/* SPDX-License-Identifier: LGPL-2.1+ WITH Linux-syscall-note */
/*
* video.h - DEPRECATED MPEG-TS video decoder API
*
* NOTE: should not be used on future drivers
*
* Copyright (C) 2000 Marcus Metzler <[email protected]>
* & Ralph Metzler <[email protected]>
* for convergence integrated media GmbH
*/
#ifndef _UAPI_DVBVIDEO_H_
#define _UAPI_DVBVIDEO_H_
#include <linux/types.h>
#ifndef __KERNEL__
#include <time.h>
#endif
typedef enum {
VIDEO_FORMAT_4_3, /* Select 4:3 format */
VIDEO_FORMAT_16_9, /* Select 16:9 format. */
VIDEO_FORMAT_221_1 /* 2.21:1 */
} video_format_t;
typedef enum {
VIDEO_PAN_SCAN, /* use pan and scan format */
VIDEO_LETTER_BOX, /* use letterbox format */
VIDEO_CENTER_CUT_OUT /* use center cut out format */
} video_displayformat_t;
typedef struct {
int w;
int h;
video_format_t aspect_ratio;
} video_size_t;
typedef enum {
VIDEO_SOURCE_DEMUX, /* Select the demux as the main source */
VIDEO_SOURCE_MEMORY /* If this source is selected, the stream
comes from the user through the write
system call */
} video_stream_source_t;
typedef enum {
VIDEO_STOPPED, /* Video is stopped */
VIDEO_PLAYING, /* Video is currently playing */
VIDEO_FREEZED /* Video is freezed */
} video_play_state_t;
/* Decoder commands */
#define VIDEO_CMD_PLAY (0)
#define VIDEO_CMD_STOP (1)
#define VIDEO_CMD_FREEZE (2)
#define VIDEO_CMD_CONTINUE (3)
/* Flags for VIDEO_CMD_FREEZE */
#define VIDEO_CMD_FREEZE_TO_BLACK (1 << 0)
/* Flags for VIDEO_CMD_STOP */
#define VIDEO_CMD_STOP_TO_BLACK (1 << 0)
#define VIDEO_CMD_STOP_IMMEDIATELY (1 << 1)
/* Play input formats: */
/* The decoder has no special format requirements */
#define VIDEO_PLAY_FMT_NONE (0)
/* The decoder requires full GOPs */
#define VIDEO_PLAY_FMT_GOP (1)
/* The structure must be zeroed before use by the application
This ensures it can be extended safely in the future. */
struct video_command {
__u32 cmd;
__u32 flags;
union {
struct {
__u64 pts;
} stop;
struct {
/* 0 or 1000 specifies normal speed,
1 specifies forward single stepping,
-1 specifies backward single stepping,
>1: playback at speed/1000 of the normal speed,
<-1: reverse playback at (-speed/1000) of the normal speed. */
__s32 speed;
__u32 format;
} play;
struct {
__u32 data[16];
} raw;
};
};
/* FIELD_UNKNOWN can be used if the hardware does not know whether
the Vsync is for an odd, even or progressive (i.e. non-interlaced)
field. */
#define VIDEO_VSYNC_FIELD_UNKNOWN (0)
#define VIDEO_VSYNC_FIELD_ODD (1)
#define VIDEO_VSYNC_FIELD_EVEN (2)
#define VIDEO_VSYNC_FIELD_PROGRESSIVE (3)
struct video_event {
__s32 type;
#define VIDEO_EVENT_SIZE_CHANGED 1
#define VIDEO_EVENT_FRAME_RATE_CHANGED 2
#define VIDEO_EVENT_DECODER_STOPPED 3
#define VIDEO_EVENT_VSYNC 4
/* unused, make sure to use atomic time for y2038 if it ever gets used */
long timestamp;
union {
video_size_t size;
unsigned int frame_rate; /* in frames per 1000sec */
unsigned char vsync_field; /* unknown/odd/even/progressive */
} u;
