// SPDX-License-Identifier: GPL-2.0+
/*
* adl_pci9111.c
* Hardware driver for PCI9111 ADLink cards: PCI-9111HR
* Copyright (C) 2002-2005 Emmanuel Pacaud <[email protected]>
*/
/*
* Driver: adl_pci9111
* Description: Adlink PCI-9111HR
* Devices: [ADLink] PCI-9111HR (adl_pci9111)
* Author: Emmanuel Pacaud <[email protected]>
* Status: experimental
*
* Configuration options: not applicable, uses PCI auto config
*
* Supports:
* - ai_insn read
* - ao_insn read/write
* - di_insn read
* - do_insn read/write
* - ai_do_cmd mode with the following sources:
* - start_src TRIG_NOW
* - scan_begin_src TRIG_FOLLOW TRIG_TIMER TRIG_EXT
* - convert_src TRIG_TIMER TRIG_EXT
* - scan_end_src TRIG_COUNT
* - stop_src TRIG_COUNT TRIG_NONE
*
* The scanned channels must be consecutive and start from 0. They must
* all have the same range and aref.
*/
/*
* TODO:
* - Really test implemented functionality.
* - Add support for the PCI-9111DG with a probe routine to identify
* the card type (perhaps with the help of the channel number readback
* of the A/D Data register).
* - Add external multiplexer support.
*/
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/comedi/comedi_pci.h>
#include <linux/comedi/comedi_8254.h>
#include "plx9052.h"
#define PCI9111_FIFO_HALF_SIZE 512
#define PCI9111_AI_ACQUISITION_PERIOD_MIN_NS 10000
#define PCI9111_RANGE_SETTING_DELAY 10
#define PCI9111_AI_INSTANT_READ_UDELAY_US 2
/*
* IO address map and bit defines
*/
#define PCI9111_AI_FIFO_REG 0x00
#define PCI9111_AO_REG 0x00
#define PCI9111_DIO_REG 0x02
#define PCI9111_EDIO_REG 0x04
#define PCI9111_AI_CHANNEL_REG 0x06
#define PCI9111_AI_RANGE_STAT_REG 0x08
#define PCI9111_AI_STAT_AD_BUSY BIT(7)
#define PCI9111_AI_STAT_FF_FF BIT(6)
#define PCI9111_AI_STAT_FF_HF BIT(5)
#define PCI9111_AI_STAT_FF_EF BIT(4)
#define PCI9111_AI_RANGE(x) (((x) & 0x7) << 0)
#define PCI9111_AI_RANGE_MASK PCI9111_AI_RANGE(7)
#define PCI9111_AI_TRIG_CTRL_REG 0x0a
#define PCI9111_AI_TRIG_CTRL_TRGEVENT BIT(5)
#define PCI9111_AI_TRIG_CTRL_POTRG BIT(4)
#define PCI9111_AI_TRIG_CTRL_PTRG BIT(3)
#define PCI9111_AI_TRIG_CTRL_ETIS BIT(2)
#define PCI9111_AI_TRIG_CTRL_TPST BIT(1)
#define PCI9111_AI_TRIG_CTRL_ASCAN BIT(0)
#define PCI9111_INT_CTRL_REG 0x0c
#define PCI9111_INT_CTRL_ISC2 BIT(3)
#define PCI9111_INT_CTRL_FFEN BIT(2)
#define PCI9111_INT_CTRL_ISC1 BIT(1)
#define PCI9111_INT_CTRL_ISC0 BIT(0)
#define PCI9111_SOFT_TRIG_REG 0x0e
#define PCI9111_8254_BASE_REG 0x40
#define PCI9111_INT_CLR_REG 0x48
/* PLX 9052 Local Interrupt 1 enabled and active */
#define PCI9111_LI1_ACTIVE (PLX9052_INTCSR_LI1ENAB | \
PLX9052_INTCSR_LI1STAT)
/* PLX 9052 Local Interrupt 2 enabled and active */
#define PCI9111_LI2_ACTIVE (PLX9052_INTCSR_LI2ENAB | \
PLX9052_INTCSR_LI2STAT)
static const struct comedi_lrange pci9111_ai_range = {
5, {
BIP_RANGE(10),
BIP_RANGE(5),
BIP_RANGE(2.5),
BIP_RANGE(1.25),
BIP_RANGE(0.625)
}
};
struct pci9111_private_data {
unsigned long lcr_io_base;
unsigned int scan_delay;
unsigned int chunk_counter;
unsigned int chunk_num_samples;
unsigned short ai_bounce_buffer[2 * PCI9111_FIFO_HALF_SIZE];
};
static void plx9050_interrupt_control(unsigned long io_base,
