// SPDX-License-Identifier: GPL-2.0-or-later
/*
* wm97xx-core.c -- Touch screen driver core for Wolfson WM9705, WM9712
* and WM9713 AC97 Codecs.
*
* Copyright 2003, 2004, 2005, 2006, 2007, 2008 Wolfson Microelectronics PLC.
* Author: Liam Girdwood <[email protected]>
* Parts Copyright : Ian Molton <[email protected]>
* Andrew Zabolotny <[email protected]>
* Russell King <[email protected]>
*
* Notes:
*
* Features:
* - supports WM9705, WM9712, WM9713
* - polling mode
* - continuous mode (arch-dependent)
* - adjustable rpu/dpp settings
* - adjustable pressure current
* - adjustable sample settle delay
* - 4 and 5 wire touchscreens (5 wire is WM9712 only)
* - pen down detection
* - battery monitor
* - sample AUX adcs
* - power management
* - codec GPIO
* - codec event notification
* Todo
* - Support for async sampling control for noisy LCDs.
*/
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/string.h>
#include <linux/proc_fs.h>
#include <linux/pm.h>
#include <linux/interrupt.h>
#include <linux/bitops.h>
#include <linux/mfd/wm97xx.h>
#include <linux/workqueue.h>
#include <linux/wm97xx.h>
#include <linux/uaccess.h>
#include <linux/io.h>
#include <linux/slab.h>
#define TS_NAME "wm97xx"
#define WM_CORE_VERSION "1.00"
#define DEFAULT_PRESSURE 0xb0c0
/*
* Touchscreen absolute values
*
* These parameters are used to help the input layer discard out of
* range readings and reduce jitter etc.
*
* o min, max:- indicate the min and max values your touch screen returns
* o fuzz:- use a higher number to reduce jitter
*
* The default values correspond to Mainstone II in QVGA mode
*
* Please read
* Documentation/input/input-programming.rst for more details.
*/
static int abs_x[3] = {150, 4000, 5};
module_param_array(abs_x, int, NULL, 0);
MODULE_PARM_DESC(abs_x, "Touchscreen absolute X min, max, fuzz");
static int abs_y[3] = {200, 4000, 40};
module_param_array(abs_y, int, NULL, 0);
MODULE_PARM_DESC(abs_y, "Touchscreen absolute Y min, max, fuzz");
static int abs_p[3] = {0, 150, 4};
module_param_array(abs_p, int, NULL, 0);
MODULE_PARM_DESC(abs_p, "Touchscreen absolute Pressure min, max, fuzz");
/*
* wm97xx IO access, all IO locking done by AC97 layer
*/
int wm97xx_reg_read(struct wm97xx *wm, u16 reg)
{
if (wm->ac97)
return wm->ac97->bus->ops->read(wm->ac97, reg);
else
return -1;
}
EXPORT_SYMBOL_GPL(wm97xx_reg_read);
void wm97xx_reg_write(struct wm97xx *wm, u16 reg, u16 val)
{
/* cache digitiser registers */
if (reg >= AC97_WM9713_DIG1 && reg <= AC97_WM9713_DIG3)
wm->dig[(reg - AC97_WM9713_DIG1) >> 1] = val;
/* cache gpio regs */
if (reg >= AC97_GPIO_CFG && reg <= AC97_MISC_AFE)
wm->gpio[(reg - AC97_GPIO_CFG) >> 1] = val;
/* wm9713 irq reg */
if (reg == 0x5a)
wm->misc = val;
if (wm->ac97)
wm->ac97->bus->ops->write(wm->ac97, reg, val);
}
EXPORT_SYMBOL_GPL(wm97xx_reg_write);
/**
* wm97xx_read_aux_adc - Read the aux adc.
* @wm: wm97xx device.
* @adcsel: codec ADC to be read
*
* Reads the selected AUX ADC.
