/* SPDX-License-Identifier: GPL-2.0+ */
/*
* include/linux/atmel_serial.h
*
* Copyright (C) 2005 Ivan Kokshaysky
* Copyright (C) SAN People
*
* USART registers.
* Based on AT91RM9200 datasheet revision E.
*/
#include <linux/bitfield.h>
#ifndef ATMEL_SERIAL_H
#define ATMEL_SERIAL_H
#define ATMEL_US_CR 0x00 /* Control Register */
#define ATMEL_US_RSTRX BIT(2) /* Reset Receiver */
#define ATMEL_US_RSTTX BIT(3) /* Reset Transmitter */
#define ATMEL_US_RXEN BIT(4) /* Receiver Enable */
#define ATMEL_US_RXDIS BIT(5) /* Receiver Disable */
#define ATMEL_US_TXEN BIT(6) /* Transmitter Enable */
#define ATMEL_US_TXDIS BIT(7) /* Transmitter Disable */
#define ATMEL_US_RSTSTA BIT(8) /* Reset Status Bits */
#define ATMEL_US_STTBRK BIT(9) /* Start Break */
#define ATMEL_US_STPBRK BIT(10) /* Stop Break */
#define ATMEL_US_STTTO BIT(11) /* Start Time-out */
#define ATMEL_US_SENDA BIT(12) /* Send Address */
#define ATMEL_US_RSTIT BIT(13) /* Reset Iterations */
#define ATMEL_US_RSTNACK BIT(14) /* Reset Non Acknowledge */
#define ATMEL_US_RETTO BIT(15) /* Rearm Time-out */
#define ATMEL_US_DTREN BIT(16) /* Data Terminal Ready Enable */
#define ATMEL_US_DTRDIS BIT(17) /* Data Terminal Ready Disable */
#define ATMEL_US_RTSEN BIT(18) /* Request To Send Enable */
#define ATMEL_US_RTSDIS BIT(19) /* Request To Send Disable */
#define ATMEL_US_TXFCLR BIT(24) /* Transmit FIFO Clear */
#define ATMEL_US_RXFCLR BIT(25) /* Receive FIFO Clear */
#define ATMEL_US_TXFLCLR BIT(26) /* Transmit FIFO Lock Clear */
#define ATMEL_US_FIFOEN BIT(30) /* FIFO enable */
#define ATMEL_US_FIFODIS BIT(31) /* FIFO disable */
#define ATMEL_US_MR 0x04 /* Mode Register */
#define ATMEL_US_USMODE GENMASK(3, 0) /* Mode of the USART */
#define ATMEL_US_USMODE_NORMAL FIELD_PREP(ATMEL_US_USMODE, 0)
#define ATMEL_US_USMODE_RS485 FIELD_PREP(ATMEL_US_USMODE, 1)
#define ATMEL_US_USMODE_HWHS FIELD_PREP(ATMEL_US_USMODE, 2)
#define ATMEL_US_USMODE_MODEM FIELD_PREP(ATMEL_US_USMODE, 3)
#define ATMEL_US_USMODE_ISO7816_T0 FIELD_PREP(ATMEL_US_USMODE, 4)
#define ATMEL_US_USMODE_ISO7816_T1 FIELD_PREP(ATMEL_US_USMODE, 6)
#define ATMEL_US_USMODE_IRDA FIELD_PREP(ATMEL_US_USMODE, 8)
#define ATMEL_US_USCLKS GENMASK(5, 4) /* Clock Selection */
#define ATMEL_US_USCLKS_MCK FIELD_PREP(ATMEL_US_USCLKS, 0)
#define ATMEL_US_USCLKS_MCK_DIV8 FIELD_PREP(ATMEL_US_USCLKS, 1)
#define ATMEL_US_USCLKS_GCLK FIELD_PREP(ATMEL_US_USCLKS, 2)
#define ATMEL_US_USCLKS_SCK FIELD_PREP(ATMEL_US_USCLKS, 3)
#define ATMEL_UA_FILTER BIT(4)
#define ATMEL_US_CHRL GENMASK(7, 6) /* Character Length */
#define ATMEL_US_CHRL_5 FIELD_PREP(ATMEL_US_CHRL, 0)
#define ATMEL_US_CHRL_6 FIELD_PREP(ATMEL_US_CHRL, 1)
#define ATMEL_US_CHRL_7 FIELD_PREP(ATMEL_US_CHRL, 2)
#define ATMEL_US_CHRL_8 FIELD_PREP(ATMEL_US_CHRL, 3)
#define ATMEL_US_SYNC BIT(8) /* Synchronous Mode Select */
#define ATMEL_US_PAR GENMASK(11, 9) /* Parity Type */
