/* SPDX-License-Identifier: GPL-2.0-only */
/*
* STMicroelectronics sensors library driver
*
* Copyright 2012-2013 STMicroelectronics Inc.
*
* Denis Ciocca <[email protected]>
*/
#ifndef ST_SENSORS_H
#define ST_SENSORS_H
#include <linux/i2c.h>
#include <linux/spi/spi.h>
#include <linux/irqreturn.h>
#include <linux/iio/iio.h>
#include <linux/iio/trigger.h>
#include <linux/bitops.h>
#include <linux/regulator/consumer.h>
#include <linux/regmap.h>
#include <linux/platform_data/st_sensors_pdata.h>
#define LSM9DS0_IMU_DEV_NAME "lsm9ds0"
#define LSM303D_IMU_DEV_NAME "lsm303d"
/*
* Buffer size max case: 2bytes per channel, 3 channels in total +
* 8bytes timestamp channel (s64)
*/
#define ST_SENSORS_MAX_BUFFER_SIZE (ALIGN(2 * 3, sizeof(s64)) + \
sizeof(s64))
#define ST_SENSORS_ODR_LIST_MAX 10
#define ST_SENSORS_FULLSCALE_AVL_MAX 10
#define ST_SENSORS_NUMBER_ALL_CHANNELS 4
#define ST_SENSORS_ENABLE_ALL_AXIS 0x07
#define ST_SENSORS_SCAN_X 0
#define ST_SENSORS_SCAN_Y 1
#define ST_SENSORS_SCAN_Z 2
#define ST_SENSORS_DEFAULT_POWER_ON_VALUE 0x01
#define ST_SENSORS_DEFAULT_POWER_OFF_VALUE 0x00
#define ST_SENSORS_DEFAULT_WAI_ADDRESS 0x0f
#define ST_SENSORS_DEFAULT_AXIS_ADDR 0x20
#define ST_SENSORS_DEFAULT_AXIS_MASK 0x07
#define ST_SENSORS_DEFAULT_AXIS_N_BIT 3
#define ST_SENSORS_DEFAULT_STAT_ADDR 0x27
#define ST_SENSORS_MAX_NAME 17
#define ST_SENSORS_MAX_4WAI 8
#define ST_SENSORS_LSM_CHANNELS_EXT(device_type, mask, index, mod, \
ch2, s, endian, rbits, sbits, addr, ext) \
{ \
.type = device_type, \
.modified = mod, \
.info_mask_separate = mask, \
.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), \
.scan_index = index, \
.channel2 = ch2, \
.address = addr, \
.scan_type = { \
.sign = s, \
.realbits = rbits, \
.shift = sbits - rbits, \
.storagebits = sbits, \
.endianness = endian, \
}, \
.ext_info = ext, \
}
#define ST_SENSORS_LSM_CHANNELS(device_type, mask, index, mod, \
ch2, s, endian, rbits, sbits, addr) \
ST_SENSORS_LSM_CHANNELS_EXT(device_type, mask, index, mod, \
ch2, s, endian, rbits, sbits, addr, NULL)
#define ST_SENSORS_DEV_ATTR_SAMP_FREQ_AVAIL() \
IIO_DEV_ATTR_SAMP_FREQ_AVAIL( \
st_sensors_sysfs_sampling_frequency_avail)
#define ST_SENSORS_DEV_ATTR_SCALE_AVAIL(name) \
IIO_DEVICE_ATTR(name, S_IRUGO, \
st_sensors_sysfs_scale_avail, NULL , 0);
struct st_sensor_odr_avl {
unsigned int hz;
u8 value;
};
struct st_sensor_odr {
u8 addr;
u8 mask;
struct st_sensor_odr_avl odr_avl[ST_SENSORS_ODR_LIST_MAX];
};
struct st_sensor_power {
u8 addr;
u8 mask;
u8 value_off;
u8 value_on;
};
struct st_sensor_axis {
u8 addr;
u8 mask;
};
struct st_sensor_fullscale_avl {
unsigned int num;
u8 value;
unsigned int gain;
unsigned int gain2;
};
struct st_sensor_fullscale {
u8 addr;
u8 mask;
struct st_sensor_fullscale_avl fs_avl[ST_SENSORS_FULLSCALE_AVL_MAX];
};
struct st_sensor_sim {
u8 addr;
u8 value;
};
/**
* struct st_sensor_bdu - ST sensor device block data update
* @addr: address of the register.
