/* Copyright (C) 1995-1998 Eric Young ([email protected]) * All rights reserved. * * This package is an SSL implementation written * by Eric Young ([email protected]). * The implementation was written so as to conform with Netscapes SSL. * * This library is free for commercial and non-commercial use as long as * the following conditions are aheared to. The following conditions * apply to all code found in this distribution, be it the RC4, RSA, * lhash, DES, etc., code; not just the SSL code. The SSL documentation * included with this distribution is covered by the same copyright terms * except that the holder is Tim Hudson ([email protected]). * * Copyright remains Eric Young's, and as such any Copyright notices in * the code are not to be removed. * If this package is used in a product, Eric Young should be given attribution * as the author of the parts of the library used. * This can be in the form of a textual message at program startup or * in documentation (online or textual) provided with the package. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * "This product includes cryptographic software written by * Eric Young ([email protected])" * The word 'cryptographic' can be left out if the rouines from the library * being used are not cryptographic related :-). * 4. If you include any Windows specific code (or a derivative thereof) from * the apps directory (application code) you must include an acknowledgement: * "This product includes software written by Tim Hudson ([email protected])" * * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * The licence and distribution terms for any publically available version or * derivative of this code cannot be changed. i.e. this code cannot simply be * copied and put under another distribution licence * [including the GNU Public Licence.] */ #ifndef OPENSSL_HEADER_CIPHER_H #define OPENSSL_HEADER_CIPHER_H #include <openssl/base.h> #if defined(__cplusplus) extern "C" { #endif // Ciphers. // Cipher primitives. // // The following functions return |EVP_CIPHER| objects that implement the named // cipher algorithm. OPENSSL_EXPORT const EVP_CIPHER *EVP_rc4(void); OPENSSL_EXPORT const EVP_CIPHER *EVP_des_cbc(void); OPENSSL_EXPORT const EVP_CIPHER *EVP_des_ecb(void); OPENSSL_EXPORT const EVP_CIPHER *EVP_des_ede(void); OPENSSL_EXPORT const EVP_CIPHER *EVP_des_ede3(void); OPENSSL_EXPORT const EVP_CIPHER *EVP_des_ede_cbc(void); OPENSSL_EXPORT const EVP_CIPHER *EVP_des_ede3_cbc(void); OPENSSL_EXPORT const EVP_CIPHER *EVP_aes_128_ecb(void); OPENSSL_EXPORT const EVP_CIPHER *EVP_aes_128_cbc(void); OPENSSL_EXPORT const EVP_CIPHER *EVP_aes_128_ctr(void); OPENSSL_EXPORT const EVP_CIPHER *EVP_aes_128_ofb(void); OPENSSL_EXPORT const EVP_CIPHER *EVP_aes_256_ecb(void); OPENSSL_EXPORT const EVP_CIPHER *EVP_aes_256_cbc(void); OPENSSL_EXPORT const EVP_CIPHER *EVP_aes_256_ctr(void); OPENSSL_EXPORT const EVP_CIPHER *EVP_aes_256_ofb(void); OPENSSL_EXPORT const EVP_CIPHER *EVP_aes_256_xts(void); // EVP_enc_null returns a 'cipher' that passes plaintext through as // ciphertext. OPENSSL_EXPORT const EVP_CIPHER *EVP_enc_null(void); // EVP_rc2_cbc returns a cipher that implements 128-bit RC2 in CBC mode. OPENSSL_EXPORT const EVP_CIPHER *EVP_rc2_cbc(void); // EVP_rc2_40_cbc returns a cipher that implements 40-bit RC2 in CBC mode. This // is obviously very, very weak and is included only in order to read PKCS#12 // files, which