// SPDX-License-Identifier: GPL-2.0
/*
* Xilinx ZynqMP OCM ECC Driver
*
* Copyright (C) 2022 Advanced Micro Devices, Inc.
*/
#include <linux/edac.h>
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_platform.h>
#include <linux/platform_device.h>
#include "edac_module.h"
#define ZYNQMP_OCM_EDAC_MSG_SIZE 256
#define ZYNQMP_OCM_EDAC_STRING "zynqmp_ocm"
/* Error/Interrupt registers */
#define ERR_CTRL_OFST 0x0
#define OCM_ISR_OFST 0x04
#define OCM_IMR_OFST 0x08
#define OCM_IEN_OFST 0x0C
#define OCM_IDS_OFST 0x10
/* ECC control register */
#define ECC_CTRL_OFST 0x14
/* Correctable error info registers */
#define CE_FFA_OFST 0x1C
#define CE_FFD0_OFST 0x20
#define CE_FFD1_OFST 0x24
#define CE_FFD2_OFST 0x28
#define CE_FFD3_OFST 0x2C
#define CE_FFE_OFST 0x30
/* Uncorrectable error info registers */
#define UE_FFA_OFST 0x34
#define UE_FFD0_OFST 0x38
#define UE_FFD1_OFST 0x3C
#define UE_FFD2_OFST 0x40
#define UE_FFD3_OFST 0x44
#define UE_FFE_OFST 0x48
/* ECC control register bit field definitions */
#define ECC_CTRL_CLR_CE_ERR 0x40
#define ECC_CTRL_CLR_UE_ERR 0x80
/* Fault injection data and count registers */
#define OCM_FID0_OFST 0x4C
#define OCM_FID1_OFST 0x50
#define OCM_FID2_OFST 0x54
#define OCM_FID3_OFST 0x58
#define OCM_FIC_OFST 0x74
#define UE_MAX_BITPOS_LOWER 31
#define UE_MIN_BITPOS_UPPER 32
#define UE_MAX_BITPOS_UPPER 63
/* Interrupt masks */
#define OCM_CEINTR_MASK BIT(6)
#define OCM_UEINTR_MASK BIT(7)
#define OCM_ECC_ENABLE_MASK BIT(0)
#define OCM_FICOUNT_MASK GENMASK(23, 0)
#define OCM_NUM_UE_BITPOS 2
#define OCM_BASEVAL 0xFFFC0000
#define EDAC_DEVICE "ZynqMP-OCM"
/**
* struct ecc_error_info - ECC error log information
* @addr: Fault generated at this address
* @fault_lo: Generated fault data (lower 32-bit)
* @fault_hi: Generated fault data (upper 32-bit)
*/
struct ecc_error_info {
u32 addr;
u32 fault_lo;
u32 fault_hi;
};
/**
* struct ecc_status - ECC status information to report
* @ce_cnt: Correctable error count
* @ue_cnt: Uncorrectable error count
* @ceinfo: Correctable error log information
* @ueinfo: Uncorrectable error log information
*/
struct ecc_status {
u32 ce_cnt;
u32 ue_cnt;
struct ecc_error_info ceinfo;
struct ecc_error_info ueinfo;
};
/**
* struct edac_priv - OCM private instance data
* @baseaddr: Base address of the OCM
* @message: Buffer for framing the event specific info
* @stat: ECC status information
* @ce_cnt: Correctable Error count
* @ue_cnt: Uncorrectable Error count
* @debugfs_dir: Directory entry for debugfs
* @ce_bitpos: Bit position for Correctable Error
* @ue_bitpos: Array to store UnCorrectable Error bit positions
* @fault_injection_cnt: Fault Injection Counter value
*/
struct edac_priv {
void __iomem *baseaddr;
char message[ZYNQMP_OCM_EDAC_MSG_SIZE];
