// SPDX-License-Identifier: GPL-2.0-only OR MIT
//
// Analog Devices' SSM3515 audio amp driver
//
// Copyright (C) The Asahi Linux Contributors
#include <linux/bits.h>
#include <linux/bitfield.h>
#include <linux/device.h>
#include <linux/i2c.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/regmap.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <sound/soc.h>
#include <sound/tlv.h>
#define SSM3515_PWR 0x00
#define SSM3515_PWR_APWDN_EN BIT(7)
#define SSM3515_PWR_BSNS_PWDN BIT(6)
#define SSM3515_PWR_S_RST BIT(1)
#define SSM3515_PWR_SPWDN BIT(0)
#define SSM3515_GEC 0x01
#define SSM3515_GEC_EDGE BIT(4)
#define SSM3515_GEC_EDGE_SHIFT 4
#define SSM3515_GEC_ANA_GAIN GENMASK(1, 0)
#define SSM3515_DAC 0x02
#define SSM3515_DAC_HV BIT(7)
#define SSM3515_DAC_MUTE BIT(6)
#define SSM3515_DAC_HPF BIT(5)
#define SSM3515_DAC_LPM BIT(4)
#define SSM3515_DAC_FS GENMASK(2, 0)
#define SSM3515_DAC_VOL 0x03
#define SSM3515_SAI1 0x04
#define SSM3515_SAI1_DAC_POL BIT(7)
#define SSM3515_SAI1_BCLK_POL BIT(6)
#define SSM3515_SAI1_TDM_BCLKS GENMASK(5, 3)
#define SSM3515_SAI1_FSYNC_MODE BIT(2)
#define SSM3515_SAI1_SDATA_FMT BIT(1)
#define SSM3515_SAI1_SAI_MODE BIT(0)
#define SSM3515_SAI2 0x05
#define SSM3515_SAI2_DATA_WIDTH BIT(7)
#define SSM3515_SAI2_AUTO_SLOT BIT(4)
#define SSM3515_SAI2_TDM_SLOT GENMASK(3, 0)
#define SSM3515_VBAT_OUT 0x06
#define SSM3515_STATUS 0x0a
#define SSM3515_STATUS_UVLO_REG BIT(6)
#define SSM3515_STATUS_LIM_EG BIT(5)
#define SSM3515_STATUS_CLIP BIT(4)
#define SSM3515_STATUS_AMP_OC BIT(3)
#define SSM3515_STATUS_OTF BIT(2)
#define SSM3515_STATUS_OTW BIT(1)
#define SSM3515_STATUS_BAT_WARN BIT(0)
static bool ssm3515_volatile_reg(struct device *dev, unsigned int reg)
{
switch (reg) {
case SSM3515_STATUS:
case SSM3515_VBAT_OUT:
return true;
default:
return false;
}
}
static const struct reg_default ssm3515_reg_defaults[] = {
{ SSM3515_PWR, 0x81 },
{ SSM3515_GEC, 0x01 },
{ SSM3515_DAC, 0x32 },
{ SSM3515_DAC_VOL, 0x40 },
{ SSM3515_SAI1, 0x11 },
{ SSM3515_SAI2, 0x00 },
};
static const struct regmap_config ssm3515_i2c_regmap = {
.reg_bits = 8,
.val_bits = 8,
.volatile_reg = ssm3515_volatile_reg,
.max_register = 0xb,
.reg_defaults = ssm3515_reg_defaults,
.num_reg_defaults = ARRAY_SIZE(ssm3515_reg_defaults),
.cache_type = REGCACHE_FLAT,
};
struct ssm3515_data {
struct device *dev;
struct regmap *regmap;
};
// The specced range is -71.25...24.00 dB with step size of 0.375 dB,
// and a mute item below that. This is represented by -71.62...24.00 dB
// with the mute item mapped onto the low end.
static DECLARE_TLV_DB_MINMAX_MUTE(ssm3515_dac_volume, -7162, 2400);
static const char * const ssm3515_ana_gain_text[] = {
"8.4 V Span", "12.6 V Span", "14 V Span", "15 V Span",
};
static SOC_ENUM_SINGLE_DECL(ssm3515_ana_gain_enum, SSM3515_GEC,
__bf_shf(SSM3515_GEC_ANA_GAIN),
ssm3515_ana_gain_text);
static const struct snd_kcontrol_new ssm3515_snd_controls[] = {
SOC_SINGLE_TLV("DAC Playback Volume", SSM3515_DAC_VOL,
0, 255, 1, ssm3515_dac_volume),
SOC_SINGLE("Low EMI Mode Switch", SSM3515_GEC,
__bf_shf(SSM3515_GEC_EDGE), 1, 0),
SOC_SINGLE("Soft Volume Ramping Switch", SSM3515_DAC,
__bf_shf(SSM3515_DAC_HV), 1, 1),
SOC_SINGLE("HPF Switch", SSM3515_DAC,
__bf_shf(SSM3515_DAC_HPF), 1, 0),
SOC_SINGLE("DAC Invert Switch", SSM3515_SAI1,
__bf_shf(SSM3515_SAI1_DAC_POL), 1, 0),
SOC_ENUM("DAC Analog Gain Select", ssm3515_ana_gain_enum),
};
static void ssm3515_read_faults(struct snd_soc_component *component)
{
int ret;
ret = snd_soc_component_read(component, SSM3515_STATUS);
if (ret <= 0) {
/*
* If the read was erroneous, ASoC core has printed a message,
* and that's all that's appropriate in handling the error here.