*/
int wm97xx_read_aux_adc(struct wm97xx *wm, u16 adcsel)
{
int power_adc = 0, auxval;
u16 power = 0;
int rc = 0;
int timeout = 0;
/* get codec */
mutex_lock(&wm->codec_mutex);
/* When the touchscreen is not in use, we may have to power up
* the AUX ADC before we can use sample the AUX inputs->
*/
if (wm->id == WM9713_ID2 &&
(power = wm97xx_reg_read(wm, AC97_EXTENDED_MID)) & 0x8000) {
power_adc = 1;
wm97xx_reg_write(wm, AC97_EXTENDED_MID, power & 0x7fff);
}
/* Prepare the codec for AUX reading */
wm->codec->aux_prepare(wm);
/* Turn polling mode on to read AUX ADC */
wm->pen_probably_down = 1;
while (rc != RC_VALID && timeout++ < 5)
rc = wm->codec->poll_sample(wm, adcsel, &auxval);
if (power_adc)
wm97xx_reg_write(wm, AC97_EXTENDED_MID, power | 0x8000);
wm->codec->dig_restore(wm);
wm->pen_probably_down = 0;
if (timeout >= 5) {
dev_err(wm->dev,
"timeout reading auxadc %d, disabling digitiser\n",
adcsel);
wm->codec->dig_enable(wm, false);
}
mutex_unlock(&wm->codec_mutex);
return (rc == RC_VALID ? auxval & 0xfff : -EBUSY);
}
EXPORT_SYMBOL_GPL(wm97xx_read_aux_adc);
/**
* wm97xx_get_gpio - Get the status of a codec GPIO.
* @wm: wm97xx device.
* @gpio: gpio
*
* Get the status of a codec GPIO pin
*/
enum wm97xx_gpio_status wm97xx_get_gpio(struct wm97xx *wm, u32 gpio)
{
u16 status;
enum wm97xx_gpio_status ret;
mutex_lock(&wm->codec_mutex);
status = wm97xx_reg_read(wm, AC97_GPIO_STATUS);
if (status & gpio)
ret = WM97XX_GPIO_HIGH;
else
ret = WM97XX_GPIO_LOW;
mutex_unlock(&wm->codec_mutex);
return ret;
}
EXPORT_SYMBOL_GPL(wm97xx_get_gpio);
/**
* wm97xx_set_gpio - Set the status of a codec GPIO.
* @wm: wm97xx device.
* @gpio: gpio
* @status: status
*
* Set the status of a codec GPIO pin
*/
void wm97xx_set_gpio(struct wm97xx *wm, u32 gpio,
enum wm97xx_gpio_status status)
{
u16 reg;
mutex_lock(&wm->codec_mutex);
reg = wm97xx_reg_read(wm, AC97_GPIO_STATUS);
if (status == WM97XX_GPIO_HIGH)
reg |= gpio;
else
reg &= ~gpio;
if (wm->id == WM9712_ID2 && wm->variant != WM97xx_WM1613)
wm97xx_reg_write(wm, AC97_GPIO_STATUS, reg << 1);
else
wm97xx_reg_write(wm, AC97_GPIO_STATUS, reg);
mutex_unlock(&wm->codec_mutex);
}
EXPORT_SYMBOL_GPL(wm97xx_set_gpio);
/*
* Codec GPIO pin configuration, this sets pin direction, polarity,
* stickyness and wake up.
*/
void wm97xx_config_gpio(struct wm97xx *wm, u32 gpio, enum wm97xx_gpio_dir dir,
enum wm97xx_gpio_pol pol, enum wm97xx_gpio_sticky sticky,
enum wm97xx_gpio_wake wake)
{
u16 reg;
mutex_lock(&wm->codec_mutex);
reg = wm97xx_reg_read(wm, AC97_GPIO_POLARITY);
if (pol == WM97XX_GPIO_POL_HIGH)
reg |= gpio;
else
reg &= ~gpio;
wm97xx_reg_write(wm, AC97_GPIO_POLARITY, reg);
reg = wm97xx_reg_read(wm, AC97_GPIO_STICKY);
if (sticky == WM97XX_GPIO_STICKY)
reg |= gpio;
else
reg &= ~gpio;
wm97xx_reg_write(wm, AC97_GPIO_STICKY, reg);
reg = wm97xx_reg_read(wm, AC97_GPIO_WAKEUP);
if (wake == WM97XX_GPIO_WAKE)
reg |= gpio;
else
reg &= ~gpio;
wm97xx_reg_write(wm, AC97_GPIO_WAKEUP, reg);
reg = wm97xx_reg_read(wm, AC97_GPIO_CFG);
if (dir == WM97XX_GPIO_IN)
reg |= gpio;
else
reg &= ~gpio;
wm97xx_reg_write(wm, AC97_GPIO_CFG, reg);
mutex_unlock(&wm->codec_mutex);
}
EXPORT_SYMBOL_GPL(wm97xx_config_gpio);
/*
* Configure the WM97XX_PRP value to use while system is suspended.
