// SPDX-License-Identifier: GPL-2.0+
/*
* Driver for National Instruments daqcard-1200 boards
* Copyright (C) 2001, 2002, 2003 Frank Mori Hess <[email protected]>
*
* PCMCIA crap is adapted from dummy_cs.c 1.31 2001/08/24 12:13:13
* from the pcmcia package.
* The initial developer of the pcmcia dummy_cs.c code is David A. Hinds
* <[email protected]>. Portions created by David A. Hinds
* are Copyright (C) 1999 David A. Hinds.
*/
/*
* Driver: ni_labpc_cs
* Description: National Instruments Lab-PC (& compatibles)
* Author: Frank Mori Hess <[email protected]>
* Devices: [National Instruments] DAQCard-1200 (daqcard-1200)
* Status: works
*
* Thanks go to Fredrik Lingvall for much testing and perseverance in
* helping to debug daqcard-1200 support.
*
* The 1200 series boards have onboard calibration dacs for correcting
* analog input/output offsets and gains. The proper settings for these
* caldacs are stored on the board's eeprom. To read the caldac values
* from the eeprom and store them into a file that can be then be used by
* comedilib, use the comedi_calibrate program.
*
* Configuration options: none
*
* The daqcard-1200 has quirky chanlist requirements when scanning multiple
* channels. Multiple channel scan sequence must start at highest channel,
* then decrement down to channel 0. Chanlists consisting of all one channel
* are also legal, and allow you to pace conversions in bursts.
*
* NI manuals:
* 340988a (daqcard-1200)
*/
#include <linux/module.h>
#include <linux/comedi/comedi_pcmcia.h>
#include "ni_labpc.h"
static const struct labpc_boardinfo labpc_cs_boards[] = {
{
.name = "daqcard-1200",
.ai_speed = 10000,
.has_ao = 1,
.is_labpc1200 = 1,
},
};
static int labpc_cs_auto_attach(struct comedi_device *dev,
unsigned long context)
{
struct pcmcia_device *link = comedi_to_pcmcia_dev(dev);
int ret;
/* The ni_labpc driver needs the board_ptr */
dev->board_ptr = &labpc_cs_boards[0];
link->config_flags |= CONF_AUTO_SET_IO |
CONF_ENABLE_IRQ | CONF_ENABLE_PULSE_IRQ;
ret = comedi_pcmcia_enable(dev, NULL);
if (ret)
return ret;
dev->iobase = link->resource[0]->start;
if (!link->irq)
return -EINVAL;
return labpc_common_attach(dev, link->irq, IRQF_SHARED);
}
static void labpc_cs_detach(struct comedi_device *dev)
{
labpc_common_detach(dev);
comedi_pcmcia_disable(dev);
}
static struct comedi_driver driver_labpc_cs = {
.driver_name = "ni_labpc_cs",
.module = THIS_MODULE,
.auto_attach = labpc_cs_auto_attach,
.detach = labpc_cs_detach,
};
static int labpc_cs_attach(struct pcmcia_device *link)
{
return comedi_pcmcia_auto_config(link, &driver_labpc_cs);
}
static const struct pcmcia_device_id labpc_cs_ids[] = {
PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0103), /* daqcard-1200 */
PCMCIA_DEVICE_NULL
};
MODULE_DEVICE_TABLE(pcmcia, labpc_cs_ids);
static struct pcmcia_driver labpc_cs_driver = {
.name = "daqcard-1200",
.owner = THIS_MODULE,
.id_table = labpc_cs_ids,
.probe = labpc_cs_attach,
.remove = comedi_pcmcia_auto_unconfig,
};
module_comedi_pcmcia_driver(driver_labpc_cs, labpc_cs_driver);
MODULE_DESCRIPTION("Comedi driver for National Instruments Lab-PC");
MODULE_AUTHOR("Frank Mori Hess <[email protected]>");
MODULE_LICENSE("GPL");
Codebase Browser
linux