bool int1_enable,
bool int1_active_high,
bool int2_enable,
bool int2_active_high,
bool interrupt_enable)
{
int flags = 0;
if (int1_enable)
flags |= PLX9052_INTCSR_LI1ENAB;
if (int1_active_high)
flags |= PLX9052_INTCSR_LI1POL;
if (int2_enable)
flags |= PLX9052_INTCSR_LI2ENAB;
if (int2_active_high)
flags |= PLX9052_INTCSR_LI2POL;
if (interrupt_enable)
flags |= PLX9052_INTCSR_PCIENAB;
outb(flags, io_base + PLX9052_INTCSR);
}
enum pci9111_ISC0_sources {
irq_on_eoc,
irq_on_fifo_half_full
};
enum pci9111_ISC1_sources {
irq_on_timer_tick,
irq_on_external_trigger
};
static void pci9111_interrupt_source_set(struct comedi_device *dev,
enum pci9111_ISC0_sources irq_0_source,
enum pci9111_ISC1_sources irq_1_source)
{
int flags;
/* Read the current interrupt control bits */
flags = inb(dev->iobase + PCI9111_AI_TRIG_CTRL_REG);
/* Shift the bits so they are compatible with the write register */
flags >>= 4;
/* Mask off the ISCx bits */
flags &= 0xc0;
/* Now set the new ISCx bits */
if (irq_0_source == irq_on_fifo_half_full)
flags |= PCI9111_INT_CTRL_ISC0;
if (irq_1_source == irq_on_external_trigger)
flags |= PCI9111_INT_CTRL_ISC1;
outb(flags, dev->iobase + PCI9111_INT_CTRL_REG);
}
static void pci9111_fifo_reset(struct comedi_device *dev)
{
unsigned long int_ctrl_reg = dev->iobase + PCI9111_INT_CTRL_REG;
/* To reset the FIFO, set FFEN sequence as 0 -> 1 -> 0 */
outb(0, int_ctrl_reg);
outb(PCI9111_INT_CTRL_FFEN, int_ctrl_reg);
outb(0, int_ctrl_reg);
}
static int pci9111_ai_cancel(struct comedi_device *dev,
struct comedi_subdevice *s)
{
struct pci9111_private_data *dev_private = dev->private;
/* Disable interrupts */
plx9050_interrupt_control(dev_private->lcr_io_base, true, true, true,
true, false);
/* disable A/D triggers (software trigger mode) and auto scan off */
outb(0, dev->iobase + PCI9111_AI_TRIG_CTRL_REG);
pci9111_fifo_reset(dev);
return 0;
}
static int pci9111_ai_check_chanlist(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_cmd *cmd)
{
unsigned int range0 = CR_RANGE(cmd->chanlist[0]);
unsigned int aref0 = CR_AREF(cmd->chanlist[0]);
int i;
for (i = 1; i < cmd->chanlist_len; i++) {
unsigned int chan = CR_CHAN(cmd->chanlist[i]);
unsigned int range = CR_RANGE(cmd->chanlist[i]);
unsigned int aref = CR_AREF(cmd->chanlist[i]);
if (chan != i) {
dev_dbg(dev->class_dev,
"entries in chanlist must be consecutive channels,counting upwards from 0\n");
return -EINVAL;
}
if (range != range0) {
dev_dbg(dev->class_dev,
"entries in chanlist must all have the same gain\n");
return -EINVAL;
}
if (aref != aref0) {
dev_dbg(dev->class_dev,
"entries in chanlist must all have the same reference\n");
return -EINVAL;
}
}
return 0;
}
static int pci9111_ai_do_cmd_test(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_cmd *cmd)
{
int err = 0;
unsigned int arg;
/* Step 1 : check if triggers are trivially valid */
err |= comedi_check_trigger_src(&cmd->start_src, TRIG_NOW);
err |= comedi_check_trigger_src(&cmd->scan_begin_src,
TRIG_TIMER | TRIG_FOLLOW | TRIG_EXT);
err |= comedi_check_trigger_src(&cmd->convert_src,
TRIG_TIMER | TRIG_EXT);
