev.parent = &intf->dev;
input_set_drvdata(input_dev, usbtouch);
input_dev->open = usbtouch_open;
input_dev->close = usbtouch_close;
input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
input_set_abs_params(input_dev, ABS_X, type->min_xc, type->max_xc, 0, 0);
input_set_abs_params(input_dev, ABS_Y, type->min_yc, type->max_yc, 0, 0);
if (type->max_press)
input_set_abs_params(input_dev, ABS_PRESSURE, type->min_press,
type->max_press, 0, 0);
if (usb_endpoint_type(endpoint) == USB_ENDPOINT_XFER_INT)
usb_fill_int_urb(usbtouch->irq, udev,
usb_rcvintpipe(udev, endpoint->bEndpointAddress),
usbtouch->data, usbtouch->data_size,
usbtouch_irq, usbtouch, endpoint->bInterval);
else
usb_fill_bulk_urb(usbtouch->irq, udev,
usb_rcvbulkpipe(udev, endpoint->bEndpointAddress),
usbtouch->data, usbtouch->data_size,
usbtouch_irq, usbtouch);
usbtouch->irq->dev = udev;
usbtouch->irq->transfer_dma = usbtouch->data_dma;
usbtouch->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
/* device specific allocations */
if (type->alloc) {
err = type->alloc(usbtouch);
if (err) {
dev_dbg(&intf->dev,
"%s - type->alloc() failed, err: %d\n",
__func__, err);
goto out_free_urb;
}
}
/* device specific initialisation*/
if (type->init) {
err = type->init(usbtouch);
if (err) {
dev_dbg(&intf->dev,
"%s - type->init() failed, err: %d\n",
__func__, err);
goto out_do_exit;
}
}
err = input_register_device(usbtouch->input);
if (err) {
dev_dbg(&intf->dev,
"%s - input_register_device failed, err: %d\n",
__func__, err);
goto out_do_exit;
}
usb_set_intfdata(intf, usbtouch);
if (usbtouch->type->irq_always) {
/* this can't fail */
usb_autopm_get_interface(intf);
err = usb_submit_urb(usbtouch->irq, GFP_KERNEL);
if (err) {
usb_autopm_put_interface(intf);
dev_err(&intf->dev,
"%s - usb_submit_urb failed with result: %d\n",
__func__, err);
goto out_unregister_input;
}
}
return 0;
out_unregister_input:
input_unregister_device(input_dev);
input_dev = NULL;
out_do_exit:
if (type->exit)
type->exit(usbtouch);
out_free_urb:
usb_free_urb(usbtouch->irq);
out_free_buffers:
usbtouch_free_buffers(udev, usbtouch);
out_free:
input_free_device(input_dev);
kfree(usbtouch);
return err;
}
static void usbtouch_disconnect(struct usb_interface *intf)
{
struct usbtouch_usb *usbtouch = usb_get_intfdata(intf);
if (!usbtouch)
return;
dev_dbg(&intf->dev,
"%s - usbtouch is initialized, cleaning up\n", __func__);
usb_set_intfdata(intf, NULL);
/* this will stop IO via close */
input_unregister_device(usbtouch->input);
usb_free_urb(usbtouch->irq);
if (usbtouch->type->exit)
usbtouch->type->exit(usbtouch);
usbtouch_free_buffers(interface_to_usbdev(intf), usbtouch);
kfree(usbtouch);
}
static const struct attribute_group *usbtouch_groups[] = {
#ifdef CONFIG_TOUCHSCREEN_USB_3M
&mtouch_attr_group,
#endif
NULL
};
static const struct usb_device_id usbtouch_devices[] = {
#ifdef CONFIG_TOUCHSCREEN_USB_EGALAX
/* ignore the HID capable devices, handled by usbhid */
{ USB_DEVICE_INTERFACE_CLASS(0x0eef, 0x0001, USB_INTERFACE_CLASS_HID),
.driver_info = 0 },
{ USB_DEVICE_INTERFACE_CLASS(0x0eef, 0x0002, USB_INTERFACE_CLASS_HID),
.driver_info = 0 },
/* normal device IDs */
{ USB_DEVICE(0x3823, 0x0001),
.driver_info = (kernel_ulong_t)&egalax_dev_info },
{ USB_DEVICE(0x3823, 0x0002),
.driver_info = (kernel_ulong_t)&egalax_dev_info },
{ USB_DEVICE(0x0123, 0x0001),
.driver_info = (kernel_ulong_t)&egalax_dev_info },
{ USB_DEVICE(0x0eef, 0x0001),
.driver_info = (kernel_ulong_t)&egalax_dev_info },
{ USB_DEVICE(0x0eef, 0x0002),
.driver_info = (kernel_ulong_t)&egalax_dev_info },
{ USB_DEVICE(0x1234, 0x0001),
.driver_info = (kernel_ulong_t)&egalax_dev_info },
{ USB_DEVICE(0x1234, 0x0002),
.driver_info = (kernel_ulong_t)&egalax_dev_info },
#endif
#ifdef CONFIG_TOUCHSCREEN_USB_PANJIT
{ USB_DEVICE(0x134c, 0x0001),