often encrypt the certificate chain using this cipher. It is // deliberately not exported. const EVP_CIPHER *EVP_rc2_40_cbc(void); // EVP_get_cipherbynid returns the cipher corresponding to the given NID, or // NULL if no such cipher is known. Note using this function links almost every // cipher implemented by BoringSSL into the binary, whether the caller uses them // or not. Size-conscious callers, such as client software, should not use this // function. OPENSSL_EXPORT const EVP_CIPHER *EVP_get_cipherbynid(int nid); // Cipher context allocation. // // An |EVP_CIPHER_CTX| represents the state of an encryption or decryption in // progress. // EVP_CIPHER_CTX_init initialises an, already allocated, |EVP_CIPHER_CTX|. OPENSSL_EXPORT void EVP_CIPHER_CTX_init(EVP_CIPHER_CTX *ctx); // EVP_CIPHER_CTX_new allocates a fresh |EVP_CIPHER_CTX|, calls // |EVP_CIPHER_CTX_init| and returns it, or NULL on allocation failure. OPENSSL_EXPORT EVP_CIPHER_CTX *EVP_CIPHER_CTX_new(void); // EVP_CIPHER_CTX_cleanup frees any memory referenced by |ctx|. It returns // one. OPENSSL_EXPORT int EVP_CIPHER_CTX_cleanup(EVP_CIPHER_CTX *ctx); // EVP_CIPHER_CTX_free calls |EVP_CIPHER_CTX_cleanup| on |ctx| and then frees // |ctx| itself. OPENSSL_EXPORT void EVP_CIPHER_CTX_free(EVP_CIPHER_CTX *ctx); // EVP_CIPHER_CTX_copy sets |out| to be a duplicate of the current state of // |in|. The |out| argument must have been previously initialised. OPENSSL_EXPORT int EVP_CIPHER_CTX_copy(EVP_CIPHER_CTX *out, const EVP_CIPHER_CTX *in); // EVP_CIPHER_CTX_reset calls |EVP_CIPHER_CTX_cleanup| followed by // |EVP_CIPHER_CTX_init| and returns one. OPENSSL_EXPORT int EVP_CIPHER_CTX_reset(EVP_CIPHER_CTX *ctx); // Cipher context configuration. // EVP_CipherInit_ex configures |ctx| for a fresh encryption (or decryption, if // |enc| is zero) operation using |cipher|. If |ctx| has been previously // configured with a cipher then |cipher|, |key| and |iv| may be |NULL| and // |enc| may be -1 to reuse the previous values. The operation will use |key| // as the key and |iv| as the IV (if any). These should have the correct // lengths given by |EVP_CIPHER_key_length| and |EVP_CIPHER_iv_length|. It // returns one on success and zero on error. OPENSSL_EXPORT int EVP_CipherInit_ex(EVP_CIPHER_CTX *ctx, const EVP_CIPHER *cipher, ENGINE *engine, const uint8_t *key, const uint8_t *iv, int enc); // EVP_EncryptInit_ex calls |EVP_CipherInit_ex| with |enc| equal to one. OPENSSL_EXPORT int EVP_EncryptInit_ex(EVP_CIPHER_CTX *ctx, const EVP_CIPHER *cipher, ENGINE *impl, const uint8_t *key, const uint8_t *iv); // EVP_DecryptInit_ex calls |EVP_CipherInit_ex| with |enc| equal to zero. OPENSSL_EXPORT int EVP_DecryptInit_ex(EVP_CIPHER_CTX *ctx, const EVP_CIPHER *cipher, ENGINE *impl, const uint8_t *key, const uint8_t *iv); // Cipher operations. // EVP_EncryptUpdate encrypts |in_len| bytes from |in| to |out|. The number // of output bytes may be up to |in_len| plus the block length minus one and // |out| must have sufficient space. The number of bytes actually output is // written to |*out_len|. It returns one on success and zero otherwise. // // If |ctx| is an AEAD cipher, e.g. |EVP_aes_128_gcm|, and |out| is NULL, this // function instead adds |in_len| bytes from |in| to the AAD and sets |*out_len| // to |in_len|. The AAD must be fully specified in this way before this function // is used to encrypt plaintext. OPENSSL_EXPORT