*/
return;
}
dev_err(component->dev, "device reports:%s%s%s%s%s%s%s\n",
FIELD_GET(SSM3515_STATUS_UVLO_REG, ret) ? " voltage regulator fault" : "",
FIELD_GET(SSM3515_STATUS_LIM_EG, ret) ? " limiter engaged" : "",
FIELD_GET(SSM3515_STATUS_CLIP, ret) ? " clipping detected" : "",
FIELD_GET(SSM3515_STATUS_AMP_OC, ret) ? " amp over-current fault" : "",
FIELD_GET(SSM3515_STATUS_OTF, ret) ? " overtemperature fault" : "",
FIELD_GET(SSM3515_STATUS_OTW, ret) ? " overtemperature warning" : "",
FIELD_GET(SSM3515_STATUS_BAT_WARN, ret) ? " bat voltage low warning" : "");
}
static int ssm3515_probe(struct snd_soc_component *component)
{
int ret;
/* Start out muted */
ret = snd_soc_component_update_bits(component, SSM3515_DAC,
SSM3515_DAC_MUTE, SSM3515_DAC_MUTE);
if (ret < 0)
return ret;
/* Disable the 'master power-down' */
ret = snd_soc_component_update_bits(component, SSM3515_PWR,
SSM3515_PWR_SPWDN, 0);
if (ret < 0)
return ret;
return 0;
}
static int ssm3515_mute(struct snd_soc_dai *dai, int mute, int direction)
{
int ret;
ret = snd_soc_component_update_bits(dai->component,
SSM3515_DAC,
SSM3515_DAC_MUTE,
FIELD_PREP(SSM3515_DAC_MUTE, mute));
if (ret < 0)
return ret;
return 0;
}
static int ssm3515_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params,
struct snd_soc_dai *dai)
{
struct snd_soc_component *component = dai->component;
int ret, rateval;
switch (params_format(params)) {
case SNDRV_PCM_FORMAT_S16:
case SNDRV_PCM_FORMAT_S24:
ret = snd_soc_component_update_bits(component,
SSM3515_SAI2, SSM3515_SAI2_DATA_WIDTH,
FIELD_PREP(SSM3515_SAI2_DATA_WIDTH,
params_width(params) == 16));
if (ret < 0)
return ret;
break;
default:
return -EINVAL;
}
switch (params_rate(params)) {
case 8000 ... 12000:
rateval = 0;
break;
case 16000 ... 24000:
rateval = 1;
break;
case 32000 ... 48000:
rateval = 2;
break;
case 64000 ... 96000:
rateval = 3;
break;
case 128000 ... 192000:
rateval = 4;
break;
case 48001 ... 63999: /* this is ...72000 but overlaps */
rateval = 5;
break;
default:
return -EINVAL;
}
ret = snd_soc_component_update_bits(component,
SSM3515_DAC, SSM3515_DAC_FS,
FIELD_PREP(SSM3515_DAC_FS, rateval));
if (ret < 0)
return ret;
return 0;
}
static int ssm3515_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
{
struct snd_soc_component *component = dai->component;
bool fpol_inv = false; /* non-inverted: frame starts with low-to-high FSYNC */
int ret;
u8 sai1 = 0;
switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
case SND_SOC_DAIFMT_IB_NF:
case SND_SOC_DAIFMT_IB_IF:
sai1 |= SSM3515_SAI1_BCLK_POL;
break;
}
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
case SND_SOC_DAIFMT_I2S:
fpol_inv = 1;
sai1 &= ~SSM3515_SAI1_SDATA_FMT; /* 1 bit start delay */
break;
case SND_SOC_DAIFMT_LEFT_J:
fpol_inv = 0;
sai1 |= SSM3515_SAI1_SDATA_FMT; /* no start delay */
break;
default:
return -EINVAL;
}
switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
case SND_SOC_DAIFMT_NB_IF:
case SND_SOC_DAIFMT_IB_IF:
fpol_inv ^= 1;
break;
}
/* Set the serial input to 'TDM mode' */
sai1 |= SSM3515_SAI1_SAI_MODE;
if (fpol_inv) {
/*
* We configure the codec in a 'TDM mode', in which the
* FSYNC_MODE bit of SAI1 is supposed to select between
* what the datasheet calls 'Pulsed FSYNC mode' and '50%
* FSYNC mode'.
*
* Experiments suggest that this bit in fact simply selects
* the FSYNC polarity, so go with that.