struct ecc_status stat;
u32 ce_cnt;
u32 ue_cnt;
#ifdef CONFIG_EDAC_DEBUG
struct dentry *debugfs_dir;
u8 ce_bitpos;
u8 ue_bitpos[OCM_NUM_UE_BITPOS];
u32 fault_injection_cnt;
#endif
};
/**
* get_error_info - Get the current ECC error info
* @base: Pointer to the base address of the OCM
* @p: Pointer to the OCM ECC status structure
* @mask: Status register mask value
*
* Determines there is any ECC error or not
*
*/
static void get_error_info(void __iomem *base, struct ecc_status *p, int mask)
{
if (mask & OCM_CEINTR_MASK) {
p->ce_cnt++;
p->ceinfo.fault_lo = readl(base + CE_FFD0_OFST);
p->ceinfo.fault_hi = readl(base + CE_FFD1_OFST);
p->ceinfo.addr = (OCM_BASEVAL | readl(base + CE_FFA_OFST));
writel(ECC_CTRL_CLR_CE_ERR, base + OCM_ISR_OFST);
} else if (mask & OCM_UEINTR_MASK) {
p->ue_cnt++;
p->ueinfo.fault_lo = readl(base + UE_FFD0_OFST);
p->ueinfo.fault_hi = readl(base + UE_FFD1_OFST);
p->ueinfo.addr = (OCM_BASEVAL | readl(base + UE_FFA_OFST));
writel(ECC_CTRL_CLR_UE_ERR, base + OCM_ISR_OFST);
}
}
/**
* handle_error - Handle error types CE and UE
* @dci: Pointer to the EDAC device instance
* @p: Pointer to the OCM ECC status structure
*
* Handles correctable and uncorrectable errors.
*/
static void handle_error(struct edac_device_ctl_info *dci, struct ecc_status *p)
{
struct edac_priv *priv = dci->pvt_info;
struct ecc_error_info *pinf;
if (p->ce_cnt) {
pinf = &p->ceinfo;
snprintf(priv->message, ZYNQMP_OCM_EDAC_MSG_SIZE,
"\nOCM ECC error type :%s\nAddr: [0x%x]\nFault Data[0x%08x%08x]",
"CE", pinf->addr, pinf->fault_hi, pinf->fault_lo);
edac_device_handle_ce(dci, 0, 0, priv->message);
}
if (p->ue_cnt) {
pinf = &p->ueinfo;
snprintf(priv->message, ZYNQMP_OCM_EDAC_MSG_SIZE,
"\nOCM ECC error type :%s\nAddr: [0x%x]\nFault Data[0x%08x%08x]",
"UE", pinf->addr, pinf->fault_hi, pinf->fault_lo);
edac_device_handle_ue(dci, 0, 0, priv->message);
}
memset(p, 0, sizeof(*p));
}
/**
* intr_handler - ISR routine
* @irq: irq number
* @dev_id: device id pointer
*
* Return: IRQ_NONE, if CE/UE interrupt not set or IRQ_HANDLED otherwise
*/
static irqreturn_t intr_handler(int irq, void *dev_id)
{
struct edac_device_ctl_info *dci = dev_id;
struct edac_priv *priv = dci->pvt_info;
int regval;
regval = readl(priv->baseaddr + OCM_ISR_OFST);
if (!(regval & (OCM_CEINTR_MASK | OCM_UEINTR_MASK))) {
WARN_ONCE(1, "Unhandled IRQ%d, ISR: 0x%x", irq, regval);
return IRQ_NONE;
}
get_error_info(priv->baseaddr, &priv->stat, regval);
priv->ce_cnt += priv->stat.ce_cnt;
priv->ue_cnt += priv->stat.ue_cnt;
handle_error(dci, &priv->stat);
return IRQ_HANDLED;
}
/**
* get_eccstate - Return the ECC status
* @base: Pointer to the OCM base address
*
* Get the ECC enable/disable status
*
* Return: ECC status 0/1.