* If a value other than 0 is set then WM97xx pen detection will be
* left enabled in the configured mode while the system is in suspend,
* the device has users and suspend has not been disabled via the
* wakeup sysfs entries.
*
* @wm: WM97xx device to configure
* @mode: WM97XX_PRP value to configure while suspended
*/
void wm97xx_set_suspend_mode(struct wm97xx *wm, u16 mode)
{
wm->suspend_mode = mode;
device_init_wakeup(&wm->input_dev->dev, mode != 0);
}
EXPORT_SYMBOL_GPL(wm97xx_set_suspend_mode);
/*
* Codec PENDOWN irq handler
*
*/
static irqreturn_t wm97xx_pen_interrupt(int irq, void *dev_id)
{
struct wm97xx *wm = dev_id;
int pen_was_down = wm->pen_is_down;
/* do we need to enable the touch panel reader */
if (wm->id == WM9705_ID2) {
if (wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD) &
WM97XX_PEN_DOWN)
wm->pen_is_down = 1;
else
wm->pen_is_down = 0;
} else {
u16 status, pol;
mutex_lock(&wm->codec_mutex);
status = wm97xx_reg_read(wm, AC97_GPIO_STATUS);
pol = wm97xx_reg_read(wm, AC97_GPIO_POLARITY);
if (WM97XX_GPIO_13 & pol & status) {
wm->pen_is_down = 1;
wm97xx_reg_write(wm, AC97_GPIO_POLARITY, pol &
~WM97XX_GPIO_13);
} else {
wm->pen_is_down = 0;
wm97xx_reg_write(wm, AC97_GPIO_POLARITY, pol |
WM97XX_GPIO_13);
}
if (wm->id == WM9712_ID2 && wm->variant != WM97xx_WM1613)
wm97xx_reg_write(wm, AC97_GPIO_STATUS, (status &
~WM97XX_GPIO_13) << 1);
else
wm97xx_reg_write(wm, AC97_GPIO_STATUS, status &
~WM97XX_GPIO_13);
mutex_unlock(&wm->codec_mutex);
}
/* If the system is not using continuous mode or it provides a
* pen down operation then we need to schedule polls while the
* pen is down. Otherwise the machine driver is responsible
* for scheduling reads.
*/
if (!wm->mach_ops->acc_enabled || wm->mach_ops->acc_pen_down) {
if (wm->pen_is_down && !pen_was_down) {
/* Data is not available immediately on pen down */
queue_delayed_work(wm->ts_workq, &wm->ts_reader, 1);
}
/* Let ts_reader report the pen up for debounce. */
if (!wm->pen_is_down && pen_was_down)
wm->pen_is_down = 1;
}
if (!wm->pen_is_down && wm->mach_ops->acc_enabled)
wm->mach_ops->acc_pen_up(wm);
return IRQ_HANDLED;
}
/*
* initialise pen IRQ handler and workqueue
*/
static int wm97xx_init_pen_irq(struct wm97xx *wm)
{
u16 reg;
if (request_threaded_irq(wm->pen_irq, NULL, wm97xx_pen_interrupt,
IRQF_SHARED | IRQF_ONESHOT,
"wm97xx-pen", wm)) {
dev_err(wm->dev,
"Failed to register pen down interrupt, polling");
wm->pen_irq = 0;
return -EINVAL;
}
/* Configure GPIO as interrupt source on WM971x */
if (wm->id != WM9705_ID2) {
BUG_ON(!wm->mach_ops->irq_gpio);
reg = wm97xx_reg_read(wm, AC97_MISC_AFE);
wm97xx_reg_write(wm, AC97_MISC_AFE,
reg & ~(wm->mach_ops->irq_gpio));
reg = wm97xx_reg_read(wm, 0x5a);
wm97xx_reg_write(wm, 0x5a, reg & ~0x0001);
}
return 0;
}
static int wm97xx_read_samples(struct wm97xx *wm)
{
struct wm97xx_data data;
int rc;
mutex_lock(&wm->codec_mutex);
if (wm->mach_ops && wm->mach_ops->acc_enabled)
rc = wm->mach_ops->acc_pen_down(wm);
else
rc = wm->codec->poll_touch(wm, &data);
if (rc & RC_PENUP) {
if (wm->pen_is_down) {
wm->pen_is_down = 0;
dev_dbg(wm->dev, "pen up\n");
input_report_abs(wm->input_dev, ABS_PRESSURE, 0);
input_report_key(wm->input_dev, BTN_TOUCH, 0);
input_sync(wm->input_dev);
} else if (!(rc & RC_AGAIN)) {
/* We need high frequency updates only while
* pen is down, the user never will be able to
* touch screen faster than a few times per
* second... On the other hand, when the user
* is actively working with the touchscreen we
* don't want to lose the quick response. So we
* will slowly increase sleep time after the
* pen is up and quicky restore it to ~one task
* switch when pen is down again.
