/*!
Contains architecture independent routines.
These routines are often used as a "fallback" implementation when the more
specialized architecture dependent routines are unavailable.
*/
pub mod memchr;
pub mod packedpair;
pub mod rabinkarp;
#[cfg(feature = "alloc")]
pub mod shiftor;
pub mod twoway;
/// Returns true if and only if `needle` is a prefix of `haystack`.
///
/// This uses a latency optimized variant of `memcmp` internally which *might*
/// make this faster for very short strings.
///
/// # Inlining
///
/// This routine is marked `inline(always)`. If you want to call this function
/// in a way that is not always inlined, you'll need to wrap a call to it in
/// another function that is marked as `inline(never)` or just `inline`.
#[inline(always)]
pub fn is_prefix(haystack: &[u8], needle: &[u8]) -> bool {
needle.len() <= haystack.len()
&& is_equal(&haystack[..needle.len()], needle)
}
/// Returns true if and only if `needle` is a suffix of `haystack`.
///
/// This uses a latency optimized variant of `memcmp` internally which *might*
/// make this faster for very short strings.
///
/// # Inlining
///
/// This routine is marked `inline(always)`. If you want to call this function
/// in a way that is not always inlined, you'll need to wrap a call to it in
/// another function that is marked as `inline(never)` or just `inline`.
#[inline(always)]
pub fn is_suffix(haystack: &[u8], needle: &[u8]) -> bool {
needle.len() <= haystack.len()
&& is_equal(&haystack[haystack.len() - needle.len()..], needle)
}
/// Compare corresponding bytes in `x` and `y` for equality.
///
/// That is, this returns true if and only if `x.len() == y.len()` and
/// `x[i] == y[i]` for all `0 <= i < x.len()`.
///
/// # Inlining
///
/// This routine is marked `inline(always)`. If you want to call this function
/// in a way that is not always inlined, you'll need to wrap a call to it in
/// another function that is marked as `inline(never)` or just `inline`.
///
/// # Motivation
///
/// Why not use slice equality instead? Well, slice equality usually results in
/// a call out to the current platform's `libc` which might not be inlineable
/// or have other overhead. This routine isn't guaranteed to be a win, but it
/// might be in some cases.
#[inline(always)]
pub fn is_equal(x: &[u8], y: &[u8]) -> bool {
if x.len() != y.len() {
return false;
}
// SAFETY: Our pointers are derived directly from borrowed slices which
// uphold all of our safety guarantees except for length. We account for
// length with the check above.
unsafe { is_equal_raw(x.as_ptr(), y.as_ptr(), x.len()) }
}
/// Compare `n` bytes at the given pointers for equality.
///
/// This returns true if and only if `*x.add(i) == *y.add(i)` for all
/// `0 <= i < n`.
///
/// # Inlining
///
/// This routine is marked `inline(always)`. If you want to call this function
/// in a way that is not always inlined, you'll need to wrap a call to it in
/// another function that is marked as `inline(never)` or just `inline`.
///
/// # Motivation
///
/// Why not use slice equality instead? Well, slice equality usually results in
/// a call out to the current platform's `libc` which might not be inlineable
/// or have other overhead. This routine isn't guaranteed to be a win, but it
/// might be in some cases.
///
/// # Safety
///
/// * Both `x` and `y` must be valid for reads of up to `n` bytes.
/// * Both `x` and `y` must point to an initialized value.
/// * Both `x` and `y` must each point to an allocated object and
/// must either be in bounds or at most one byte past the end of the
/// allocated object. `x` and `y` do not need to point to the same allocated
/// object, but they may.
/// * Both `x` and `y` must be _derived from_ a pointer to their respective
/// allocated objects.
/// * The distance between `x` and `x+n` must not overflow `isize`. Similarly
/// for `y` and `y+n`.
/// * The distance being in bounds must not rely on "wrapping around" the
/// address space.
#[inline(always)]
pub unsafe fn is_equal_raw(
mut x: *const u8,
mut y: *const u8,
mut n: usize,
) -> bool {
// When we have 4 or more bytes to compare, then proceed in chunks of 4 at
// a time using unaligned loads.