#define ATMEL_US_PAR_EVEN FIELD_PREP(ATMEL_US_PAR, 0)
#define ATMEL_US_PAR_ODD FIELD_PREP(ATMEL_US_PAR, 1)
#define ATMEL_US_PAR_SPACE FIELD_PREP(ATMEL_US_PAR, 2)
#define ATMEL_US_PAR_MARK FIELD_PREP(ATMEL_US_PAR, 3)
#define ATMEL_US_PAR_NONE FIELD_PREP(ATMEL_US_PAR, 4)
#define ATMEL_US_PAR_MULTI_DROP FIELD_PREP(ATMEL_US_PAR, 6)
#define ATMEL_US_NBSTOP GENMASK(13, 12) /* Number of Stop Bits */
#define ATMEL_US_NBSTOP_1 FIELD_PREP(ATMEL_US_NBSTOP, 0)
#define ATMEL_US_NBSTOP_1_5 FIELD_PREP(ATMEL_US_NBSTOP, 1)
#define ATMEL_US_NBSTOP_2 FIELD_PREP(ATMEL_US_NBSTOP, 2)
#define ATMEL_UA_BRSRCCK BIT(12) /* Clock Selection for UART */
#define ATMEL_US_CHMODE GENMASK(15, 14) /* Channel Mode */
#define ATMEL_US_CHMODE_NORMAL FIELD_PREP(ATMEL_US_CHMODE, 0)
#define ATMEL_US_CHMODE_ECHO FIELD_PREP(ATMEL_US_CHMODE, 1)
#define ATMEL_US_CHMODE_LOC_LOOP FIELD_PREP(ATMEL_US_CHMODE, 2)
#define ATMEL_US_CHMODE_REM_LOOP FIELD_PREP(ATMEL_US_CHMODE, 3)
#define ATMEL_US_MSBF BIT(16) /* Bit Order */
#define ATMEL_US_MODE9 BIT(17) /* 9-bit Character Length */
#define ATMEL_US_CLKO BIT(18) /* Clock Output Select */
#define ATMEL_US_OVER BIT(19) /* Oversampling Mode */
#define ATMEL_US_INACK BIT(20) /* Inhibit Non Acknowledge */
#define ATMEL_US_DSNACK BIT(21) /* Disable Successive NACK */
#define ATMEL_US_MAX_ITER_MASK GENMASK(26, 24) /* Max Iterations */
#define ATMEL_US_MAX_ITER(n) FIELD_PREP(ATMEL_US_MAX_ITER_MASK, (n))
#define ATMEL_US_FILTER BIT(28) /* Infrared Receive Line Filter */
#define ATMEL_US_IER 0x08 /* Interrupt Enable Register */
#define ATMEL_US_RXRDY BIT(0) /* Receiver Ready */
#define ATMEL_US_TXRDY BIT(1) /* Transmitter Ready */
#define ATMEL_US_RXBRK BIT(2) /* Break Received / End of Break */
#define ATMEL_US_ENDRX BIT(3) /* End of Receiver Transfer */
#define ATMEL_US_ENDTX BIT(4) /* End of Transmitter Transfer */
#define ATMEL_US_OVRE BIT(5) /* Overrun Error */
#define ATMEL_US_FRAME BIT(6) /* Framing Error */
#define ATMEL_US_PARE BIT(7) /* Parity Error */
#define ATMEL_US_TIMEOUT BIT(8) /* Receiver Time-out */
#define ATMEL_US_TXEMPTY BIT(9) /* Transmitter Empty */
#define ATMEL_US_ITERATION BIT(10) /* Max number of Repetitions Reached */
#define ATMEL_US_TXBUFE BIT(11) /* Transmission Buffer Empty */
#define ATMEL_US_RXBUFF BIT(12) /* Reception Buffer Full */
#define ATMEL_US_NACK BIT(13) /* Non Acknowledge */
#define ATMEL_US_RIIC BIT(16) /* Ring Indicator Input Change */
#define ATMEL_US_DSRIC BIT(17) /* Data Set Ready Input Change */
#define ATMEL_US_DCDIC BIT(18) /* Data Carrier Detect Input Change */
#define ATMEL_US_CTSIC BIT(19) /* Clear to Send Input Change */
#define ATMEL_US_RI BIT(20) /* RI */
#define ATMEL_US_DSR BIT(21) /* DSR */
#define ATMEL_US_DCD BIT(22) /* DCD */
#define ATMEL_US_CTS BIT(23) /* CTS */
#define ATMEL_US_IDR 0x0c /* Interrupt Disable Register */
#define ATMEL_US_IMR 0x10 /* Interrupt Mask Register */