*/
if (wm->ts_reader_interval < HZ / 10)
wm->ts_reader_interval++;
}
} else if (rc & RC_VALID) {
dev_dbg(wm->dev,
"pen down: x=%x:%d, y=%x:%d, pressure=%x:%d\n",
data.x >> 12, data.x & 0xfff, data.y >> 12,
data.y & 0xfff, data.p >> 12, data.p & 0xfff);
if (abs_x[0] > (data.x & 0xfff) ||
abs_x[1] < (data.x & 0xfff) ||
abs_y[0] > (data.y & 0xfff) ||
abs_y[1] < (data.y & 0xfff)) {
dev_dbg(wm->dev, "Measurement out of range, dropping it\n");
rc = RC_AGAIN;
goto out;
}
input_report_abs(wm->input_dev, ABS_X, data.x & 0xfff);
input_report_abs(wm->input_dev, ABS_Y, data.y & 0xfff);
input_report_abs(wm->input_dev, ABS_PRESSURE, data.p & 0xfff);
input_report_key(wm->input_dev, BTN_TOUCH, 1);
input_sync(wm->input_dev);
wm->pen_is_down = 1;
wm->ts_reader_interval = wm->ts_reader_min_interval;
} else if (rc & RC_PENDOWN) {
dev_dbg(wm->dev, "pen down\n");
wm->pen_is_down = 1;
wm->ts_reader_interval = wm->ts_reader_min_interval;
}
out:
mutex_unlock(&wm->codec_mutex);
return rc;
}
/*
* The touchscreen sample reader.
*/
static void wm97xx_ts_reader(struct work_struct *work)
{
int rc;
struct wm97xx *wm = container_of(work, struct wm97xx, ts_reader.work);
BUG_ON(!wm->codec);
do {
rc = wm97xx_read_samples(wm);
} while (rc & RC_AGAIN);
if (wm->pen_is_down || !wm->pen_irq)
queue_delayed_work(wm->ts_workq, &wm->ts_reader,
wm->ts_reader_interval);
}
/**
* wm97xx_ts_input_open - Open the touch screen input device.
* @idev: Input device to be opened.
*
* Called by the input sub system to open a wm97xx touchscreen device.
* Starts the touchscreen thread and touch digitiser.
*/
static int wm97xx_ts_input_open(struct input_dev *idev)
{
struct wm97xx *wm = input_get_drvdata(idev);
wm->ts_workq = alloc_ordered_workqueue("kwm97xx", 0);
if (wm->ts_workq == NULL) {
dev_err(wm->dev,
"Failed to create workqueue\n");
return -EINVAL;
}
/* start digitiser */
if (wm->mach_ops && wm->mach_ops->acc_enabled)
wm->codec->acc_enable(wm, 1);
wm->codec->dig_enable(wm, 1);
INIT_DELAYED_WORK(&wm->ts_reader, wm97xx_ts_reader);
wm->ts_reader_min_interval = HZ >= 100 ? HZ / 100 : 1;
if (wm->ts_reader_min_interval < 1)
wm->ts_reader_min_interval = 1;
wm->ts_reader_interval = wm->ts_reader_min_interval;
wm->pen_is_down = 0;
if (wm->pen_irq)
wm97xx_init_pen_irq(wm);
else
dev_err(wm->dev, "No IRQ specified\n");
/* If we either don't have an interrupt for pen down events or
* failed to acquire it then we need to poll.
*/
if (wm->pen_irq == 0)
queue_delayed_work(wm->ts_workq, &wm->ts_reader,
wm->ts_reader_interval);
return 0;
}
/**
* wm97xx_ts_input_close - Close the touch screen input device.
* @idev: Input device to be closed.