err |= comedi_check_trigger_src(&cmd->scan_end_src, TRIG_COUNT);
err |= comedi_check_trigger_src(&cmd->stop_src,
TRIG_COUNT | TRIG_NONE);
if (err)
return 1;
/* Step 2a : make sure trigger sources are unique */
err |= comedi_check_trigger_is_unique(cmd->scan_begin_src);
err |= comedi_check_trigger_is_unique(cmd->convert_src);
err |= comedi_check_trigger_is_unique(cmd->stop_src);
/* Step 2b : and mutually compatible */
if (cmd->scan_begin_src != TRIG_FOLLOW) {
if (cmd->scan_begin_src != cmd->convert_src)
err |= -EINVAL;
}
if (err)
return 2;
/* Step 3: check if arguments are trivially valid */
err |= comedi_check_trigger_arg_is(&cmd->start_arg, 0);
if (cmd->convert_src == TRIG_TIMER) {
err |= comedi_check_trigger_arg_min(&cmd->convert_arg,
PCI9111_AI_ACQUISITION_PERIOD_MIN_NS);
} else { /* TRIG_EXT */
err |= comedi_check_trigger_arg_is(&cmd->convert_arg, 0);
}
if (cmd->scan_begin_src == TRIG_TIMER) {
err |= comedi_check_trigger_arg_min(&cmd->scan_begin_arg,
PCI9111_AI_ACQUISITION_PERIOD_MIN_NS);
} else { /* TRIG_FOLLOW || TRIG_EXT */
err |= comedi_check_trigger_arg_is(&cmd->scan_begin_arg, 0);
}
err |= comedi_check_trigger_arg_is(&cmd->scan_end_arg,
cmd->chanlist_len);
if (cmd->stop_src == TRIG_COUNT)
err |= comedi_check_trigger_arg_min(&cmd->stop_arg, 1);
else /* TRIG_NONE */
err |= comedi_check_trigger_arg_is(&cmd->stop_arg, 0);
if (err)
return 3;
/* Step 4: fix up any arguments */
if (cmd->convert_src == TRIG_TIMER) {
arg = cmd->convert_arg;
comedi_8254_cascade_ns_to_timer(dev->pacer, &arg, cmd->flags);
err |= comedi_check_trigger_arg_is(&cmd->convert_arg, arg);
}
/*
* There's only one timer on this card, so the scan_begin timer
* must be a multiple of chanlist_len*convert_arg
*/
if (cmd->scan_begin_src == TRIG_TIMER) {
arg = cmd->chanlist_len * cmd->convert_arg;
if (arg < cmd->scan_begin_arg)
arg *= (cmd->scan_begin_arg / arg);
err |= comedi_check_trigger_arg_is(&cmd->scan_begin_arg, arg);
}
if (err)
return 4;
/* Step 5: check channel list if it exists */
if (cmd->chanlist && cmd->chanlist_len > 0)
err |= pci9111_ai_check_chanlist(dev, s, cmd);
if (err)
return 5;
return 0;
}
static int pci9111_ai_do_cmd(struct comedi_device *dev,
struct comedi_subdevice *s)
{
struct pci9111_private_data *dev_private = dev->private;
struct comedi_cmd *cmd = &s->async->cmd;
unsigned int last_chan = CR_CHAN(cmd->chanlist[cmd->chanlist_len - 1]);
unsigned int range0 = CR_RANGE(cmd->chanlist[0]);
unsigned int trig = 0;
/* Set channel scan limit */
/* PCI9111 allows only scanning from channel 0 to channel n */
/* TODO: handle the case of an external multiplexer */
if (cmd->chanlist_len > 1)
trig |= PCI9111_AI_TRIG_CTRL_ASCAN;
outb(last_chan, dev->iobase + PCI9111_AI_CHANNEL_REG);
/* Set gain - all channels use the same range */
outb(PCI9111_AI_RANGE(range0), dev->iobase + PCI9111_AI_RANGE_STAT_REG);
/* Set timer pacer */
dev_private->scan_delay = 0;
if (cmd->convert_src == TRIG_TIMER) {
trig |= PCI9111_AI_TRIG_CTRL_TPST;
comedi_8254_update_divisors(dev->pacer);
comedi_8254_pacer_enable(dev->pacer, 1, 2, true);
pci9111_fifo_reset(dev);
pci9111_interrupt_source_set(dev, irq_on_fifo_half_full,