int EVP_EncryptUpdate(EVP_CIPHER_CTX *ctx, uint8_t *out, int *out_len, const uint8_t *in, int in_len); // EVP_EncryptFinal_ex writes at most a block of ciphertext to |out| and sets // |*out_len| to the number of bytes written. If padding is enabled (the // default) then standard padding is applied to create the final block. If // padding is disabled (with |EVP_CIPHER_CTX_set_padding|) then any partial // block remaining will cause an error. The function returns one on success and // zero otherwise. OPENSSL_EXPORT int EVP_EncryptFinal_ex(EVP_CIPHER_CTX *ctx, uint8_t *out, int *out_len); // EVP_DecryptUpdate decrypts |in_len| bytes from |in| to |out|. The number of // output bytes may be up to |in_len| plus the block length minus one and |out| // must have sufficient space. The number of bytes actually output is written // to |*out_len|. It returns one on success and zero otherwise. // // If |ctx| is an AEAD cipher, e.g. |EVP_aes_128_gcm|, and |out| is NULL, this // function instead adds |in_len| bytes from |in| to the AAD and sets |*out_len| // to |in_len|. The AAD must be fully specified in this way before this function // is used to decrypt ciphertext. OPENSSL_EXPORT int EVP_DecryptUpdate(EVP_CIPHER_CTX *ctx, uint8_t *out, int *out_len, const uint8_t *in, int in_len); // EVP_DecryptFinal_ex writes at most a block of ciphertext to |out| and sets // |*out_len| to the number of bytes written. If padding is enabled (the // default) then padding is removed from the final block. // // WARNING: it is unsafe to call this function with unauthenticated // ciphertext if padding is enabled. OPENSSL_EXPORT int EVP_DecryptFinal_ex(EVP_CIPHER_CTX *ctx, uint8_t *out, int *out_len); // EVP_CipherUpdate calls either |EVP_EncryptUpdate| or |EVP_DecryptUpdate| // depending on how |ctx| has been setup. OPENSSL_EXPORT int EVP_CipherUpdate(EVP_CIPHER_CTX *ctx, uint8_t *out, int *out_len, const uint8_t *in, int in_len); // EVP_CipherFinal_ex calls either |EVP_EncryptFinal_ex| or // |EVP_DecryptFinal_ex| depending on how |ctx| has been setup. OPENSSL_EXPORT int EVP_CipherFinal_ex(EVP_CIPHER_CTX *ctx, uint8_t *out, int *out_len); // Cipher context accessors. // EVP_CIPHER_CTX_cipher returns the |EVP_CIPHER| underlying |ctx|, or NULL if // none has been set. OPENSSL_EXPORT const EVP_CIPHER *EVP_CIPHER_CTX_cipher( const EVP_CIPHER_CTX *ctx); // EVP_CIPHER_CTX_nid returns a NID identifying the |EVP_CIPHER| underlying // |ctx| (e.g. |NID_aes_128_gcm|). It will crash if no cipher has been // configured. OPENSSL_EXPORT int EVP_CIPHER_CTX_nid(const EVP_CIPHER_CTX *ctx); // EVP_CIPHER_CTX_encrypting returns one if |ctx| is configured for encryption // and zero otherwise. OPENSSL_EXPORT int EVP_CIPHER_CTX_encrypting(const EVP_CIPHER_CTX *ctx); // EVP_CIPHER_CTX_block_size returns the block size, in bytes, of the cipher // underlying |ctx|, or one if the cipher is a stream cipher. It will crash if // no cipher has been configured. OPENSSL_EXPORT unsigned EVP_CIPHER_CTX_block_size(const EVP_CIPHER_CTX *ctx); // EVP_CIPHER_CTX_key_length returns the key size, in bytes, of the cipher // underlying |ctx| or zero if no cipher has been configured. OPENSSL_EXPORT unsigned EVP_CIPHER_CTX_key_length(const EVP_CIPHER_CTX *ctx); // EVP_CIPHER_CTX_iv_length returns the IV size, in bytes, of the cipher // underlying |ctx|. It will crash if no cipher has been configured. OPENSSL_EXPORT unsigned