.driver_info = (kernel_ulong_t)&panjit_dev_info },
{ USB_DEVICE(0x134c, 0x0002),
.driver_info = (kernel_ulong_t)&panjit_dev_info },
{ USB_DEVICE(0x134c, 0x0003),
.driver_info = (kernel_ulong_t)&panjit_dev_info },
{ USB_DEVICE(0x134c, 0x0004),
.driver_info = (kernel_ulong_t)&panjit_dev_info },
#endif
#ifdef CONFIG_TOUCHSCREEN_USB_3M
{ USB_DEVICE(0x0596, 0x0001),
.driver_info = (kernel_ulong_t)&mtouch_dev_info },
#endif
#ifdef CONFIG_TOUCHSCREEN_USB_ITM
{ USB_DEVICE(0x0403, 0xf9e9),
.driver_info = (kernel_ulong_t)&itm_dev_info },
{ USB_DEVICE(0x16e3, 0xf9e9),
.driver_info = (kernel_ulong_t)&itm_dev_info },
#endif
#ifdef CONFIG_TOUCHSCREEN_USB_ETURBO
{ USB_DEVICE(0x1234, 0x5678),
.driver_info = (kernel_ulong_t)&eturbo_dev_info },
#endif
#ifdef CONFIG_TOUCHSCREEN_USB_GUNZE
{ USB_DEVICE(0x0637, 0x0001),
.driver_info = (kernel_ulong_t)&gunze_dev_info },
#endif
#ifdef CONFIG_TOUCHSCREEN_USB_DMC_TSC10
{ USB_DEVICE(0x0afa, 0x03e8),
.driver_info = (kernel_ulong_t)&dmc_tsc10_dev_info },
#endif
#ifdef CONFIG_TOUCHSCREEN_USB_IRTOUCH
{ USB_DEVICE(0x255e, 0x0001),
.driver_info = (kernel_ulong_t)&irtouch_dev_info },
{ USB_DEVICE(0x595a, 0x0001),
.driver_info = (kernel_ulong_t)&irtouch_dev_info },
{ USB_DEVICE(0x6615, 0x0001),
.driver_info = (kernel_ulong_t)&irtouch_dev_info },
{ USB_DEVICE(0x6615, 0x0012),
.driver_info = (kernel_ulong_t)&irtouch_hires_dev_info },
#endif
#ifdef CONFIG_TOUCHSCREEN_USB_IDEALTEK
{ USB_DEVICE(0x1391, 0x1000),
.driver_info = (kernel_ulong_t)&idealtek_dev_info },
#endif
#ifdef CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH
{ USB_DEVICE(0x0dfc, 0x0001),
.driver_info = (kernel_ulong_t)&general_touch_dev_info },
#endif
#ifdef CONFIG_TOUCHSCREEN_USB_GOTOP
{ USB_DEVICE(0x08f2, 0x007f),
.driver_info = (kernel_ulong_t)&gotop_dev_info },
{ USB_DEVICE(0x08f2, 0x00ce),
.driver_info = (kernel_ulong_t)&gotop_dev_info },
{ USB_DEVICE(0x08f2, 0x00f4),
.driver_info = (kernel_ulong_t)&gotop_dev_info },
#endif
#ifdef CONFIG_TOUCHSCREEN_USB_JASTEC
{ USB_DEVICE(0x0f92, 0x0001),
.driver_info = (kernel_ulong_t)&jastec_dev_info },
#endif
#ifdef CONFIG_TOUCHSCREEN_USB_E2I
{ USB_DEVICE(0x1ac7, 0x0001),
.driver_info = (kernel_ulong_t)&e2i_dev_info },
#endif
#ifdef CONFIG_TOUCHSCREEN_USB_ZYTRONIC
{ USB_DEVICE(0x14c8, 0x0003),
.driver_info = (kernel_ulong_t)&zytronic_dev_info },
#endif
#ifdef CONFIG_TOUCHSCREEN_USB_ETT_TC45USB
/* TC5UH */
{ USB_DEVICE(0x0664, 0x0309),
.driver_info = (kernel_ulong_t)&tc45usb_dev_info },
/* TC4UM */
{ USB_DEVICE(0x0664, 0x0306),
.driver_info = (kernel_ulong_t)&tc45usb_dev_info },
#endif
#ifdef CONFIG_TOUCHSCREEN_USB_NEXIO
/* data interface only */
{ USB_DEVICE_AND_INTERFACE_INFO(0x10f0, 0x2002, 0x0a, 0x00, 0x00),
.driver_info = (kernel_ulong_t)&nexio_dev_info },
{ USB_DEVICE_AND_INTERFACE_INFO(0x1870, 0x0001, 0x0a, 0x00, 0x00),
.driver_info = (kernel_ulong_t)&nexio_dev_info },
#endif
#ifdef CONFIG_TOUCHSCREEN_USB_ELO
{ USB_DEVICE(0x04e7, 0x0020),
.driver_info = (kernel_ulong_t)&elo_dev_info },
#endif
#ifdef CONFIG_TOUCHSCREEN_USB_EASYTOUCH
{ USB_DEVICE(0x7374, 0x0001),
.driver_info = (kernel_ulong_t)&etouch_dev_info },
#endif
{ }
};
MODULE_DEVICE_TABLE(usb, usbtouch_devices);
static struct usb_driver usbtouch_driver = {
.name = "usbtouchscreen",
.probe = usbtouch_probe,
.disconnect = usbtouch_disconnect,
.suspend = usbtouch_suspend,
.resume = usbtouch_resume,
.reset_resume = usbtouch_reset_resume,
.id_table = usbtouch_devices,
.dev_groups = usbtouch_groups,
.supports_autosuspend = 1,
};
module_usb_driver(usbtouch_driver);
MODULE_AUTHOR("Daniel Ritz <[email protected]>");
MODULE_DESCRIPTION("USB Touchscreen Driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS("touchkitusb");
MODULE_ALIAS("itmtouch");
MODULE_ALIAS("mtouchusb");
Codebase Browser
linux