* @mask: mask to write the block data update flag.
*/
struct st_sensor_bdu {
u8 addr;
u8 mask;
};
/**
* struct st_sensor_das - ST sensor device data alignment selection
* @addr: address of the register.
* @mask: mask to write the das flag for left alignment.
*/
struct st_sensor_das {
u8 addr;
u8 mask;
};
/**
* struct st_sensor_int_drdy - ST sensor device drdy line parameters
* @addr: address of INT drdy register.
* @mask: mask to enable drdy line.
* @addr_od: address to enable/disable Open Drain on the INT line.
* @mask_od: mask to enable/disable Open Drain on the INT line.
*/
struct st_sensor_int_drdy {
u8 addr;
u8 mask;
u8 addr_od;
u8 mask_od;
};
/**
* struct st_sensor_data_ready_irq - ST sensor device data-ready interrupt
* struct int1 - data-ready configuration register for INT1 pin.
* struct int2 - data-ready configuration register for INT2 pin.
* @addr_ihl: address to enable/disable active low on the INT lines.
* @mask_ihl: mask to enable/disable active low on the INT lines.
* struct stat_drdy - status register of DRDY (data ready) interrupt.
* struct ig1 - represents the Interrupt Generator 1 of sensors.
* @en_addr: address of the enable ig1 register.
* @en_mask: mask to write the on/off value for enable.
*/
struct st_sensor_data_ready_irq {
struct st_sensor_int_drdy int1;
struct st_sensor_int_drdy int2;
u8 addr_ihl;
u8 mask_ihl;
struct {
u8 addr;
u8 mask;
} stat_drdy;
struct {
u8 en_addr;
u8 en_mask;
} ig1;
};
/**
* struct st_sensor_settings - ST specific sensor settings
* @wai: Contents of WhoAmI register.
* @wai_addr: The address of WhoAmI register.
* @sensors_supported: List of supported sensors by struct itself.
* @ch: IIO channels for the sensor.
* @odr: Output data rate register and ODR list available.
* @pw: Power register of the sensor.
* @enable_axis: Enable one or more axis of the sensor.
* @fs: Full scale register and full scale list available.
* @bdu: Block data update register.
* @das: Data Alignment Selection register.
* @drdy_irq: Data ready register of the sensor.
* @sim: SPI serial interface mode register of the sensor.
* @multi_read_bit: Use or not particular bit for [I2C/SPI] multi-read.
* @bootime: samples to discard when sensor passing from power-down to power-up.
*/
struct st_sensor_settings {
u8 wai;
u8 wai_addr;
char sensors_supported[ST_SENSORS_MAX_4WAI][ST_SENSORS_MAX_NAME];
struct iio_chan_spec *ch;
int num_ch;
struct st_sensor_odr odr;
struct st_sensor_power pw;
struct st_sensor_axis enable_axis;
struct st_sensor_fullscale fs;
struct st_sensor_bdu bdu;
struct st_sensor_das das;
struct st_sensor_data_ready_irq drdy_irq;
struct st_sensor_sim sim;
bool multi_read_bit;
unsigned int bootime;
};
/**
* struct st_sensor_data - ST sensor device status
* @trig: The trigger in use by the core driver.
* @mount_matrix: The mounting matrix of the sensor.
* @sensor_settings: Pointer to the specific sensor settings in use.
* @current_fullscale: Maximum range of measure by the sensor.
* @regmap: Pointer to specific sensor regmap configuration.
* @enabled: Status of the sensor (false->off, true->on).