EVP_CIPHER_CTX_iv_length(const EVP_CIPHER_CTX *ctx); // EVP_CIPHER_CTX_get_app_data returns the opaque, application data pointer for // |ctx|, or NULL if none has been set. OPENSSL_EXPORT void *EVP_CIPHER_CTX_get_app_data(const EVP_CIPHER_CTX *ctx); // EVP_CIPHER_CTX_set_app_data sets the opaque, application data pointer for // |ctx| to |data|. OPENSSL_EXPORT void EVP_CIPHER_CTX_set_app_data(EVP_CIPHER_CTX *ctx, void *data); // EVP_CIPHER_CTX_flags returns a value which is the OR of zero or more // |EVP_CIPH_*| flags. It will crash if no cipher has been configured. OPENSSL_EXPORT uint32_t EVP_CIPHER_CTX_flags(const EVP_CIPHER_CTX *ctx); // EVP_CIPHER_CTX_mode returns one of the |EVP_CIPH_*| cipher mode values // enumerated below. It will crash if no cipher has been configured. OPENSSL_EXPORT uint32_t EVP_CIPHER_CTX_mode(const EVP_CIPHER_CTX *ctx); // EVP_CIPHER_CTX_ctrl is an |ioctl| like function. The |command| argument // should be one of the |EVP_CTRL_*| values. The |arg| and |ptr| arguments are // specific to the command in question. OPENSSL_EXPORT int EVP_CIPHER_CTX_ctrl(EVP_CIPHER_CTX *ctx, int command, int arg, void *ptr); // EVP_CIPHER_CTX_set_padding sets whether padding is enabled for |ctx| and // returns one. Pass a non-zero |pad| to enable padding (the default) or zero // to disable. OPENSSL_EXPORT int EVP_CIPHER_CTX_set_padding(EVP_CIPHER_CTX *ctx, int pad); // EVP_CIPHER_CTX_set_key_length sets the key length for |ctx|. This is only // valid for ciphers that can take a variable length key. It returns one on // success and zero on error. OPENSSL_EXPORT int EVP_CIPHER_CTX_set_key_length(EVP_CIPHER_CTX *ctx, unsigned key_len); // Cipher accessors. // EVP_CIPHER_nid returns a NID identifying |cipher|. (For example, // |NID_aes_128_gcm|.) OPENSSL_EXPORT int EVP_CIPHER_nid(const EVP_CIPHER *cipher); // EVP_CIPHER_block_size returns the block size, in bytes, for |cipher|, or one // if |cipher| is a stream cipher. OPENSSL_EXPORT unsigned EVP_CIPHER_block_size(const EVP_CIPHER *cipher); // EVP_CIPHER_key_length returns the key size, in bytes, for |cipher|. If // |cipher| can take a variable key length then this function returns the // default key length and |EVP_CIPHER_flags| will return a value with // |EVP_CIPH_VARIABLE_LENGTH| set. OPENSSL_EXPORT unsigned EVP_CIPHER_key_length(const EVP_CIPHER *cipher); // EVP_CIPHER_iv_length returns the IV size, in bytes, of |cipher|, or zero if // |cipher| doesn't take an IV. OPENSSL_EXPORT unsigned EVP_CIPHER_iv_length(const EVP_CIPHER *cipher); // EVP_CIPHER_flags returns a value which is the OR of zero or more // |EVP_CIPH_*| flags. OPENSSL_EXPORT uint32_t EVP_CIPHER_flags(const EVP_CIPHER *cipher); // EVP_CIPHER_mode returns one of the cipher mode values enumerated below. OPENSSL_EXPORT uint32_t EVP_CIPHER_mode(const EVP_CIPHER *cipher); // Key derivation. // EVP_BytesToKey generates a key and IV for the cipher |type| by iterating // |md| |count| times using |data| and |salt|. On entry, the |key| and |iv| // buffers must have enough space to hold a key and IV for |type|. It returns // the length of the key on success or zero on error. OPENSSL_EXPORT int EVP_BytesToKey(const EVP_CIPHER *type, const EVP_MD *md, const uint8_t *salt, const uint8_t *data, size_t data_len, unsigned count, uint8_t *key, uint8_t *iv); // Cipher modes (for |EVP_CIPHER_mode|). #define EVP_CIPH_STREAM_CIPHER … #define