*/
static bool get_eccstate(void __iomem *base)
{
return readl(base + ECC_CTRL_OFST) & OCM_ECC_ENABLE_MASK;
}
#ifdef CONFIG_EDAC_DEBUG
/**
* write_fault_count - write fault injection count
* @priv: Pointer to the EDAC private struct
*
* Update the fault injection count register, once the counter reaches
* zero, it injects errors
*/
static void write_fault_count(struct edac_priv *priv)
{
u32 ficount = priv->fault_injection_cnt;
if (ficount & ~OCM_FICOUNT_MASK) {
ficount &= OCM_FICOUNT_MASK;
edac_printk(KERN_INFO, EDAC_DEVICE,
"Fault injection count value truncated to %d\n", ficount);
}
writel(ficount, priv->baseaddr + OCM_FIC_OFST);
}
/*
* To get the Correctable Error injected, the following steps are needed:
* - Setup the optional Fault Injection Count:
* echo <fault_count val> > /sys/kernel/debug/edac/ocm/inject_fault_count
* - Write the Correctable Error bit position value:
* echo <bit_pos val> > /sys/kernel/debug/edac/ocm/inject_ce_bitpos
*/
static ssize_t inject_ce_write(struct file *file, const char __user *data,
size_t count, loff_t *ppos)
{
struct edac_device_ctl_info *edac_dev = file->private_data;
struct edac_priv *priv = edac_dev->pvt_info;
int ret;
if (!data)
return -EFAULT;
ret = kstrtou8_from_user(data, count, 0, &priv->ce_bitpos);
if (ret)
return ret;
if (priv->ce_bitpos > UE_MAX_BITPOS_UPPER)
return -EINVAL;
if (priv->ce_bitpos <= UE_MAX_BITPOS_LOWER) {
writel(BIT(priv->ce_bitpos), priv->baseaddr + OCM_FID0_OFST);
writel(0, priv->baseaddr + OCM_FID1_OFST);
} else {
writel(BIT(priv->ce_bitpos - UE_MIN_BITPOS_UPPER),
priv->baseaddr + OCM_FID1_OFST);
writel(0, priv->baseaddr + OCM_FID0_OFST);
}
write_fault_count(priv);
return count;
}
static const struct file_operations inject_ce_fops = {
.open = simple_open,
.write = inject_ce_write,
.llseek = generic_file_llseek,
};
/*
* To get the Uncorrectable Error injected, the following steps are needed:
* - Setup the optional Fault Injection Count:
* echo <fault_count val> > /sys/kernel/debug/edac/ocm/inject_fault_count
* - Write the Uncorrectable Error bit position values:
* echo <bit_pos0 val>,<bit_pos1 val> > /sys/kernel/debug/edac/ocm/inject_ue_bitpos
*/
static ssize_t inject_ue_write(struct file *file, const char __user *data,
size_t count, loff_t *ppos)
{
struct edac_device_ctl_info *edac_dev = file->private_data;
struct edac_priv *priv = edac_dev->pvt_info;
char buf[6], *pbuf, *token[2];
u64 ue_bitpos;
int i, ret;
u8 len;
if (!data)
return -EFAULT;
len = min_t(size_t, count, sizeof(buf));
if (copy_from_user(buf, data, len))
return -EFAULT;
buf[len] = '\0';
pbuf = &buf[0];
for (i = 0; i < OCM_NUM_UE_BITPOS; i++)
token[i] = strsep(&pbuf, ",");
ret = kstrtou8(token[0], 0, &priv->ue_bitpos[0]);
if (ret)
return ret;
ret = kstrtou8(token[1], 0, &priv->ue_bitpos[1]);
if (ret)
return ret;
if (priv->ue_bitpos[0] > UE_MAX_BITPOS_UPPER ||
priv->ue_bitpos[1] > UE_MAX_BITPOS_UPPER)
return -EINVAL;
if (priv->ue_bitpos[0] == priv->ue_bitpos[1]) {
edac_printk(KERN_ERR, EDAC_DEVICE, "Bit positions should not be equal\n");
return -EINVAL;
}
ue_bitpos = BIT(priv->ue_bitpos[0]) | BIT(priv->ue_bitpos[1]);
