use {
anyhow::Result,
regex_automata::{
dfa::{
self, dense, regex::Regex, sparse, Automaton, OverlappingState,
StartKind,
},
nfa::thompson,
util::{prefilter::Prefilter, syntax},
Anchored, Input, PatternSet,
},
regex_test::{
CompiledRegex, Match, RegexTest, SearchKind, Span, TestResult,
TestRunner,
},
};
use crate::{create_input, suite, untestify_kind};
const EXPANSIONS: &[&str] = &["is_match", "find", "which"];
/// Runs the test suite with the default configuration.
#[test]
fn unminimized_default() -> Result<()> {
let builder = Regex::builder();
TestRunner::new()?
.expand(EXPANSIONS, |t| t.compiles())
.blacklist("expensive")
.test_iter(suite()?.iter(), dense_compiler(builder))
.assert();
Ok(())
}
/// Runs the test suite with the default configuration and a prefilter enabled,
/// if one can be built.
#[test]
fn unminimized_prefilter() -> Result<()> {
let my_compiler = |test: &RegexTest, regexes: &[String]| {
// Parse regexes as HIRs so we can get literals to build a prefilter.
let mut hirs = vec![];
for pattern in regexes.iter() {
hirs.push(syntax::parse_with(pattern, &config_syntax(test))?);
}
let kind = match untestify_kind(test.match_kind()) {
None => return Ok(CompiledRegex::skip()),
Some(kind) => kind,
};
let pre = Prefilter::from_hirs_prefix(kind, &hirs);
let mut builder = Regex::builder();
builder.dense(dense::DFA::config().prefilter(pre));
compiler(builder, |_, _, re| {
Ok(CompiledRegex::compiled(move |test| -> TestResult {
run_test(&re, test)
}))
})(test, regexes)
};
TestRunner::new()?
.expand(EXPANSIONS, |t| t.compiles())
.blacklist("expensive")
.test_iter(suite()?.iter(), my_compiler)
.assert();
Ok(())
}
/// Runs the test suite with start states specialized.
#[test]
fn unminimized_specialized_start_states() -> Result<()> {
let mut builder = Regex::builder();
builder.dense(dense::Config::new().specialize_start_states(true));
TestRunner::new()?
.expand(EXPANSIONS, |t| t.compiles())
.blacklist("expensive")
.test_iter(suite()?.iter(), dense_compiler(builder))
.assert();
Ok(())
}
/// Runs the test suite with byte classes disabled.
#[test]
fn unminimized_no_byte_class() -> Result<()> {
let mut builder = Regex::builder();
builder.dense(dense::Config::new().byte_classes(false));
TestRunner::new()?
.expand(EXPANSIONS, |t| t.compiles())
.blacklist("expensive")
.test_iter(suite()?.iter(), dense_compiler(builder))
.assert();
Ok(())
}
/// Runs the test suite with NFA shrinking enabled.
#[test]
fn unminimized_nfa_shrink() -> Result<()> {
let mut builder = Regex::builder();
builder.thompson(thompson::Config::new().shrink(true));
TestRunner::new()?
.expand(EXPANSIONS, |t| t.compiles())
.blacklist("expensive")
.test_iter(suite()?.iter(), dense_compiler(builder))
.assert();
Ok(())
}
/// Runs the test suite on a minimized DFA with an otherwise default
/// configuration.
#[test]
fn minimized_default() -> Result<()> {
let mut builder = Regex::builder();
builder.dense(dense::Config::new().minimize(true));
TestRunner::new()?
.expand(EXPANSIONS, |t| t.compiles())
.blacklist("expensive")
.test_iter(suite()?.iter(), dense_compiler(builder))
.assert();
Ok(())
}
/// Runs the test suite on a minimized DFA with byte classes disabled.
#[test]
fn minimized_no_byte_class() -> Result<()> {
let mut builder = Regex::builder();
builder.dense(dense::Config::new().minimize(true).byte_classes(false));
TestRunner::new()?
.expand(EXPANSIONS, |t| t.compiles())
.blacklist("expensive")
.test_iter(suite()?.iter(), dense_compiler(builder))
.assert();
Ok(())
}
/// Runs the test suite on a sparse unminimized DFA.
#[test]
fn sparse_unminimized_default() -> Result<()> {
let builder = Regex::builder();
TestRunner::new()?
.expand(EXPANSIONS, |t| t.compiles())
.blacklist("expensive")
.test_iter(suite()?.iter(), sparse_compiler(builder))
.assert();
Ok(())
}
/// Runs the test suite on a sparse unminimized DFA with prefilters enabled.
#[test]
fn sparse_unminimized_prefilter() -> Result<()> {
let my_compiler = |test: &RegexTest, regexes: &[String]| {
// Parse regexes as HIRs so we can get literals to build a prefilter.
let mut hirs = vec![];
for pattern in regexes.iter() {
hirs.push(syntax::parse_with(pattern, &config_syntax(test))?);
}
let kind = match untestify_kind(test.match_kind()) {
None => return Ok(CompiledRegex::skip()),
Some(kind) => kind,
};
let pre = Prefilter::from_hirs_prefix(kind, &hirs);
let mut builder = Regex::builder();
builder.dense(dense::DFA::config().prefilter(pre));
compiler(builder, |builder, _, re| {
let fwd = re.forward().to_sparse()?;
let rev = re.reverse().to_sparse()?;
let re = builder.build_from_dfas(fwd, rev);
Ok(CompiledRegex::compiled(move |test| -> TestResult {
run_test(&re, test)
}))
})(test, regexes)
};
TestRunner::new()?