//
// Also, why do 4 byte loads instead of, say, 8 byte loads? The reason is
// that this particular version of memcmp is likely to be called with tiny
// needles. That means that if we do 8 byte loads, then a higher proportion
// of memcmp calls will use the slower variant above. With that said, this
// is a hypothesis and is only loosely supported by benchmarks. There's
// likely some improvement that could be made here. The main thing here
// though is to optimize for latency, not throughput.
// SAFETY: The caller is responsible for ensuring the pointers we get are
// valid and readable for at least `n` bytes. We also do unaligned loads,
// so there's no need to ensure we're aligned. (This is justified by this
// routine being specifically for short strings.)
while n >= 4 {
let vx = x.cast::<u32>().read_unaligned();
let vy = y.cast::<u32>().read_unaligned();
if vx != vy {
return false;
}
x = x.add(4);
y = y.add(4);
n -= 4;
}
// If we don't have enough bytes to do 4-byte at a time loads, then
// do partial loads. Note that I used to have a byte-at-a-time
// loop here and that turned out to be quite a bit slower for the
// memmem/pathological/defeat-simple-vector-alphabet benchmark.
if n >= 2 {
let vx = x.cast::<u16>().read_unaligned();
let vy = y.cast::<u16>().read_unaligned();
if vx != vy {
return false;
}
x = x.add(2);
y = y.add(2);
n -= 2;
}
if n > 0 {
if x.read() != y.read() {
return false;
}
}
true
}
#[cfg(test)]
mod tests {
use super::*;
#[test]
fn equals_different_lengths() {
assert!(!is_equal(b"", b"a"));
assert!(!is_equal(b"a", b""));
assert!(!is_equal(b"ab", b"a"));
assert!(!is_equal(b"a", b"ab"));
}
#[test]
fn equals_mismatch() {
let one_mismatch = [
(&b"a"[..], &b"x"[..]),
(&b"ab"[..], &b"ax"[..]),
(&b"abc"[..], &b"abx"[..]),
(&b"abcd"[..], &b"abcx"[..]),
(&b"abcde"[..], &b"abcdx"[..]),
(&b"abcdef"[..], &b"abcdex"[..]),
(&b"abcdefg"[..], &b"abcdefx"[..]),
(&b"abcdefgh"[..], &b"abcdefgx"[..]),
(&b"abcdefghi"[..], &b"abcdefghx"[..]),
(&b"abcdefghij"[..], &b"abcdefghix"[..]),
(&b"abcdefghijk"[..], &b"abcdefghijx"[..]),
(&b"abcdefghijkl"[..], &b"abcdefghijkx"[..]),
(&b"abcdefghijklm"[..], &b"abcdefghijklx"[..]),
(&b"abcdefghijklmn"[..], &b"abcdefghijklmx"[..]),
];
for (x, y) in one_mismatch {
assert_eq!(x.len(), y.len(), "lengths should match");
assert!(!is_equal(x, y));
assert!(!is_equal(y, x));
}
}
#[test]
fn equals_yes() {
assert!(is_equal(b"", b""));
assert!(is_equal(b"a", b"a"));
assert!(is_equal(b"ab", b"ab"));
assert!(is_equal(b"abc", b"abc"));
assert!(is_equal(b"abcd", b"abcd"));
assert!(is_equal(b"abcde", b"abcde"));
assert!(is_equal(b"abcdef", b"abcdef"));
assert!(is_equal(b"abcdefg", b"abcdefg"));
assert!(is_equal(b"abcdefgh", b"abcdefgh"));
assert!(is_equal(b"abcdefghi", b"abcdefghi"));
}
#[test]
fn prefix() {
assert!(is_prefix(b"", b""));
assert!(is_prefix(b"a", b""));
assert!(is_prefix(b"ab", b""));
assert!(is_prefix(b"foo", b"foo"));
assert!(is_prefix(b"foobar", b"foo"));
assert!(!is_prefix(b"foo", b"fob"));
assert!(!is_prefix(b"foobar", b"fob"));
}
#[test]
fn suffix() {
assert!(is_suffix(b"", b""));
assert!(is_suffix(b"a", b""));
assert!(is_suffix(b"ab", b""));
assert!(is_suffix(b"foo", b"foo"));
assert!(is_suffix(b"foobar", b"bar"));
assert!(!is_suffix(b"foo", b"goo"));
assert!(!is_suffix(b"foobar", b"gar"));
}
}
Codebase Browser
chromium