* @odr: Output data rate of the sensor [Hz].
* num_data_channels: Number of data channels used in buffer.
* @drdy_int_pin: Redirect DRDY on pin 1 (1) or pin 2 (2).
* @int_pin_open_drain: Set the interrupt/DRDY to open drain.
* @irq: the IRQ number.
* @edge_irq: the IRQ triggers on edges and need special handling.
* @hw_irq_trigger: if we're using the hardware interrupt on the sensor.
* @hw_timestamp: Latest timestamp from the interrupt handler, when in use.
* @buffer_data: Data used by buffer part.
* @odr_lock: Local lock for preventing concurrent ODR accesses/changes
*/
struct st_sensor_data {
struct iio_trigger *trig;
struct iio_mount_matrix mount_matrix;
struct st_sensor_settings *sensor_settings;
struct st_sensor_fullscale_avl *current_fullscale;
struct regmap *regmap;
bool enabled;
unsigned int odr;
unsigned int num_data_channels;
u8 drdy_int_pin;
bool int_pin_open_drain;
int irq;
bool edge_irq;
bool hw_irq_trigger;
s64 hw_timestamp;
struct mutex odr_lock;
char buffer_data[ST_SENSORS_MAX_BUFFER_SIZE] __aligned(IIO_DMA_MINALIGN);
};
#ifdef CONFIG_IIO_BUFFER
irqreturn_t st_sensors_trigger_handler(int irq, void *p);
#endif
#ifdef CONFIG_IIO_TRIGGER
int st_sensors_allocate_trigger(struct iio_dev *indio_dev,
const struct iio_trigger_ops *trigger_ops);
int st_sensors_validate_device(struct iio_trigger *trig,
struct iio_dev *indio_dev);
#else
static inline int st_sensors_allocate_trigger(struct iio_dev *indio_dev,
const struct iio_trigger_ops *trigger_ops)
{
return 0;
}
#define st_sensors_validate_device NULL
#endif
int st_sensors_init_sensor(struct iio_dev *indio_dev,
struct st_sensors_platform_data *pdata);
int st_sensors_set_enable(struct iio_dev *indio_dev, bool enable);
int st_sensors_set_axis_enable(struct iio_dev *indio_dev, u8 axis_enable);
int st_sensors_power_enable(struct iio_dev *indio_dev);
int st_sensors_debugfs_reg_access(struct iio_dev *indio_dev,
unsigned reg, unsigned writeval,
unsigned *readval);
int st_sensors_set_odr(struct iio_dev *indio_dev, unsigned int odr);
int st_sensors_set_dataready_irq(struct iio_dev *indio_dev, bool enable);
int st_sensors_set_fullscale_by_gain(struct iio_dev *indio_dev, int scale);
int st_sensors_read_info_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *ch, int *val);
int st_sensors_get_settings_index(const char *name,
const struct st_sensor_settings *list,
const int list_length);
int st_sensors_verify_id(struct iio_dev *indio_dev);
ssize_t st_sensors_sysfs_sampling_frequency_avail(struct device *dev,
struct device_attribute *attr, char *buf);
ssize_t st_sensors_sysfs_scale_avail(struct device *dev,
struct device_attribute *attr, char *buf);
void st_sensors_dev_name_probe(struct device *dev, char *name, int len);
/* Accelerometer */
const struct st_sensor_settings *st_accel_get_settings(const char *name);
int st_accel_common_probe(struct iio_dev *indio_dev);
/* Gyroscope */
const struct st_sensor_settings *st_gyro_get_settings(const char *name);
int st_gyro_common_probe(struct iio_dev *indio_dev);
/* Magnetometer */
const struct st_sensor_settings *st_magn_get_settings(const char *name);
int st_magn_common_probe(struct iio_dev *indio_dev);
/* Pressure */
const struct st_sensor_settings *st_press_get_settings(const char *name);
int st_press_common_probe(struct iio_dev *indio_dev);
#endif /* ST_SENSORS_H */