*
* Called by the input sub system to close a wm97xx touchscreen
* device. Kills the touchscreen thread and stops the touch
* digitiser.
*/
static void wm97xx_ts_input_close(struct input_dev *idev)
{
struct wm97xx *wm = input_get_drvdata(idev);
u16 reg;
if (wm->pen_irq) {
/* Return the interrupt to GPIO usage (disabling it) */
if (wm->id != WM9705_ID2) {
BUG_ON(!wm->mach_ops->irq_gpio);
reg = wm97xx_reg_read(wm, AC97_MISC_AFE);
wm97xx_reg_write(wm, AC97_MISC_AFE,
reg | wm->mach_ops->irq_gpio);
}
free_irq(wm->pen_irq, wm);
}
wm->pen_is_down = 0;
/* ts_reader rearms itself so we need to explicitly stop it
* before we destroy the workqueue.
*/
cancel_delayed_work_sync(&wm->ts_reader);
destroy_workqueue(wm->ts_workq);
/* stop digitiser */
wm->codec->dig_enable(wm, 0);
if (wm->mach_ops && wm->mach_ops->acc_enabled)
wm->codec->acc_enable(wm, 0);
}
static int wm97xx_register_touch(struct wm97xx *wm)
{
struct wm97xx_pdata *pdata = dev_get_platdata(wm->dev);
int ret;
wm->input_dev = devm_input_allocate_device(wm->dev);
if (wm->input_dev == NULL)
return -ENOMEM;
/* set up touch configuration */
wm->input_dev->name = "wm97xx touchscreen";
wm->input_dev->phys = "wm97xx";
wm->input_dev->open = wm97xx_ts_input_open;
wm->input_dev->close = wm97xx_ts_input_close;
__set_bit(EV_ABS, wm->input_dev->evbit);
__set_bit(EV_KEY, wm->input_dev->evbit);
__set_bit(BTN_TOUCH, wm->input_dev->keybit);
input_set_abs_params(wm->input_dev, ABS_X, abs_x[0], abs_x[1],
abs_x[2], 0);
input_set_abs_params(wm->input_dev, ABS_Y, abs_y[0], abs_y[1],
abs_y[2], 0);
input_set_abs_params(wm->input_dev, ABS_PRESSURE, abs_p[0], abs_p[1],
abs_p[2], 0);
input_set_drvdata(wm->input_dev, wm);
wm->input_dev->dev.parent = wm->dev;
ret = input_register_device(wm->input_dev);
if (ret)
return ret;
/*
* register our extended touch device (for machine specific
* extensions)
*/
wm->touch_dev = platform_device_alloc("wm97xx-touch", -1);
if (!wm->touch_dev)
return -ENOMEM;
platform_set_drvdata(wm->touch_dev, wm);
wm->touch_dev->dev.parent = wm->dev;
wm->touch_dev->dev.platform_data = pdata;
ret = platform_device_add(wm->touch_dev);
if (ret < 0)
goto touch_reg_err;
return 0;
touch_reg_err:
platform_device_put(wm->touch_dev);
return ret;
}
static void wm97xx_unregister_touch(struct wm97xx *wm)
{
platform_device_unregister(wm->touch_dev);
}
static int _wm97xx_probe(struct wm97xx *wm)
{
int id = 0;
mutex_init(&wm->codec_mutex);
dev_set_drvdata(wm->dev, wm);
/* check that we have a supported codec */
id = wm97xx_reg_read(wm, AC97_VENDOR_ID1);
if (id != WM97XX_ID1) {
dev_err(wm->dev,
"Device with vendor %04x is not a wm97xx\n", id);
return -ENODEV;
}
wm->id = wm97xx_reg_read(wm, AC97_VENDOR_ID2);
wm->variant = WM97xx_GENERIC;
dev_info(wm->dev, "detected a wm97%02x codec\n", wm->id & 0xff);
switch (wm->id & 0xff) {
#ifdef CONFIG_TOUCHSCREEN_WM9705
case 0x05:
wm->codec = &wm9705_codec;
break;
#endif
#ifdef CONFIG_TOUCHSCREEN_WM9712
case 0x12:
wm->codec = &wm9712_codec;
break;
#endif
#ifdef CONFIG_TOUCHSCREEN_WM9713