EVP_CIPH_ECB_MODE … #define EVP_CIPH_CBC_MODE … #define EVP_CIPH_CFB_MODE … #define EVP_CIPH_OFB_MODE … #define EVP_CIPH_CTR_MODE … #define EVP_CIPH_GCM_MODE … #define EVP_CIPH_XTS_MODE … // The following values are never returned from |EVP_CIPHER_mode| and are // included only to make it easier to compile code with BoringSSL. #define EVP_CIPH_CCM_MODE … #define EVP_CIPH_OCB_MODE … #define EVP_CIPH_WRAP_MODE … // Cipher flags (for |EVP_CIPHER_flags|). // EVP_CIPH_VARIABLE_LENGTH indicates that the cipher takes a variable length // key. #define EVP_CIPH_VARIABLE_LENGTH … // EVP_CIPH_ALWAYS_CALL_INIT indicates that the |init| function for the cipher // should always be called when initialising a new operation, even if the key // is NULL to indicate that the same key is being used. #define EVP_CIPH_ALWAYS_CALL_INIT … // EVP_CIPH_CUSTOM_IV indicates that the cipher manages the IV itself rather // than keeping it in the |iv| member of |EVP_CIPHER_CTX|. #define EVP_CIPH_CUSTOM_IV … // EVP_CIPH_CTRL_INIT indicates that EVP_CTRL_INIT should be used when // initialising an |EVP_CIPHER_CTX|. #define EVP_CIPH_CTRL_INIT … // EVP_CIPH_FLAG_CUSTOM_CIPHER indicates that the cipher manages blocking // itself. This causes EVP_(En|De)crypt_ex to be simple wrapper functions. #define EVP_CIPH_FLAG_CUSTOM_CIPHER … // EVP_CIPH_FLAG_AEAD_CIPHER specifies that the cipher is an AEAD. This is an // older version of the proper AEAD interface. See aead.h for the current // one. #define EVP_CIPH_FLAG_AEAD_CIPHER … // EVP_CIPH_CUSTOM_COPY indicates that the |ctrl| callback should be called // with |EVP_CTRL_COPY| at the end of normal |EVP_CIPHER_CTX_copy| // processing. #define EVP_CIPH_CUSTOM_COPY … // EVP_CIPH_FLAG_NON_FIPS_ALLOW is meaningless. In OpenSSL it permits non-FIPS // algorithms in FIPS mode. But BoringSSL FIPS mode doesn't prohibit algorithms // (it's up the the caller to use the FIPS module in a fashion compliant with // their needs). Thus this exists only to allow code to compile. #define EVP_CIPH_FLAG_NON_FIPS_ALLOW … // Deprecated functions // EVP_CipherInit acts like EVP_CipherInit_ex except that |EVP_CIPHER_CTX_init| // is called on |cipher| first, if |cipher| is not NULL. OPENSSL_EXPORT int EVP_CipherInit(EVP_CIPHER_CTX *ctx, const EVP_CIPHER *cipher, const uint8_t *key, const uint8_t *iv, int enc); // EVP_EncryptInit calls |EVP_CipherInit| with |enc| equal to one. OPENSSL_EXPORT int EVP_EncryptInit(EVP_CIPHER_CTX *ctx, const EVP_CIPHER *cipher, const uint8_t *key, const uint8_t *iv); // EVP_DecryptInit calls |EVP_CipherInit| with |enc| equal to zero. OPENSSL_EXPORT int EVP_DecryptInit(EVP_CIPHER_CTX *ctx, const EVP_CIPHER *cipher, const uint8_t *key, const uint8_t *iv); // EVP_CipherFinal calls |EVP_CipherFinal_ex|. OPENSSL_EXPORT int EVP_CipherFinal(EVP_CIPHER_CTX *ctx, uint8_t *out, int *out_len); // EVP_EncryptFinal calls |EVP_EncryptFinal_ex|. OPENSSL_EXPORT int EVP_EncryptFinal(EVP_CIPHER_CTX *ctx, uint8_t *out, int *out_len); // EVP_DecryptFinal calls |EVP_DecryptFinal_ex|. OPENSSL_EXPORT int EVP_DecryptFinal(EVP_CIPHER_CTX *ctx, uint8_t *out, int *out_len); // EVP_Cipher historically exposed an internal implementation detail of |ctx| // and should not be used. Use |EVP_CipherUpdate| and |EVP_CipherFinal_ex| // instead. // // If |ctx|'s cipher does not have the |EVP_CIPH_FLAG_CUSTOM_CIPHER| flag, it // encrypts or decrypts |in_len| bytes from |in| and