// SPDX-License-Identifier: GPL-2.0+
/*
* adv_pci1724.c
* Comedi driver for the Advantech PCI-1724U card.
*
* Author: Frank Mori Hess <[email protected]>
* Copyright (C) 2013 GnuBIO Inc
*
* COMEDI - Linux Control and Measurement Device Interface
* Copyright (C) 1997-8 David A. Schleef <[email protected]>
*/
/*
* Driver: adv_pci1724
* Description: Advantech PCI-1724U
* Devices: [Advantech] PCI-1724U (adv_pci1724)
* Author: Frank Mori Hess <[email protected]>
* Updated: 2013-02-09
* Status: works
*
* Configuration Options: not applicable, uses comedi PCI auto config
*
* Subdevice 0 is the analog output.
* Subdevice 1 is the offset calibration for the analog output.
* Subdevice 2 is the gain calibration for the analog output.
*
* The calibration offset and gains have quite a large effect on the
* analog output, so it is possible to adjust the analog output to
* have an output range significantly different from the board's
* nominal output ranges. For a calibrated +/-10V range, the analog
* output's offset will be set somewhere near mid-range (0x2000) and
* its gain will be near maximum (0x3fff).
*
* There is really no difference between the board's documented 0-20mA
* versus 4-20mA output ranges. To pick one or the other is simply a
* matter of adjusting the offset and gain calibration until the board
* outputs in the desired range.
*/
#include <linux/module.h>
#include <linux/comedi/comedi_pci.h>
/*
* PCI bar 2 Register I/O map (dev->iobase)
*/
#define PCI1724_DAC_CTRL_REG 0x00
#define PCI1724_DAC_CTRL_GX(x) BIT(20 + ((x) / 8))
#define PCI1724_DAC_CTRL_CX(x) (((x) % 8) << 16)
#define PCI1724_DAC_CTRL_MODE(x) (((x) & 0x3) << 14)
#define PCI1724_DAC_CTRL_MODE_GAIN PCI1724_DAC_CTRL_MODE(1)
#define PCI1724_DAC_CTRL_MODE_OFFSET PCI1724_DAC_CTRL_MODE(2)
#define PCI1724_DAC_CTRL_MODE_NORMAL PCI1724_DAC_CTRL_MODE(3)
#define PCI1724_DAC_CTRL_MODE_MASK PCI1724_DAC_CTRL_MODE(3)
#define PCI1724_DAC_CTRL_DATA(x) (((x) & 0x3fff) << 0)
#define PCI1724_SYNC_CTRL_REG 0x04
#define PCI1724_SYNC_CTRL_DACSTAT BIT(1)
#define PCI1724_SYNC_CTRL_SYN BIT(0)
#define PCI1724_EEPROM_CTRL_REG 0x08
#define PCI1724_SYNC_TRIG_REG 0x0c /* any value works */
#define PCI1724_BOARD_ID_REG 0x10
#define PCI1724_BOARD_ID_MASK (0xf << 0)
static const struct comedi_lrange adv_pci1724_ao_ranges = {
4, {
BIP_RANGE(10),
RANGE_mA(0, 20),
RANGE_mA(4, 20),
RANGE_unitless(0, 1)
}
};
static int adv_pci1724_dac_idle(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn,
unsigned long context)
{
unsigned int status;
status = inl(dev->iobase + PCI1724_SYNC_CTRL_REG);
if ((status & PCI1724_SYNC_CTRL_DACSTAT) == 0)
return 0;
return -EBUSY;
}
static int adv_pci1724_insn_write(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn,
unsigned int *data)
{
unsigned long mode = (unsigned long)s->private;
unsigned int chan = CR_CHAN(insn->chanspec);
unsigned int ctrl;