case 0x13:
wm->codec = &wm9713_codec;
break;
#endif
default:
dev_err(wm->dev, "Support for wm97%02x not compiled in.\n",
wm->id & 0xff);
return -ENODEV;
}
/* set up physical characteristics */
wm->codec->phy_init(wm);
/* load gpio cache */
wm->gpio[0] = wm97xx_reg_read(wm, AC97_GPIO_CFG);
wm->gpio[1] = wm97xx_reg_read(wm, AC97_GPIO_POLARITY);
wm->gpio[2] = wm97xx_reg_read(wm, AC97_GPIO_STICKY);
wm->gpio[3] = wm97xx_reg_read(wm, AC97_GPIO_WAKEUP);
wm->gpio[4] = wm97xx_reg_read(wm, AC97_GPIO_STATUS);
wm->gpio[5] = wm97xx_reg_read(wm, AC97_MISC_AFE);
return wm97xx_register_touch(wm);
}
static void wm97xx_remove_battery(struct wm97xx *wm)
{
platform_device_unregister(wm->battery_dev);
}
static int wm97xx_add_battery(struct wm97xx *wm,
struct wm97xx_batt_pdata *pdata)
{
int ret;
wm->battery_dev = platform_device_alloc("wm97xx-battery", -1);
if (!wm->battery_dev)
return -ENOMEM;
platform_set_drvdata(wm->battery_dev, wm);
wm->battery_dev->dev.parent = wm->dev;
wm->battery_dev->dev.platform_data = pdata;
ret = platform_device_add(wm->battery_dev);
if (ret)
platform_device_put(wm->battery_dev);
return ret;
}
static int wm97xx_probe(struct device *dev)
{
struct wm97xx *wm;
int ret;
struct wm97xx_pdata *pdata = dev_get_platdata(dev);
wm = devm_kzalloc(dev, sizeof(struct wm97xx), GFP_KERNEL);
if (!wm)
return -ENOMEM;
wm->dev = dev;
wm->ac97 = to_ac97_t(dev);
ret = _wm97xx_probe(wm);
if (ret)
return ret;
ret = wm97xx_add_battery(wm, pdata ? pdata->batt_pdata : NULL);
if (ret < 0)
goto batt_err;
return ret;
batt_err:
wm97xx_unregister_touch(wm);
return ret;
}
static int wm97xx_remove(struct device *dev)
{
struct wm97xx *wm = dev_get_drvdata(dev);
wm97xx_remove_battery(wm);
wm97xx_unregister_touch(wm);
return 0;
}
static int wm97xx_mfd_probe(struct platform_device *pdev)
{
struct wm97xx *wm;
struct wm97xx_platform_data *mfd_pdata = dev_get_platdata(&pdev->dev);
int ret;
wm = devm_kzalloc(&pdev->dev, sizeof(struct wm97xx), GFP_KERNEL);
if (!wm)
return -ENOMEM;
wm->dev = &pdev->dev;
wm->ac97 = mfd_pdata->ac97;
ret = _wm97xx_probe(wm);
if (ret)
return ret;
ret = wm97xx_add_battery(wm, mfd_pdata->batt_pdata);
if (ret < 0)
goto batt_err;
return ret;
batt_err:
wm97xx_unregister_touch(wm);
return ret;
}
static void wm97xx_mfd_remove(struct platform_device *pdev)
{
wm97xx_remove(&pdev->dev);
}
static int wm97xx_suspend(struct device *dev)
{
struct wm97xx *wm = dev_get_drvdata(dev);
u16 reg;
int suspend_mode;
if (device_may_wakeup(&wm->input_dev->dev))
suspend_mode = wm->suspend_mode;
else
suspend_mode = 0;
mutex_lock(&wm->input_dev->mutex);
if (input_device_enabled(wm->input_dev))
cancel_delayed_work_sync(&wm->ts_reader);
/* Power down the digitiser (bypassing the cache for resume) */
reg = wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER2);
reg &= ~WM97XX_PRP_DET_DIG;
if (input_device_enabled(wm->input_dev))
reg |= suspend_mode;
wm->ac97->bus->ops->write(wm->ac97, AC97_WM97XX_DIGITISER2, reg);
/* WM9713 has an additional power bit - turn it off if there