writes the resulting // |in_len| bytes to |out|. It returns one on success and zero on error. // |in_len| must be a multiple of the cipher's block size, or the behavior is // undefined. // // TODO(davidben): Rather than being undefined (it'll often round the length up // and likely read past the buffer), just fail the operation. // // If |ctx|'s cipher has the |EVP_CIPH_FLAG_CUSTOM_CIPHER| flag, it runs in one // of two modes: If |in| is non-NULL, it behaves like |EVP_CipherUpdate|. If // |in| is NULL, it behaves like |EVP_CipherFinal_ex|. In both cases, it returns // |*out_len| on success and -1 on error. // // WARNING: The two possible calling conventions of this function signal errors // incompatibly. In the first, zero indicates an error. In the second, zero // indicates success with zero bytes of output. OPENSSL_EXPORT int EVP_Cipher(EVP_CIPHER_CTX *ctx, uint8_t *out, const uint8_t *in, size_t in_len); // EVP_add_cipher_alias does nothing and returns one. OPENSSL_EXPORT int EVP_add_cipher_alias(const char *a, const char *b); // EVP_get_cipherbyname returns an |EVP_CIPHER| given a human readable name in // |name|, or NULL if the name is unknown. Note using this function links almost // every cipher implemented by BoringSSL into the binary, not just the ones the // caller requests. Size-conscious callers, such as client software, should not // use this function. OPENSSL_EXPORT const EVP_CIPHER *EVP_get_cipherbyname(const char *name); // These AEADs are deprecated AES-GCM implementations that set // |EVP_CIPH_FLAG_CUSTOM_CIPHER|. Use |EVP_aead_aes_128_gcm| and // |EVP_aead_aes_256_gcm| instead. // // WARNING: Although these APIs allow streaming an individual AES-GCM operation, // this is not secure. Until calling |EVP_DecryptFinal_ex|, the tag has not yet // been checked and output released by |EVP_DecryptUpdate| is unauthenticated // and easily manipulated by attackers. Callers must buffer the output and may // not act on it until the entire operation is complete. OPENSSL_EXPORT const EVP_CIPHER *EVP_aes_128_gcm(void); OPENSSL_EXPORT const EVP_CIPHER *EVP_aes_256_gcm(void); // These are deprecated, 192-bit version of AES. OPENSSL_EXPORT const EVP_CIPHER *EVP_aes_192_ecb(void); OPENSSL_EXPORT const EVP_CIPHER *EVP_aes_192_cbc(void); OPENSSL_EXPORT const EVP_CIPHER *EVP_aes_192_ctr(void); OPENSSL_EXPORT const EVP_CIPHER *EVP_aes_192_gcm(void); OPENSSL_EXPORT const EVP_CIPHER *EVP_aes_192_ofb(void); // EVP_des_ede3_ecb is an alias for |EVP_des_ede3|. Use the former instead. OPENSSL_EXPORT const EVP_CIPHER *EVP_des_ede3_ecb(void); // EVP_aes_128_cfb128 is only available in decrepit. OPENSSL_EXPORT const EVP_CIPHER *EVP_aes_128_cfb128(void); // EVP_aes_128_cfb is an alias for |EVP_aes_128_cfb128| and is only available in // decrepit. OPENSSL_EXPORT const EVP_CIPHER *EVP_aes_128_cfb(void); // EVP_aes_192_cfb128 is only available in decrepit. OPENSSL_EXPORT const EVP_CIPHER *EVP_aes_192_cfb128(void); // EVP_aes_192_cfb is an alias for |EVP_aes_192_cfb128| and is only available in // decrepit. OPENSSL_EXPORT const EVP_CIPHER *EVP_aes_192_cfb(void); // EVP_aes_256_cfb128 is only available in decrepit. OPENSSL_EXPORT const EVP_CIPHER *EVP_aes_256_cfb128(void); // EVP_aes_256_cfb is an alias for |EVP_aes_256_cfb128| and is only available in // decrepit. OPENSSL_EXPORT const EVP_CIPHER *EVP_aes_256_cfb(void); // EVP_bf_ecb is Blowfish in ECB mode and is only