// SPDX-License-Identifier: GPL-2.0-only
/*
* Remote Processor Framework
*/
#include <linux/remoteproc.h>
#include <linux/slab.h>
#include "remoteproc_internal.h"
#define to_rproc(d) container_of(d, struct rproc, dev)
static ssize_t recovery_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct rproc *rproc = to_rproc(dev);
return sysfs_emit(buf, "%s", rproc->recovery_disabled ? "disabled\n" : "enabled\n");
}
/*
* By writing to the 'recovery' sysfs entry, we control the behavior of the
* recovery mechanism dynamically. The default value of this entry is "enabled".
*
* The 'recovery' sysfs entry supports these commands:
*
* enabled: When enabled, the remote processor will be automatically
* recovered whenever it crashes. Moreover, if the remote
* processor crashes while recovery is disabled, it will
* be automatically recovered too as soon as recovery is enabled.
*
* disabled: When disabled, a remote processor will remain in a crashed
* state if it crashes. This is useful for debugging purposes;
* without it, debugging a crash is substantially harder.
*
* recover: This function will trigger an immediate recovery if the
* remote processor is in a crashed state, without changing
* or checking the recovery state (enabled/disabled).
* This is useful during debugging sessions, when one expects
* additional crashes to happen after enabling recovery. In this
* case, enabling recovery will make it hard to debug subsequent
* crashes, so it's recommended to keep recovery disabled, and
* instead use the "recover" command as needed.
*/
static ssize_t recovery_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
struct rproc *rproc = to_rproc(dev);
if (sysfs_streq(buf, "enabled")) {
/* change the flag and begin the recovery process if needed */
rproc->recovery_disabled = false;
rproc_trigger_recovery(rproc);
} else if (sysfs_streq(buf, "disabled")) {
rproc->recovery_disabled = true;
} else if (sysfs_streq(buf, "recover")) {
/* begin the recovery process without changing the flag */
rproc_trigger_recovery(rproc);
} else {
return -EINVAL;
}
return count;
}
static DEVICE_ATTR_RW(recovery);
/*
* A coredump-configuration-to-string lookup table, for exposing a
* human readable configuration via sysfs. Always keep in sync with
* enum rproc_coredump_mechanism
*/
static const char * const rproc_coredump_str[] = {
[RPROC_COREDUMP_DISABLED] = "disabled",
[RPROC_COREDUMP_ENABLED] = "enabled",
[RPROC_COREDUMP_INLINE] = "inline",
};
/* Expose the current coredump configuration via debugfs */
static ssize_t coredump_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct rproc *rproc = to_rproc(dev);
return sysfs_emit(buf, "%s\n", rproc_coredump_str[rproc->dump_conf]);
}
/*
* By writing to the 'coredump' sysfs entry, we control the behavior of the
* coredump mechanism dynamically. The default value of this entry is "default".
*
* The 'coredump' sysfs entry supports these commands:
*
* disabled: This is the default coredump mechanism. Recovery will proceed
* without collecting any dump.
*
* default: When the remoteproc crashes the entire coredump will be
* copied to a separate buffer and exposed to userspace.
*
* inline: The coredump will not be copied to a separate buffer and the
* recovery process will have to wait until data is read by
* userspace. But this avoid usage of extra memory.
*/
static ssize_t coredump_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
struct rproc *rproc = to_rproc(dev);
if (rproc->state == RPROC_CRASHED) {
dev_err(&rproc->dev, "can't change coredump configuration\n");
return -EBUSY;
}
if (sysfs_streq(buf, "disabled")) {
rproc->dump_conf = RPROC_COREDUMP_DISABLED;
} else if (sysfs_streq(buf, "enabled")) {
rproc->dump_conf = RPROC_COREDUMP_ENABLED;
} else if (sysfs_streq(buf, "inline")) {
rproc->dump_conf = RPROC_COREDUMP_INLINE;
} else {
dev_err(&rproc->dev, "Invalid coredump configuration\n");
return -EINVAL;
}
return count;
}
static DEVICE_ATTR_RW(coredump);
/* Expose the loaded / running firmware name via sysfs */
static ssize_t firmware_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct rproc *rproc = to_rproc(dev);
const char *firmware = rproc->firmware;
/*
* If the remote processor has been started by an external
* entity we have no idea of what image it is running. As such
* simply display a generic string rather then rproc->firmware.
