# Copyright (c) 2012 Google Inc. All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are
# met:
#
# * Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# * Redistributions in binary form must reproduce the above
# copyright notice, this list of conditions and the following disclaimer
# in the documentation and/or other materials provided with the
# distribution.
# * Neither the name of Google Inc. nor the names of its
# contributors may be used to endorse or promote products derived from
# this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
[MASTER]
# Specify a configuration file.
#rcfile=
# Python code to execute, usually for sys.path manipulation such as
# pygtk.require().
#init-hook=
# Profiled execution.
profile=no
# Add files or directories to the ignorelist. They should be base names, not
# paths.
ignore=CVS
# Pickle collected data for later comparisons.
persistent=yes
# List of plugins (as comma separated values of python modules names) to load,
# usually to register additional checkers.
load-plugins=
[MESSAGES CONTROL]
# Enable the message, report, category or checker with the given id(s). You can
# either give multiple identifier separated by comma (,) or put this option
# multiple time.
#enable=
# Disable the message, report, category or checker with the given id(s). You
# can either give multiple identifier separated by comma (,) or put this option
# multiple time (only on the command line, not in the configuration file where
# it should appear only once).
# CHANGED:
# The "design" disable below disables all of the "too-many-*" checks,
# e.g. too-many-arguments, too-many-branches.
#disable=
# design,
# missing-docstring,
# locally-disabled,
# locally-enabled,
# star-args,
# wildcard-import,
# fixme,
# global-statement,
# no-self-use,
# TODO(crbug.com/1351132): pylint has been broken for a while. For now, only
# flag errors and above that will stop programs from running. Gradually fix
# warnings in follow-up changes.
disable=
C,
R,
W,
# Many packages become available at runtime by manipulating `sys.path`.
import-error,
# Allow dynamically created attributes.
no-member,
enable=
unused-import
[REPORTS]
# Set the output format. Available formats are text, parseable, colorized, msvs
# (visual studio) and html.
output-format=text
# Put messages in a separate file for each module / package specified on the
# command line instead of printing them on stdout. Reports (if any) will be
# written in a file name "pylint_global.[txt|html]".
files-output=no
# Tells whether to display a full report or only the messages.
reports=no
# Python expression which should return a note less than 10 (10 is the highest
# note). You have access to the variables errors warning, statement which
# respectively contain the number of errors / warnings messages and the total
# number of statements analyzed. This is used by the global evaluation report
# (RP0004).
evaluation=10.0 - ((float(5 * error + warning + refactor + convention) / statement) * 10)
# Add a comment according to your evaluation note. This is used by the global
# evaluation report (RP0004).
comment=no
[VARIABLES]
# Tells whether we should check for unused import in __init__ files.
init-import=no
# A regular expression matching the beginning of the name of dummy variables
# (i.e. not used).
dummy-variables-rgx=_|dummy
# List of additional names supposed to be defined in builtins. Remember that
# you should avoid to define new builtins when possible.
additional-builtins=
[TYPECHECK]
# Tells whether missing members accessed in mixin class should be ignored. A
# mixin class is detected if its name ends with "mixin" (case insensitive).
ignore-mixin-members=yes
# List of classes names for which member attributes should not be checked
# (useful for classes with attributes dynamically set).
ignored-classes=SQLObject,twisted.internet.reactor,hashlib,google.appengine.api.memcache
# When zope mode is activated, add a predefined set of Zope acquired attributes
# to generated-members.
zope=no
# List of members which are set dynamically and missed by pylint inference
# system, and so shouldn't trigger E0201 when accessed. Python regular
# expressions are accepted.
generated-members=REQUEST,acl_users,aq_parent
[MISCELLANEOUS]
# List of note tags to take in consideration, separated by a comma.
notes=FIXME,XXX,TODO
[SIMILARITIES]
# Minimum lines number of a similarity.
min-similarity-lines=4
# Ignore comments when computing similarities.
ignore-comments=yes
# Ignore docstrings when computing similarities.
ignore-docstrings=yes
[FORMAT]