irq_on_timer_tick);
plx9050_interrupt_control(dev_private->lcr_io_base, true, true,
false, true, true);
if (cmd->scan_begin_src == TRIG_TIMER) {
dev_private->scan_delay = (cmd->scan_begin_arg /
(cmd->convert_arg * cmd->chanlist_len)) - 1;
}
} else { /* TRIG_EXT */
trig |= PCI9111_AI_TRIG_CTRL_ETIS;
pci9111_fifo_reset(dev);
pci9111_interrupt_source_set(dev, irq_on_fifo_half_full,
irq_on_timer_tick);
plx9050_interrupt_control(dev_private->lcr_io_base, true, true,
false, true, true);
}
outb(trig, dev->iobase + PCI9111_AI_TRIG_CTRL_REG);
dev_private->chunk_counter = 0;
dev_private->chunk_num_samples = cmd->chanlist_len *
(1 + dev_private->scan_delay);
return 0;
}
static void pci9111_ai_munge(struct comedi_device *dev,
struct comedi_subdevice *s, void *data,
unsigned int num_bytes,
unsigned int start_chan_index)
{
unsigned short *array = data;
unsigned int maxdata = s->maxdata;
unsigned int invert = (maxdata + 1) >> 1;
unsigned int shift = (maxdata == 0xffff) ? 0 : 4;
unsigned int num_samples = comedi_bytes_to_samples(s, num_bytes);
unsigned int i;
for (i = 0; i < num_samples; i++)
array[i] = ((array[i] >> shift) & maxdata) ^ invert;
}
static void pci9111_handle_fifo_half_full(struct comedi_device *dev,
struct comedi_subdevice *s)
{
struct pci9111_private_data *devpriv = dev->private;
struct comedi_cmd *cmd = &s->async->cmd;
unsigned short *buf = devpriv->ai_bounce_buffer;
unsigned int samples;
samples = comedi_nsamples_left(s, PCI9111_FIFO_HALF_SIZE);
insw(dev->iobase + PCI9111_AI_FIFO_REG, buf, samples);
if (devpriv->scan_delay < 1) {
comedi_buf_write_samples(s, buf, samples);
} else {
unsigned int pos = 0;
unsigned int to_read;
while (pos < samples) {
if (devpriv->chunk_counter < cmd->chanlist_len) {
to_read = cmd->chanlist_len -
devpriv->chunk_counter;
if (to_read > samples - pos)
to_read = samples - pos;
comedi_buf_write_samples(s, buf + pos, to_read);
} else {
to_read = devpriv->chunk_num_samples -
devpriv->chunk_counter;
if (to_read > samples - pos)
to_read = samples - pos;
}
pos += to_read;
devpriv->chunk_counter += to_read;
if (devpriv->chunk_counter >=
devpriv->chunk_num_samples)
devpriv->chunk_counter = 0;
}
}
}
static irqreturn_t pci9111_interrupt(int irq, void *p_device)
{
struct comedi_device *dev = p_device;
struct pci9111_private_data *dev_private = dev->private;
struct comedi_subdevice *s = dev->read_subdev;
struct comedi_async *async;
struct comedi_cmd *cmd;
unsigned int status;
unsigned long irq_flags;
unsigned char intcsr;
if (!dev->attached) {
/* Ignore interrupt before device fully attached. */
/* Might not even have allocated subdevices yet! */
return IRQ_NONE;
}
async = s->async;
cmd = &async->cmd;
spin_lock_irqsave(&dev->spinlock, irq_flags);
/* Check if we are source of interrupt */
intcsr = inb(dev_private->lcr_io_base + PLX9052_INTCSR);
if (!(((intcsr & PLX9052_INTCSR_PCIENAB) != 0) &&
(((intcsr & PCI9111_LI1_ACTIVE) == PCI9111_LI1_ACTIVE) ||
((intcsr & PCI9111_LI2_ACTIVE) == PCI9111_LI2_ACTIVE)))) {
/* Not the source of the interrupt. */
/* (N.B. not using PLX9052_INTCSR_SOFTINT) */
spin_unlock_irqrestore(&dev->spinlock, irq_flags);