#define ATMEL_US_CSR 0x14 /* Channel Status Register */
#define ATMEL_US_RHR 0x18 /* Receiver Holding Register */
#define ATMEL_US_THR 0x1c /* Transmitter Holding Register */
#define ATMEL_US_SYNH BIT(15) /* Transmit/Receive Sync */
#define ATMEL_US_BRGR 0x20 /* Baud Rate Generator Register */
#define ATMEL_US_CD GENMASK(15, 0) /* Clock Divider */
#define ATMEL_US_FP_OFFSET 16 /* Fractional Part */
#define ATMEL_US_FP_MASK 0x7
#define ATMEL_US_RTOR 0x24 /* Receiver Time-out Register for USART */
#define ATMEL_UA_RTOR 0x28 /* Receiver Time-out Register for UART */
#define ATMEL_US_TO GENMASK(15, 0) /* Time-out Value */
#define ATMEL_US_TTGR 0x28 /* Transmitter Timeguard Register */
#define ATMEL_US_TG GENMASK(7, 0) /* Timeguard Value */
#define ATMEL_US_FIDI 0x40 /* FI DI Ratio Register */
#define ATMEL_US_NER 0x44 /* Number of Errors Register */
#define ATMEL_US_IF 0x4c /* IrDA Filter Register */
#define ATMEL_US_CMPR 0x90 /* Comparaison Register */
#define ATMEL_US_FMR 0xa0 /* FIFO Mode Register */
#define ATMEL_US_TXRDYM(data) FIELD_PREP(GENMASK(1, 0), (data)) /* TX Ready Mode */
#define ATMEL_US_RXRDYM(data) FIELD_PREP(GENMASK(5, 4), (data)) /* RX Ready Mode */
#define ATMEL_US_ONE_DATA 0x0
#define ATMEL_US_TWO_DATA 0x1
#define ATMEL_US_FOUR_DATA 0x2
#define ATMEL_US_FRTSC BIT(7) /* FIFO RTS pin Control */
#define ATMEL_US_TXFTHRES(thr) FIELD_PREP(GENMASK(13, 8), (thr)) /* TX FIFO Threshold */
#define ATMEL_US_RXFTHRES(thr) FIELD_PREP(GENMASK(21, 16), (thr)) /* RX FIFO Threshold */
#define ATMEL_US_RXFTHRES2(thr) FIELD_PREP(GENMASK(29, 24), (thr)) /* RX FIFO Threshold2 */
#define ATMEL_US_FLR 0xa4 /* FIFO Level Register */
#define ATMEL_US_TXFL(reg) FIELD_GET(GENMASK(5, 0), (reg)) /* TX FIFO Level */
#define ATMEL_US_RXFL(reg) FIELD_GET(GENMASK(21, 16), (reg)) /* RX FIFO Level */
#define ATMEL_US_FIER 0xa8 /* FIFO Interrupt Enable Register */
#define ATMEL_US_FIDR 0xac /* FIFO Interrupt Disable Register */
#define ATMEL_US_FIMR 0xb0 /* FIFO Interrupt Mask Register */
#define ATMEL_US_FESR 0xb4 /* FIFO Event Status Register */
#define ATMEL_US_TXFEF BIT(0) /* Transmit FIFO Empty Flag */
#define ATMEL_US_TXFFF BIT(1) /* Transmit FIFO Full Flag */
#define ATMEL_US_TXFTHF BIT(2) /* Transmit FIFO Threshold Flag */
#define ATMEL_US_RXFEF BIT(3) /* Receive FIFO Empty Flag */
#define ATMEL_US_RXFFF BIT(4) /* Receive FIFO Full Flag */
#define ATMEL_US_RXFTHF BIT(5) /* Receive FIFO Threshold Flag */
#define ATMEL_US_TXFPTEF BIT(6) /* Transmit FIFO Pointer Error Flag */
#define ATMEL_US_RXFPTEF BIT(7) /* Receive FIFO Pointer Error Flag */
#define ATMEL_US_TXFLOCK BIT(8) /* Transmit FIFO Lock (FESR only) */
#define ATMEL_US_RXFTHF2 BIT(9) /* Receive FIFO Threshold Flag 2 */
#define ATMEL_US_NAME 0xf0 /* Ip Name */
#define ATMEL_US_VERSION 0xfc /* Ip Version */
#endif
Codebase Browser
linux