*/
sai1 |= SSM3515_SAI1_FSYNC_MODE;
}
ret = snd_soc_component_update_bits(component, SSM3515_SAI1,
SSM3515_SAI1_BCLK_POL | SSM3515_SAI1_SDATA_FMT |
SSM3515_SAI1_SAI_MODE | SSM3515_SAI1_FSYNC_MODE, sai1);
if (ret < 0)
return ret;
return 0;
}
static int ssm3515_set_tdm_slot(struct snd_soc_dai *dai,
unsigned int tx_mask,
unsigned int rx_mask,
int slots, int slot_width)
{
struct snd_soc_component *component = dai->component;
int slot, tdm_bclks_val, ret;
if (tx_mask == 0 || rx_mask != 0)
return -EINVAL;
slot = __ffs(tx_mask);
if (tx_mask & ~BIT(slot))
return -EINVAL;
switch (slot_width) {
case 16:
tdm_bclks_val = 0;
break;
case 24:
tdm_bclks_val = 1;
break;
case 32:
tdm_bclks_val = 2;
break;
case 48:
tdm_bclks_val = 3;
break;
case 64:
tdm_bclks_val = 4;
break;
default:
return -EINVAL;
}
ret = snd_soc_component_update_bits(component, SSM3515_SAI1,
SSM3515_SAI1_TDM_BCLKS,
FIELD_PREP(SSM3515_SAI1_TDM_BCLKS, tdm_bclks_val));
if (ret < 0)
return ret;
ret = snd_soc_component_update_bits(component, SSM3515_SAI2,
SSM3515_SAI2_TDM_SLOT,
FIELD_PREP(SSM3515_SAI2_TDM_SLOT, slot));
if (ret < 0)
return ret;
return 0;
}
static int ssm3515_hw_free(struct snd_pcm_substream *substream,
struct snd_soc_dai *dai)
{
/*
* We don't get live notification of faults, so at least at
* this time, when playback is over, check if we have tripped
* over anything and if so, log it.
*/
ssm3515_read_faults(dai->component);
return 0;
}
static const struct snd_soc_dai_ops ssm3515_dai_ops = {
.mute_stream = ssm3515_mute,
.hw_params = ssm3515_hw_params,
.set_fmt = ssm3515_set_fmt,
.set_tdm_slot = ssm3515_set_tdm_slot,
.hw_free = ssm3515_hw_free,
};
static struct snd_soc_dai_driver ssm3515_dai_driver = {
.name = "SSM3515 SAI",
.id = 0,
.playback = {
.stream_name = "Playback",
.channels_min = 1,
.channels_max = 1,
.rates = SNDRV_PCM_RATE_CONTINUOUS,
.formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S24_LE,
},
.ops = &ssm3515_dai_ops,
};
static const struct snd_soc_dapm_widget ssm3515_dapm_widgets[] = {
SND_SOC_DAPM_DAC("DAC", NULL, SND_SOC_NOPM, 0, 0),
SND_SOC_DAPM_OUTPUT("OUT"),
};
static const struct snd_soc_dapm_route ssm3515_dapm_routes[] = {
{"OUT", NULL, "DAC"},
{"DAC", NULL, "Playback"},
};
static const struct snd_soc_component_driver ssm3515_asoc_component = {
.probe = ssm3515_probe,
.controls = ssm3515_snd_controls,
.num_controls = ARRAY_SIZE(ssm3515_snd_controls),
.dapm_widgets = ssm3515_dapm_widgets,
.num_dapm_widgets = ARRAY_SIZE(ssm3515_dapm_widgets),
.dapm_routes = ssm3515_dapm_routes,
.num_dapm_routes = ARRAY_SIZE(ssm3515_dapm_routes),
.endianness = 1,
};
static int ssm3515_i2c_probe(struct i2c_client *client)
{
struct ssm3515_data *data;
int ret;
data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL);
if (!data)
return -ENOMEM;
data->dev = &client->dev;
i2c_set_clientdata(client, data);
data->regmap = devm_regmap_init_i2c(client, &ssm3515_i2c_regmap);
if (IS_ERR(data->regmap))
return dev_err_probe(data->dev, PTR_ERR(data->regmap),
"initializing register map\n");
/* Perform a reset */
ret = regmap_update_bits(data->regmap, SSM3515_PWR,
SSM3515_PWR_S_RST, SSM3515_PWR_S_RST);
if (ret < 0)
return dev_err_probe(data->dev, ret,
"performing software reset\n");
regmap_reinit_cache(data->regmap, &ssm3515_i2c_regmap);
return devm_snd_soc_register_component(data->dev,
&ssm3515_asoc_component,
&ssm3515_dai_driver, 1);
}
static const struct of_device_id ssm3515_of_match[] = {
{ .compatible = "adi,ssm3515" },
{}
};
MODULE_DEVICE_TABLE(of, ssm3515_of_match);
static struct i2c_driver ssm3515_i2c_driver = {
.driver = {
.name = "ssm3515",
.of_match_table = ssm3515_of_match,
},
.probe = ssm3515_i2c_probe,
};
module_i2c_driver(ssm3515_i2c_driver);
MODULE_AUTHOR("Martin PoviĊĦer <[email protected]>");
MODULE_DESCRIPTION("ASoC SSM3515 audio amp driver");
MODULE_LICENSE("Dual MIT/GPL");