int ret;
int i;
ctrl = PCI1724_DAC_CTRL_GX(chan) | PCI1724_DAC_CTRL_CX(chan) | mode;
/* turn off synchronous mode */
outl(0, dev->iobase + PCI1724_SYNC_CTRL_REG);
for (i = 0; i < insn->n; ++i) {
unsigned int val = data[i];
ret = comedi_timeout(dev, s, insn, adv_pci1724_dac_idle, 0);
if (ret)
return ret;
outl(ctrl | PCI1724_DAC_CTRL_DATA(val),
dev->iobase + PCI1724_DAC_CTRL_REG);
s->readback[chan] = val;
}
return insn->n;
}
static int adv_pci1724_auto_attach(struct comedi_device *dev,
unsigned long context_unused)
{
struct pci_dev *pcidev = comedi_to_pci_dev(dev);
struct comedi_subdevice *s;
unsigned int board_id;
int ret;
ret = comedi_pci_enable(dev);
if (ret)
return ret;
dev->iobase = pci_resource_start(pcidev, 2);
board_id = inl(dev->iobase + PCI1724_BOARD_ID_REG);
dev_info(dev->class_dev, "board id: %d\n",
board_id & PCI1724_BOARD_ID_MASK);
ret = comedi_alloc_subdevices(dev, 3);
if (ret)
return ret;
/* Analog Output subdevice */
s = &dev->subdevices[0];
s->type = COMEDI_SUBD_AO;
s->subdev_flags = SDF_READABLE | SDF_WRITABLE | SDF_GROUND;
s->n_chan = 32;
s->maxdata = 0x3fff;
s->range_table = &adv_pci1724_ao_ranges;
s->insn_write = adv_pci1724_insn_write;
s->private = (void *)PCI1724_DAC_CTRL_MODE_NORMAL;
ret = comedi_alloc_subdev_readback(s);
if (ret)
return ret;
/* Offset Calibration subdevice */
s = &dev->subdevices[1];
s->type = COMEDI_SUBD_CALIB;
s->subdev_flags = SDF_READABLE | SDF_WRITABLE | SDF_INTERNAL;
s->n_chan = 32;
s->maxdata = 0x3fff;
s->insn_write = adv_pci1724_insn_write;
s->private = (void *)PCI1724_DAC_CTRL_MODE_OFFSET;
ret = comedi_alloc_subdev_readback(s);
if (ret)
return ret;
/* Gain Calibration subdevice */
s = &dev->subdevices[2];
s->type = COMEDI_SUBD_CALIB;
s->subdev_flags = SDF_READABLE | SDF_WRITABLE | SDF_INTERNAL;
s->n_chan = 32;
s->maxdata = 0x3fff;
s->insn_write = adv_pci1724_insn_write;
s->private = (void *)PCI1724_DAC_CTRL_MODE_GAIN;
return comedi_alloc_subdev_readback(s);
}
static struct comedi_driver adv_pci1724_driver = {
.driver_name = "adv_pci1724",
.module = THIS_MODULE,
.auto_attach = adv_pci1724_auto_attach,
.detach = comedi_pci_detach,
};
static int adv_pci1724_pci_probe(struct pci_dev *dev,
const struct pci_device_id *id)
{
return comedi_pci_auto_config(dev, &adv_pci1724_driver,
id->driver_data);
}
static const struct pci_device_id adv_pci1724_pci_table[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_ADVANTECH, 0x1724) },
{ 0 }
};
MODULE_DEVICE_TABLE(pci, adv_pci1724_pci_table);
static struct pci_driver adv_pci1724_pci_driver = {
.name = "adv_pci1724",
.id_table = adv_pci1724_pci_table,
.probe = adv_pci1724_pci_probe,
.remove = comedi_pci_auto_unconfig,
};
module_comedi_pci_driver(adv_pci1724_driver, adv_pci1724_pci_driver);
MODULE_AUTHOR("Frank Mori Hess <[email protected]>");
MODULE_DESCRIPTION("Advantech PCI-1724U Comedi driver");
MODULE_LICENSE("GPL");