and-05.ll | Explore in Territory

; Test ANDs of a constant into a byte of memory.
;
; RUN: llc < %s -mtriple=s390x-linux-gnu | FileCheck %s

; Check the lowest useful constant, expressed as a signed integer.
define void @f1(ptr %ptr) {
; CHECK-LABEL: f1:
; CHECK: ni 0(%r2), 1
; CHECK: br %r14
  %val = load i8, ptr %ptr
  %and = and i8 %val, -255
  store i8 %and, ptr %ptr
  ret void
}

; Check the highest useful constant, expressed as a signed integer.
define void @f2(ptr %ptr) {
; CHECK-LABEL: f2:
; CHECK: ni 0(%r2), 254
; CHECK: br %r14
  %val = load i8, ptr %ptr
  %and = and i8 %val, -2
  store i8 %and, ptr %ptr
  ret void
}

; Check the lowest useful constant, expressed as an unsigned integer.
define void @f3(ptr %ptr) {
; CHECK-LABEL: f3:
; CHECK: ni 0(%r2), 1
; CHECK: br %r14
  %val = load i8, ptr %ptr
  %and = and i8 %val, 1
  store i8 %and, ptr %ptr
  ret void
}

; Check the highest useful constant, expressed as a unsigned integer.
define void @f4(ptr %ptr) {
; CHECK-LABEL: f4:
; CHECK: ni 0(%r2), 254
; CHECK: br %r14
  %val = load i8, ptr %ptr
  %and = and i8 %val, 254
  store i8 %and, ptr %ptr
  ret void
}

; Check the high end of the NI range.
define void @f5(ptr %src) {
; CHECK-LABEL: f5:
; CHECK: ni 4095(%r2), 127
; CHECK: br %r14
  %ptr = getelementptr i8, ptr %src, i64 4095
  %val = load i8, ptr %ptr
  %and = and i8 %val, 127
  store i8 %and, ptr %ptr
  ret void
}

; Check the next byte up, which should use NIY instead of NI.
define void @f6(ptr %src) {
; CHECK-LABEL: f6:
; CHECK: niy 4096(%r2), 127
; CHECK: br %r14
  %ptr = getelementptr i8, ptr %src, i64 4096
  %val = load i8, ptr %ptr
  %and = and i8 %val, 127
  store i8 %and, ptr %ptr
  ret void
}

; Check the high end of the NIY range.
define void @f7(ptr %src) {
; CHECK-LABEL: f7:
; CHECK: niy 524287(%r2), 127
; CHECK: br %r14
  %ptr = getelementptr i8, ptr %src, i64 524287
  %val = load i8, ptr %ptr
  %and = and i8 %val, 127
  store i8 %and, ptr %ptr
  ret void
}

; Check the next byte up, which needs separate address logic.
; Other sequences besides this one would be OK.
define void @f8(ptr %src) {
; CHECK-LABEL: f8:
; CHECK: agfi %r2, 524288
; CHECK: ni 0(%r2), 127
; CHECK: br %r14
  %ptr = getelementptr i8, ptr %src, i64 524288
  %val = load i8, ptr %ptr
  %and = and i8 %val, 127
  store i8 %and, ptr %ptr
  ret void
}

; Check the high end of the negative NIY range.
define void @f9(ptr %src) {
; CHECK-LABEL: f9:
; CHECK: niy -1(%r2), 127
; CHECK: br %r14
  %ptr = getelementptr i8, ptr %src, i64 -1
  %val = load i8, ptr %ptr
  %and = and i8 %val, 127
  store i8 %and, ptr %ptr
  ret void
}

; Check the low end of the NIY range.
define void @f10(ptr %src) {
; CHECK-LABEL: f10:
; CHECK: niy -524288(%r2), 127
; CHECK: br %r14
  %ptr = getelementptr i8, ptr %src, i64 -524288
  %val = load i8, ptr %ptr
  %and = and i8 %val, 127
  store i8 %and, ptr %ptr
  ret void
}

; Check the next byte down, which needs separate address logic.
; Other sequences besides this one would be OK.
define void @f11(ptr %src) {
; CHECK-LABEL: f11:
; CHECK: agfi %r2, -524289
; CHECK: ni 0(%r2), 127
; CHECK: br %r14
  %ptr = getelementptr i8, ptr %src, i64 -524289
  %val = load i8, ptr %ptr
  %and = and i8 %val, 127
  store i8 %and, ptr %ptr
  ret void
}

; Check that NI does not allow an index
define void @f12(i64 %src, i64 %index) {
; CHECK-LABEL: f12:
; CHECK: agr %r2, %r3
; CHECK: ni 4095(%r2), 127
; CHECK: br %r14
  %add1 = add i64 %src, %index
  %add2 = add i64 %add1, 4095
  %ptr = inttoptr i64 %add2 to ptr
  %val = load i8, ptr %ptr
  %and = and i8 %val, 127
  store i8 %and, ptr %ptr
  ret void
}

; Check that NIY does not allow an index
define void @f13(i64 %src, i64 %index) {
; CHECK-LABEL: f13:
; CHECK: agr %r2, %r3
; CHECK: niy 4096(%r2), 127
; CHECK: br %r14
  %add1 = add i64 %src, %index
  %add2 = add i64 %add1, 4096
  %ptr = inttoptr i64 %add2 to ptr
  %val = load i8, ptr %ptr
  %and = and i8 %val, 127
  store i8 %and, ptr %ptr
  ret void
}
llvm/llvm/test/CodeGen/SystemZ/and-05.ll