# Maximum number of characters on a single line.
max-line-length=132
# Maximum number of lines in a module.
max-module-lines=4000
# String used as indentation unit.
indent-string=' '
[BASIC]
# Required attributes for module, separated by a comma.
required-attributes=
# List of builtins function names that should not be used, separated by a comma.
bad-functions=apply
# Regular expression which should only match correct module names.
module-rgx=(([a-z_][a-z0-9_]*)|([A-Z][a-zA-Z0-9]+)|([a-z-][a-z0-9-]*))$
# Regular expression which should only match correct module level names.
const-rgx=(([A-Z_][A-Z0-9_]*)|(__.*__))$
# Regular expression which should only match correct class names.
class-rgx=[A-Z_][a-zA-Z0-9]+$
# Regular expression which should only match correct function names
function-rgx=[a-z_][a-z0-9_]{2,60}$
# Regular expression which should only match correct method names
method-rgx=[a-z_][a-z0-9_]{2,60}$
# Regular expression which should only match correct instance attribute names.
attr-rgx=[a-z_][a-z0-9_]{1,30}$
# Regular expression which should only match correct argument names.
argument-rgx=[a-z_][a-z0-9_]{1,30}$
# Regular expression which should only match correct variable names.
variable-rgx=[a-z_][a-z0-9_]{1,30}$
# Regular expression which should only match correct list comprehension or
# generator expression variable names.
inlinevar-rgx=[A-Za-z_][A-Za-z0-9_]*$
# Good variable names which should always be accepted, separated by a comma.
# These short names are acceptable in the following cases:
# _ - unused value
# i/j/k - for XXX in range():
# k/v - for k, v in x.items():
# x/y/z - coordinates
# e - except XXXError as e:
# f/fd - with open('blah') as f:
# _log/Run - blinkpy functions
good-names=_,i,j,k,v,x,y,z,e,f,fd,_log,Run
# Bad variable names which should always be refused, separated by a comma.
bad-names=foo,bar,baz,toto,tutu,tata
# Regular expression which should only match functions or classes name which do
# not require a docstring.
no-docstring-rgx=__.*__
[DESIGN]
# Maximum number of arguments for function / method.
max-args=5
# Argument names that match this expression will be ignored. Default to name
# with leading underscore.
ignored-argument-names=_.*
# Maximum number of locals for function / method body.
max-locals=15
# Maximum number of return / yield for function / method body.
max-returns=6
# Maximum number of branch for function / method body.
max-branchs=12
# Maximum number of statements in function / method body.
max-statements=50
# Maximum number of parents for a class (see R0901).
max-parents=7
# Maximum number of attributes for a class (see R0902).
max-attributes=7
# Minimum number of public methods for a class (see R0903).
min-public-methods=2
# Maximum number of public methods for a class (see R0904).
max-public-methods=20
[CLASSES]
# List of interface methods to ignore, separated by a comma. This is used for
# instance to not check methods defines in Zope's Interface base class.
ignore-iface-methods=isImplementedBy,deferred,extends,names,namesAndDescriptions,queryDescriptionFor,getBases,getDescriptionFor,getDoc,getName,getTaggedValue,getTaggedValueTags,isEqualOrExtendedBy,setTaggedValue,isImplementedByInstancesOf,adaptWith,is_implemented_by
# List of method names used to declare (i.e. assign) instance attributes.
defining-attr-methods=__init__,__new__,setUp
# List of valid names for the first argument in a class method.
valid-classmethod-first-arg=cls
[IMPORTS]
# Deprecated modules which should not be used, separated by a comma.
deprecated-modules=regsub,string,TERMIOS,Bastion,rexec
# Create a graph of every (i.e. internal and external) dependencies in the
# given file (report RP0402 must not be disabled).
import-graph=
# Create a graph of external dependencies in the given file (report RP0402 must
# not be disabled).
ext-import-graph=
# Create a graph of internal dependencies in the given file (report RP0402 must
# not be disabled).
int-import-graph=
[EXCEPTIONS]
# Exceptions that will emit a warning when being caught. Defaults to
# "Exception".
overgeneral-exceptions=Exception
Codebase Browser
chromium