* are no users or if suspend mode is zero. */
if (wm->id == WM9713_ID2 &&
(!input_device_enabled(wm->input_dev) || !suspend_mode)) {
reg = wm97xx_reg_read(wm, AC97_EXTENDED_MID) | 0x8000;
wm97xx_reg_write(wm, AC97_EXTENDED_MID, reg);
}
mutex_unlock(&wm->input_dev->mutex);
return 0;
}
static int wm97xx_resume(struct device *dev)
{
struct wm97xx *wm = dev_get_drvdata(dev);
mutex_lock(&wm->input_dev->mutex);
/* restore digitiser and gpios */
if (wm->id == WM9713_ID2) {
wm97xx_reg_write(wm, AC97_WM9713_DIG1, wm->dig[0]);
wm97xx_reg_write(wm, 0x5a, wm->misc);
if (input_device_enabled(wm->input_dev)) {
u16 reg;
reg = wm97xx_reg_read(wm, AC97_EXTENDED_MID) & 0x7fff;
wm97xx_reg_write(wm, AC97_EXTENDED_MID, reg);
}
}
wm97xx_reg_write(wm, AC97_WM9713_DIG2, wm->dig[1]);
wm97xx_reg_write(wm, AC97_WM9713_DIG3, wm->dig[2]);
wm97xx_reg_write(wm, AC97_GPIO_CFG, wm->gpio[0]);
wm97xx_reg_write(wm, AC97_GPIO_POLARITY, wm->gpio[1]);
wm97xx_reg_write(wm, AC97_GPIO_STICKY, wm->gpio[2]);
wm97xx_reg_write(wm, AC97_GPIO_WAKEUP, wm->gpio[3]);
wm97xx_reg_write(wm, AC97_GPIO_STATUS, wm->gpio[4]);
wm97xx_reg_write(wm, AC97_MISC_AFE, wm->gpio[5]);
if (input_device_enabled(wm->input_dev) && !wm->pen_irq) {
wm->ts_reader_interval = wm->ts_reader_min_interval;
queue_delayed_work(wm->ts_workq, &wm->ts_reader,
wm->ts_reader_interval);
}
mutex_unlock(&wm->input_dev->mutex);
return 0;
}
static DEFINE_SIMPLE_DEV_PM_OPS(wm97xx_pm_ops, wm97xx_suspend, wm97xx_resume);
/*
* Machine specific operations
*/
int wm97xx_register_mach_ops(struct wm97xx *wm,
struct wm97xx_mach_ops *mach_ops)
{
mutex_lock(&wm->codec_mutex);
if (wm->mach_ops) {
mutex_unlock(&wm->codec_mutex);
return -EINVAL;
}
wm->mach_ops = mach_ops;
mutex_unlock(&wm->codec_mutex);
return 0;
}
EXPORT_SYMBOL_GPL(wm97xx_register_mach_ops);
void wm97xx_unregister_mach_ops(struct wm97xx *wm)
{
mutex_lock(&wm->codec_mutex);
wm->mach_ops = NULL;
mutex_unlock(&wm->codec_mutex);
}
EXPORT_SYMBOL_GPL(wm97xx_unregister_mach_ops);
static struct device_driver wm97xx_driver = {
.name = "wm97xx-ts",
#ifdef CONFIG_AC97_BUS
.bus = &ac97_bus_type,
#endif
.owner = THIS_MODULE,
.probe = wm97xx_probe,
.remove = wm97xx_remove,
.pm = pm_sleep_ptr(&wm97xx_pm_ops),
};
static struct platform_driver wm97xx_mfd_driver = {
.driver = {
.name = "wm97xx-ts",
.pm = pm_sleep_ptr(&wm97xx_pm_ops),
},
.probe = wm97xx_mfd_probe,
.remove_new = wm97xx_mfd_remove,
};
static int __init wm97xx_init(void)
{
int ret;
ret = platform_driver_register(&wm97xx_mfd_driver);
if (ret)
return ret;
if (IS_BUILTIN(CONFIG_AC97_BUS))
ret = driver_register(&wm97xx_driver);
return ret;
}
static void __exit wm97xx_exit(void)
{
if (IS_BUILTIN(CONFIG_AC97_BUS))
driver_unregister(&wm97xx_driver);
platform_driver_unregister(&wm97xx_mfd_driver);
}
module_init(wm97xx_init);
module_exit(wm97xx_exit);
/* Module information */
MODULE_AUTHOR("Liam Girdwood <[email protected]>");
MODULE_DESCRIPTION("WM97xx Core - Touch Screen / AUX ADC / GPIO Driver");
MODULE_LICENSE("GPL");
Codebase Browser
linux