available in decrepit. OPENSSL_EXPORT const EVP_CIPHER *EVP_bf_ecb(void); // EVP_bf_cbc is Blowfish in CBC mode and is only available in decrepit. OPENSSL_EXPORT const EVP_CIPHER *EVP_bf_cbc(void); // EVP_bf_cfb is Blowfish in 64-bit CFB mode and is only available in decrepit. OPENSSL_EXPORT const EVP_CIPHER *EVP_bf_cfb(void); // EVP_cast5_ecb is CAST5 in ECB mode and is only available in decrepit. OPENSSL_EXPORT const EVP_CIPHER *EVP_cast5_ecb(void); // EVP_cast5_cbc is CAST5 in CBC mode and is only available in decrepit. OPENSSL_EXPORT const EVP_CIPHER *EVP_cast5_cbc(void); // The following flags do nothing and are included only to make it easier to // compile code with BoringSSL. #define EVP_CIPHER_CTX_FLAG_WRAP_ALLOW … // EVP_CIPHER_CTX_set_flags does nothing. OPENSSL_EXPORT void EVP_CIPHER_CTX_set_flags(const EVP_CIPHER_CTX *ctx, uint32_t flags); // Private functions. // EVP_CIPH_NO_PADDING disables padding in block ciphers. #define EVP_CIPH_NO_PADDING … // The following are |EVP_CIPHER_CTX_ctrl| commands. #define EVP_CTRL_INIT … #define EVP_CTRL_SET_KEY_LENGTH … #define EVP_CTRL_GET_RC2_KEY_BITS … #define EVP_CTRL_SET_RC2_KEY_BITS … #define EVP_CTRL_GET_RC5_ROUNDS … #define EVP_CTRL_SET_RC5_ROUNDS … #define EVP_CTRL_RAND_KEY … #define EVP_CTRL_PBE_PRF_NID … #define EVP_CTRL_COPY … #define EVP_CTRL_AEAD_SET_IVLEN … #define EVP_CTRL_AEAD_GET_TAG … #define EVP_CTRL_AEAD_SET_TAG … #define EVP_CTRL_AEAD_SET_IV_FIXED … #define EVP_CTRL_GCM_IV_GEN … #define EVP_CTRL_AEAD_SET_MAC_KEY … // EVP_CTRL_GCM_SET_IV_INV sets the GCM invocation field, decrypt only #define EVP_CTRL_GCM_SET_IV_INV … #define EVP_CTRL_GET_IVLEN … // The following constants are unused. #define EVP_GCM_TLS_FIXED_IV_LEN … #define EVP_GCM_TLS_EXPLICIT_IV_LEN … #define EVP_GCM_TLS_TAG_LEN … // The following are legacy aliases for AEAD |EVP_CIPHER_CTX_ctrl| values. #define EVP_CTRL_GCM_SET_IVLEN … #define EVP_CTRL_GCM_GET_TAG … #define EVP_CTRL_GCM_SET_TAG … #define EVP_CTRL_GCM_SET_IV_FIXED … #define EVP_MAX_KEY_LENGTH … #define EVP_MAX_IV_LENGTH … #define EVP_MAX_BLOCK_LENGTH … struct evp_cipher_ctx_st { … } /* EVP_CIPHER_CTX */; EVP_CIPHER_INFO; #if defined(__cplusplus) } // extern C #if !defined(BORINGSSL_NO_CXX) extern "C++" { BSSL_NAMESPACE_BEGIN BORINGSSL_MAKE_DELETER(…) ScopedEVP_CIPHER_CTX; BSSL_NAMESPACE_END } // extern C++ #endif #endif #define CIPHER_R_AES_KEY_SETUP_FAILED … #define CIPHER_R_BAD_DECRYPT … #define CIPHER_R_BAD_KEY_LENGTH … #define CIPHER_R_BUFFER_TOO_SMALL … #define CIPHER_R_CTRL_NOT_IMPLEMENTED … #define CIPHER_R_CTRL_OPERATION_NOT_IMPLEMENTED … #define CIPHER_R_DATA_NOT_MULTIPLE_OF_BLOCK_LENGTH … #define CIPHER_R_INITIALIZATION_ERROR … #define CIPHER_R_INPUT_NOT_INITIALIZED … #define CIPHER_R_INVALID_AD_SIZE … #define CIPHER_R_INVALID_KEY_LENGTH … #define CIPHER_R_INVALID_NONCE_SIZE … #define CIPHER_R_INVALID_OPERATION … #define CIPHER_R_IV_TOO_LARGE … #define CIPHER_R_NO_CIPHER_SET … #define CIPHER_R_OUTPUT_ALIASES_INPUT … #define CIPHER_R_TAG_TOO_LARGE … #define CIPHER_R_TOO_LARGE … #define CIPHER_R_UNSUPPORTED_AD_SIZE … #define CIPHER_R_UNSUPPORTED_INPUT_SIZE … #define CIPHER_R_UNSUPPORTED_KEY_SIZE … #define CIPHER_R_UNSUPPORTED_NONCE_SIZE … #define CIPHER_R_UNSUPPORTED_TAG_SIZE … #define CIPHER_R_WRONG_FINAL_BLOCK_LENGTH … #define CIPHER_R_NO_DIRECTION_SET … #define CIPHER_R_INVALID_NONCE … #endif // OPENSSL_HEADER_CIPHER_H
Codebase Browser
chromium