writel((u32)ue_bitpos, priv->baseaddr + OCM_FID0_OFST);
writel((u32)(ue_bitpos >> 32), priv->baseaddr + OCM_FID1_OFST);
write_fault_count(priv);
return count;
}
static const struct file_operations inject_ue_fops = {
.open = simple_open,
.write = inject_ue_write,
.llseek = generic_file_llseek,
};
static void setup_debugfs(struct edac_device_ctl_info *edac_dev)
{
struct edac_priv *priv = edac_dev->pvt_info;
priv->debugfs_dir = edac_debugfs_create_dir("ocm");
if (!priv->debugfs_dir)
return;
edac_debugfs_create_x32("inject_fault_count", 0644, priv->debugfs_dir,
&priv->fault_injection_cnt);
edac_debugfs_create_file("inject_ue_bitpos", 0644, priv->debugfs_dir,
edac_dev, &inject_ue_fops);
edac_debugfs_create_file("inject_ce_bitpos", 0644, priv->debugfs_dir,
edac_dev, &inject_ce_fops);
}
#endif
static int edac_probe(struct platform_device *pdev)
{
struct edac_device_ctl_info *dci;
struct edac_priv *priv;
void __iomem *baseaddr;
struct resource *res;
int irq, ret;
baseaddr = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
if (IS_ERR(baseaddr))
return PTR_ERR(baseaddr);
if (!get_eccstate(baseaddr)) {
edac_printk(KERN_INFO, EDAC_DEVICE, "ECC not enabled\n");
return -ENXIO;
}
dci = edac_device_alloc_ctl_info(sizeof(*priv), ZYNQMP_OCM_EDAC_STRING,
1, ZYNQMP_OCM_EDAC_STRING, 1, 0,
edac_device_alloc_index());
if (!dci)
return -ENOMEM;
priv = dci->pvt_info;
platform_set_drvdata(pdev, dci);
dci->dev = &pdev->dev;
priv->baseaddr = baseaddr;
dci->mod_name = pdev->dev.driver->name;
dci->ctl_name = ZYNQMP_OCM_EDAC_STRING;
dci->dev_name = dev_name(&pdev->dev);
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
ret = irq;
goto free_dev_ctl;
}
ret = devm_request_irq(&pdev->dev, irq, intr_handler, 0,
dev_name(&pdev->dev), dci);
if (ret) {
edac_printk(KERN_ERR, EDAC_DEVICE, "Failed to request Irq\n");
goto free_dev_ctl;
}
/* Enable UE, CE interrupts */
writel((OCM_CEINTR_MASK | OCM_UEINTR_MASK), priv->baseaddr + OCM_IEN_OFST);
#ifdef CONFIG_EDAC_DEBUG
setup_debugfs(dci);
#endif
ret = edac_device_add_device(dci);
if (ret)
goto free_dev_ctl;
return 0;
free_dev_ctl:
edac_device_free_ctl_info(dci);
return ret;
}
static void edac_remove(struct platform_device *pdev)
{
struct edac_device_ctl_info *dci = platform_get_drvdata(pdev);
struct edac_priv *priv = dci->pvt_info;
/* Disable UE, CE interrupts */
writel((OCM_CEINTR_MASK | OCM_UEINTR_MASK), priv->baseaddr + OCM_IDS_OFST);
#ifdef CONFIG_EDAC_DEBUG
debugfs_remove_recursive(priv->debugfs_dir);
#endif
edac_device_del_device(&pdev->dev);
edac_device_free_ctl_info(dci);
}
static const struct of_device_id zynqmp_ocm_edac_match[] = {
{ .compatible = "xlnx,zynqmp-ocmc-1.0"},
{ /* end of table */ }
};
MODULE_DEVICE_TABLE(of, zynqmp_ocm_edac_match);
static struct platform_driver zynqmp_ocm_edac_driver = {
.driver = {
.name = "zynqmp-ocm-edac",
.of_match_table = zynqmp_ocm_edac_match,
},
.probe = edac_probe,
.remove_new = edac_remove,
};
module_platform_driver(zynqmp_ocm_edac_driver);
MODULE_AUTHOR("Advanced Micro Devices, Inc");
MODULE_DESCRIPTION("Xilinx ZynqMP OCM ECC driver");
MODULE_LICENSE("GPL");
Codebase Browser
linux