return IRQ_NONE;
}
if ((intcsr & PCI9111_LI1_ACTIVE) == PCI9111_LI1_ACTIVE) {
/* Interrupt comes from fifo_half-full signal */
status = inb(dev->iobase + PCI9111_AI_RANGE_STAT_REG);
/* '0' means FIFO is full, data may have been lost */
if (!(status & PCI9111_AI_STAT_FF_FF)) {
spin_unlock_irqrestore(&dev->spinlock, irq_flags);
dev_dbg(dev->class_dev, "fifo overflow\n");
outb(0, dev->iobase + PCI9111_INT_CLR_REG);
async->events |= COMEDI_CB_ERROR;
comedi_handle_events(dev, s);
return IRQ_HANDLED;
}
/* '0' means FIFO is half-full */
if (!(status & PCI9111_AI_STAT_FF_HF))
pci9111_handle_fifo_half_full(dev, s);
}
if (cmd->stop_src == TRIG_COUNT && async->scans_done >= cmd->stop_arg)
async->events |= COMEDI_CB_EOA;
outb(0, dev->iobase + PCI9111_INT_CLR_REG);
spin_unlock_irqrestore(&dev->spinlock, irq_flags);
comedi_handle_events(dev, s);
return IRQ_HANDLED;
}
static int pci9111_ai_eoc(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn,
unsigned long context)
{
unsigned int status;
status = inb(dev->iobase + PCI9111_AI_RANGE_STAT_REG);
if (status & PCI9111_AI_STAT_FF_EF)
return 0;
return -EBUSY;
}
static int pci9111_ai_insn_read(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
unsigned int chan = CR_CHAN(insn->chanspec);
unsigned int range = CR_RANGE(insn->chanspec);
unsigned int maxdata = s->maxdata;
unsigned int invert = (maxdata + 1) >> 1;
unsigned int shift = (maxdata == 0xffff) ? 0 : 4;
unsigned int status;
int ret;
int i;
outb(chan, dev->iobase + PCI9111_AI_CHANNEL_REG);
status = inb(dev->iobase + PCI9111_AI_RANGE_STAT_REG);
if ((status & PCI9111_AI_RANGE_MASK) != range) {
outb(PCI9111_AI_RANGE(range),
dev->iobase + PCI9111_AI_RANGE_STAT_REG);
}
pci9111_fifo_reset(dev);
for (i = 0; i < insn->n; i++) {
/* Generate a software trigger */
outb(0, dev->iobase + PCI9111_SOFT_TRIG_REG);
ret = comedi_timeout(dev, s, insn, pci9111_ai_eoc, 0);
if (ret) {
pci9111_fifo_reset(dev);
return ret;
}
data[i] = inw(dev->iobase + PCI9111_AI_FIFO_REG);
data[i] = ((data[i] >> shift) & maxdata) ^ invert;
}
return i;
}
static int pci9111_ao_insn_write(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn,
unsigned int *data)
{
unsigned int chan = CR_CHAN(insn->chanspec);
unsigned int val = s->readback[chan];
int i;
for (i = 0; i < insn->n; i++) {
val = data[i];
outw(val, dev->iobase + PCI9111_AO_REG);
}
s->readback[chan] = val;
return insn->n;
}
static int pci9111_di_insn_bits(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn,
unsigned int *data)
{
data[1] = inw(dev->iobase + PCI9111_DIO_REG);
return insn->n;
}
static int pci9111_do_insn_bits(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn,
unsigned int *data)
{
if (comedi_dio_update_state(s, data))
outw(s->state, dev->iobase + PCI9111_DIO_REG);
data[1] = s->state;
return insn->n;
}
static int pci9111_reset(struct comedi_device *dev)
{
struct pci9111_private_data *dev_private = dev->private;
/* Set trigger source to software */
plx9050_interrupt_control(dev_private->lcr_io_base, true, true, true,
true, false);
/* disable A/D triggers (software trigger mode) and auto scan off */