.expand(EXPANSIONS, |t| t.compiles())
.blacklist("expensive")
.test_iter(suite()?.iter(), my_compiler)
.assert();
Ok(())
}
/// Another basic sanity test that checks we can serialize and then deserialize
/// a regex, and that the resulting regex can be used for searching correctly.
#[test]
fn serialization_unminimized_default() -> Result<()> {
let builder = Regex::builder();
let my_compiler = |builder| {
compiler(builder, |builder, _, re| {
let builder = builder.clone();
let (fwd_bytes, _) = re.forward().to_bytes_native_endian();
let (rev_bytes, _) = re.reverse().to_bytes_native_endian();
Ok(CompiledRegex::compiled(move |test| -> TestResult {
let fwd: dense::DFA<&[u32]> =
dense::DFA::from_bytes(&fwd_bytes).unwrap().0;
let rev: dense::DFA<&[u32]> =
dense::DFA::from_bytes(&rev_bytes).unwrap().0;
let re = builder.build_from_dfas(fwd, rev);
run_test(&re, test)
}))
})
};
TestRunner::new()?
.expand(EXPANSIONS, |t| t.compiles())
.blacklist("expensive")
.test_iter(suite()?.iter(), my_compiler(builder))
.assert();
Ok(())
}
/// A basic sanity test that checks we can serialize and then deserialize a
/// regex using sparse DFAs, and that the resulting regex can be used for
/// searching correctly.
#[test]
fn sparse_serialization_unminimized_default() -> Result<()> {
let builder = Regex::builder();
let my_compiler = |builder| {
compiler(builder, |builder, _, re| {
let builder = builder.clone();
let fwd_bytes = re.forward().to_sparse()?.to_bytes_native_endian();
let rev_bytes = re.reverse().to_sparse()?.to_bytes_native_endian();
Ok(CompiledRegex::compiled(move |test| -> TestResult {
let fwd: sparse::DFA<&[u8]> =
sparse::DFA::from_bytes(&fwd_bytes).unwrap().0;
let rev: sparse::DFA<&[u8]> =
sparse::DFA::from_bytes(&rev_bytes).unwrap().0;
let re = builder.build_from_dfas(fwd, rev);
run_test(&re, test)
}))
})
};
TestRunner::new()?
.expand(EXPANSIONS, |t| t.compiles())
.blacklist("expensive")
.test_iter(suite()?.iter(), my_compiler(builder))
.assert();
Ok(())
}
fn dense_compiler(
builder: dfa::regex::Builder,
) -> impl FnMut(&RegexTest, &[String]) -> Result<CompiledRegex> {
compiler(builder, |_, _, re| {
Ok(CompiledRegex::compiled(move |test| -> TestResult {
run_test(&re, test)
}))
})
}
fn sparse_compiler(
builder: dfa::regex::Builder,
) -> impl FnMut(&RegexTest, &[String]) -> Result<CompiledRegex> {
compiler(builder, |builder, _, re| {
let fwd = re.forward().to_sparse()?;
let rev = re.reverse().to_sparse()?;
let re = builder.build_from_dfas(fwd, rev);
Ok(CompiledRegex::compiled(move |test| -> TestResult {
run_test(&re, test)
}))
})
}
fn compiler(
mut builder: dfa::regex::Builder,
mut create_matcher: impl FnMut(
&dfa::regex::Builder,
Option<Prefilter>,
Regex,
) -> Result<CompiledRegex>,
) -> impl FnMut(&RegexTest, &[String]) -> Result<CompiledRegex> {
move |test, regexes| {
// Parse regexes as HIRs for some analysis below.
let mut hirs = vec![];
for pattern in regexes.iter() {
hirs.push(syntax::parse_with(pattern, &config_syntax(test))?);
}
// Get a prefilter in case the test wants it.
let kind = match untestify_kind(test.match_kind()) {
None => return Ok(CompiledRegex::skip()),
Some(kind) => kind,
};
let pre = Prefilter::from_hirs_prefix(kind, &hirs);
// Check if our regex contains things that aren't supported by DFAs.
// That is, Unicode word boundaries when searching non-ASCII text.
if !test.haystack().is_ascii() {
for hir in hirs.iter() {
if hir.properties().look_set().contains_word_unicode() {
return Ok(CompiledRegex::skip());
}
}
}
if !configure_regex_builder(test, &mut builder) {
return Ok(CompiledRegex::skip());
}
create_matcher(&builder, pre, builder.build_many(®exes)?)