*/
if (rproc->state == RPROC_ATTACHED)
firmware = "unknown";
return sprintf(buf, "%s\n", firmware);
}
/* Change firmware name via sysfs */
static ssize_t firmware_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
struct rproc *rproc = to_rproc(dev);
int err;
err = rproc_set_firmware(rproc, buf);
return err ? err : count;
}
static DEVICE_ATTR_RW(firmware);
/*
* A state-to-string lookup table, for exposing a human readable state
* via sysfs. Always keep in sync with enum rproc_state
*/
static const char * const rproc_state_string[] = {
[RPROC_OFFLINE] = "offline",
[RPROC_SUSPENDED] = "suspended",
[RPROC_RUNNING] = "running",
[RPROC_CRASHED] = "crashed",
[RPROC_DELETED] = "deleted",
[RPROC_ATTACHED] = "attached",
[RPROC_DETACHED] = "detached",
[RPROC_LAST] = "invalid",
};
/* Expose the state of the remote processor via sysfs */
static ssize_t state_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct rproc *rproc = to_rproc(dev);
unsigned int state;
state = rproc->state > RPROC_LAST ? RPROC_LAST : rproc->state;
return sprintf(buf, "%s\n", rproc_state_string[state]);
}
/* Change remote processor state via sysfs */
static ssize_t state_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
struct rproc *rproc = to_rproc(dev);
int ret = 0;
if (sysfs_streq(buf, "start")) {
ret = rproc_boot(rproc);
if (ret)
dev_err(&rproc->dev, "Boot failed: %d\n", ret);
} else if (sysfs_streq(buf, "stop")) {
ret = rproc_shutdown(rproc);
} else if (sysfs_streq(buf, "detach")) {
ret = rproc_detach(rproc);
} else {
dev_err(&rproc->dev, "Unrecognised option: %s\n", buf);
ret = -EINVAL;
}
return ret ? ret : count;
}
static DEVICE_ATTR_RW(state);
/* Expose the name of the remote processor via sysfs */
static ssize_t name_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct rproc *rproc = to_rproc(dev);
return sprintf(buf, "%s\n", rproc->name);
}
static DEVICE_ATTR_RO(name);
static umode_t rproc_is_visible(struct kobject *kobj, struct attribute *attr,
int n)
{
struct device *dev = kobj_to_dev(kobj);
struct rproc *rproc = to_rproc(dev);
umode_t mode = attr->mode;
if (rproc->sysfs_read_only && (attr == &dev_attr_recovery.attr ||
attr == &dev_attr_firmware.attr ||
attr == &dev_attr_state.attr ||
attr == &dev_attr_coredump.attr))
mode = 0444;
return mode;
}
static struct attribute *rproc_attrs[] = {
&dev_attr_coredump.attr,
&dev_attr_recovery.attr,
&dev_attr_firmware.attr,
&dev_attr_state.attr,
&dev_attr_name.attr,
NULL
};
static const struct attribute_group rproc_devgroup = {
.attrs = rproc_attrs,
.is_visible = rproc_is_visible,
};
static const struct attribute_group *rproc_devgroups[] = {
&rproc_devgroup,
NULL
};
const struct class rproc_class = {
.name = "remoteproc",
.dev_groups = rproc_devgroups,
};
int __init rproc_init_sysfs(void)
{
/* create remoteproc device class for sysfs */
int err = class_register(&rproc_class);
if (err)
pr_err("remoteproc: unable to register class\n");
return err;
}
void __exit rproc_exit_sysfs(void)
{
class_unregister(&rproc_class);
}
Codebase Browser
linux