outb(0, dev->iobase + PCI9111_AI_TRIG_CTRL_REG);
return 0;
}
static int pci9111_auto_attach(struct comedi_device *dev,
unsigned long context_unused)
{
struct pci_dev *pcidev = comedi_to_pci_dev(dev);
struct pci9111_private_data *dev_private;
struct comedi_subdevice *s;
int ret;
dev_private = comedi_alloc_devpriv(dev, sizeof(*dev_private));
if (!dev_private)
return -ENOMEM;
ret = comedi_pci_enable(dev);
if (ret)
return ret;
dev_private->lcr_io_base = pci_resource_start(pcidev, 1);
dev->iobase = pci_resource_start(pcidev, 2);
pci9111_reset(dev);
if (pcidev->irq) {
ret = request_irq(pcidev->irq, pci9111_interrupt,
IRQF_SHARED, dev->board_name, dev);
if (ret == 0)
dev->irq = pcidev->irq;
}
dev->pacer = comedi_8254_io_alloc(dev->iobase + PCI9111_8254_BASE_REG,
I8254_OSC_BASE_2MHZ, I8254_IO16, 0);
if (IS_ERR(dev->pacer))
return PTR_ERR(dev->pacer);
ret = comedi_alloc_subdevices(dev, 4);
if (ret)
return ret;
s = &dev->subdevices[0];
s->type = COMEDI_SUBD_AI;
s->subdev_flags = SDF_READABLE | SDF_COMMON;
s->n_chan = 16;
s->maxdata = 0xffff;
s->range_table = &pci9111_ai_range;
s->insn_read = pci9111_ai_insn_read;
if (dev->irq) {
dev->read_subdev = s;
s->subdev_flags |= SDF_CMD_READ;
s->len_chanlist = s->n_chan;
s->do_cmdtest = pci9111_ai_do_cmd_test;
s->do_cmd = pci9111_ai_do_cmd;
s->cancel = pci9111_ai_cancel;
s->munge = pci9111_ai_munge;
}
s = &dev->subdevices[1];
s->type = COMEDI_SUBD_AO;
s->subdev_flags = SDF_WRITABLE | SDF_COMMON;
s->n_chan = 1;
s->maxdata = 0x0fff;
s->len_chanlist = 1;
s->range_table = &range_bipolar10;
s->insn_write = pci9111_ao_insn_write;
ret = comedi_alloc_subdev_readback(s);
if (ret)
return ret;
s = &dev->subdevices[2];
s->type = COMEDI_SUBD_DI;
s->subdev_flags = SDF_READABLE;
s->n_chan = 16;
s->maxdata = 1;
s->range_table = &range_digital;
s->insn_bits = pci9111_di_insn_bits;
s = &dev->subdevices[3];
s->type = COMEDI_SUBD_DO;
s->subdev_flags = SDF_WRITABLE;
s->n_chan = 16;
s->maxdata = 1;
s->range_table = &range_digital;
s->insn_bits = pci9111_do_insn_bits;
return 0;
}
static void pci9111_detach(struct comedi_device *dev)
{
if (dev->iobase)
pci9111_reset(dev);
comedi_pci_detach(dev);
}
static struct comedi_driver adl_pci9111_driver = {
.driver_name = "adl_pci9111",
.module = THIS_MODULE,
.auto_attach = pci9111_auto_attach,
.detach = pci9111_detach,
};
static int pci9111_pci_probe(struct pci_dev *dev,
const struct pci_device_id *id)
{
return comedi_pci_auto_config(dev, &adl_pci9111_driver,
id->driver_data);
}
static const struct pci_device_id pci9111_pci_table[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_ADLINK, 0x9111) },
/* { PCI_DEVICE(PCI_VENDOR_ID_ADLINK, PCI9111_HG_DEVICE_ID) }, */
{ 0 }
};
MODULE_DEVICE_TABLE(pci, pci9111_pci_table);
static struct pci_driver adl_pci9111_pci_driver = {
.name = "adl_pci9111",
.id_table = pci9111_pci_table,
.probe = pci9111_pci_probe,
.remove = comedi_pci_auto_unconfig,
};
module_comedi_pci_driver(adl_pci9111_driver, adl_pci9111_pci_driver);
MODULE_AUTHOR("Comedi https://www.comedi.org");
MODULE_DESCRIPTION("Comedi low-level driver");
MODULE_LICENSE("GPL");
Codebase Browser
linux