};
struct video_status {
int video_blank; /* blank video on freeze? */
video_play_state_t play_state; /* current state of playback */
video_stream_source_t stream_source; /* current source (demux/memory) */
video_format_t video_format; /* current aspect ratio of stream*/
video_displayformat_t display_format;/* selected cropping mode */
};
struct video_still_picture {
char __user *iFrame; /* pointer to a single iframe in memory */
__s32 size;
};
typedef __u16 video_attributes_t;
/* bits: descr. */
/* 15-14 Video compression mode (0=MPEG-1, 1=MPEG-2) */
/* 13-12 TV system (0=525/60, 1=625/50) */
/* 11-10 Aspect ratio (0=4:3, 3=16:9) */
/* 9- 8 permitted display mode on 4:3 monitor (0=both, 1=only pan-sca */
/* 7 line 21-1 data present in GOP (1=yes, 0=no) */
/* 6 line 21-2 data present in GOP (1=yes, 0=no) */
/* 5- 3 source resolution (0=720x480/576, 1=704x480/576, 2=352x480/57 */
/* 2 source letterboxed (1=yes, 0=no) */
/* 0 film/camera mode (0=
*camera, 1=film (625/50 only)) */
/* bit definitions for capabilities: */
/* can the hardware decode MPEG1 and/or MPEG2? */
#define VIDEO_CAP_MPEG1 1
#define VIDEO_CAP_MPEG2 2
/* can you send a system and/or program stream to video device?
(you still have to open the video and the audio device but only
send the stream to the video device) */
#define VIDEO_CAP_SYS 4
#define VIDEO_CAP_PROG 8
/* can the driver also handle SPU, NAVI and CSS encoded data?
(CSS API is not present yet) */
#define VIDEO_CAP_SPU 16
#define VIDEO_CAP_NAVI 32
#define VIDEO_CAP_CSS 64
#define VIDEO_STOP _IO('o', 21)
#define VIDEO_PLAY _IO('o', 22)
#define VIDEO_FREEZE _IO('o', 23)
#define VIDEO_CONTINUE _IO('o', 24)
#define VIDEO_SELECT_SOURCE _IO('o', 25)
#define VIDEO_SET_BLANK _IO('o', 26)
#define VIDEO_GET_STATUS _IOR('o', 27, struct video_status)
#define VIDEO_GET_EVENT _IOR('o', 28, struct video_event)
#define VIDEO_SET_DISPLAY_FORMAT _IO('o', 29)
#define VIDEO_STILLPICTURE _IOW('o', 30, struct video_still_picture)
#define VIDEO_FAST_FORWARD _IO('o', 31)
#define VIDEO_SLOWMOTION _IO('o', 32)
#define VIDEO_GET_CAPABILITIES _IOR('o', 33, unsigned int)
#define VIDEO_CLEAR_BUFFER _IO('o', 34)
#define VIDEO_SET_STREAMTYPE _IO('o', 36)
#define VIDEO_SET_FORMAT _IO('o', 37)
#define VIDEO_GET_SIZE _IOR('o', 55, video_size_t)
/**
* VIDEO_GET_PTS
*
* Read the 33 bit presentation time stamp as defined
* in ITU T-REC-H.222.0 / ISO/IEC 13818-1.
*
* The PTS should belong to the currently played
* frame if possible, but may also be a value close to it
* like the PTS of the last decoded frame or the last PTS
* extracted by the PES parser.
*/
#define VIDEO_GET_PTS _IOR('o', 57, __u64)
/* Read the number of displayed frames since the decoder was started */
#define VIDEO_GET_FRAME_COUNT _IOR('o', 58, __u64)
#define VIDEO_COMMAND _IOWR('o', 59, struct video_command)
#define VIDEO_TRY_COMMAND _IOWR('o', 60, struct video_command)
#endif /* _UAPI_DVBVIDEO_H_ */
Codebase Browser
linux