}
}
fn run_test<A: Automaton>(re: &Regex<A>, test: &RegexTest) -> TestResult {
let input = create_input(test);
match test.additional_name() {
"is_match" => TestResult::matched(re.is_match(input.earliest(true))),
"find" => match test.search_kind() {
SearchKind::Earliest | SearchKind::Leftmost => {
let input =
input.earliest(test.search_kind() == SearchKind::Earliest);
TestResult::matches(
re.find_iter(input)
.take(test.match_limit().unwrap_or(std::usize::MAX))
.map(|m| Match {
id: m.pattern().as_usize(),
span: Span { start: m.start(), end: m.end() },
}),
)
}
SearchKind::Overlapping => {
try_search_overlapping(re, &input).unwrap()
}
},
"which" => match test.search_kind() {
SearchKind::Earliest | SearchKind::Leftmost => {
// There are no "which" APIs for standard searches.
TestResult::skip()
}
SearchKind::Overlapping => {
let dfa = re.forward();
let mut patset = PatternSet::new(dfa.pattern_len());
dfa.try_which_overlapping_matches(&input, &mut patset)
.unwrap();
TestResult::which(patset.iter().map(|p| p.as_usize()))
}
},
name => TestResult::fail(&format!("unrecognized test name: {}", name)),
}
}
/// Configures the given regex builder with all relevant settings on the given
/// regex test.
///
/// If the regex test has a setting that is unsupported, then this returns
/// false (implying the test should be skipped).
fn configure_regex_builder(
test: &RegexTest,
builder: &mut dfa::regex::Builder,
) -> bool {
let match_kind = match untestify_kind(test.match_kind()) {
None => return false,
Some(k) => k,
};
let starts = if test.anchored() {
StartKind::Anchored
} else {
StartKind::Unanchored
};
let mut dense_config = dense::Config::new()
.start_kind(starts)
.match_kind(match_kind)
.unicode_word_boundary(true);
// When doing an overlapping search, we might try to find the start of each
// match with a custom search routine. In that case, we need to tell the
// reverse search (for the start offset) which pattern to look for. The
// only way that API works is when anchored starting states are compiled
// for each pattern. This does technically also enable it for the forward
// DFA, but we're okay with that.
if test.search_kind() == SearchKind::Overlapping {
dense_config = dense_config.starts_for_each_pattern(true);
}
builder
.syntax(config_syntax(test))
.thompson(config_thompson(test))
.dense(dense_config);
true
}
/// Configuration of a Thompson NFA compiler from a regex test.
fn config_thompson(test: &RegexTest) -> thompson::Config {
let mut lookm = regex_automata::util::look::LookMatcher::new();
lookm.set_line_terminator(test.line_terminator());
thompson::Config::new().utf8(test.utf8()).look_matcher(lookm)
}
/// Configuration of the regex syntax from a regex test.
fn config_syntax(test: &RegexTest) -> syntax::Config {
syntax::Config::new()
.case_insensitive(test.case_insensitive())
.unicode(test.unicode())
.utf8(test.utf8())
.line_terminator(test.line_terminator())
}
/// Execute an overlapping search, and for each match found, also find its
/// overlapping starting positions.
///
/// N.B. This routine used to be part of the crate API, but 1) it wasn't clear
/// to me how useful it was and 2) it wasn't clear to me what its semantics
/// should be. In particular, a potentially surprising footgun of this routine
/// that it is worst case *quadratic* in the size of the haystack. Namely, it's
/// possible to report a match at every position, and for every such position,
/// scan all the way to the beginning of the haystack to find the starting
/// position. Typical leftmost non-overlapping searches don't suffer from this
/// because, well, matches can't overlap. So subsequent searches after a match
/// is found don't revisit previously scanned parts of the haystack.
///
/// Its semantics can be strange for other reasons too. For example, given
/// the regex '.*' and the haystack 'zz', the full set of overlapping matches
/// is: [0, 0], [1, 1], [0, 1], [2, 2], [1, 2], [0, 2]. The ordering of
/// those matches is quite strange, but makes sense when you think about the
/// implementation: an end offset is found left-to-right, and then one or more
/// starting offsets are found right-to-left.
///
/// Nevertheless, we provide this routine in our test suite because it's
/// useful to test the low level DFA overlapping search and our test suite
/// is written in a way that requires starting offsets.
fn try_search_overlapping<A: Automaton>(
re: &Regex<A>,
input: &Input<'_>,
) -> Result<TestResult> {
let mut matches = vec![];
let mut fwd_state = OverlappingState::start();
let (fwd_dfa, rev_dfa) = (re.forward(), re.reverse());
while let Some(end) = {
fwd_dfa.try_search_overlapping_fwd(input, &mut fwd_state)?;
fwd_state.get_match()
} {
let revsearch = input
.clone()
.range(input.start()..end.offset())
.anchored(Anchored::Pattern(end.pattern()))
.earliest(false);
let mut rev_state = OverlappingState::start();
while let Some(start) = {
rev_dfa.try_search_overlapping_rev(&revsearch, &mut rev_state)?;
rev_state.get_match()
} {
let span = Span { start: start.offset(), end: end.offset() };
let mat = Match { id: end.pattern().as_usize(), span };
matches.push(mat);
}
}
Ok(TestResult::matches(matches))
}
Codebase Browser
chromium